When I tried to run this command:
c:\python27\scripts\pip install nltk-3.2.1-py2.py3-none-any
I am getting the error:
no matching distribution found
Although i have installed nltk from
http://www.lfd.uci.edu/~gohlke/pythonlibs/#nltk
Kindly help.
I am working on Windows 8 64-bit Version
Installing new modules can be a nightmare if you are new to Python.First delete any old versions of NLTK if already installed. Open cmd navigate to C:\Users\user\AppData\Local\Programs\Python\Python35-32\Scripts, the default directory, using the command cd path_name_comes_here. Otherwise goto the path where you have installed python and goto the Scripts subfolder and use this path here onwards. Now the most preferred way is to use pip install module_you_want_to_install for anything in python. Pip automatically fetches everything it needs to install said module.
Simply use pip install nltk.
Another method is to use easy_install requirement_or_URL.
Some rare occasions its best to download the wheel from http://www.lfd.uci.edu/~gohlke/pythonlibs and from there you can simply use pip install downloaded_wheel_name again. But make sure to copy the name of the wheel EXACTLY.
Post installation make sure that your package is accessible from C:\Users\user\AppData\Local\Programs\Python\Python35-32\Lib\site-packages or a similar path depending on where you installed python.
Try Anaconda - Instead . Always works
C:\Users\sanan>conda install -c anaconda nltk
Fetching package metadata .............
Solving package specifications: .
Package plan for installation in environment C:\Users\sanan\Miniconda3:
The following NEW packages will be INSTALLED:
nltk: 3.2.4-py36_0 anaconda
The following packages will be UPDATED:
conda: 4.3.23-py36_0 --> 4.3.25-py36_0 anaconda
The following packages will be SUPERSEDED by a higher-priority channel:
conda-env: 2.6.0-0 --> 2.6.0-0 anaconda
Proceed ([y]/n)? y
conda-env-2.6. 100% |###############################| Time: 0:00:00 22.84 kB/s
nltk-3.2.4-py3 100% |###############################| Time: 0:00:02 774.24 kB/s
conda-4.3.25-p 100% |###############################| Time: 0:00:00 578.90 kB/s
After installation is complete .
import nltk
print(nltk.__version__)
C:\Public\Code\textnorm>python attempt1.py
3.2.4
Related
I removed by mistake /usr/lib64/libpython2.7.so, and as a consequence, yum does not work.
So I'm trying to reinstall python2.7.18 (which is the version that I currently have) from source, but in compilation I get that some modules are missing
Python build finished, but the necessary bits to build these modules were not found:
_bsddb _curses _curses_panel
_ssl _tkinter bsddb185
bz2 dl imageop
readline sunaudiodev
To find the necessary bits, look in setup.py in detect_modules() for the module's name.
But:
yum doesn't work, pip2 also doesn't work, setuptools for python setup.py install is not found...
And all solutions I'm finding involve some of those, so I'm getting into some circular problem here.
I looked for the *.rpm for python 2.7.18 for CentOS 7, in the hope I could just install it with rpm and solve the issue, but I couldn't find it.
Any idea?
Found a solution, starting from here.
After manually rm-ing all the /usr/**/*python2.7* files (probably just the libpython2.7.so* and the python2.7 executables would be enough), from
http://mirror.centos.org/centos/7/os/x86_64/Packages/, I downloaded
bzip2-devel-1.0.6-13.el7.x86_64.rpm
compat-db-4.7.25-28.el7.x86_64.rpm
dlm-devel-4.0.7-1.el7.x86_64.rpm
dlm-lib-4.0.7-1.el7.x86_64.rpm
gdbm-1.10-8.el7.x86_64.rpm
gdbm-devel-1.10-8.el7.x86_64.rpm
keyutils-libs-devel-1.5.8-3.el7.x86_64.rpm
krb5-devel-1.15.1-46.el7.x86_64.rpm
libcom_err-devel-1.42.9-17.el7.x86_64.rpm
libdb-devel-5.3.21-25.el7.x86_64.rpm
libdb-tcl-5.3.21-25.el7.x86_64.rpm
libdb-tcl-devel-5.3.21-25.el7.x86_64.rpm
libselinux-devel-2.5-15.el7.x86_64.rpm
libsepol-devel-2.5-10.el7.x86_64.rpm
libverto-devel-0.2.5-4.el7.x86_64.rpm
ncurses-devel-5.9-14.20130511.el7_4.x86_64.rpm
