Related
I want to select some string combination (with dots(.)) from a very long string (sql). The full string could be a single line or multiple line with new line separator, and this combination could be in start (at first line) or a next line (new line) or at both place.
I need help in writing a regex for it.
Examples:
String s = I am testing something like test.test.test in sentence.
Expected output: test.test.test
Example2 (real usecase):
UPDATE test.table
SET access = 01
WHERE access IN (
SELECT name FROM project.dataset.tablename WHERE name = 'test' GROUP BY 1 )
Expected output: test.table and project.dataset.tablename
, can I also add some prefix or suffix words or space which should be present where ever this logic gets checked. In above case if its update regex should pick test.table, but if the statement is like select test.table regex should not pick it up this combinations and same applies for suffix.
Example3: This is to illustrate the above theory.
INS INTO test.table
SEL 'abcscsc', wu_id.Item_Nbr ,1
FROM test.table as_t
WHERE as_t.old <> 0 AND as_t.date = 11
AND (as_t.numb IN ('11') )
Expected Output: test.table, test.table (Key words are INTO and FROM)
Things Not Needed in selection:as_t.numb, as_t.old, as_t.date
If I get the regex I can use in program to extract this word.
Note: Before and after string words to the combination could be anything like update, select { or(, so we have to find the occurrence of words which are joined together with .(dot) and all the number of such occurrence.
I tried something like this:
(?<=.)(.?)(?=.)(.?) -: This only selected the word between two .dot and not all.
.(?<=.)(.?)(?=.)(.?). - This everything before and after.
To solve your initial problem, we can just use some negation. Here's the pattern I came up with:
[^\s]+\.[^\s]+
[^ ... ] Means to make a character class including everything except for what's between the brackets. In this case, I put \s in there, which matches any whitespace. So [^\s] matches anything that isn't whitespace.
+ Is a quantifier. It means to find as many of the preceding construct as you can without breaking the match. This would happily match everything that's not whitespace, but I follow it with a \., which matches a literal .. The \ is necessary because . means to match any character in regex, so we need to escape it so it only has its literal meaning. This means there has to be a . in this group of non-whitespace characters.
I end the pattern with another [^\s]+, which matches everything after the . until the next whitespace.
Now, to solve your secondary problem, you want to make this match only work if it is preceded by a given keyword. Luckily, regex has a construct almost specifically for this case. It's called a lookbehind. The syntax is (?<= ... ) where the ... is the pattern you want to look for. Using your example, this will only match after the keywords INTO and FROM:
(?<=(?:INTO|FROM)\s)[^\s]+\.[^\s]+
Here (?:INTO|FROM) means to match either the text INTO or the text FROM. I then specify that it should be followed by a whitespace character with \s. One possible problem here is that it will only match if the keywords are written in all upper case. You can change this behavior by specifying the case insensitive flag i to your regex parser. If your regex parser doesn't have a way to specify flags, you can usually still specify it inline by putting (?i) in front of the pattern, like so:
(?i)(?<=(?:INTO|FROM)\s)[^\s]+\.[^\s]+
If you are new to regex, I highly recommend using the www.regex101.com website to generate regex and learn how it works. Don't forget to check out the code generator part for getting the regex code based on the programming language you are using, that's a cool feature.
For your question, you need a regex that understands any word character \w that matches between 0 and unlimited times, followed by a dot, followed by another series of word character that repeats between 0 and unlimited times.
So here is my solution to your question:
Your regex in JavaScript:
const regex = /([\w][.][\w])+/gm;
in Java:
final String regex = "([\w][.][\w])+";
in Python:
regex = r"([\w][.][\w])+"
in PHP:
$re = '/([\w][.][\w])+/m';
Note that: this solution is written for your use case (to be used for SQL strings), because now if you have something like '.word' or 'word..word', it will still catch it which I assume you don't have a string like that.
See this screenshot for more details
This question already has answers here:
Regular expression to match a line that doesn't contain a word
(34 answers)
Closed 2 years ago.
I know that I can negate group of chars as in [^bar] but I need a regular expression where negation applies to the specific word - so in my example how do I negate an actual bar, and not "any chars in bar"?
A great way to do this is to use negative lookahead:
^(?!.*bar).*$
The negative lookahead construct is the pair of parentheses, with the opening parenthesis followed by a question mark and an exclamation point. Inside the lookahead [is any regex pattern].
