I installed php7.0.15/apache2.4.25/phpMyAdmin 4.6.5.2 via xampp, but it turns out that the extensions xsl and intl are missing (need them to run Magento2).
I'm using Windows 8.1.
Both files php_xsl.dll and php_intl.dll exist in xampp/php/ext and I tried deleting the related ";" from extension=.. from in php.ini,
re-saving the php.ini and restarting apache server;
also copied in apache/bin folder the icu*.dll files from php;
BUT no success with that: still missing with magento2 Readiness Check.
Have any advise?
I have two suggestions for you---
No.1
Are you restarting the apache as administrator as I forget to do that most of the time.
No.2
Check your environment variable path. Did you set it properly.
Hope this can help!
Related
I just update my google cloud SDK on windows 10 (gcloud components update).
After the update the gcloud command stop working.
All I get is (for example : gcloud -h):
PATH\lib\gcloud.py" -h" was unexpected at this time.
I try to re-install but it didn't help:(
As noted in the other answers, this is a bug with the 274.0.0 version of gcloud. Another report of this issue actually identifies where the bug is and offers this fix:
If you are stuck and need an immediate solution, here's a workaround that will move you forward, but you should reinstall the Cloud SDK from scratch when a fix is ready.
Open C:\Program Files (x86)\Google\Cloud SDK\google-cloud-sdk-bin\gcloud.cmd in your editor
Near line 170, change ) ELSE ( to be just )
Remove the ) on the last line in the file.
That should get you working in the short term (albeit with an extraneous error message every time you run a command). After getting it working you can revert to version 273.0.0 (so that you stop getting the error message and aren't using a modified version) using:
gcloud components update --version=273.0.0
This is being tracked in the public bug https://issuetracker.google.com/issues/146458519
We have a patch for two files that are causing these problems. These apply in two cases (both on Windows):
1. A new install fails, or
2. You are unable to run gcloud after performing a components update.
For case # 1, please download the attached file install.bat, and copy it to the location where you have attempted to install gcloud, e.g. C:\Program Files (x86)\Google\Cloud SDK\google-cloud-sdk. Then run it, e.g.
cd C:\Program Files (x86)\Google\Cloud SDK\google-cloud-sdk
.\install.bat
For both cases #1 and #2, download the attached file gcloud.cmd, and copy it to the bin directory under your gcloud installation, e.g.
C:\Program Files (x86)\Google\Cloud SDK\google-cloud-sdk\bin. When prompted to replace the previous copy, type Yes. This should allow you to run gcloud without being prompted to set CLOUDSDK_PYTHON.
The files are attached in the public bug tracker.
This is a known issue that is being tracked here
After hours of trying to fix it! I found how :)
uninstall google SDK
https://dl.google.com/dl/cloudsdk/channels/rapid/google-cloud-sdk.zip
https://cloud.google.com/sdk/docs/downloads-interactive#interactive_installation
This fix the bug.
After that I had new bug in pyCharm GAE:
ImportError: No module named _subprocess
I fix this with the solution here:
Error importing built-in module "_subprocess" using Google Cloud Platform's Local Development Server
Hope this helps and saves a lot of trouble for you guys :)
I solved this problem. I got the same error message.
My Env: gcloud v274.0.0, Windows 7
First, I re-installed Google SDK, and changed my path to \Google\CloudSDK\.
Second, I got this message
"\Google\CloudSDK\google-cloud-sdk\bin..\lib\gcloud.py" init" was unexpected at this time."
So I tried to use cd command to specific directory where gcloud.py is exist.
Finally, I found the path: \Google\CloudSDK\google-cloud-sdk\lib, and it works.
Hope it can help you, too.
The problem, or rather bug within the installer, is that you are using a directory that contains spaces within it. At some point of the script the space causes the command to be split up incorrectly, causing the error.
