I have setup a GoCD server and agent (on a Windows machine if that matters). I am using it to build a .NET application. I have installed a few Task plugins (Powershell, Xunit-converter) and when I restart the server I see those as loaded and installed without issue in the plugin admin screen.
However, when I go to create or edit a job, I do not see these new tasks in the "Add Task" dropdown. I can get around the powershell one by using a Custom command, but I need to be able to convert my MsTest ouptut to Xunit so that it can display the results in the Test Results Tab.
Related
I can't debug my react native / expo app in WebStorm, but I can in Visual Studio Code.
I have a react native app that I can successfully run using expo. I set up the configuration according to the info on this site:
https://blog.jetbrains.com/webstorm/2018/02/webstorm-2018-1-eap-181-3263/#debugging-expo
When I click "run" or "debug" and "Debug JS Remotely" is turned off, the bundler builds a JS bundle and the app starts on my devices.
But once I turn on "Debug JS Remotely", the bundler only says:
Starting custom debugger by executing: : [my working directory] [my working directory again]
and never goes on to build the JS bundle.
After a short while, a red screen appears on the device, and it says:
Unable to connect with remote debugger
Timeout while connecting to remote debugger
onFailure
DevSupportManagerImpl.java:851
onFailure
WebsocketJavaScriptExecutor.java:83
run
WebsocketJavaScriptExecutor.java:142
handleCallback
Handler.java:790
dispatchMessage
Handler.java:99
...
The bundler doesn't say anything more than the message above.
As soon as I turn off remote debugging, the the bundler starts building again and finishes with
"Building JavaScript bundle: finished in ...ms"
as usual, but the device, again, shows the red screen with aforementioned messages, or doesn't show anything but the regular white screen with a message at the bottom saying "Downlading JavaScript bundle 100,00%". I either have to stop and restart within WebStorm or I have to close the expo app and re-open it. Either way will make the app start again on my device.
This is my first time working with javascript, react native, expo, so I am not sure, but it should be possible to debug in WebStorm directly, right? As mentioned, in Visual Studio Code everything including debugging works fine, so I don't think it's anything in the code. Maybe someone here has an idea where the problem lies?
node -v: v11.6.0
react-native -v: react-native-cli: 2.0.1, react-native: 0.57.1
Any help will be greatly appreciated! Thanks in advance!
PROOF
HOWTO
Looks like there's been an update to how you can setup Configurations since you tried.
Try changing the Bundler host to 127.0.0.1 and try again.
I just setup Webstorm v2020.2 yesterday to debug my Expo application and it is working as expected.
These instructions were all that I required: https://www.jetbrains.com/help/webstorm/react-native.html#ws_react_native_create_run_config
On the main menu, go to Run | Edit Configurations, click icons.general.add.svg and select React Native from the list. The Run/Debug Configuration: React Native opens.
Choose whether you want WebStorm to build and launch the application for you:
Select the Build and launch checkbox if you are launching your application for the first time or if you have updated its native code since the last run.
If your application uses Expo, clear the checkbox because this bundler takes care of the process itself.
If you selected the Build and launch checkbox, choose the target platform, Android or iOS. Depending on your choice, WebStorm will run the bundler with react-native run-ios or with react-native run-android.
Optionally, type the arguments to be passed to React Native, for example, specify the simulator type through the ‑‑simulator flag: ‑‑simulator="iPhone 4s".
In the Bundler host field, specify the host where the React Native bundler runs, the default value is localhost.
If you are using Expo, change the default bundler host to ensure successful connection with the debugger. This connection may fail because WebStorm by default uses localhost to start debugging while Expo expects 127.0.0.1 or an external IP address depending on what is selected in Connection field of the Metro bundler configuration. See Debugging a React Native application that uses Expo for details.
In the Bundler port field, specify the port on which the React Native bundler runs, by default 8081 is chosen, learn more from the React Native official website.
Choose the Node.js interpreter to use. This can be a local Node.js interpreter or a Node.js on Windows Subsystem for Linux.
Specify the path to react-native-cli and the working directory of the application. Optionally, type the environment variables for react-native run-android or react-native run-ios.
