I tried to run aws lambda publish-layer-version command line in my local console using my personal aws credentials, but I've got an Amazon S3 Access Denied error for the bucket in which the zip layer is stored.
aws lambda publish-layer-version --layer-name layer_name --content S3Bucket=bucket_name,S3Key=layers/libs.zip
An error occurred (AccessDeniedException) when calling the PublishLayerVersion operation: Your access has been denied by S3, please make sure your request credentials have permission to GetObject for {URI of layer in my S3 bucket}. S3 Error Code: AccessDenied. S3 Error Message: Access Denied
When I'm running the aws cp command in the same bucket, it all works perfectly fine
aws s3 cp s3://bucket_name/layers/libs.zip libs.zip
So I assume that the aws lambda command line is using an other role than the one used when I'm running the aws cp command line ? Or maybe it uses another mecanism that I just don't know. But I couldn't find any thing about it in the AWS documentation.
I've just read that AWS can return a 403 it couldn't find the file. So maybe it could be an issue with the command syntax ?
Thank you for your help.
For your call to publish-layer-version you may need to specify the --content parameter with 3 parts:
S3Bucket=string,S3Key=string,S3ObjectVersion=string
It looks like you are missing S3ObjectVersion. I don't know what the AWS behavior is for evaluating and applying the parts of that parameter, but it could be attempting to do something more since the version is not specified and hence giving you that error. Or it could be returning an error code that is not quite right and is misleading. Try adding S3ObjectVersion and let me know what you get.
Otherwise, AWS permission evaluation can be complex. I like this AWS diagram below, so it is a good one to follow to track down permissions issues, but I suspect that AccessDenied is a bit of a red herring in this case:
Your Lambda does not have privileges (S3:GetObject).
Try running aws sts get-caller-identity. This will give you the IAM role your command line is using.
Go to IAM dashboard, check this role associated with your Lambda execution. If you use AWS wizard, it automatically creates a role called oneClick_lambda_s3_exec_role. Click on Show Policy. It will look something like attached image.Make sure S3:GetObject is listed.
Also, AWS returns 403 (access denied) when the file does not exist. Be sure the target file is in the S3 bucket.
I was able to install CLI on windows 16 AWS instance. when I try "aws ec2 describe-instances" CLI command, I get the following error
CLI command "describe-instances" throw error "An error occurred (AuthFailure) when calling the DescribeInstances operation: AWS was not able to validate the provided access credentials"
In .aws\config file I have following content:
[default]
region = us-west-2
How can authorization fail when it took my access key id and secret access key without any issue.
Verify if your datetime is sync ok.
use: ntpdate ntp.server
bests
I deleted my two configuration files from .aws directory and re-ran "aws config"
That fixed the problem for me.
My Steps:
Go to your .aws directory under Users e.g. "c:\Users\Joe\.aws"
Two files: configure and credential. Delete both files
Rerun configure: "aws configure"
Note when you run aws configure you will need the AWS Access and Secret Key. If you don't have them you can just create another.
Steps:
Goto "My Security Credentials" Under you Account Name in AWS Console.
Expand Access Key panel.
Create New Access Key.
When you first ran aws configure, it just populated the local credentials in %UserProfile%\.aws\credentials; it didn't validate them with AWS.
(aws-cli doesn't know what rights your user has until it tries to do an operation -- all of the access control happens on AWS's end. It just tries to do what you ask, and tells you if it doesn't have access, like you saw.)
That said, if you're running the CLI from an AWS instance, you might want to consider applying a role to that instance, so you don't have to store your keys on the instance.
My Access and Security keys are correct. My server time was good. I got error while using Ap-south-1 region. After I changed my region to us-west-2, it worked without any problem.
I tried setting that too on my windows environment. didn't work and getting error above.
so I tried setting my environment
SET AWS_ACCESS_KEY_ID=YOUR_ACCESS_KEY
SET AWS_SECRET_ACCESS_KEY=***YOUR_SECRET_ACCESS_KEY*
and then tried running command like "aws ec2 describe-instance"
I tried many things. Finally, just uninstalling and installing again (not repairing) did the trick. Just make sure to save a copy of your credentials (key and key ID) to use later when calling aws configure.
I created a new Access Key and configured that in the AWS CLI with aws configure. It created the .ini file in ~/.aws/config. When I run aws s3 ls it gives:
A client error (InvalidAccessKeyId) occurred when calling the ListBuckets operation: The AWS Access Key Id you provided does not exist in our records.