openssl-devel-1.0.2k-19.el7.x86_64.rpm
pkgconfig-0.27.1-4.el7.x86_64.rpm
python-2.7.5-88.el7.x86_64.rpm
python-devel-2.7.5-88.el7.x86_64.rpm
python-libs-2.7.5-88.el7.x86_64.rpm
python-pycurl-7.19.0-19.el7.x86_64.rpm
sqlite-3.7.17-8.el7_7.1.x86_64.rpm
sqlite-devel-3.7.17-8.el7_7.1.x86_64.rpm
sqlite-tcl-3.7.17-8.el7_7.1.x86_64.rpm
python-setuptools-0.9.8-7.el7.noarch.rpm
python-six-1.9.0-2.el7.noarch.rpm
python-tools-2.7.5-88.el7.x86_64.rpm
python-urlgrabber-3.10-10.el7.noarch.rpm
readline-6.2-11.el7.x86_64.rpm
readline-devel-6.2-11.el7.x86_64.rpm
popt-devel-1.13-16.el7.x86_64.rpm
rpm-4.11.3-43.el7.x86_64.rpm
rpm-apidocs-4.11.3-43.el7.noarch.rpm
rpm-build-4.11.3-43.el7.x86_64.rpm
rpm-build-libs-4.11.3-43.el7.x86_64.rpm
rpm-devel-4.11.3-43.el7.x86_64.rpm
rpmdevtools-8.3-5.el7.noarch.rpm
rpm-libs-4.11.3-43.el7.x86_64.rpm
rpm-python-4.11.3-43.el7.x86_64.rpm
sqlite-3.7.17-8.el7_7.1.x86_64.rpm
sqlite-devel-3.7.17-8.el7_7.1.x86_64.rpm
tcl-devel-8.5.13-8.el7.x86_64.rpm
tix-8.4.3-12.el7.x86_64.rpm
tix-devel-8.4.3-12.el7.x86_64.rpm
tk-devel-8.5.13-6.el7.x86_64.rpm
tkinter-2.7.5-88.el7.x86_64.rpm
yum-3.4.3-167.el7.centos.noarch.rpm
yum-metadata-parser-1.1.4-10.el7.x86_64.rpm
zlib-devel-1.2.7-18.el7.x86_64.rpm
and installed them with sudo rpm -Uvh --replacepkgs --force *.rpm.
Yum works fine now.
I have followed the sample code given in the task-cookbook Ensuring a task is only executed one at a time
That code uses
from djangofeeds.models import Feed
I do not know where to get the djangofeeds module from?
Generally if you want a package, you'd search https://pypi.org/ for it and follow the instructions you find.
In this instance there is a module here; https://github.com/operasoftware/django-feeds
This appears to be the same package. However it doesn't appear to be released to pypi.
So you could download it & add it to your project or install the package from the downloaded archive, instructions for that here; https://packaging.python.org/tutorials/installing-packages/#installing-from-local-archives
djangofeeds' actual package name is django-feeds, not djangofeeds.
Thereby you can install that package with pip install django-feeds.
Just install djangofeed, pip install django-feeds/djangofeeds or pip3 install django-feeds//djangofeeds if you're using python3.
I've read a lot of posts about this but none of the solutions have worked for me. I'm trying to get a module called nsxramlclient installed, shows successful installation with pip but cannot import from any location outside of the /Users/Nathan/Library/Python/2.7/lib/python/site-packages.
Uninstall does work after some fidgeting with brew using the recommendations found with brew doctor. Here are some vitals:
Running OSX python 2.7.10
PIP 18.1
which -a pip = /usr/local/bin/pip
which -a python = shows 2 directories:
/usr/local/bin/python
/usr/bin/python
python -c 'import sys; print(sys.path)'
['', '/usr/local/Cellar/python#2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python27.zip', '/usr/local/Cellar/python#2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python2.7', '/usr/local/Cellar/python#2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-darwin', '/usr/local/Cellar/python#2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-mac', '/usr/local/Cellar/python#2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-mac/lib-scriptpackages', '/usr/local/Cellar/python#2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-tk', '/usr/local/Cellar/python#2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-old', '/usr/local/Cellar/python#2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-dynload']
pip list | grep nsxramlclient
nsxramlclient 2.0.7
It has to be a path issue since I'm able to import it from the directory that the module is located. I just don't know the proper method to repair this since I'm fairly new to Python and I don't want to mess it up worse that it is already.
