I am trying to match strings of digits that contain non-digits within them. Using the default text in http://regexr.com/, the following should match:
v2.1
-98.7
3.141
.6180
9,000
+42
555.123.4567
+1-(800)-555-2468
The following should not match:
0123456789
12345
I tried:
/[^\n\ ]{1,}\d+\S+\d/g
But it would not match +42 and it incorrectly matched 0123456789 and 12345, and it treated "555.123.4567 +1-(800)-555-2468" as one string.
I tried to alleviate it by putting a $ at the end but that matched nothing. Not sure what I am doing wrong.
You can use this regex to match any text with at least one non-digit:
/^\d*[^\d\n]+\d.*$/mg
RegEx Demo
RegEx Breakup:
^ - Start
\d* - Match 0 or more digits
[^\d\n]+ - Match 1 or more of any character that is not a digit and not a newline
\d - Match a digit
.* - Match 0 or more of any character
$ - End
Try this:
^(?=.*\d)(?=.*[^\d\s])\S+$
This means "at least one digit and one non-digit and no whitespace".
See live demo.
If no newlines were in your input, you could use slightly simpler:
^(?=.*\d)(?=.*\D)\S+$
Aren't you over-thinking this massively? What's wrong with using /\D/ to match a string that contains a non-digit?
I'm not sure what your exact requirements are, but if you're looking for a string that contains at least one digit and at least one non-digit, then the easiest approach is to use to regex matches - /\d/ && /\D/.
#!/usr/bin/perl
use strict;
use warnings;
use 5.010;
while (<DATA>) {
chomp;
say "$_: " . (/\d/ && /\D/ ? 'matches' : 'doesn\'t match');
}
__DATA__
v2.1
-98.7
3.141
.6180
9,000
+42
555.123.4567
+1-(800)-555-2468
0123456789
12345
Looks like you want to dodge strings made up entirely of digits, or entirely of letters. So you can exclude those. That will also let in strings without any numbers, so also require a number.
my $exclude = qr/(?: [0-9]+ | [A-Za-z]+ )/x;
my #res = grep { not /^$exclude$/ and /\d/ } #strings;
If any other characters need be excluded (underscore?), add it to the list.
It is not clear how your input is coming, this takes a list of ready strings. Add word boundaries and/or /s, depending on the input. Or parse the input into a list of strings for this.
If input comes as as a multi-line string, my #strings = split '\n|\s+', $text;.
Related
i searching to find some Perl Regular Expression Syntax about some requirements i have in a project.
First i want to exclude strings from a txt file (dictionary).
For example if my file have this strings:
path.../Document.txt |
tree
car
ship
i using Regular Expression
a1testtre -- match
orangesh1 -- match
apleship3 -- not match [contains word from file ]
Also i have one more requirement that i couldnt solve. I have to create a Regex that not allow a String to have over 3 times a char repeat (two chars).
For example :
adminnisstrator21 -- match (have 2 times a repetition of chars)
kkeeykloakk -- not match have over 3 times repetition
stack22ooverflow -- match (have 2 times a repetition of chars)
for this i have try
\b(?:([a-z])(?!\1))+\b
but it works only for the first char-reppeat
Any idea how to solve these two?
To not match a word from a file you might check whether a string contains a substring or use a negative lookahead and an alternation:
^(?!.*(?:tree|car|ship)).*$
^ Assert start of string
(?! negative lookahead, assert what is on the right is not
.*(?:tree|car|ship) Match 0+ times any char except a newline and match either tree car or ship
) Close negative lookahead
.* Match any char except a newline
$ Assert end of string
Regex demo
To not allow a string to have over 3 times a char repeat you could use:
\b(?!(?:\w*(\w)\1){3})\w+\b
\b Word boundary
(?! Negative lookahead, assert what is on the right is not
(?: NOn capturing group
\w*(\w)\1 Match 0+ times a word character followed by capturing a word char in a group followed by a backreference using \1 to that group
){3} Close non capturing group and repeat 3 times
) close negative lookahead
\w+ Match 1+ word characters
\b word boundary
Regex demo
Update
According to this posted answer (which you might add to the question instead) you have 2 patterns that you want to combine but it does not work:
(?=^(?!(?:\w*(.)\1){3}).+$)(?=^(?:(.)(?!(?:.*?\1){4}))*$)
In those 2 patterns you use 2 capturing groups, so the second pattern has to point to the second capturing group \2.