AmazonS3FullAccess policy is also attached to the user. How to fix this?
It might be happening that you have the old keys exported via env variables (bash_profile) and since the env variables have higher precedence over credential files it is giving the error "the access key id does not exists".
Remove the old keys from the bash_profile and you would be good to go.
Happened with me once earlier when I forgot I have credentials in bash_profile and gave me headache for quite some time :)
It looks like some values have been already set for the environment variables AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.
If it is like that, you could see some values when executing the below commands.
echo $AWS_SECRET_ACCESS_KEY
echo $AWS_ACCESS_KEY_ID
You need to reset these variables, if you are using aws configure
To reset, execute below commands.
unset AWS_ACCESS_KEY_ID
unset AWS_SECRET_ACCESS_KEY
Need to add aws_session_token in credentials, along with aws_access_key_id,aws_secret_access_key
None of the up-voted answers work for me. Finally I pass the credentials inside the python script, using the client API.
import boto3
client = boto3.client(
's3',
aws_access_key_id=ACCESS_KEY,
aws_secret_access_key=SECRET_KEY,
aws_session_token=SESSION_TOKEN)
Please notice that the aws_session_token argument is optional. Not recommended for public work, but make life easier for simple trial.
For me, I was relying on IAM EC2 roles to give access to our machines to specific resources.
I didn't even know there was a credentials file at ~/.aws/credentials, until I rotated/removed some of our accessKeys at the IAM console to tighten our security, and that suddenly made one of the scripts stop working on a single machine.
Deleting that credentials file fixed it for me.
I made the mistake of setting my variables with quotation marks like this:
AWS_ACCESS_KEY_ID="..."
You may have configured AWS credentials correctly, but using these credentials, you may be connecting to some specific S3 endpoint (as was the case with me).
Instead of using:
aws s3 ls
try using:
aws --endpoint-url=https://<your_s3_endpoint_url> s3 ls
Hope this helps those facing the similar problem.
you can configure profiles in the bash_profile file using
<profile_name>
aws_access_key_id = <access_key>
aws_secret_access_key = <acces_key_secret>
if you are using multiple profiles. then use:
aws s3 ls --profile <profile_name>
You may need to set the AWS_DEFAULT_REGION environment variable.
In my case, I was trying to provision a new bucket in Hong Kong region, which is not enabled by default, according to this:
https://docs.aws.amazon.com/general/latest/gr/s3.html
It's not totally related to OP's question, but to topic per se, so if anyone else like myself finds trapped on this edge case:
I had to enable that region manually, before operating on that AWS s3 region, following this guide: https://docs.aws.amazon.com/general/latest/gr/rande-manage.html
I have been looking for information about this problem and I have found this post. I know it is old, but I would like to leave this post in case anyone has problems.
Okay, I have installed the AWS CLI and opened:
It seems that you need to run aws configure to add the current credentials. Once changed, I can access
Looks like ~/.aws/credentials was not created. Try creating it manually with this content:
[default]
aws_access_key_id = sdfesdwedwedwrdf
aws_secret_access_key = wedfwedwerf3erfweaefdaefafefqaewfqewfqw
(on my test box, if I run aws command without having credentials file, the error is Unable to locate credentials. You can configure credentials by running "aws configure".)
Can you try running these two commands from the same shell you are trying to run aws:
$ export AWS_ACCESS_KEY_ID=AKIAIOSFODNN7EXAMPLE
$ export AWS_SECRET_ACCESS_KEY=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY
and then try aws command.
another thing that can cause this, even if everything is set up correctly, is running the command from a Makefile. for example, I had a rule:
awssetup:
aws configure
aws s3 sync s3://mybucket.whatever .
when I ran make awssetup I got the error: fatal error: An error occurred (InvalidAccessKeyId) when calling the ListObjects operation: The AWS Access Key Id you provided does not exist in our records.. but running it from the command line worked.
Adding one more answer since all the above cases didn't work for me.
In AWS console, check your credentials(My Security Credentials) and see if you have entered the right credentials.
Thanks to this discussion:
https://forums.aws.amazon.com/message.jspa?messageID=771815
This could happen because there's an issue with your AWS Secret Access Key. After messing around with AWS Amplify, I ran into this issue. The quickest way is to create a new pair of AWS Access Key ID and AWS Secret Access Key and run aws configure again.
I works for me. I hope this helps.
