As the title says, I'm trying to build up a regular expression that can recognize strings with this format:
word!!cat!!DOG!! ... Phone!!home!!
where !! is used as a delimiter. Each word must have a length between 1 and 5 characters. Empty words are not allowed, i.e. no strings like !!,!!!! etc.
A word can only contain alphabetical characters between a and z (case insensitive). After each word I expect to find the special delimiter !!.
I came up with the solution below but since I need to add other controls (e.g. words can contain spaces) I would like to know if I'm on the right way.
(([a-zA-Z]{1,5})([!]{2}))+
Also note that empty strings are not allowed, hence the use of +
Help and advices are very welcome since I just started learning how to build regular expressions. I run some tests using http://regexr.com/ and it seems to be okay but I want to be sure. Thank you!
Examples that shouldn't match:
a!!b!!aaaaaa!!
a123!!b!!c!!
aAaa!!bbb
aAaa!!bbb!
Splitting the string and using the values between the !!
It depends on what you want to do with the regular expression. If you want to match the values between the !!, here are two ways:
Matching with groups
([^!]+)!!
[^!]+ requires at least 1 character other than !
!! instead of [!]{2} because it is the same but much more readable
Matching with lookahead
If you only want to match the actual word (and not the two !), you can do this by using a positive lookahead:
[^!]+(?=!!)
(?=) is a positive lookahead. It requires everything inside, i.e. here !!, to be directly after the previous match. It however won't be in the resulting match.
Here is a live example.
Validating the string
If you however want to check the validity of the whole string, then you need something like this:
^([^!]+!!)+$
^ start of the string
$ end of the string
It requires the whole string to contain only ([^!]+!!) one or more than one times.
If [^!] does not fit your requirements, you can of course replace it with [a-zA-Z] or similar.
Related
I'm trying to write a regular expression that captures desired strings between strings
("f38 ","f38 ","f1 ", "..") and ("\par","\hich","{","}","","..") from a decompiled DOC file and append each match to an array to eventually be printed out into a new file.
I'm having an issue with catching certain strings between "f38 " and "\hich" (usually when the string spans multiple lines but there is at least 1 exception to this I've found in the example string snippet of the DOC file I'm using on regex101.com)
Here is the regular expression as I have it now
(?<=f38 |f38 | |f1 |\.\.)\w.+(?=\\par|\\cell |\\hich|{|}|\\|\.\.)
The troublesome matches come out including "\hich". Like "e\hich" and "d\hich" and I want to match "e" and "d" respectively in these examples not the \hich portion. I'm thinking the problem is with handling the newline/line-breaks somehow.
Here is a smaller snippet of the input string, I have bolded what is matched and bolded + capitalized the problematic match. From this I want the "e" not the \hich. Note that above there are 2 examples of things going right and "\hich" is not included in the match.
l\hich\af38\dbch\af31505\loch\f38 ..ikely to involve asbestos exposure: removal, encapsulation, alteration, repair, maintenance, insulation, spill/emergency clean-up, transportation, disposal and storage of ACM. The general industry standards cover all other operations where exposure to asb..\hich\af38\dbch\af31505\loch\f38 E\HICH\af38\dbch\af31505\loch\f38 stos is possible
Here is an example with a longer portion of the input string at regex101.com
Any help would be appreciated. Thanks!
The problem is with the part you want to match those single-character samples. \w.+ requires at least two characters to match. So, for when you get "e\hich" that first backslash get matched to the dot in regex and lasts until the next backslash (which is one of the "terminators" listed in the positive lookahead portion of the regex).
You might want to use * instead of +.
The following is in PHP but the regex will also be used in javascript.
Trying to extract repeating patterns from a string
string can be any of the following:
"something arbitrary"
"D123"
"D111|something"
"D197|what.org|when.net"
"D297|who.197d234.whatever|when.net|some other arbitrary string"
I'm currently using the following regex: /^D([0-9]{3})(?:\|([^\|]+))*/
This correctly does not match the first string, matches the second and third correctly. The problem is the third and fourth only match the Dxxx and the last string. I need each of the strings between the '|' to be matched.
I'm hoping to use a regex as it makes it a single step. I realize I could just detect the leading Dxxx then use explode or split as appropriate to break the strings out. I've just gotten stuck on wanting a single regular expression match step.
This same regex may be used in Python as well so just want a generic regex solution.
There is no way to have a dynamic number of capture groups in a regular expression, but if you know some upper limit to how many parts you would have in one string, you can just repeat the pattern that many times:
/^D([0-9]{3})(?:$|\|)(.*?)(?:$|\|)(.*?)(?:$|\|)(.*?)(?:$|\|)(.*?)(?:$|\|)/
So after the initial ^D([0-9]{3})(?:$|\|) you just repeat (.*?)(?:$|\|) as many times as you need it.
When the string has fewer elements, those remaining capture groups will match the empty string.
See regex tester.
Is something like preg_match_all() (the PHP variant of a global match) also acceptable for you?
Then you could use:
^(?|D([0-9]{3})|^.+$|(?!^)\|([^|\n]*)(?=\||$))
This will match everything in a string in different matches, e.g. take your string:
D197|what.org|when.net
It will you then give three matches:
D197
what.org
when.net
Running live: https://regex101.com/r/jL2oX6/4 (Everything in green are your group matches. Ignore what's in blue.)
