I'm trying to fix some conflicts in a merge by git, there are a lot of <<<<<< HEAD and ====== blocks I want to be able to just find and replace with an empty string in a lot of files.
I found this regex pattern that correctly matches everything between the two strings, but it leaves out the beginning and ending strings, and I want to be able to match them also.
(?s)(?<=<<<<<<< HEAD).*?(?=\=\=\=\=\=\=\=)
So, match <<<<<<< HEAD, ======= and everything between them to do a search/replace.
Can anyone help me out? I would be running this on files I'm certain I don't want anything between those strings, I guess that's also why I didn't try a "use theirs" flag when doing the merge, because I need to see the files first.
Just leave out the look-arounds mentioned by Xufox
(?s)(<<<<<<< HEAD)(.*?)(\=\=\=\=\=\=\=)
The .*? is wrapped with parentheses so you can reference it in the replacement. \1 for the first group, \2 for the second, and \3 for everything in between (but the syntax can vary.)
I think you might be asking the wrong question here. The best way to actually handle merge conflicts is with a merge tool. You should look into something like meld. And specifically setting git merge tool to use that. Manual merges are not fun...
Use a pretty ui to analyze the merge instead
You want to match on the opening and closing tags of the conflict sections?
Parentheses are primarily used for group capturing, if you do like so:
(<<<<<<< HEAD)(.*\s)+(\s*=======)
It will create 4 groups which you can access the members.
Tested: http://regexr.com/
Related
As you know, Google links can be pretty unwieldy:
https://www.google.com/search?q=some+search+here&source=hp&newwindow=1&ei=A_23ssOllsUx&oq=some+se....
I have MANY Google links saved that I would like to clean up to make them look like so:
https://www.google.com/search?q=some+search+here
The only issue is that I cannot figure out the correct regex pattern for Vim to do this.
I figure it must be something like this:
:%s/&source=[^&].*//
:%s/&source=[^&].*[^&]//
:%s/&source=.*[^&]//
But none of these are working; they start at &source, and replace until the end of the line.
Also, the search?q=some+search+here can appear anywhere after the .com/, so I cannot rely on it being in the same place every time.
So, what is the correct Vim regex pattern to use in order to clean up these links?
Your example can easily be dealt with by using a very simple pattern:
:%s/&.*
because you want to keep everything that comes before the second parameter, which is marked by the first & in the string.
But, if the q parameter can be anywhere in the query string, as in:
https://www.google.com/search?source=hp&newwindow=1&q=some+search+here&ei=A_23ssOllsUx&oq=some+se....
then no amount of capturing or whatnot will be enough to cover every possible case with a single pattern, let alone a readable one. At this point, scripting is really the only reasonable approach, preferably with a language that understands URLs.
--- EDIT ---
Hmm, scratch that. The following seems to work across the board:
:%s#^\(https://www.google.com/search?\)\(.*\)\(q=.\{-}\)&.*#\1\3
We use # as separator because of the many / in a typical URL.
We capture a first group, up to and including the ? that marks the beginning of the query string.
We match whatever comes between the ? and the first occurrence of q= without capturing it.
We capture a second group, the q parameter, up to and excluding the next &.
We replace the whole thing with the first capture group followed by the second capture group.
I'm trying to see if its possible to extend an existing arbitrary regex by prepending or appending another regex to match within matches.
Take the following example:
The original regex is cat|car|bat so matching output is
cat
car
bat
I want to add to this regex and output only matches that start with 'ca',
cat
car
I specifically don't want to interpret a whole regex, which could be quite a long operation and then change its internal content to match produce the output as in:
^ca[tr]
or run the original regex and then the second one over the results. I'm taking the original regex as an argument in python but want to 'prefilter' the matches by adding the additional code.
This is probably a slight abuse of regex, but I'm still interested if it's possible. I have tried what I know of subgroups and the following examples but they're not giving me what I need.
Things I've tried:
^ca(cat|car|bat)
(?<=ca(cat|car|bat))
(?<=^ca(cat|car|bat))
It may not be possible but I'm interested in what any regex gurus think. I'm also interested if there is some way of doing this positionally if the length of the initial output is known.