Unless performance is of utmost concern, it's often easier just to run your results through a second pass, skipping those that match the words you want to negate.
Regular expressions usually mean you're doing scripting or some sort of low-performance task anyway, so find a solution that is easy to read, easy to understand and easy to maintain.
Solution:
^(?!.*STRING1|.*STRING2|.*STRING3).*$
xxxxxx OK
xxxSTRING1xxx KO (is whether it is desired)
xxxSTRING2xxx KO (is whether it is desired)
xxxSTRING3xxx KO (is whether it is desired)
You could either use a negative look-ahead or look-behind:
^(?!.*?bar).*
^(.(?<!bar))*?$
Or use just basics:
^(?:[^b]+|b(?:$|[^a]|a(?:$|[^r])))*$
These all match anything that does not contain bar.
The following regex will do what you want (as long as negative lookbehinds and lookaheads are supported), matching things properly; the only problem is that it matches individual characters (i.e. each match is a single character rather than all characters between two consecutive "bar"s), possibly resulting in a potential for high overhead if you're working with very long strings.
b(?!ar)|(?<!b)a|a(?!r)|(?<!ba)r|[^bar]
I came across this forum thread while trying to identify a regex for the following English statement:
Given an input string, match everything unless this input string is exactly 'bar'; for example I want to match 'barrier' and 'disbar' as well as 'foo'.
Here's the regex I came up with
^(bar.+|(?!bar).*)$
My English translation of the regex is "match the string if it starts with 'bar' and it has at least one other character, or if the string does not start with 'bar'.
The accepted answer is nice but is really a work-around for the lack of a simple sub-expression negation operator in regexes. This is why grep --invert-match exits. So in *nixes, you can accomplish the desired result using pipes and a second regex.
grep 'something I want' | grep --invert-match 'but not these ones'
Still a workaround, but maybe easier to remember.
If it's truly a word, bar that you don't want to match, then:
^(?!.*\bbar\b).*$
The above will match any string that does not contain bar that is on a word boundary, that is to say, separated from non-word characters. However, the period/dot (.) used in the above pattern will not match newline characters unless the correct regex flag is used:
^(?s)(?!.*\bbar\b).*$
Alternatively:
^(?!.*\bbar\b)[\s\S]*$
Instead of using any special flag, we are looking for any character that is either white space or non-white space. That should cover every character.
But what if we would like to match words that might contain bar, but just not the specific word bar?
(?!\bbar\b)\b\[A-Za-z-]*bar[a-z-]*\b
(?!\bbar\b) Assert that the next input is not bar on a word boundary.
\b\[A-Za-z-]*bar[a-z-]*\b Matches any word on a word boundary that contains bar.
See Regex Demo
Extracted from this comment by bkDJ:
^(?!bar$).*
The nice property of this solution is that it's possible to clearly negate (exclude) multiple words:
^(?!bar$|foo$|banana$).*
I wish to complement the accepted answer and contribute to the discussion with my late answer.
#ChrisVanOpstal shared this regex tutorial which is a great resource for learning regex.
However, it was really time consuming to read through.
I made a cheatsheet for mnemonic convenience.
This reference is based on the braces [], (), and {} leading each class, and I find it easy to recall.
Regex = {
'single_character': ['[]', '.', {'negate':'^'}],
'capturing_group' : ['()', '|', '\\', 'backreferences and named group'],
'repetition' : ['{}', '*', '+', '?', 'greedy v.s. lazy'],
'anchor' : ['^', '\b', '$'],
'non_printable' : ['\n', '\t', '\r', '\f', '\v'],
'shorthand' : ['\d', '\w', '\s'],
}
Just thought of something else that could be done. It's very different from my first answer, as it doesn't use regular expressions, so I decided to make a second answer post.
Use your language of choice's split() method equivalent on the string with the word to negate as the argument for what to split on. An example using Python:
>>> text = 'barbarasdbarbar 1234egb ar bar32 sdfbaraadf'
>>> text.split('bar')
['', '', 'asd', '', ' 1234egb ar ', '32 sdf', 'aadf']
The nice thing about doing it this way, in Python at least (I don't remember if the functionality would be the same in, say, Visual Basic or Java), is that it lets you know indirectly when "bar" was repeated in the string due to the fact that the empty strings between "bar"s are included in the list of results (though the empty string at the beginning is due to there being a "bar" at the beginning of the string). If you don't want that, you can simply remove the empty strings from the list.