To those of you who run aws s3 ls and getting this exception. Make sure You have permissions to all regions under the provided AWS Account. When running aws s3 ls you try to pull all the s3 buckets under the AWS Account. therefore, in case you don't have permissions to all regions, you'll get this exception - An error occurred (InvalidAccessKeyId) when calling the ListBuckets operation: The AWS Access Key Id you provided does not exist in our records.
Follow Describing your Regions using the AWS CLI for more info.
I had the same problem in windows and using the module aws-sdk of javascript. I have changed my IAM credentials and the problem persisted even if i give the new credentials through the method update like this
s3.config.update({
accessKeyId: 'ACCESS_KEY_ID',
secretAccessKey: 'SECRET_ACCESS_KEY',
region: 'REGION',
});
After a while i found that the module aws-sdk had created a file inside the folder User on windows with this path
C:\Users\User\.aws\credentials
. The credentials inside this file take precedence over the other data passed through the method update.
The solution for me was to write here
C:\Users\User\.aws\credentials
the new credentials and not with the method s3.config.update
Kindly export the below variables from the credential file from the below directory.
path = .aws/
filename = credentials
export aws_access_key_id = AK###########GW
export aws_secret_access_key = g#############################J
Hopefully this saves others from hours of frustration:
call aws.config.update({ before initializing s3.
const AWS = require('aws-sdk');
AWS.config.update({
accessKeyId: 'AKIAW...',
secretAccessKey: 'ptUGSHS....'
});
const s3 = new AWS.S3();
Credits to this answer:
https://stackoverflow.com/a/61914974/11110509
I tries below steps and it worked:
1. cd ~
2. cd .aws
3. vi credentials
4. delete
aws_access_key_id =
aws_secret_access_key =
by placing cursor on that line and pressing dd (vi command to delete line).
Delete both the line and check gain.
If you have an AWS Educate account and you get this problem:
An error occurred (InvalidAccessKeyId) when calling the ListBuckets operation: The AWS Access Key Id you provided does not exist in our records".
The solution is here:
Go to your C:/ drive and search for .aws folder inside your main folder in windows.
Inside that folder you get the "credentials" file and open it with notepad.
Paste the whole key credential from AWS account to the same notepad and save it.
Now you are ready to use you AWS Educate account.
Assuming you already checked Access Key ID and Secret... you might want to check file team-provider-info.json which can be found under amplify/ folder
"awscloudformation": {
"AuthRoleName": "<role identifier>",
"UnauthRoleArn": "arn:aws:iam::<specific to your account and role>",
"AuthRoleArn": "arn:aws:iam::<specific to your account and role>",
"Region": "us-east-1",
"DeploymentBucketName": "<role identifier>",
"UnauthRoleName": "<role identifier>",
"StackName": "amplify-test-dev",
"StackId": "arn:aws:cloudformation:<stack identifier>",
"AmplifyAppId": "<id>"
}
IAM role being referred here should be active in IAM console.
If you get this error in an Amplify project, check that "awsConfigFilePath" is not configured in amplify/.config/local-aws-info.json
In my case I had to remove it, so my environment looked like the following:
{
// **INCORRECT**
// This will not use your profile in ~/.aws/credentials, but instead the
// specified config file path
// "dev": {
// "configLevel": "project",
// "useProfile": false,
// "awsConfigFilePath": "/Users/dev1/.amplify/awscloudformation/cEclTB7ddy"
// },
// **CORRECT**
"dev": {
"configLevel": "project",
"useProfile": true,
"profileName": "default",
}
}
Maybe you need to active you api keys in the web console, I just saw that mine were inactive for some reason...
Thanks, everyone. This helped to solve.
Something somehow happened which changed the keys & I didn't realize since everything was working fine until I connected to S3 from a spark...then from the command line also error started coming even in AWS s3 ls
Steps to solve
Run AWS configure to check if keys are set up (verify from last 4 characters & just keep pressing enter)
AWS console --> Users --> click on the user --> go to security credentials--> check if the key is the same that is showing up in AWS configure
If both not the same, then generate a new key, download csv
run --> AWS configure, set up new keys
try AWS s3 ls now
Change keys at all places in my case it was configs in Cloudera.
I couldn't figure out how to get the system to accept my Vocareum credentials so I took advantage of the fact that if you configure your instance to use IAM roles, the SDK automatically selects the IAM credentials for your application, eliminating the need to manually provide credentials.
Once a role with appropriate permissions was applied to the EC2 instance, I didn't need to provide any credentials.