I had the same message and fixed it by re-installing the Google Cloud SDK in a directory without spaces (c:\Google\CloudSDK)
This is really REALLY damn frustrating. For some reason Bitnami WAMP Stack keeps on FAILING to install in a deeper directory D:\***\***\***\***\***\wampstack. It ONLY works when I'm installing in the root (one folder in D:\Bitnami\wampstack). My set up NEEDS to have the stack server installed deeper down for organization's sake, but it won't work. It keeps failing.
I then tried installing it in the root directory, then tried moving the whole folder (since IT IS supposed to be self-contained.) into the proper directory (deeper down), and then changing the ImagePath of the wampserverApache and wampserverMySQL to reflect that of the new location. IT STILL WON'T START.
I keep getting this error:
> Starting all servers... Starting MySQL Database... Exit code: 1
> Stdout:
>
> Stderr: Unknown error starting mysql Starting Apache Web Server...
> Exit code: 1 Stdout:
>
> Stderr: Unknown error starting apache
Any idea on how to fix this? Or am I just doing something extremely wrong. Please help. My OCD is killing me spent a good 3 hours on this stupid issue. I just don't understand why the installer won't let me just install in a deeper directory. It lets me change the directory during installation but it doesn't ever work. Bitnami really should fix this if they're letting you change the directory in which to install, or at least limit the choices so that the user doesn't get stuck needlessly trying to figure out the problem with the installation.
Bitnami developer here.
The problem you're facing must be related to the length of your path. This is a NTFS limitation, this is a related case:
Maximum filename length in NTFS (Windows XP and Windows Vista)?
Could you check if your path is longer than 255 characters?
Also spaces in directory names can be an issue, as all this software is ported from unix where spaces in directory names require the use of quotes around paths that contain spaces. So either check the config and put quotes around your paths that contain spaces like "folder 1/folder 2" or remove/replace the spaces in the paths.
I manually copied WPT folder from a file server onto my Windows10 test machine and ran below XBootmgr command:
"Xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -numRuns 1 -resultPath d:\tempetl"
Note: copied WPT folder at location "C:\WPT" and I have manually created "D:\tempetl"
But it is not running and giving small error pop-up which doesn't contain any error message. Getting same issue on another Windows8.1 machine.
I thought there is some issue with the switches I have used, so I tried simple command:
"Xbootmgr -trace shutdown -noPrepReboot"
But faced same issue.
Can anybody help me to resolve this issue?
Thanks in Advance!
Manually copy-pasting the WPT folder won't work. You need to install WPT using an MSI file (WPTx64-x86_en-us.msi).
On a Windows PC which has WPT installed on it, you can find this file in
C:\Program Files (x86)\Windows Kits\8.1\Windows Performance
Toolkit\Redistributables
You can also install WPT as part of Windows Assessment and Deployment Kit (ADK) from https://www.microsoft.com/en-US/download/details.aspx?id=39982
Also, once you install WPT, you need to restart the computer once before you can start using the WPT commands for xbootmgr and xperf from an elevated command line window.
I did my first development in a Win7 machine, then switched to a Mac when I got that, which was great due to the speed of building with ember server running. I've been keeping everything in a Git repo. Everything works fine running ember server from my Mac.
Now, when I do a fresh clone from the repo on my Win7 computer, then do npm install and bower install (both of which complete fine), when I run ember server next, I get a bunch of errors saying ENOTEMPTY, directory not empty (path, blah blah blah).
It's complaining about some folder in the tmp directory, which the server command is creating and putting stuff into all by itself, so I don't know what it's complaining about.
I've been finagling with this about 5 different times now, but without success.