A slightly more realistic example of the inital query might be [a-z]{4} but if I create (?<=^ca([a-z]{4})) it matches against 6 letter strings starting with ca, not 4 letter.
Thanks for any solutions and/or opinions on it.
EDIT: See solution including #Nick's contribution below. The tool I was testing this with (exrex) seems to have a slight bug that, following the examples given, would create matches 6 characters long.
You were not far off with what you tried, only you don't need a lookbehind, but rather a lookahead assertion, and a parenthesis was misplaced. The right thing is: Put the original pattern in parentheses, and prepend (?=ca):
(?=ca)(cat|car|bat)
(?=ca)([a-z]{4})
In the second example (without | alternative), the parentheses around the original pattern wouldn't be required.
Ok, thanks to #Armali I've come to the conclusion that (?=ca)(^[a-z]{4}$) works (see https://regexr.com/3f4vo). However, I'm trying this with the great exrex tool to attempt to produce matching strings, and it's producing matches that are 6 characters long rather than 4. This may be a limitation of exrex rather than the regex, which seems to work in other cases.
See #Nick's comment.
I've also raised an issue on the exrex GitHub for this.
I need a help with mass search and replace using regex.
I have a longer strings where I need to look for any number and particular string - e.g. 321BS and I need to replace just the text string that I was looking for. So I need to look for BS in "gf test test2 321BS test" (the pattern is always the same just the position differs) and change just BS.
Can you please help me to find particular regex for this?
Update: I need t keep the number and change just the text string. I will be doing this notepad++. However I need a general funcion for this if possible. I am a rookie in regex. Moreover, is it possible to do it in Trados SDL Studio? Or how am i able to do it in excel file in bulk?
Thank you very much!
Your question is a bit vague, however, as I understand it you want to match any digits followed by BS, ie 123BS. You want to keep 123 but replace BS?
Regex: (\d+)BS matches 123BS
In notepad++ you can:
match (\d+)BS
replace \1NEWTEXT
This will replace 123BS with 123NEWTXT.
\1 will substitue the capture group (\d+). (which matches 1 or more digits.
You could do this in Trados Studio using an app. The SDLXLIFF Toolkit may be the most appropriate for you. The advantage over Notepad++ is that it's controlled and will only affect the translatable text and not anything that might break the integrity of the file if you make a mistake. You can also handle multiple files, or even multiple Trados Studio projects in one go.
The syntax would be very similar to the suggestion above... you would:
match (\d+)BS
replace $1NEWTEXT
I am currently learning regex and I am trying to filter all links (eg: http://www.link.com/folder/file.html) from a document with notepad++. Actually I want to delete everything else so that in the end only the http links are listed.
So far I tried this : http\:\/\/www\.[a-zA-Z0-9\.\/\-]+
This gives me all links which is find, but how do I delete the remaining stuff so that in the end I have a neat list of all links?
If I try to replace it with nothing followed by \1, obviously the link will be deleted, but I want the exact opposite to have everything else deleted.
So it should be something like:
- find a string of numbers, letters and special signs until "http"
- delete what you found
- and keep searching for more numbers, letters ans special signs after "html"
- and delete that again
Any ideas? Thanks so much.
In Notepad++, in the Replace menu (CTRL+H) you can do the following:
Find: .*?(http\:\/\/www\.[a-zA-Z0-9\.\/\-]+)
Replace: $1\n
Options: check the Regular expression and the . matches newline
This will return you with a list of all your links. There are two issues though:
The regex you provided for matching URLs is far from being generic enough to match any URL. If it is working in your case, that's fine, else check this question.
It will leave the text after the last matched URL intact. You have to delete it manually.
The answer made previously by #psxls was a great help for me when I have wanted to perform a similar process.
However, this regex rule was written six years ago now: accordingly, I had to adjust / complete / update it in order it can properly work with the some recent links, because:
a lot of URL are now using HTTPS instead of HTTP protocol
many websites less use www as main subdomain
some links adds punctuation mark (which have to be preserved)
I finally reshuffle the search rule to .*?(https?\:\/\/[a-zA-Z0-9[:punct:]]+) and it worked correctly with the file I had.