I had a list of file names, and I wanted to exclude certain ones, with this sort of behavior (Ruby):
files = [
'mydir/states.rb', # don't match these
'countries.rb',
'mydir/states_bkp.rb', # match these
'mydir/city_states.rb'
]
excluded = ['states', 'countries']
# set my_rgx here
result = WankyAPI.filter(files, my_rgx) # I didn't write WankyAPI...
assert result == ['mydir/city_states.rb', 'mydir/states_bkp.rb']
Here's my solution:
excluded_rgx = excluded.map{|e| e+'\.'}.join('|')
my_rgx = /(^|\/)((?!#{excluded_rgx})[^\.\/]*)\.rb$/
My assumptions for this application:
The string to be excluded is at the beginning of the input, or immediately following a slash.
The permitted strings end with .rb.
Permitted filenames don't have a . character before the .rb.
I am trying to write a regex that matches only strings like this:
89-72
10-123
109-12
122-311(a)
22-311(a)(1)(d)(4)
These strings are embedded in sentences and sometimes there are 2 potential matches in the sentence like this:
In section 10-123 which references section 122-311(a) there is a phone number 456-234-2222
I do not want to match the phone. Here is my current working regex
\d{2,3}\-\d{2,3}(\([a-zA-Z0-9]\))*
see DEMO
I've been looking on Stack and have not found anything yet. Any help would be appreciated. Will be using this in a google sheet and potentially postgres.
Based on regex, suggested by #Wiktor Stribiżew:
=REGEXEXTRACT(A1,REPT("\b(\d{2,3}-\d{2,3}\b(?:\([A-Za-z0-9]\))*)(?:[^-]|$)(?:.*)",LEN(REGEXREPLACE(REGEXREPLACE(A1,"\b(\d{2,3}-\d{2,3}\b(?:\([A-Za-z0-9]\))*)(?:[^-]|$)", char (9)),"[^"&char(9)&"]",""))))
The formula will return all matches.
String:
A
In 22-311(a)(1)(d)(4) section 10-123 which ... 122-311(a) ... number 456-234-2222
Output:
B C D
22-311(a)(1)(d)(4) 10-123 122-311(a)
Solution
To extract all matches from a string, use this pattern:
=REGEXEXTRACT(A1,
REPT(basic_regex & "(?:.*)",
LEN(REGEXREPLACE(REGEXREPLACE(A1,basic_regex, char (9)),"[^"&char(9)&"]",""))))
The tail of a function:
LEN(REGEXREPLACE(REGEXREPLACE(A1,basic_regex, char (9)),"[^"&char(9)&"]","")))
is just for finding number 3 -- how many entries of a pattern in a string.
To not match the phone number you have to indicate that the match must neither be preceded nor followed by \d or -. Google spreadsheet uses RE2 which does not support look around assertion (see the list of supported feature) so as far as I can tell, the only solution is to add a character before and after the match, or the string boundary:
(?:^|[^-\d])\d{2,3}\-\d{2,3}(\([a-zA-Z0-9]\))*(?:$|[^-\d])
(?:^|[^-\d]) means either the start of a line (^) or a character that is not - or \d (you might want to change that, and forbid all letters as well). $ is the end of a line. ^ and $ only do what you want with the /m flag though
As you can see here this finds the correct strings, but with additional spaces around some of the matches.
Is there a simple way to ignore the white space in a target string when searching for matches using a regular expression pattern? For example, if my search is for "cats", I would want "c ats" or "ca ts" to match. I can't strip out the whitespace beforehand because I need to find the begin and end index of the match (including any whitespace) in order to highlight that match and any whitespace needs to be there for formatting purposes.
You can stick optional whitespace characters \s* in between every other character in your regex. Although granted, it will get a bit lengthy.
/cats/ -> /c\s*a\s*t\s*s/
While the accepted answer is technically correct, a more practical approach, if possible, is to just strip whitespace out of both the regular expression and the search string.