(?=^(?!(?:\w*(.)\1){3}).+$)(?=^(?:(.)(?!(?:.*?\2){4}))*$)
^
Pattern demo
One way to exclude strings that contain words from a given list is to form a pattern with an alternation of the words and use that in a regex, and exclude strings for which it matches.
use warnings;
use strict;
use feature qw(say);
use Path::Tiny;
my $file = shift // die "Usage: $0 file\n"; #/
my #words = split ' ', path($file)->slurp;
my $exclude = join '|', map { quotemeta } #words;
foreach my $string (qw(a1testtre orangesh1 apleship3))
{
if ($string !~ /$exclude/) {
say "OK: $string";
}
}
I use Path::Tiny to read the file into a a string ("slurp"), which is then split by whitespace into words to use for exclusion. The quotemeta escapes non-"word" characters, should any happen in your words, which are then joined by | to form a string with a regex pattern. (With complex patterns use qr.)
This may be possible to tweak and improve, depending on your use cases, for one in regards to the order of of patterns with common parts in alternation.†
The check that successive duplicate characters do not occur more than three times
foreach my $string (qw(adminnisstrator21 kkeeykloakk stack22ooverflow))
{
my #chars_that_repeat = $string =~ /(.)\1+/g;
if (#chars_that_repeat < 3) {
say "OK: $string";
}
}
A long string of repeated chars (aaaa) counts as one instance, due to the + quantifier in regex; if you'd rather count all pairs remove the + and four as will count as two pairs. The same char repeated at various places in the string counts every time, so aaXaa counts as two pairs.
This snippet can be just added to the above program, which is invoked with the name of the file with words to use for exclusion. They both print what is expected from provided samples.
† Consider an example with exclusion-words: so, sole, and solely. If you only need to check whether any one of these matches then you'd want shorter ones first in the alternation
my $exclude = join '|', map { quotemeta } sort { length $a <=> length $b } #words;
#==> so|sole|solely
for a quicker match (so matches all three). This, by all means, appears to be the case here.
But, if you wanted to correctly identify which word matched then you must have longer words first,
solely|sole|so
so that a string solely is correctly matched by its word before it can be "stolen" by so. Then in this case you'd want it the other way round,
sort { length $b <=> length $a }
I hope someone else will come with a better solution, but this seems to do what you want:
\b Match word boundary
(?: Start capture group
(?:([a-z0-9])(?!\1))* Match all characters until it encounters a double
(?:([a-z0-9])\2)+ Match all repeated characters until a different one is reached
){0,2} Match capture group 0 or 2 times
(?:([a-z0-9])(?!\3))+ Match all characters until it encounters a double
\b Match end of word
I changed the [a-z] to also match numbers, since the examples you gave seem to also include numbers. Perl regex also has the \w shorthand, which is equivalent to [A-Za-z0-9_], which could be handy if you want to match any character in a word.
My problem is that i have 2 regex that working:
Not allow over 3 pairs of chars:
(?=^(?!(?:\w*(.)\1){3}).+$)
Not allow over 4 times a char to repeat:
(?=^(?:(.)(?!(?:.*?\1){4}))*$)
Now i want to combine them into one row like:
(?=^(?!(?:\w*(.)\1){3}).+$)(?=^(?:(.)(?!(?:.*?\1){4}))*$)
but its working only the regex that is first and not both of them
As mentioned in comment to #zdim's answer, take it a bit further by making sure that the order in which your words are assembled into the match pattern doesn't trip you. If the words in the file are not very carefully ordered to start, I use a subroutine like this when building the match string:
# Returns a list of alternative match patterns in tight matching order.
# E.g., TRUSTEES before TRUSTEE before TRUST
# TRUSTEES|TRUSTEE|TRUST
sub tight_match_order {
return #_ unless #_ > 1;
my (#alts, #ordered_alts, %alts_seen);
#alts = map { $alts_seen{$_}++ ? () : $_ } #_;
TEST: {
my $alt = shift #alts;
if (grep m#$alt#, #alts) {
push #alts => $alt;
} else {
push #ordered_alts => $alt;
}
redo TEST if #alts;
}
#ordered_alts
}
So following #zdim's answer:
...
my #words = split ' ', path($file)->slurp;
#words = tight_match_order(#words); # add this line
my $exclude = join '|', map { quotemeta } #words;
...
HTH
I am trying to match some strings using a regular expression in PowerShell but due to the differing format of the original string that I'm extracting from, encountering difficulty. I admittedly am not very strong with creating regular expressions.
I need to extract the numbers from each of these strings. These can vary in length but in both cases will be preceded by Foo
PC1-FOO1234567
PC2-FOO1234567/FOO98765
This works for the second example:
'PC2-FOO1234567/FOO98765' -match 'FOO(.*?)\/FOO(.*?)\z'
It lets me access the matched strings using $matches[1] and $matches[2] which is great.