Unfortunately, this seemingly simple task is going to be almost impossible to do in notepad++. The regex you would have to construct would be...horrible. It might not even be possible, but if it is, it's not worth it. I pretty much guarantee that.
However, all is not lost. There are other tools more suitable to this problem.
Really what you want is a tool that can search through an input file and print out a list of regex matches. The UNIX utility "grep" will do just that. Don't be scared off because it's a UNIX utility: you can get it for Windows:
http://gnuwin32.sourceforge.net/packages/grep.htm
The grep command line you'll want to use is this:
grep -o 'http:\/\/www.[a-zA-Z0-9./-]\+\?' <filename(s)>
(Where <filename(s)> are the name(s) of the files you want to search for URLs in.)
You might want to shake up your regex a little bit, too. The problems I see with that regex are that it doesn't handle URLs without the 'www' subdomain, and it won't handle secure links (which start with https). Maybe that's what you want, but if not, I would modify it thusly:
grep -o 'https\?:\/\/[a-zA-Z0-9./-]\+\?' <filename(s)>
Here are some things to note about these expressions:
Inside a character group, there's no need to quote metacharacters except for [ and (sometimes) -. I say sometimes because if you put the dash at the end, as I have above, it's no longer interpreted as a range operator.
The grep utility's syntax, annoyingly, is different than most regex implementations in that most of the metacharacters we're familiar with (?, +, etc.) must be escaped to be used, not the other way around. Which is why you see backslashes before the ? and + characters above.
Lastly, the repetition metacharacter in this expression (+) is greedy by default, which could cause problems. I made it lazy by appending a ? to it. The way you have your URL match formulated, it probably wouldn't have caused problems, but if you change your match to, say [^ ] instead of [a-zA-Z0-9./-], you would see URLs on the same line getting combined together.
I did this a different way.
Find everything up to the first/next (https or http) (then everything that comes next) up to (html or htm), then output just the '(https or http)(everything next) then (html or htm)' with a line feed/ carriage return after each.
So:
Find: .*?(https:|http:)(.*?)(html|htm)
Replace with: \1\2\3\r\n
Saves looking for all possible (incl non-generic) url matches.
You will need to manually remove any text after the last matched URL.
Can also be used to create url links:
Find: .*?(https:|http:)(.*?)(html|htm)
Replace: \1\2\3\r\n
or image links (jpg/jpeg/gif):
Find: .*?(https:|http:)(.*?)(jpeg|jpg|gif)
Replace: <img src="\1\2\3">\r\n
I know my answer won't be RegEx related, but here is another efficient way to get lines containing URLs.
This won't remove text around links like Toto mentioned in comments.
At least if there is nice pattern to all links, like https://.
CTRL+F => change tab to Mark
Insert https://
Tick Mark to bookmark.
Mark All.
Find => Bookmarks => Delete all lines without bookmark.
I hope someone who lands here in search of same problem will find my way more user-friendly.
You can still use RegEx to mark lines :)
I am working with legacy systems at the moment, and a lot of work involves breaking up delimited strings and testing against certain rules.
With this string, how could I return "Active" in a back reference and search terms, stopping when it hits the first caret (^)?:
Active^20080505^900^LT^100
Can it be done with an inclusion in the regex of this "(.+)" ? The reason I ask is that the actual regex "(.+)" is defined in a database as cutting up these messages and their associated rules can be set from a front-end system. The content could be anything ('Active' in this case), that's why ".+" has been used in this case.
Rule: The caret sign cannot feature between the brackets, as that would result with it being stored in the database field too, and it is defined elsewhere in another system field.
If you have a better suggestion than "(.+)" will be happy to hear it.
Thanks in advance.
(.+?)\^
Should grab up to the first ^
If you have to include (.+) w/o modifications you could use this:
(.+?)\^(.+)
The first backreference will still be the correct one and you can ignore the second.
A regex is really overkill here.
Just take the first n characters of the string where n is the position of the first caret.
Pseudo code:
InputString.Left(InputString.IndexOf("^"))
^([^\^]+)
That should work if your RE library doesn't support non-greediness.