Ember CLI version is 0.1.1
Ember version is 1.6
Here's an example of one of the errors, but they're all similar (and similarly unhelpful):
ENOTEMPTY, directory not empty 'c:\Dev\star\tmp\remover-tmp_dest_dir-sRc08q1q.tm
p\templates'
Error: ENOTEMPTY, directory not empty 'c:\Dev\star\tmp\remover-tmp_dest_dir-sRc0
8q1q.tmp\templates'
at Object.fs.rmdirSync (fs.js:623:18)
at rmkidsSync (c:\Dev\star\node_modules\ember-cli\node_modules\rimraf\rimraf
.js:247:11)
at rmdirSync (c:\Dev\star\node_modules\ember-cli\node_modules\rimraf\rimraf.
js:237:7)
at fixWinEPERMSync (c:\Dev\star\node_modules\ember-cli\node_modules\rimraf\r
imraf.js:150:5)
at Function.rimrafSync [as sync] (c:\Dev\star\node_modules\ember-cli\node_mo
dules\rimraf\rimraf.js:216:26)
at Remover._remove (c:\Dev\star\node_modules\ember-cli\node_modules\broccoli
-file-remover\index.js:46:10)
at c:\Dev\star\node_modules\ember-cli\node_modules\broccoli-file-remover\ind
ex.js:60:14
at Array.forEach (native)
at c:\Dev\star\node_modules\ember-cli\node_modules\broccoli-file-remover\ind
ex.js:59:12
at $$$internal$$tryCatch (c:\Dev\star\node_modules\ember-cli\node_modules\rs
vp\dist\rsvp.js:470:16)
file added bootstrap.min.js
file added favicon.ico
file added sb-admin-2.js
Okay, I managed to do something that worked. I had forgotten I needed to disable Windows Indexing on my tmp folder at least (I did it for the whole cloned project):
Windows Key, type "Indexing Options"
Click the drive, then Modify
Uncheck places you don't want indexed (like the tmp folder)
If you use Sublime, go to Perferences --> Settings - User and add the following:
"folder_exclude_patterns":
[
"tmp/*",
],
Finally, I just had to keep doing ember server, stopping it, and doing it again until it build successfully (took around 5 tries).
path : C:\Ruby193\bin;C:\Program Files\Kerio\Outlook Connector (Offline Edition)\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Java\jdk1.7.0\bin;%ANT_HOME%\bin;D:\Automation\android-sdk;D:\Automation\android-sdk\tools;D:\Automation\android-sdk\platform-tools
ANDROID_HOME : D:\Automation\android-sdk
JAVA_HOME : C:\Program Files\Java\jdk1.7.0
C:\Users\nanda.kumar\Desktop\bbb>calabash-android console D:\Automation Tools\Calabash_Requirements\7.1.2com.
tesco.grocery.view-Aligned.apk
After the above step,I am getting the following error
Could not find an Android SDK please make sure it is installed.
You can read about how Calabash-Android is searching for an Android SDK and how you can help here:
https://github.com/calabash/calabash-android/blob/master/documentation/installation.md#prerequisites
Android SDK is installed and it is working fine with Robotium. I don't know what is wrong here. can anyone help me with this ?
According to the following
https://github.com/calabash/calabash-android/blob/master/ruby-gem/lib/calabash-android/env.rb
def self.path_if_android_home(path)
path if path && File.exists?(File.join(path, 'platform-tools', adb_executable))
end
$ANDROID_HOME/platform-tools/adb must exist
It seems that in the new ANDROID SDK, it’s in the bin folder, so i just created a symlink “platform-tools” to the “bin” directory.
Hope this helps
Samir
Can you please set your android home on path as
%ANDROID_HOME%/platform-tools;%ANDROID_HOME%/tools the same applies with JAVA_HOME as well.So your path should look something like this
path : C:\Ruby193\bin;C:\Program Files\Kerio\Outlook Connector (Offline Edition)\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Java\jdk1.7.0\bin;%JAVA_HOME\bin;%ANT_HOME%\bin;%ANDROID_HOME%\platform-tools;%ANDROID_HOME%\tools;
Try this and see. Running adb should you the commands of android?
Regards,
Sai
I would suggest including the path of android tools in the environment variables in the drive where OS is installed(C drive) and reboot the machine. Let me know if this helps
ANDROID_TOOLS=C:\Automation\android-sdk\tools\
ANDROID_PLATFORM_TOOLS=C:\Automation\android-sdk\platform-tools\