Weka Explorer provides Time Series Forecasting perspective and it is easy to use.
However, what should I do, if I want to use KnowledgeFlow for time series forecast?
what if I want to save original dataset with predictions?
Solutions (Thanks to the help from people from WekaList, especially, Mark Hall, Eibe Frank)
Open knowledgeFlow, load dataset with ArffLoader
go to setting, check time series forecasting perspective, right-click ArffLoader to send to all perspective
go to time series forecasting perspective to set up a model
run the model and copy the model to clipboard
ctrl + v, and click to paste model to Data mining process canvas
save prediction along with original data with ArffSaver
Related
I have asked a few questions related to this personal project of mine already on this platform, and this should be the last one since I am so close to finishing. Below is the link to a mock example spreadsheet I've created, which mimics what my actual project does but it contains less sensitive information and is also smaller in size.
Mock Spreadsheet
Basic rundown of the spreadsheet:
Pulls data from a master schedule which is controlled/edited by another party into the Master Schedule tab.
In the columns adjacent to the imported data, an array formula expands the master schedule by classroom in case some of the time slots designate multiple rooms. Additional formulas adjust the date, start time, and end time to be capped within the current day's 24-hour period. The start time of each class is also made to be an hour earlier.
In the Room Schedule tab, an hourly calendar is created based on the room number in the first column, and only corresponds to the current day.
I have tested the spreadsheet extensively with multiple scenarios, and I'm happy with how everything works except for the calculation time. I figured the two volatile functions I use would take some processing time just by themselves, and I certainly didn't expect this to be lightning-fast especially without using a script, but the project that I am actually implementing this method for is much larger and takes a very long time to update. The purpose of this spreadsheet is to allow users to find an open room and "reserve" it by clicking the checkbox next to it (which will consequently color the entire row red) allowing everyone else to know that it is now taken.
I'd like to know if there is any way to optimize / speed up my spreadsheet, or to not update it every time a checkbox is clicked and instead update it "manually", similar to what OP is asking here. I am not familiar with Apps Script nor am I well-versed in writing code overall, but I am willing to learn - I just need a push in the right direction since I am going into this blind. I know the number of formulas in the Room Schedule tab is probably working against me yet I am so close to what I wanted the final product to be, so any help or insight is greatly appreciated!
Feel free to ask any questions if I didn't explain this well enough.
to speed up things you should avoid usage of the same formulae per each row and make use of arrayformulas. for example:
=IF(AND(TEXT(K3,"m/d")<>$A$1,(M3-L3)<0),K3+1,K3+0)
=ARRAYFORMULA(IF(K3:K<>"",
IF((TEXT(K3:K, "m/d")<>$A$1)*((M3:M-L3:L)<0), K3:K+1, K3:K+0), ))
=IF(AND(TEXT(K3,"m/d")=$A$1,(M3-L3)<0),TIMEVALUE("11:59:59 PM"),M3+0)
=ARRAYFORMULA(IF(K3:K<>"",
IF((TEXT(K3,"m/d")=$A$1)*((M3-L3)<0), TIMEVALUE("11:59:59 PM"), M3:M+0), ))
I have two datasets regarding whether a sentence contains a mention of a drug adverse event or not, both the training and test set have only two fields the text and the labels{Adverse Event, No Adverse Event} I have used weka with the stringtoWordVector filter to build a model using Random Forest on the training set.
I want to test the model built with removing the class labels from the test data set, applying the StringToWordVector filter on it and testing the model with it. When I try to do that it gives me the error saying training and test set not compatible probably because the filter identifies a different set of attributes for the test dataset. How do I fix this and output the predictions for the test set.
The easiest way to do this for a one off test is not to pre-filter the training set, but to use Weka's FilteredClassifier and configure it with the StringToWordVector filter, and your chosen classifier to do the classification. This is explained well in this video from the More Data Mining with Weka online course.
For a more general solution, if you want to build the model once then evaluate it on different test sets in future, you need to use InputMappedClassifier:
Wrapper classifier that addresses incompatible training and test data
by building a mapping between the training data that a classifier has
been built with and the incoming test instances' structure. Model
attributes that are not found in the incoming instances receive
missing values, so do incoming nominal attribute values that the
classifier has not seen before. A new classifier can be trained or an
existing one loaded from a file.
Weka requires a label even for the test data. It uses the labels or „ground truth“ of the test data to compare the result of the model against it and measure the model performance. How would you tell whether a model is performing well, if you don‘t know whether its predictions are right or wrong. Thus, the test data needs to have the very same structure as the training data in WEKA, including the labels. No worries, the labels are not used to help the model with its predictions.