It obviously doesn't work for the first example. I suspect I need some way to match on either / or the end of the string but I'm not sure how to do this and end up with my desired match.
Suggestions?
You may use
'FOO(.*?)(?:/FOO(.*))?$'
It will match FOO, then capture any 0 or more chars as few as possible into Group 1 and then will attempt to optionally match a sequence of patterns: /FOO, any 0 or more chars as many as possible captured into Group 2 and then the end of string position should follow.
See the regex demo
Details
FOO - literal substring
(.*?) - Group 1: any zero or more chars other than newline, as few as possible
(?:/FOO(.*))? - an optional non-capturing group matching 1 or 0 repetitions of:
/FOO - a literal substring
(.*) - Group 2: any 0+ chars other than newline as many as possible (* is greedy)
$ - end of string.
[edit - removed the unneeded pipe to Where-Object. thanks to mklement0 for that! [*grin*]]
this is a somewhat different approach. it splits on the foo, then replaces the unwanted / with nothing, and finally filters out any string that contains letters.
the pure regex solutions others offered will likely be faster, but this may be slightly easier to understand - and therefore to maintain. [grin]
# fake reading in a text file
# in real life, use Get-Content
$InStuff = #'
PC1-FOO1234567
PC2-FOO1234567/FOO98765
'# -split [environment]::NewLine
$InStuff -split 'foo' -replace '/' -notmatch '[a-z]'
output ...
1234567
1234567
98765
To offer a more concise alternative with the -split operator, which obviates the need to access $Matches afterwards to extract the numbers:
PS> 'PC1-FOO1234568', 'PC2-FOO1234567/FOO98765' -split '(?:^PC\d+-|/)FOO' -ne ''
1234568 # single match from 1st input string
1234567 # first of 2 matches from 2nd input string
98765
Note: -split always returns a [string[]] array, even if only 1 string is returned; result strings from multiple input strings are combined into a single, flat array.
^PC\d+-|/ matches PC followed by 1 or more (+) digits (\d) at the start of the string (^) or (|) a / char., which matches both PC2-FOO at the beginning and /FOO.
(?:...), a non-capturing subexpression, must be used to prevent -split from including what the subexpression matched in the results array.
-ne '' filters out the empty elements that result from the input strings starting with a separator.
To learn more about the regex-based -split operator and in what ways it is more powerful than the string literal-based .NET String.Split() method, see this answer.
I'm quite terrible at regexes.
I have a string that may have 1 or more words in it (generally 2 or 3), usually a person name, for example:
$str1 = 'John Smith';
$str2 = 'John Doe';
$str3 = 'David X. Cohen';
$str4 = 'Kim Jong Un';
$str5 = 'Bob';
I'd like to convert each as follows:
$str1 = 'John S.';
$str2 = 'John D.';
$str3 = 'David X. C.';
$str4 = 'Kim J. U.';
$str5 = 'Bob';
My guess is that I should first match the first word, like so:
preg_match( "^([\w\-]+)", $str1, $first_word )
then all the words after the first one... but how do I match those? should I use again preg_match and use offset = 1 in the arguments? but that offset is in characters or bytes right?
Anyway after I matched the words following the first, if the exist, should I do for each of them something like:
$second_word = substr( $following_word, 1 ) . '. ';
Or my approach is completely wrong?
Thanks
ps - it would be a boon if the regex could maintain the whole first two words when the string contain three or more words... (e.g. 'Kim Jong U.').
It can be done in single preg_replace using a regex.
You can search using this regex:
^\w+(?:$| +)(*SKIP)(*F)|(\w)\w+
And replace by:
$1.
RegEx Demo
Code:
$name = preg_replace('/^\w+(?:$| +)(*SKIP)(*F)|(\w)\w+/', '$1.', $name);
Explanation:
(*FAIL) behaves like a failing negative assertion and is a synonym for (?!)
(*SKIP) defines a point beyond which the regex engine is not allowed to backtrack when the subpattern fails later
(*SKIP)(*FAIL) together provide a nice alternative of restriction that you cannot have a variable length lookbehind in above regex.
^\w+(?:$| +)(*SKIP)(*F) matches first word in a name and skips it (does nothing)
(\w)\w+ matches all other words and replaces it with first letter and a dot.
You could use a positive lookbehind assertion.
(?<=\h)([A-Z])\w+
OR
Use this regex if you want to turn Bob F to Bob F.
(?<=\h)([A-Z])\w*(?!\.)
