The GNU gdb commandline debugger prints the line it is currently on after every step and next command. Consider the following gdb session where I step through some code:
...
Temporary breakpoint 1, main (argc=1, argv=0x7fffffffd848)
at src/main.cc:3
3 int main(int argc, char **argv){
(gdb) next
4 Printf("Hello World\n"); // <--- disable this
(gdb)
5 printf("Hello World 2\n"); // <--- disable this
(gdb)
Is there a gdb setting to disable this printing? I know this is technically possible because the gdb TUI has exactly the behaviour i'm looking for (accessible through gdb command set enable tui).
Thanks!
I achieved it through redirection:
define n
set logging file /dev/null
set logging redirect on
set logging on
next
set logging off
display
end
I found that capturing the output of next did not work using gdb.execute (gdb's python API). I expect that this is the case because the source line is not printed by next itself, but by the stop event that is triggered.
There is no straightforward way to do this when using the gdb CLI. The code that handles printing the "stop" to the user does not check anything that the user can set.
One way you could try solving this would be to alias n to a command that runs the command using a different interpreter, like interpreter-exec tui next. I am not sure if this will actually work.
Another way to accomplish this would be to write a Python command named n that uses gdb.execute to invoke next -- while capturing the output and ignoring it. This approach is somewhat dangerous because sometimes you probably do want some of the stop message, just not the source display.
The best approach would be to modify gdb to add a new set command to disable the source printing. This is easy to do.
Related
GDB allows registering a set of commands to a specific breakpoint via commands NUM syntax. I need to register the set of commands for a specific breakpoint via an external file, by using a syntax something like the following:
commands ./main.c:18
silent
print buffer[0]
cont
end
commands ./io.c:29
silent
printf "Hello world %i\n", myvar1
cont
end
The commands path/to/file:XX syntax is made up by me. Because the NUM in commands NUM syntax requires exactly the breakpoint's runtime ID number (assigned by GDB), I can not use a deterministic syntax for that purpose.
I'm currently registering breakpoints via a text file with such a content:
break ./main.c:18
break ./io.c:29
and then issuing source breakpoints.txt command inside GDB. It seems that there is no way to register commands at the same time while registering a breakpoint:
(gdb) help break
Set breakpoint at specified line or function.
break [PROBE_MODIFIER] [LOCATION] [thread THREADNUM] [if CONDITION]
PROBE_MODIFIER shall be present if the command is to be placed in a
probe point. Accepted values are -probe' (for a generic, automatically guessed probe type), -probe-stap' (for a SystemTap probe) or
`-probe-dtrace' (for a DTrace probe).
LOCATION may be a line number, function name, or "*" and an address.
If a line number is specified, break at start of code for that line.
If a function is specified, break at start of code for that function.
If an address is specified, break at that exact address.
With no LOCATION, uses current execution address of the selected
stack frame. This is useful for breaking on return to a stack frame.
THREADNUM is the number from "info threads".
CONDITION is a boolean expression.
Multiple breakpoints at one place are permitted, and useful if their
conditions are different.
Question
Is there any easy way to set some predetermined commands for a predetermined breakpoint from within a file?
If not, is there any equivalent way to pass the (gdb) info breakpoints output to a file or a program while pipe is not available in GDB (version 5.3)? Currently I'm trying a workaround by using logging feature for that purpose:
set logging file /tmp/breakpoints
set logging on
info breakpoints
set logging off
Is there any easy way to set some predetermined commands for a predetermined breakpoint from within a file?
Yes: if you use commands without NUM, the commands will apply to the last breakpoint set. So you want something like:
break main.c:18
commands
silent
print buffer[0]
cont
end
I need to debug a flow using gdb - I do not know the call stack hence cannot set break points and going thru first entry points will be really very tedious in project code that runs thru thousands of line.
In same regards is there a way that when I start the program execution via gdb we enable some commands (after some initial breakpoint) - hence when the program starts processing further on it print file name line number without user interaction - something like code flow itself?
Well I want to list lines of code when executing via GDB - like we do
when breakpoint is set and we run 'step'.
You can run step in infinite loop like this:
(gdb) start
Temporary breakpoint 2, main () at ttt123.cpp:23
23 vector<A> v1;
(gdb) while 1
>step
>end
I have read the following SO question:
Do specific action when certain breakpoint hits in gdb
Here, we use 'command' to decide what to do when the SPECIFIED Breakboint Gets Hit.
My Question is:
Suppose I put Breakpoints on ALL the Functions matching a given pattern:
gdb$rbreak func_
=> 100 Breakpoints (say)
When I execute this Code, I want to do the SAME Action - on hitting Each of these functions.