Open the ~/.bash_profile file and edit the info with the new values that you received at the time of creating the new user:
export AWS_ACCESS_KEY_ID=
export AWS_SECRET_ACCESS_KEY=
export AWS_DEFAULT_REGION=us-east-1
Afterward, run the command:
source ~/.bash_profile
This will enable the new keys for the local machine. Now, we will need to configure the info in the terminal as well. Run the command -
aws configure
Provide the new values as requested and you are good to go.
In my case, I was using aws configure
However, I hand-edited the .aws/config file to export the KeyID and key environment variables.
This apparently caused a silent error and saw the error listed above.
I solved this by destroying the .aws directory and running aws configure again.
I have encountered this issue when trying to export RDS Postgres data to S3 following this official guide.
TL;DR Troubleshooting tips:
Reset RDS credentials using:
DROP EXTENSION aws_s3 CASCADE;
DROP EXTENSION aws_commons CASCADE;
CREATE EXTENSION aws_s3 CASCADE;
Delete and add DB instance role used for s3Export feature. Optionally reset RDS credentials (previous action point) once again after that.
Below you will find more details on my case.
In particular, I have encountered:
[XX000] ERROR: could not upload to Amazon S3
Details: Amazon S3 client returned 'The AWS Access Key Id you provided does not exist in our records.'.
To be able to perform export to S3, RDS DB instance should be configured to assume a role with permission to write to S3 bucket, the guide describes these steps.
The reason of an error was in aws_s3.query_export_to_s3 Postgres procedure using some (cached?) invalid assumed credentials. I am still not aware which credentials has it been using but I have managed to achieve the same behaviour using AWS CLI:
I have assumed a role (aws sts assume-role),
And then tried to perform another action (aws s3 cp in particular) with this credentials without session token (only AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY without AWS_SESSION_TOKEN).
This resulted in the same error from AWS CLI: An error occurred (InvalidAccessKeyId) when calling the PutObject operation: The AWS Access Key Id you provided does not exist in our records.
In short: hard resetting RDS credentials helped.
I just found another cause/remedy for this error/situation. I was getting the error running a PowerShell script. The error was happening on an execution of Write-S3Object. I have been working with AWS for a while now and have been running this script with success, but had not run it in a while.
My usual method of setting AWS credentials is:
Set-AWSCredential -ProfileName <THE_PROFILE_NAME>
I tried the "aws configure" command and every other recommendation in this forum post. No luck.
Well, I am aware of the .aws\credentials file and took a look in there. I have only three profiles, with one being [default]. Everything was looking good, but then I noticed a new element in there, present in all 3 profiles, that I had not seen before:
toolkit_artifact_guid=64GUID3-GUID-GUID-GUID-004GUID236
(GUID redacting added by me)
Then I noticed this element differed between the profile I was running with and the [default] profile, which was the same profile, except for that.
On a hunch I changed the toolkit_artifact_guid in the [default] to match it to my target profile, and no more error. I have no idea why.
I have the AWS cli installed on an EC2 instance, and I configured it by running aws configure and giving it my AWSAccessKeyId and AWSSecretKey keys so if I run the command aws s3 ls it returns the name of my S3 bucket (call it "mybucket").
But, if I then try aws s3 cp localfolder/ s3://mybucket/ --recursive I get an error that looks like
A client error (AccessDenied) occurred when calling the CreateMultipartUpload operation: Anonymous users cannot initiate multipart uploads. Please authenticate.
I thought that by running aws configure and giving it my root key that I was effectively giving the aws cli everything it needs to authenticate? Is there something I am missing regarding copying to an S3 bucket as opposed to listing them?
Thought I would add in a very similar issue that I had where I could list buckets but could not write to a given bucket returning the error
An error occurred (AccessDenied) when calling the
CreateMultipartUpload operation: Access Denied
If the bucket uses server-side encryption you'll need to add the --sse flag to be able to write to this bucket.
https://docs.aws.amazon.com/cli/latest/reference/s3/cp.html
Root Access keys and Secret key have full control and full privileges to interact with the AWS. Please try running the aws configure again to recheck the setting and try again.
PS: it is highly not recommended to use root access keys - please give a thought is creating an IAM ( which take admin privileges- like root ) and use those.
If you have environment variables AWS_SECRET_ACCESS_KEY, AWS_ACCESS_KEY_ID and AWS_REGION set, AWS CLI gives higher precedence to them, and not to credentials you specify with aws configure.
So, in my case, bash command unset AWS_ACCESS_KEY_ID AWS_SECRET_ACCESS_KEY solved the problem.