I'm just getting started on AWS EC2. I understand that EC2 is like a remote computer where I can do pretty much everything I want. Then I found out about ECS. I know it uses Docker, but I'm confused about the relationship between these two.
Is ECS just a Docker install in EC2?
If I already have an EC2 and I start an ECS, does it mean I have two instances?
Your question
Is ECS just a docker install in EC2? If I already have a EC2, then I
start a ECS, does it mean I have two instance?
No. AWS ECS is just a logical grouping (cluster) of EC2 instances, and all the EC2 instances part of an ECS act as Docker host i.e. ECS can send command to launch a container on them (EC2).
If you already have an EC2, and then launch ECS, you'll still have a single instance. If you add/register (by installing the AWS ECS Container Agent) the EC2 to ECS it'll become the part of the cluster, but still a single instance of EC2.
An Amazon ECS without any EC2 registered (added to the cluster) is good for nothing.
TL; DR
An overview
EC2 - is simply a remote (virtual) machine.
ECS stands for Elastic Container Service - as per basic definition of computer cluster, ECS is basically a logical grouping of
EC2 machines/instances. Technically speaking ECS is a mere
configuration for an efficient use and management of your EC2
instance(s) resources i.e. storage, memory, CPU, etc.
To simplify it further, if you have launched an Amazon ECS with no EC2 instances added to it, it's good for nothing i.e. you can't do anything about it. ECS makes sense only once one (or more) EC2 instances are added to it.
The next confusing thing here is the container term - which is not fully virtualized machine instances, and Docker is one technology we can use to create container instances. Docker is a utility you can install on our machine, which makes it a Docker host, and on this host you can create containers (same as virtual machines - but much more light-weight). To sum up, ECS is just about clustering of EC2 instances, and uses Docker to instantiate containers/instances/virtual machines on these (EC2) hosts.
All you need to do is launch an ECS, and register/add as much EC2 instances to it as you need. You can add/register EC2 instances, all you need is Amazon ECS Container Agent running on your EC2 instance/machine, which can be done manually or directly using the special AMI (Amazon Machine Image) i.e. Amazon ECS-optimized AMI, which already has the Amazon ECS Container Agent. During the launch of a new EC2 instance the Agent automatically registers it to the default ECS cluster.
The container agent running on each of the instances (EC2 instances) within an Amazon ECS cluster sends information about the instance's current running tasks and resource utilization to Amazon ECS, and starts and stops tasks whenever it receives a request from Amazon ECS. For more information, see Amazon ECS Container Agent. Once set, each of the created container instances (of whatever EC2 machine/node) will be an instance in Amazon ECS's swarm.
For more information – read step 10 from this documentation: Launching an Amazon ECS Container Instance:
Choose an AMI for your container instance. You can choose the Amazon
ECS-optimized AMI, or another operating system, such as CoreOS or
Ubuntu. If you do not choose the Amazon ECS-optimized AMI, you need to
follow the procedures in Installing the Amazon ECS Container Agent.
By default, your container instance launches into your default
cluster. If you want to launch into your own cluster instead of the
default, choose the Advanced Details list and paste the following
script into the User data field, replacing your_cluster_name with the
name of your cluster.
#!/bin/bash
echo ECS_CLUSTER=your_cluster_name >> /etc/ecs/ecs.config
Or, if you have an ecs.config file in Amazon S3 and have enabled
Amazon S3 read-only access to your container instance role, choose the
Advanced Details list and paste the following script into the User
data field, replacing your_bucket_name with the name of your bucket to
install the AWS CLI and write your configuration file at launch time.
Note For more information about this configuration, see Storing
Container Instance Configuration in Amazon S3.
#!/bin/bash
yum install -y aws-cli
aws s3 cp s3://your_bucket_name/ecs.config /etc/ecs/ecs.config
Just to clarify it further – you can create containers on your single EC2 instance without ECS. Install any of the containerization technology i.e. Docker and run the create container command, setting your EC2 as a Docker host, and have as much Docker containers as you want (or as much as your EC2's resources allow).
In simple words,ECS is a manager while EC2 instances are just like employees.
All the employees (EC2) under this manager(ECS) can perform "Docker" tasks and the manager also understands "docker" pretty well. So,whenever you need "docker" resources, you show up to the Manager. Manager already has status from every employee(EC2) decides which one should perform the task.