The best way to go is to select cross validation (e.g. 10 fold cross validation) which automatically will split your data into 10 parts, using 9 for training and the remaining 1 for testing. This procedure is repeated 10 times so that each of the 10 parts has once been used as test data. The final performance verdict will be an average of all 10 rounds. Cross validation gives you a quite realistic estimate of the model performance on new, unseen data.
What you were trying to do, namely using the exact same data for training and testing is a bad idea, because the measured performance you end up with is way too optimistic. This means, you‘ll get very impressive figures like 98% accuracy during testing - but as soon as you use the model against new unseen data your accuracy might drop to a much worse level.
i'm using weka to do some text mining, i'm a little bit confused so i'm here to ask how can i ( with a set of comments that are in a some way classified as: notes, status of work, not conformity, warning) predict if a new comment belong to a specific class, with all the comment (9551) i've done a preprocess obtaining with the filter "stringtowordvector" a vector of tokens, and then i've used the simple kmeans to obtain a number of cluster.
So the question is: if a user post a new comment can i predict with those data if it belong to a category of comment?
sorry if my question is a little bit confused but so am i.
thank you
Trivial Training-validation-test
Create two datasets from your labelled instances. One will be training set and the other will be validation set. The training set will contain about 60% of the labelled data and the validation will contain 40% of the labelled data. There is no hard and fast rule for this split, but a 60-40 split is a good choice.
Use K-means (or any other clustering algorithm) on your training data. Develop a model. Record the model's error on training set. If the error is low and acceptable, you are fine. Save the model.
For now, your validation set will be your test dataset. Apply the model you saved on your validation set. Record the error. What is the difference between training error and validation error? If they both are low, the model's generalization is "seemingly" good.
Prepare a test dataset where you have all the features of your training and test dataset but the class/cluster is unknown.
Apply the model on the test data.
10-fold cross validation
Use all of your labelled data instances for this task.
Apply K-means (or any other algorithm of your choice) with a 10-fold CV setup.
Record the training error and CV error. Are they low? Is the difference between the errors is low? If yes, then save the model and apply it on the test data whose class/cluster is unknown.
NB: The training/test/validation errors and their differences will give you an "very initial" idea of overfitting/underfitting of your model. They are sanity tests. You need to perform other tests like learning curves to see if your model overfits or underfits or perfect. If there appears to be an overfitting and underfitting problem, you need to try many different techniques to overcome them.
I want to build a website with a map based on openstreetmap that colors buildings based on a their potential average annual yield of solar power. I have the energy data for individual houses.
My question is now, can I assign each house (identified by street name and number) a value and the house can then be colored based on this value in the browser?
I have little to no experience with openstreetmap and would be happy about hints into the right direction.
So you need a OSM dataset and filter it for building=* ways to get the building outlines (e.g. with osmosis). Then you do create a second run to filter for addr:= tags of nodes and merge them with the building outlines from step 1. Be aware of conflicts and that one building can have multiple addresses. So now you have a dataset with normalized addresses and need to create a lookup structure like hashmap to get a mapping for your solar data: addr:street x addr:housenumber -> building id
(very raw idea on how to do it)
IMHO the mixing of external datasources to the copyleft open database license makes that you need to relicense your dataset also under ODbL.
Also keep in mind that not every address is currently at OSM and the existing ones can be wrong!
I have two data sets, one for training and one for testing.
I am going to predict the values of a column with numerical type in test data set. In order to predict the value of an instance, I have to find the k nearest neighbors of that instance in training data set, and calculate the average of values. (waiting also can be used).
For example:
column0 column1 column2
......a..................b....................10
......a..................b....................12
......c..................d....................16
......a..................b....................?
I need a method of data mining to give me the result = (10+12)/2 = 11
Which method should I use to get such a result?
And do you know any good document which explains how to use that method?
KNN in Weka is implemented as IBk. It is capable of predicting numerical and nominal values.
If you are using the Weka Explorer (GUI) you can find it by looking for the "Choose" button under the Classify tab. Once there navigate the folders:
classifiers -> lazy -> IBk
Once you select IBk, click on the box immediately to the right of the button. This will open up a large number of options. If you then click on the button "More" in the options window, you will see all of the options explained. If you need more of an explanation of the classifier they even list the academic paper that the classifier is based on. You can do this for all of the classifiers to obtain additional information.