Looks like I did end up getting it to work finally. What I had to do was to re-install python with brew:
brew re-install python#2
then I needed to re-install the modules I needed with pip. Having OTHER issues now but at least this one is fixed.
hopefully this question fits here, I have tried googling and reading "http://pyqt.sourceforge.net/Docs/PyQt4/installation.html" but unfortunately I'm such a newbie in all things linux that I cannot figure out what applies here...
anyway:
I have a virtual env (in Python 2.7)
I am trying to set up labelImg as instructed in : https://github.com/tzutalin/labelImg, specifically I run (with my virtualenv active):
sudo apt-get install pyqt4-dev-tools
sudo pip install lxml (<- did run this as "pip install lxml")
Then I run into problems with this:
make qt4py2
I got error:
"make: *** No rule to make target 'qt4py2'. Stop."
Now from googling I got the impression that I should be in the same directory as the make file when I run make (is this even true?), but when I try to find where pyqt4 is, I cannot find the folder (it is not in ~/.virtualenvs/virP2/lib/python2.7/site-packages$ (virP2 is the name of the virtualenv)
I have also tried to run (with the virP2 still active)
sudo apt-get install python-qt4
but I got:
"python-qt4 is already the newest version"
and I still cannot find where the directory with qt4 files is. (I also looked into the python2.7 folder outside the virtualenv, but it was not there)
Thanks for any advice!
I installed python 2.7.5 which is working fine.
I then install scrapy (which, I think, uses twisted internally). My scrapy spider is also working fine.
I installed twisted:
sudo apt-get install python-twisted
Then, I created a sample program using Echo Server code shown here
Here is the code
from twisted.internet import protocol, reactor
class Echo(protocol.Protocol):
def dataReceived(self, data):
self.transport.write(data)
class EchoFactory(protocol.Factory):
def buildProtocol(self, addr):
return Echo()
reactor.listenTCP(1234, EchoFactory())
reactor.run()
I try to run this code using this command:
$ python twistedTester.py
Traceback (most recent call last):
File "twistedTester.py", line 1, in <module>
from twisted.internet import protocol, reactor
ImportError: No module named twisted.internet
Can anyone help me with how I can debug why my twisted package is not being picked up by Python installation?
If you use pip just try:
pip install twisted
The same works with w3lib and lxml.
On some *nix systems this might give you a permission error. If that happens, try:
sudo -H pip install twisted
I figured out why this error was happening. For some reason, using apt-get to install a python package was not installing it right.
So, I had to download a tar ball and install the package from them.
I downloaded Twisted tar from here.
I did a tar xjf Twisted-13.1.0.tar.bz2 - this created a directory called Twisted-13.1.0
next, cd Twisted-13.1.0
Finally, python setup.py install
This gave me an error. Twisted required another package called zope.interface. So, I downloaded tar ball for zope.interface from here. Then, ran this command tar xzf zope.interface-3.6.1.tar.gz That created a folder called zope.interface-3.6.1. So, cd into zope.interface-3.6.1 and run python setup.py install
Note: Depending on your user's rights, you may want to do these commands in sudo mode. Just add the keyword sudo before every command.
please rename the file twisted.py to something else. whenever you import a function from a file the interpreter will search for the file in the current location and then it searches in the library. so if you have any file in the name of "twisted.py" you should probably rename it.
after renaming it. dont fail to remove the twisted.pyc file before running it again.
It happened to me too. Finally I figure out that there is a file named twisted.py my present working directory. I removed twisted.py and twisted.pyc. Problem resolved.
Looks like Twisted may have removed the twisted.internet module from the current release. Pinning on the version required by scrapy (17.9.0) worked for me:
$ pip install twisted==17.9.0
Checking if it's installed:
$ python -c "import twisted.internet; print(twisted.internet)"
<module 'twisted.internet' from '/Users/username/dev/env/redacted-ewmlD2h2/lib/python3.7/site-packages/twisted/internet/__init__.py'>
I figured out why apt-get install python-twisted was not enough or "installing it right", as you said, user1700184.
I use Debian Wheezy and Python 2.7.
I just had to move the folder named "twisted" from /usr/lib/python2.7/dist-packages/ to /usr/lib/python2.7/
The same has to be done with the package "zope" and any other one that you do install but is not retrieved when you try run your code.
However, why this is even necessary in my case is still a mystery since my sys.path does include both /usr/lib/python2.7/ and /usr/lib/python2.7/dist-packages, so whatever was under dist-packages should have been retrieved by the interpreter.
I think it is worth noting that if you use sudo to launch python you are using your original default system python. This is NOT the python that your PATH points to. For example if you are using Anaconda and you have updated your path such that which python points to path/to/anaconda/bin/python, sudo which python will still point to usr/bin/python.
So obviously sudo python twistedTester.py will not find the twisted module. To get around this you should explicitly pass the path to the anaconda python. Like so:
sudo path/to/anaconda/bin/python twistedTester.py