Now, coming back to your question, a manager without an "employee" does not make sense but is definitely possible.
EC2 allows you to launch individual instances which you can use for pretty much whatever you like.
ECS is a container service, which means it will launch instances that will be ready to launch container applications.
The main distinction between the two services is that with EC2 you have to manage each instance separately in whatever method you choose (manually, using a CM tool or any other way) - deploy your applications and maintain the connection between the servers yourself.
ECS allows you to launch a cluster of machines that will serve as the deployment ground of your container apps, allowing you to treat all instances in the cluster as one big instance available for your container workload.
And to answer your question - You can start an ECS cluster with no instances in it, but then it won't be able to run anything on it. Once you register an EC2 instance inside an ECS cluster, containers are ready to run in it. So the bottom line is - you can use both ECS and EC2 with only one instance, but that is not the actual use case these services were built for.
Put simply, Elastic Container Service (ECS) is a Docker container orchestration service.
You can ask it to run one or more Docker images, either as an auto-scaling capable "Service" or as an ad-hoc "Task".
The services and tasks run on a "Cluster". Originally, a Cluster was a group of one or more pre-configured EC2 servers running ECS Cluster Agent. The Cluster Agent would schedule the containers on the EC2 server. These EC2 servers show up in your EC2 Instances list and are charged at regular EC2 per-minute costs - You can even SSH onto them like any normal EC2 server.
If you wanted more capacity to run more Services or Tasks, or if you wanted resilience against EC2 failure, then you would more EC2 servers.
Around November 2017, AWS added ECS Fargate. Now a Cluster can run "serverless" without provisioning EC2 nodes. You simply define the amount of CPU and memory your Task or Service requires to operate, meaning that you just pay for the CPU and memory time rather than the EC2.
ECS stands for 'Elastic Container Service'. It is a container orchestration service.
Lets say you have a Docker container running and you decide to update the Docker image. It's relatively easy task to stop, pull and run if you have one container running but its tedious to do the same steps if you have 10 to 100 of containers running.
With AWS ECS you can have this control. You specify if update is required provide the latest image id and ECS will handle the stop, pull and run etc. commands for you. It also provides with much more additional features, refer - https://aws.amazon.com/ecs/features/
EC2 stand for 'Elastic Compute Cloud'. In simple terms its a virtual machine.
ECS uses EC2 to run your containers.
'These running docker containers (tasks) are run on EC2 instances'.
ECS is a container orchestrator just like Kubernetes or Docker swarm, EC2 is an Amazon Elastic Compute Cloud platform for Creating Virtual Machines. ECS allows you to run containers on either serverless environments (Fargate) where you don't have to run any VM or in a non managed environments where you host the containers on EC2 instances.
Okay, as you know EC2 is a virtual machine on AWS and ECS is a container orchestration system on AWS.
To use ECS, you need to run your container into some virtual machines which EC2 is one of an option to provide that.
You will need to install ecs-agent on EC2 to make a connection with ECS. And ECS also can monitor the resource usages on your EC2. So basically you choose the more high-level EC2 type, then more resource(CPU/MEM) your container can use.
EC2 is a compute service that enables applications to run on AWS, whereas ECS is an AWS service used primarily to orchestrate Docker containers.
Related
Is it possible to have nested virtualization in AWS with the EC2 in order to use Docker or Kubernetes or should I rather use the ECS (elastic container service) for Docker or EKS ( elastic kubernetes service) for Kubernetes?
-The reason I am asking this question is first if is possible to run docker or kubernetes on EC2 and in case I can why there are such services as EKS and ECS?
Thank you in advance!
Yes, you can run a container on a VM. This is described in Docker's introductory documentation. ECS and EKS both have the option to run on EC2 instances. The reason to use ECS and EKS is to outsource the management of the orchestration tooling. Many people have and continue to manage the orchestration themselves for either control or cost savings, while many others look for opportunities to outsource these pieces.
I am trying to develop a spring cloud micro services. And I planned to deploy into AWS cloud. When I reading AWS resources I found that ECS providing configuration less environment for deploying microservices other than EC2. My doubt is that
Can I choose ECS resource for my complete services deployment without configurations?