Then replace the matched characters with \1.
DEMO
Code would be like,
preg_replace('~(?<=\h)([A-Z])\w+~', '\1.', $string);
DEMO
(?<=\h)([A-Z]) Captures all the uppercase letters which are preceeded by a horizontal space character.
\w+ matches one or more word characters.
Replace the matched chars with the chars inside the group index 1 \1 plus a dot will give you the desired output.
A simple solution with only look-ahead and word boundary check:
preg_replace('~(?!^)\b(\w)\w+~', '$1.', $string);
(\w)\w+ is a word in the name, with the first character captured
(?!^)\b performs a word boundary check \b, and makes sure the match is not at the start of the string (?!^).
Demo
I have a String variable containing something like ABCD.asd.qwe.com:/dir1.
I want to extract the ABCD portion i.e. the portion from beginning till the first appearance of .. The problem is that there can be almost any characters (only alphanumeric) of any length before the .. So I created this regexp.
if($arg =~ /(.*?\.?)/)
{
my $temp_name = $1;
}
However it is giving me blank string. The logic is that :
.*? - any character non-greedily
\.? - till first or none appearance of .
What could be wrong?
You can instead use negative character class like this
^[^.]+
[^.] would match any character except .
[^.]+ would match 1 to many characters(except .)
^ depicts the start of string
OR
^.+?(?=\.|$)
(?=) is a lookahead which checks for a particular pattern after the current position..So for text abcdad with regex a(?=b) only a would match
$ depicts the end of line(if used with multiline option) or end of string(if used with singleline option)
\.? doesn't mean "till first or none appearance of .". It means "a . here or not".
If the first character of the string is .:
.*? matches 0 chars at position 0.
\.? matches 1 char at position 0.
$1 contains ..
If the first character of the string isn't .:
.*? matches 0 chars at position 0.
\.? matches 0 chars at position 0.
$1 is empty.
To match ABCD, the following would do:
/^(.*?)\./
However, I hate the non-greedy modifier. It's fragile, in the sense that it stops doing what you want if you use two in the same pattern. I'd use the following instead ("match non-periods"):
/^([^.]*)\./
or even just
/^([^.]*)/
use strict;
my $string = "ABCD.asd.qwe.com:/dir1";
$string =~ /([^.]+)/;
my $capture = $1;
print"$capture\n";
OR you can also use Split function like,
my $sub_string = ( split /\./, $string )[0];
print"$sub_string\n";
Note in general: For the explaination of Regex (understanding the complex Regex), take a look at YAPE::Regex::Explain module.
This should work:
if($arg =~ /(.*?)\..+/)
{
my $temp_name = $1;
}
That would match anything before the first . .
You could change the .+ to .* if your input may end after the first ..
You could change the first .*? to .+? if you are sure that there is always at least one character before the first ..
I need to write a Perl regex to match numbers in a word with both letters and numbers.
Example: test123. I want to write a regex that matches only the number part and capture it
I am trying this \S*(\d+)\S* and it captures only the 3 but not 123.
Regex atoms will match as much as they can.
Initially, the first \S* matched "test123", but the regex engine had to backtrack to allow \d+ to match. The result is:
+------------------- Matches "test12"
| +-------------- Matches "3"
| | +--------- Matches ""
| | |
--- --- ---
\S* (\d+) \S*
All you need is:
my ($num) = "test123" =~ /(\d+)/;
It'll try to match at position 0, then position 1, ... until it finds a digit, then it will match as many digits it can.
The * in your regex are greedy, that's why they "eat" also numbers. Exactly what #Marc said, you don't need them.
perl -e '$_ = "qwe123qwe"; s/(\d+)/$numbers=$1/e; print $numbers . "\n";'
"something122320" =~ /(\d+)/ will return 122320; this is probably what you're trying to do ;)
\S matches any non-whitespace characters, including digits. You want \d+:
my ($number) = 'test123' =~ /(\d+)/;
Were it a case where a non-digit was required (say before, per your example), you could use the following non-greedy expressions:
/\w+?(\d+)/ or /\S+?(\d+)/
(The second one is more in tune with your \S* specification.)
Your expression satisfies any condition with one or more digits, and that may be what you want. It could be a string of digits surrounded by spaces (" 123 "), because the border between the last space and the first digit satisfies zero-or-more non-space, same thing is true about the border between the '3' and the following space.
Chances are that you don't need any specification and capturing the first digits in the string is enough. But when it's not, it's good to know how to specify expected patterns.
I think parentheses signify capture groups, which is exactly what you don't want. Remove them. You're looking for /\d+/ or /[0-9]+/