I created a WebService in MonoDevelop, the WebService is running at
localhost:8080/LoginUsr.asmx.
When I try to access from other device, I can't access because the port 8080 is closed for external connections. What can I do?
I think you need open this port/connection through firewall. I activated many times with firewall.
Related
I've developped a web shiny application.
This application is already accesible from internet ( from my house for example). But this application has to be accessible from international institutions (ambassy..). Due to their security protocol, they can not access to my application.. I think it is due to closed proxy. The link internet application is like this xxxx.xxx.xxx:8383
It's not possible to modify their internet security protocol.
Do you have any idea ? how i can make this web application accessible from (almost)anywhere.
Thanks so much
You'll need to modify the shiny-server.conf file to set the server to listen on port 80 (HTML) instead of 3838. See my answer here: Deploy an app on my own server without the port number in the address
I have web services running on my machine on a local network. Instead of connecting to them via localhost, I'd like to be able to connect to them via local IP - in this case 192.168.1.5. Once I can do this, I'll know other devices on the network can consume these web services too (in particular, my android phone).
In my project setup in Visual Studio 2013 (I am using IIS Express), if I set the project url to be http://testdomain.com:52252 and set the line in my hosts file for 192.168.1.5 testdomain.com, then connecting to testdomain.com:52252/testservices.asmx works just fine. However when I change the project url to http://192.168.1.5:52252/ and connect straight to 192.168.1.5:52252/testservices.asmx it returns Bad Request - Invalid Hostname. HTTP Error 400. The request hostname is invalid.
What is an effective way of testing web services on a local network? I need to develop and test web services and test them from an android device, but I am disallowed from developing/testing them on a live server at the moment. Are there any solutions to this?
I have looked for solutions online but have been unable to find any. I find it hard to believe there is not a common solution to this issue - surely people must have a way to test web services without hosting a server or connecting via localhost?.
I really see there being two routes to take
1) Route each domain to a vlan with it's own ip
Virtual LAN - https://en.wikipedia.org/wiki/Virtual_LAN
Configure VLANs in a Microsoft Windows Environment - http://docs.oracle.com/cd/E19407-01/820-7898-11/z40001c91004554.html
2) Create x number of virtual machines and simulate traffic
I've got it - I had heard others needing to turn off their firewall in order to get this to work. Personally I was using McAfee to manage my windows firewall - so I'd turned McAfee firewall off assuming that was enough - but I was wrong. Despite turning the firewall off, I still had to go into the advanced windows firewall settings and add an inbound rule to allow all incoming connections over the specified port. It then worked - I could call web services from other devices on the network!
The key is to edit the IIS Express file called applicationhost.config. Add a binding just like localhost, but with your IP address. Note that you have a binding configuration for each VS2012 project so put it in the one you are using.
Then right click IIS Express in the sytem tray and exit. Exit VS, then open it using Run As Administrator. That should do it.
<bindings>
<binding protocol="http" bindingInformation="*:24486:localhost" />
<binding protocol="http" bindingInformation="*:24486:192.168.4.104" />
</bindings>
CFHTTP on my new CF 9 server is failing. I get back "408 Request Time-out" when attempting to connect to the test page on the server via its internal or external IP. I am not using SSL and using the standard port 80.
My old CF 9 server can connect to itself fine but it also fails if attempting to connect to the new server.
If I RDP into the server, I am able to pull up the same test page via a web browser or via telnet to that ip port 80.
I suspect that this is a firewall issue. I'd like to know how CF makes an HTTP request under the hood before I talk to the hosting team. What service is making the call? What port is it running under, etc.
You don't say what operating system you are running under, but if it is Windows, I'd take a look at the Windows Firewall settings on your new machine, and disable the firewall. That will allow you to check if indeed it is the Firewall in the way.
If that works you can then try and add a firewall exception for the application, i.e. JRun.
Hope that helps.
I've a simple jax-ws web service that on localhost works fine with the clients, but now I want to publish the web service on a public ip, so the clients can interact with it through wan network instead lan network.
I signed to no-ip dns service provider and defined my host like "myname.no-ip.info".
In my code i start the service in this way:
Endpoint.publish("http://localhost:8080/baseStationProvider", new BaseStationProvider());
and the browser at http://myname.no-ip.info:8080/baseStationProvider#wsdl doesn't show the wsdl.
If i start the service in this way:
Endpoint.publish("http://myname.no-ip.info/baseStationProvider", new BaseStationProvider());
compiling the code, it raise this exception:
Server Runtime Error: java.net.SocketException: Unresolved address
Any idea to problem and/or how to do what i need?
thanks in advance
This seems likely to do with routing and firewalls as opposed to web service publication etc. Ignoring the web-service aspect, can you even reach your server when you use this in your browser:
http://myname.no-ip.info:8080/
?
Which should look the same as
http://localhost:8080/
If not, then it is probably DNS/Routing/Firewalls that you need to check. Diagnostics that will help there are:
1) can the machine you are testing on resolve the DNS name mynam.no-ip.info? nslookup, ping, traceroute/tracert
2) is there a firewall blocking port 8080 from reaching local host? If the route from the internet to your host hits a firewall (which it will) that firewall will have to forward the request.
Good luck.
I have a Javax web service deployed in a remote Linux machine within a JBoss ESB container. I am able to test the web service using soapUI on the same machine as where the service is deployed. The WDSL URI I used was something like http://127.0.0.1:8080/abcd/abcd?wsdl.
What I would like to do is to be able to test the same service from another machine using soapUI. I tried replacing 127.0.0.1 with the IP address of the machine where the service is deployed. This does not seem to work. Can someone tell me what I am missing here?
Thanks.
a sum of things could go wrong there - as already mentioned by the others the firewall is blocking access for the given (address, port) pair. Another thing that happened to me was that the WSDL was generated using the name of the machine it was deployed on and whenever I was trying to call the service from a different machine it was complaining that I cannot find the given machine.
You need to test network connectively. One tool you can use is plain old telnet. If you telnet to the ip/port combo of the web server, you will get a response (an HTTP error). For example:
$ telnet 192.168.0.10 8080
If you get nothing then there is almost certainly a firewall blocking access.
If you are convinced that no firewall is blocking you, the other possibility is that the web server is only bound to the local network adapter (127.0.0.1) and not the other network adapters (ethernet/wifi). This is very unlikely however.