For creating ECS service, is EC2 instance mandatory? Can I use ECS only in my account without creating EC2 VM? I need to know about ECS is alternative for EC2?
ECS is a service which offers clustering of vm for docker container, manages container lifecycle.
1) Yes. You can use ECS for your service deployment and it needs some basic configuration which will be one time.
2) No. To run docker container you need EC2 instance without that its not possible to run. EC2 instance are managed by ECS so you only need to provide some config like region,security group etc.
For complete config and deployment refer below link.
https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ECS_GetStarted.html
I need to build a docker image and send it to an ECS repository.
Because my company's internet access is quite poor, I'm using an EC2 to achieve this.
I call docker push on the EC2, so I believe it may work similar as it is mentionned here with the cli.
My question is : As I am on the same AWS account and region, is my image transfer using docker push considered an external or an internal transfer ?
This has an impact on both speed and pricing.
I assume you mean building a docker image on a EC2 and then pushing to ECR. After this the ECS cluster will pull the image and run as a container?
In this case, see this relevant ECR FAQ question from https://aws.amazon.com/ecr/faqs/
Q: Is Amazon ECR a global service? Amazon ECR is a regional service
and is designed to give you flexibility in how images are deployed.
You have the ability to push/pull images to the same region where your
Docker cluster runs for the best performance. You can also access
Amazon ECR anywhere that Docker runs such as desktops and on-premises
environments. Pulling images between regions or out to the internet
will have additional latency and data transfer costs.
assuming that the EC2 with the cli on it and the EC2 with the ECS servers running on them are in the same zone and account then there is no charge
Remember that ECS is simply running on EC2..see the ECS FAQ
Amazon Elastic Container Service (ECS) is a highly scalable, high
performance container management service that supports Docker
containers and allows you to easily run applications on a managed
cluster of Amazon EC2 instances
If they are in a different zone then there is a charge, even in the same account
See https://aws.amazon.com/govcloud-us/pricing/data-transfer/
I think you are referring to Amazon's Elastic Container Registry (ECR).
Th ECR pricing page indicates that "Data transferred between Amazon Elastic Container Registry and Amazon EC2 within a single region is free of charge".
I'm planning to use Docker, and associate 1 EC2 instance with 1 Microservice.
Why do I want to deploy Docker in AWS ECS vs. ElasticBeanstalk?
It is said that AWS ECS has a native support to Docker. Is that it?
It would be great if you could be elaborate the pros and cons of running docker on AWS ECS vs. ElasticBeanstalk.
Elastic Beanstalk (multi-container) is an abstraction layer on top of ECS (Elastic Container Service) with some bootstrapped features and some limitations:
Automatically interacts with ECS and ELB
Cluster health and metrics are readily available and displayed without any extra effort
Load balancer must terminate HTTPS and all backend connections are HTTP
Easily adjustable autoscaling and instance sizing
Container logs are all collected in one place, but still segmented by instance – so in a cluster environment finding which instance served a request that logged some important data is a challenge.
Can only set hard memory limits in container definitions
All cluster instances must run the same set of containers
As of ECS IT is Amazon’s answer to container orchestration. It’s a bit rough around the edges and definitely a leap from Elastic Beanstalk, but it does have the advantage of significantly more flexibility including the ability to even define a custom scheduler.
All of the limitations imposed by Elastic Beanstalk are lifted.
Refer these for more info :
Elastic Beanstalk vs. ECS vs. Kubernetes
Amazon EC2 Container Serivce
Amazon Elasticbeanstalk
I have some docker images (hosted privately on dockerhub, although I can host them on ECS or anywhere else as well if absolutely need be). I want to deploy to AWS. I want to be able to essentially map one docker image to one ec2 instance and have them be separate. I did my prior research and I found articles mentioning a cluster but that's not what I'm looking to do. Is there a way to simply deploy a docker image on a single EC2 instance?
The easiest way to deploy one Docker Image to one EC2 instance in AWS is to use Elastic Beanstalk Single Container Docker Configuration, which will also setup auto-scaling and load balancing for your containers keeping one Container for one EC2 instance.
Once you have docker running on a EC2 instance you can run any docker container there.
So what you need to do is to run a EC2 instance with your preferred OS, install Docker, point the registry to the one you're using and spin up containers. All you need to make sure is that you can access the private registry from your EC2 instance.