If you want to search for "my cats", instead of:
myString.match(/m\s*y\s*c\s*a\*st\s*s\s*/g)
Just do:
myString.replace(/\s*/g,"").match(/mycats/g)
Warning: You can't automate this on the regular expression by just replacing all spaces with empty strings because they may occur in a negation or otherwise make your regular expression invalid.
Addressing Steven's comment to Sam Dufel's answer
Thanks, sounds like that's the way to go. But I just realized that I only want the optional whitespace characters if they follow a newline. So for example, "c\n ats" or "ca\n ts" should match. But wouldn't want "c ats" to match if there is no newline. Any ideas on how that might be done?
This should do the trick:
/c(?:\n\s*)?a(?:\n\s*)?t(?:\n\s*)?s/
See this page for all the different variations of 'cats' that this matches.
You can also solve this using conditionals, but they are not supported in the javascript flavor of regex.
You could put \s* inbetween every character in your search string so if you were looking for cat you would use c\s*a\s*t\s*s\s*s
It's long but you could build the string dynamically of course.
You can see it working here: http://www.rubular.com/r/zzWwvppSpE
If you only want to allow spaces, then
\bc *a *t *s\b
should do it. To also allow tabs, use
\bc[ \t]*a[ \t]*t[ \t]*s\b
Remove the \b anchors if you also want to find cats within words like bobcats or catsup.
This approach can be used to automate this
(the following exemplary solution is in python, although obviously it can be ported to any language):
you can strip the whitespace beforehand AND save the positions of non-whitespace characters so you can use them later to find out the matched string boundary positions in the original string like the following:
def regex_search_ignore_space(regex, string):
no_spaces = ''
char_positions = []
for pos, char in enumerate(string):
if re.match(r'\S', char): # upper \S matches non-whitespace chars
no_spaces += char
char_positions.append(pos)
match = re.search(regex, no_spaces)
if not match:
return match
# match.start() and match.end() are indices of start and end
# of the found string in the spaceless string
# (as we have searched in it).
start = char_positions[match.start()] # in the original string
end = char_positions[match.end()] # in the original string
matched_string = string[start:end] # see
# the match WITH spaces is returned.
return matched_string
with_spaces = 'a li on and a cat'
print(regex_search_ignore_space('lion', with_spaces))
# prints 'li on'
If you want to go further you can construct the match object and return it instead, so the use of this helper will be more handy.
And the performance of this function can of course also be optimized, this example is just to show the path to a solution.
The accepted answer will not work if and when you are passing a dynamic value (such as "current value" in an array loop) as the regex test value. You would not be able to input the optional white spaces without getting some really ugly regex.
Konrad Hoffner's solution is therefore better in such cases as it will strip both the regest and test string of whitespace. The test will be conducted as though both have no whitespace.
This question already has answers here:
Regular expression to match a line that doesn't contain a word
(34 answers)
Closed 2 years ago.
I know that I can negate group of chars as in [^bar] but I need a regular expression where negation applies to the specific word - so in my example how do I negate an actual bar, and not "any chars in bar"?
A great way to do this is to use negative lookahead:
^(?!.*bar).*$
The negative lookahead construct is the pair of parentheses, with the opening parenthesis followed by a question mark and an exclamation point. Inside the lookahead [is any regex pattern].
Unless performance is of utmost concern, it's often easier just to run your results through a second pass, skipping those that match the words you want to negate.
Regular expressions usually mean you're doing scripting or some sort of low-performance task anyway, so find a solution that is easy to read, easy to understand and easy to maintain.
Solution:
^(?!.*STRING1|.*STRING2|.*STRING3).*$
xxxxxx OK
xxxSTRING1xxx KO (is whether it is desired)
xxxSTRING2xxx KO (is whether it is desired)
xxxSTRING3xxx KO (is whether it is desired)
You could either use a negative look-ahead or look-behind:
^(?!.*?bar).*
^(.(?<!bar))*?$
Or use just basics:
^(?:[^b]+|b(?:$|[^a]|a(?:$|[^r])))*$
These all match anything that does not contain bar.