By default, WebStorm starts the React Native bundler automatically when you invoke the run/debug configuration. If you have already started the bundler from outside WebStorm, for example, from the command line, you can re-use it without stopping and restarting. Select your bundler in the Before Launch area and click Remove.
The issue is tracked at WEB-35719, please follow it for updates
I've got a VSTS build that is trying to deploy a test agent so I can run some Selenium tests and when I get to the "Deploy TestAgent on" build step, I am getting the following error:
2017-06-22T14:29:05.6157972Z ##[warning]Task 'DownloadTestAgent' for
machine vmtest43xxx.cloudapp.net:5986's Error : System.Exception: The
process cannot access the file 'C:\TestAgent\vstf_testagent.exe'
because it is being used by another process.
Also, if setting up a local build agent is a good workaround for this, I'm all ears, but so far I have had a lot of trouble trying to set up a local test agent. This seems weird since setting up a local build agent was relatively easy up to this point. Any suggestions on how I should set up a local agent? I've been trying to follow instructions from here and here.
Thanks!
It’s easy to setup a local build agent, so try to setup a build agent:
Steps for windows:
Go to Admin page of Agent Pools (https://[account].visualstudio.com/_admin/_AgentPool)
Click Download agent button
Unzip the downloaded file
Run Command Line as Administrator
Run config.cmd
Specify collection url (https://[account].visualstudio.com), Personal Access Token etc
More information, you can refer to: Deploy an agent on Windows.
You can specify Test Agent Location (can be access from build agent machine) for Visual Studio Test Agent Deployment task to save time.
Is there any way to run external program or command after I open project in WebStorm?
I've created new external tool which runs database server, and after I click on it in menu, it runs the server and everything works, but I'd like to start this tool automatically on project start. And it'd be awesome if it could also open web browser to certain url which would be database admin tool.
If you can launch your desired task using Grunt/Gulp/npm task or any other Run/Debug Configuration then yes -- there is Startup Tasks functionality available at Settings/Preferences | Tools | Startup Tasks.
Note that you cannot execute External Tools entry directly or launch any DOS/shell command this way.
The easiest way of using this would be creating Grunt/Gulp task that would do your actual job. There you can use exec() method to execute custom command.
I am new at mobile automation testing and now i want to create a one type of framework for android application testing that in before method it will check for if emualtor is ruuning or not? if not then launch the emulator and second specific application is installed or not(example: facebook) if facebook is installed then launch that application.
I am using appium for testing. Can any one suggest me what shuold i have to do?
Thank you in advanced.
First of all appium cannot automate pre-installed apps from play stores. You should have a ".apk" file to install it.
Secondly, appium cannot automate bringing up of emulator, however a way to do it is through the use of script of adb commands.Check through the adb command if any device is active
adb devices
If it is not then you can start your emulator using the emulator commands of adb.
For complete adb commands reference.
http://developer.android.com/tools/help/adb.html.
Lastly you can use different modes of appium like "--full-reset" for re-installing the app even if it is pre-installed or simple "appium" will start the ".apk" which was once installed by it.
Check all the modes here - "github.com/appium/appium/blob/master/docs/server-args.md"
For other basic queries, visit - https://github.com/appium/training
I have a project named as test using spring,hibernate and struts.It is running when am using eclipse.But when i export this project as war and execute it using jetty runner in command prompt it just extracted the project and listed the contents in the browser.But i want the project to be executed.I have tried with some other simple web application war using the same procedure and it works fine.But in my project its not working with jetty.
here is my code for jetty
D:\>java -jar jetty-runner-7.0.0.v20091005.jar test.war
i just listing some console output of jetty
INFO::RUNNER
NO tx manager found
deploying file:D:/test.war #/[webAppContext#86f241#86f241/,null,file:D:/test.war
can any one tell me a solution for my problem
1) use a newer version of runner, 7.6.3.v20120416
2) what context are you trying to navigate to, you might want to experiment with some of the other cli options on the runner to set the context and whatnot from the command line and experiment with that. This site has some good information on using this artifact as well.