I just started coding and I have coded a whole simple website now. I used notepad++ and when i ran it in firefox it all work perfectly, after all I came to the hosting part the <a href> doesn't work on all the tabs I created (only some of the 2/5 are working). I used filezilla to upload the HTML files to the hostsite.
My question is, why does the href doesn't work on the uploaded domain but I does work when I just run it? I don't think the issue is on the coding, since it is fine when i open the HTML file in my browser (I am using "Hostinger.dk").
Related
I hope someone can help out with this one. I have been using djangocms to build a simple frontend centric website for a client so they can maintain their own content. There is nothing fancy in this setup. Just a few template.html files, a little css and djangocms to pull it all together. There are no other forms, models, views or anything at this stage. Just pure djangocms.
Originally I was working with django 1.8.6 and the image picker seemed to work fine. I could upload my files and next to each one there is a selector icon which works and all was great. See below image. This was using cmsplugin-filer.
Then I tried to upgrade the website to Django version 1.11.13 and I started to run into this problem. The file select that you see above is no longer available to the user. I have spent days working on this and in my travels I found that apparently cmsplugin-filer is now deprecated. So I removed it and switched to the recommended djangocms-filer install thinking that might solve my problem...but no. After many many hours of head scratching I figured it must be something in my project throwing things out, so I have done a 100% clean install using the prescribed djangocms-installer. Other than connecting it to a postgresql database, it is a completely vanilla installation, and yet it still does not work. All I get is the image below. A simple tick box but no way of selecting the image nor anyway of saving what I have selected. Uploading files is fine and I can create folders and images upload into them perfectly fine.
Below is a snapshot of my pip freeze showing everything installed in my virtualenv and the associated versions.
My settings file is almost 100% standard so I don't understand why I can't get this to work. Note: If, when I am adding the plugin to my template, I don't select the Choose File Button but simply drag an image into the grey rectangle, it all works fine. My file gets uploaded into the unsorted uploads folder and the image is selected into my template all in one go, but using the choose file route, where I have more control over my files and how they are stored, doesn't.
Does anyone have any idea what I might be missing please?
UPDATE:
Django CMS overrides some static files and there are some old ones in your browser cache. You need to clear your caches or open the page using incognito window.
First of all, thank you for everything that you do. Without this community, I would hate web design and be reliant on my teacher's outdated, static methods. Much love <3
So, this is a tricky one (maybe).
I want to have, essentially, an iframe on a webpage that contains a website I coded previously. It was a project for school that never went live, but I'd like to include it as part of my portfolio. Problem is, an iframe needs a URL for a source, but I just have the folder with more folders full of code, fonts, and images. How can I tell the browser to populate this box with everything from "name" folder? And then how will it know to run the code instead of just showing a file tree or something?
In the end, I want a page describing a previous web project and let the client experience that project within the one page. And I don't want to get a domain for every project I do.
Maybe there's an easier way I'm not thinking of?
To make it interesting, my new portfolio site is being made in Squarespace...maybe. I bought a domain from them because I had a promo code and wanted to try the platform, but I kind of hate it. I can't change any of the code and it won't maintain a connection to Typekit. So all I can do is change the basic appearance of preexisting elements. It's like WordPress all over again....LAME! Sadly, I already bought the domain.
Can Squarespace just be a host? Is there a way to download the raw code of these templates, edit it, and upload it again?
Thanks for all your help!
I want to have, essentially, an iframe on a webpage that contains a
website I coded previously.
Squarespace's file upload mechanism is very limited. Without using the Developers Platform, there is no effective way to upload many files at once. Furthermore, there is no way to create folders. Therefore, even if you were willing to upload each .html file and each asset one-by-one, there'd be no way to organize the files into folders (assuming that the "tree" you mentioned includes additional sub-folders).
Initially, in order to get the files to be accessible by Squarespace, you'd have to do one of the following:
Use Squarespace Developers Platform (A.K.A. "Developer Mode") and upload your to-be-iframed
(TBI) website files to the "assets" folder using SFTP or Git.
Host your TBI website files somewhere else (a different host
environment, for example) which will maintain your file/folder
structure.
How can I tell the browser to populate this box with everything from
"name" folder? And then how will it know to run the code instead of
just showing a file tree or something?