I am trying to find the appropriate regex pattern that allows me to pick out whole words either starting with or ending with a comma, but leave out numbers. I've come up with ([\w]+,) which matches the first word followed by a comma, so in something like:
red,1,yellow,4
red, will match, but I am trying to find a solution that will match like like the following:
red, 1 ,yellow, 4
I haven't been able to find anything that can break strings up like this, but hopefully you'll be able to help!
This regex
,?[a-zA-Z][a-zA-Z0-9]*,?
Matches 'words' optionally enclose with commas. No spaces between commas and the 'word' are permitted and the word must start with an alphanumeric.
See here for a demo.
To ascertain that at least one comma is matched, use the alternation syntax:
(,[a-zA-Z][a-zA-Z0-9]*|[a-zA-Z][a-zA-Z0-9]*,)
Unfortunately no regex engine that i am aware of supports cascaded matching. However, since you usually operate with regexen in the context of programming environments, you could repeatedly match against a regex and take the matched substring for further matches. This can be achieved by chaining or iterated function calls using speical delimiter chars (which must be guaranteed not to occur in the test strings).
Example (Javascript):
"red, 1 ,yellow, 4, red1, 1yellow yellow"
.replace(/(,?[a-zA-Z][a-zA-Z0-9]*,?)/g, "<$1>")
.replace(/<[^,>]+>/g, "")
.replace(/>[^>]+(<|$)/g, "> $1")
.replace(/^[^<]+</g, "<")
In this example, the (simple) regex is tested for first. The call returns a sequence of preliminary matches delimted by angle brackets. Matches that do not contain the required substring (, in this case) are eliminated, as is all intervening material.
This technique might produce code that is easier to maintain than a complicated regex.
However, as a rule of thumb, if your regex gets too complicated to be easily maintained, a good guess is that it hasn't been the right tool in the first place (Many engines provide the x matching modifier that allows you to intersperse whitespace - namely line breaks and spaces - and comments at will).
The issue with your expression is that:
- \w resolves to this: [a-zA-Z0-9_]. This includes numeric data which you do not want.
- You have the comma at the end, this will match foo, but not ,foo.
To fix this, you can do something like so: (,\s*[a-z]+)|([a-z]+\s*,). An example is available here.
Quite a simple one in theory but can't quite get it!
I want a regex in ant which matches anything as long as it has a slash on the end.
Below is what I expect to work
<regexp id="slash.end.pattern" pattern="*/"/>
However this throws back
java.util.regex.PatternSyntaxException: Dangling meta character '*' near index 0
*/
^
I have also tried escaping this to \*, but that matches a literal *.
Any help appreciated!
Your original regex pattern didn't work because * is a special character in regex that is only used to quantify other characters.
The pattern (.)*/$, which you mentioned in your comment, will match any string of characters not containing newlines, however it uses a possibly unnecessary capturing group. .*/$ should work just as well.
If you need to match newline characters, the dot . won't be enough. You could try something like [\s\S]*/$
On that note, it should be mentioned that you might not want to use $ in this pattern. Suppose you have the following string:
abc/def/
Should this be evaluated as two matches, abc/ and def/? Or is it a single match containing the whole thing? Your current approach creates a single match. If instead you would like to search for strings of characters and then stop the match as soon as a / is found, you could use something like this: [\s\S]*?/.
I am trying to form a regular expression that will match strings that do NOT end a with a DOT FOLLOWED BY NUMBER.
eg.
abcd1
abcdf12
abcdf124
abcd1.0
abcd1.134
abcdf12.13
abcdf124.2
abcdf124.21
I want to match first three.
I tried modifying this post but it didn't work for me as the number may have variable length.
Can someone help?
You can use something like this:
^((?!\.[\d]+)[\w.])+$
It anchors at the start and end of a line. It basically says:
Anchor at the start of the line
DO NOT match the pattern .NUMBERS
Take every letter, digit, etc, unless we hit the pattern above
Anchor at the end of the line
So, this pattern matches this (no dot then number):
This.Is.Your.Pattern or This.Is.Your.Pattern2012
However it won't match this (dot before the number):
This.Is.Your.Pattern.2012
EDIT: In response to Wiseguy's comment, you can use this:
^((?!\.[\d]+$)[\w.])+$ - which provides an anchor after the number. Therefore, it must be a dot, then only a number at the end... not that you specified that in your question..
If you can relax your restrictions a bit, you may try using this (extended) regular expression:
^[^.]*.?[^0-9]*$
You may omit anchoring metasymbols ^ and $ if you're using function/tool that matches against whole string.
Explanation: This regex allows any symbols except dot until (optional) dot is found, after which all non-numerical symbols are allowed. It won't work for numbers in improper format, like in string: abcd1...3 or abcd1.fdfd2. It also won't work correctly for some string with multiple dots, like abcd.ab123cd.a (the problem description is a bit ambigous).
Philosophical explanation: When using regular expressions, often you don't need to do exactly what your task seems to be, etc. So even simple regex will do the job. An abstract example: you have a file with lines are either numbers, or some complicated names(without digits), and say, you want to filter out all numbers, then simple filtering by [^0-9] - grep '^[0-9]' will do the job.
But if your task is more complex and requires validation of format and doing other fancy stuff on data, why not use a simple script(say, in awk, python, perl or other language)? Or a short "hand-written" function, if you're implementing stand-alone application. Regexes are cool, but they are often not the right tool to use.
I would just use a simple negative look-behind anchored at the end:
.*(?<!\\.\\d+)$