Hence, I cannot define something like:
command break_point_number
// since I don't know how many breakpoints will be there
Can somebody please suggest me:
How can I do a specific action-set when ANY Breakpoint gets Hit in GDB?
Thanks.
With a new enough version of gdb you can use a range:
(gdb) rbreak whatever
... gdb creates breakpoints N, N+1, ..., M
(gdb) commands N-M
> stuff
> end
I forget exactly when this feature went in.
With an older version of gdb, I'm not sure it can easily be done.
It can be done with difficulty: use set logging to write output to a file, then "info break", then "shell" to run scripts to edit the file into gdb commands, then "source". This is very painful.
The problem I am trying to solve is that I want to dynamically compute the length of an instruction given its address (from within GDB) and set that length as the value of a variable. The challenge is that I don't want any extraneous output printed to the console (e.g. disassembled instructions, etc.).
My normal approach to this is to do x/2i ADDR, then subtract the two addresses. I would like to achieve the same thing automatically; however, I don't want anything printed to the console. If I could disable console output then I would be able to do this by doing x/2i ADDR, followed by $_ - ADDR.
I have not found a way to disable the output of a command in GDB. If you know such a way then please tell me! However, I have discovered interpreter-exec and GDB/MI. A quick test shows that doing x/2i works on GDB/MI, and the value of $_ computed by the MI interpreter is shared with the console interpreter. Unfortunately, this approach also spits out a lot of output.
Does anyone know a way to either calculate the length of an instruction without displaying anything, or how to disable the output of interpreter-exec, thus allowing me to achieve my goal? Thank you.
I'll give an arguably cleaner and more extensible solution that's not really shorter. It implements $instn_length() as a new GDB convenience function.
Save this to instn-length.py
import gdb
def instn_length(addr_expr):
t = gdb.execute('x/2i ' + addr_expr, to_string=True)
return long(gdb.parse_and_eval('$_')) - long(gdb.parse_and_eval(addr_expr))
class InstnLength(gdb.Function):
def __init__(self):
super(InstnLength, self).__init__('instn_length')
def invoke(self, addr):
return instn_length(str(long(addr)))
InstnLength()
Then run
$ gdb -q -x instn-length.py /bin/true
Reading symbols from /usr/bin/true...Reading symbols from /usr/lib/debug/usr/bin/true.debug...done.
done.
(gdb) start
Temporary breakpoint 1 at 0x4014c0: file true.c, line 59.
Starting program: /usr/bin/true
Temporary breakpoint 1, main (argc=1, argv=0x7fffffffde28) at true.c:59
59 if (argc == 2)
(gdb) p $instn_length($pc)
$1 = 3
(gdb) disassemble /r $pc, $pc + 4
Dump of assembler code from 0x4014c0 to 0x4014c4:
An alternative implementation of instn_length() is to use the gdb.Architecture.disassemble() method in GDB 7.6+:
def instn_length(addr_expr):
addr = long(gdb.parse_and_eval(addr_expr))
arch = gdb.selected_frame().architecture()
return arch.disassemble(addr)[0]['length']
I have found a suitable solution; however, shorter solutions would be preferred. This solution sets a logging file to /dev/null, sets to to be overridden if it exists, and then redirects the console output to the log file temporarily.
define get-in-length
set logging file /dev/null
set logging overwrite on
set logging redirect on
set logging on
x/2i $arg0
set logging off
set logging redirect off
set logging overwrite off
set $_in_length = ((unsigned long) $_) - ((unsigned long) $arg0)
end
This solution was heavily inspired by another question's answer: How to get my program name in GDB when writting a "define" script?.
It seems that input redirection in gdb does not work in Cygwin e.g
(gdb) run < input.txt
Is there other way to redirect input in gdb of Cygwin??
Unfortunately this is not possible when running gdb in cygwin. The bug exists for a quote long time, but apparently it's a hard one to fix - and probably the gdb devs prefer spending time on features/issues relevant to more common environments (such as Linux).
There are various possible workarounds; I'd prefer the first one since it's the cleanest and also useful while not debugging / running on cygwin:
Add a command line argument, e.g. -f whatever with whatever being the filename to read from. If the argument is not present or set to -, read from stdin. The -f - option is optional of course but for arguments accepting filenames it's a common standard (as long as it makes sense) to handle - as "use stdin/out".
Use the gdb hack mentioned here to remap stdin to a manually opened file inside the application:
> gdb yourexecutable
(gdb) break main
(gdb) run
(gdb) call dup2(open("input.txt", 0), 0)
(gdb) continue
This sets a breakpoint on the main function, then executes the program which will break right after entering main. Then dup2 is used to replace the stdin fd (0) with a file descriptor of the input file.