Assuming that the TBI website has an index.html file or home.html file or similar, and assuming you were to use the Squarespace Developer Platform, you'd insert the iframe either in a Code Block or within a template/.region file directly using something like
<iframe src="/assets/tbiwebsitefolder/index.html"></iframe>
while setting your other iframe attributes (such as height and width) as needed.
Is there a way to download the raw code of these templates, edit it,
and upload it again?
Yes. You select a template and then enable Developer Mode on that template. From there, you use SFTP or Git to download the template files, edit, and reupload.
You may benefit by reviewing some considerations of enabling Developer Mode on a Squarespace Template.
One other idea, to avoid the iframe and Developer Mode entirely, would be to capture images of the TBI website rendered in a browser, and then simply add those images to a gallery block or gallery page. This could allow you to convey the general idea of the project but would of course not capture the full "experience" of it.
I have a Github pages website for our team at http://olinaeromarketing.github.io/. I've tried opening index.html locally and it works perfectly in chrome on my pc. Everything loads perfect. However, when I push everything to Github and try to open it with http://olinaeromarketing.github.io/, everything except index.html gives a 404 error and can't load. I'm pretty stumped as to why this is happening. I also haven't been able to find anything on the web regarding this issue.
The repository is located at https://github.com/OlinAeroMarketing/OlinAeroMarketing.github.io. BTW, the website is currently a WIP and not yet finished.
By default, Jekyll is used to process GitHub Pages. Files/directories that begin with an underscore have special meaning for Jekyll and are, therefore, treated differently.
Since you don't seem to be using Jekyll, your simplest solution is to add a file named '.nojekyll' to the root path to disable Jekyll functionality.
Check out https://help.github.com/articles/files-that-start-with-an-underscore-are-missing/ for more info.
Edit: Just to be clear, the offending directory is '_include'.
Can anyone help with this strange problem.
I have just installed CF10 developer on Win7 which is using IIS7.5.
Installation went smooth, and can browse .cfm files no problem and connect to datasources no problem .. BUT: even though I can browse all my local cf sites, none of the sites will display images or styles for external .CSS files.
So, I get the site, content from the database, and all the functionality of cfm files being parsed OK, but no styles and no images.
If I browse directly (pasting the filepath in the browser) to one of the images I get a 404 error - file not found - even though the .gif file does indeed exist in the directory.
So, basically, I can run CFM files, and browse a local site built in coldfusion, but none of the images or externally referenced css files will be "found" by the browser/IIS.
Can anyone help?
Thanks in advance if someone can..
Sounds like an issue with those mimetypes, please see the following for information on installing the static content role to IIS and enabling those mimetypes to be served.
No Mime Types Option in IIS 7
Be sure to enable static content in IIS 7.
Had two occurrences of this problem lately.
See here:
http://weblogs.asp.net/anasghanem/archive/2008/05/23/don-t-forget-to-check-quot-static-content-service-quot-in-iis7-installation.aspx
Try restarting the IIS server. Close all browsers and restart.
You need to determine if it is a CF issue or an IIS issue. Try the following:
Check to see if this is an issue with images not being served vs broken paths to the images. There may be CFML code that is creating links to invalid locations.
If the locations are valid then it would be an issue with IIS not server image files.
Also check to see if there is a similar issue with JPEG and PNG files. If JPEGs and PNGs show up, this suggests an IIS issue.
Also try creating a simple HTML page that has an image on it. If it has an image on it, this suggests a CF issue
A question like this was asked before and the person got nothing but criticisms, hope this won't be the case here.
I have a website that allows a business to add their menu to my site, and some have requested to be able to import a menu (a pdf or jpg) that is already online elsewhere. So I made a form that saves a url to the db and then that url is used in the src of an iframe on my site.
I tested it all and it worked fine on my local machine (using Django development server). When I synced it over to my production server and saved the same url I was testing with, the iframe loads no content.
I imagine that it has something to do with trying to read an individual file from another server because it works if I make the url google.com or to an image that is under my domain name. Is there anything I can do to fix this? Storing a url instead of a pdf in my db is much more efficient so doing this way is preferred over uploading their menu to my site.
I don't think this question needs any code attached, but if you want to see some let me hear it.
Thanks
The menu you're testing with probably has the X-Frame-Options response header set.
Is there a reason you're putting the image/pdf as the src on an iframe instead of just using the img tag (or putting an img tag inside your iframe)? There's still no guarantee that will work for all pages, as some sites will refuse to serve media to an external page, but I suspect this is your problem in this case.