The following regex will do what you want (as long as negative lookbehinds and lookaheads are supported), matching things properly; the only problem is that it matches individual characters (i.e. each match is a single character rather than all characters between two consecutive "bar"s), possibly resulting in a potential for high overhead if you're working with very long strings.
b(?!ar)|(?<!b)a|a(?!r)|(?<!ba)r|[^bar]
I came across this forum thread while trying to identify a regex for the following English statement:
Given an input string, match everything unless this input string is exactly 'bar'; for example I want to match 'barrier' and 'disbar' as well as 'foo'.
Here's the regex I came up with
^(bar.+|(?!bar).*)$
My English translation of the regex is "match the string if it starts with 'bar' and it has at least one other character, or if the string does not start with 'bar'.
The accepted answer is nice but is really a work-around for the lack of a simple sub-expression negation operator in regexes. This is why grep --invert-match exits. So in *nixes, you can accomplish the desired result using pipes and a second regex.
grep 'something I want' | grep --invert-match 'but not these ones'
Still a workaround, but maybe easier to remember.
If it's truly a word, bar that you don't want to match, then:
^(?!.*\bbar\b).*$
The above will match any string that does not contain bar that is on a word boundary, that is to say, separated from non-word characters. However, the period/dot (.) used in the above pattern will not match newline characters unless the correct regex flag is used:
^(?s)(?!.*\bbar\b).*$
Alternatively:
^(?!.*\bbar\b)[\s\S]*$
Instead of using any special flag, we are looking for any character that is either white space or non-white space. That should cover every character.
But what if we would like to match words that might contain bar, but just not the specific word bar?
(?!\bbar\b)\b\[A-Za-z-]*bar[a-z-]*\b
(?!\bbar\b) Assert that the next input is not bar on a word boundary.
\b\[A-Za-z-]*bar[a-z-]*\b Matches any word on a word boundary that contains bar.
See Regex Demo
Extracted from this comment by bkDJ:
^(?!bar$).*
The nice property of this solution is that it's possible to clearly negate (exclude) multiple words:
^(?!bar$|foo$|banana$).*
I wish to complement the accepted answer and contribute to the discussion with my late answer.
#ChrisVanOpstal shared this regex tutorial which is a great resource for learning regex.
However, it was really time consuming to read through.
I made a cheatsheet for mnemonic convenience.
This reference is based on the braces [], (), and {} leading each class, and I find it easy to recall.
Regex = {
'single_character': ['[]', '.', {'negate':'^'}],
'capturing_group' : ['()', '|', '\\', 'backreferences and named group'],
'repetition' : ['{}', '*', '+', '?', 'greedy v.s. lazy'],
'anchor' : ['^', '\b', '$'],
'non_printable' : ['\n', '\t', '\r', '\f', '\v'],
'shorthand' : ['\d', '\w', '\s'],
}
Just thought of something else that could be done. It's very different from my first answer, as it doesn't use regular expressions, so I decided to make a second answer post.
Use your language of choice's split() method equivalent on the string with the word to negate as the argument for what to split on. An example using Python:
>>> text = 'barbarasdbarbar 1234egb ar bar32 sdfbaraadf'
>>> text.split('bar')
['', '', 'asd', '', ' 1234egb ar ', '32 sdf', 'aadf']
The nice thing about doing it this way, in Python at least (I don't remember if the functionality would be the same in, say, Visual Basic or Java), is that it lets you know indirectly when "bar" was repeated in the string due to the fact that the empty strings between "bar"s are included in the list of results (though the empty string at the beginning is due to there being a "bar" at the beginning of the string). If you don't want that, you can simply remove the empty strings from the list.
I had a list of file names, and I wanted to exclude certain ones, with this sort of behavior (Ruby):
files = [
'mydir/states.rb', # don't match these
'countries.rb',
'mydir/states_bkp.rb', # match these
'mydir/city_states.rb'
]
excluded = ['states', 'countries']
# set my_rgx here
result = WankyAPI.filter(files, my_rgx) # I didn't write WankyAPI...
assert result == ['mydir/city_states.rb', 'mydir/states_bkp.rb']
Here's my solution:
excluded_rgx = excluded.map{|e| e+'\.'}.join('|')
my_rgx = /(^|\/)((?!#{excluded_rgx})[^\.\/]*)\.rb$/
My assumptions for this application:
The string to be excluded is at the beginning of the input, or immediately following a slash.
The permitted strings end with .rb.
Permitted filenames don't have a . character before the .rb.