The feature file is as below which is included Chinese:
Feature: Splash feature
Scenario: As a user I can know the introduction of the app
Given I wait for the view with id "introduce" to appear
When I drag from 0:600 to 700:600 moving with 5 steps
And I swipe right
And I swipe right
Then I see "开始使用"
When execute command calabash-android run app-dev-debug.apk. It occurs crash.
What's the problem and how to solve it?
I have tried chcp 65001 and 936. That is not OK.
My env is as below:
Win7 GBK version
ruby 2.2.4p230
calabash-android 0.7.3
cucumber 2.3.3
Related
I am using WebStorm 2017.1.3 on Fedora 25.
I have fish set up as my default shell and installed oh-my-fish so in
Terminal I see my git branch and other information by default. omf update runs as expected.
In the WebStorm terminal emulator I still get fish, but not omf:
user#host ~> omf
fish: omf: command not found...
I'm a noob fish and omf user, can anyone help?
Thanks.
I have fish set up as my default shell and installed oh-my-fish so in Terminal I see my git branch and other information by default.
Note that you don't need omf for this. Fish ships a number of prompts that include vcs information. You can pick one with fish_config or add the __fish_vcs_prompt function to your fish_prompt.
In the WebStorm terminal emulator I still get fish, but not omf:
user#host ~> omf
fish: omf: command not found...
The "omf" function is stored in a file named "omf.fish" in a directory in $fish_function_path. This means that directory isn't included there.
The way omf works in a reasonably current (> 2.3.0) fish is that it has a bootstrap file (~/.config/fish/conf.d/omf.fish) that then sources the rest. It seems this isn't run.
I'd suggest you compare the values of $fish_function_path, $OMF_PATH and possibly $XDG_DATA_HOME in webstorm and outside of it.
An answer was given here: IntelliJ's embedded terminal does not load fish functions. I.e, add some lines of code to the app for the time being (until Jetbrains makes a fix).
I fixed this by going to Settings | Terminal then turning off Shell integration.
This allowed me to run omf and also have the bobthefish theme work with powerline/nerd fonts (after updating the terminal font at Settings | Editor | Color Scheme | Font Console)
I was using phpStorm 2017.3.4 but I assume this will also work in any IntelliJ embedded terminal.
The problem is that when I'm lauching dev-server through Kubuntu's Konsole app, debug output is colored:
But wher I'm launching it trough built-in "Run" or "Debug" in PyCharm, the output in PyCharm's console is all red:
Is there a way to make output in PyCharm colored? Because I can't find anything related in Settings.
UPD: link to issue on PyCharm issue tracker
As I see some people woting on this question, so here is the link to this issue on PyCharm issue tracker - youtrack.jetbrains.com/issue/PY-19790. If you will vote for this feature, it will be released faster!
Some time ago I wrote a code snippet that does the thing for me. It's not a perfect solution, but does the trick. BSD License
To use it:
Option 1: git clone/download this and import it somewhere (e.g. django development settings). Read the module docstring and the readme for details.
Option 2: include the code snippet below into your django development/debug settings (or anywhere else, where it will be run early). It's automatically verified with SHA-2 against file changes.
try: # Colored logger CaaS. Auto downloaded and verified.
import os
import hashlib
from urllib import request
url, sha256 = "https://lab.it.hs-hannover.de/lukyanch/pydevutils/raw/c531eaf7/colored_logger.py", "083e1a39cfdbe17a7126188b5477fb8f324be8106a39ed4a00faeb3f18c5aedc"
cached_file = "/tmp/{0}.py".format(sha256)
code = bool(os.path.exists(cached_file) or [request.urlretrieve(url, cached_file), print("Downloaded: " + url)]) and open(cached_file, "r").read()
assert hashlib.sha256(code.encode()).hexdigest() == sha256, os.remove(cached_file) or "Bad content: " + cached_file
exec(code)
except Exception as e:
print("No colored logger: {e.__class__.__name__}: {e}".format(e=e))
"grep console" is the plugin which handles this perfectly:
https://plugins.jetbrains.com/plugin/7125-grep-console
This is because the development console for PyCharm is not using the same kind of standards to display colors as your normal shell terminal (they are two very different things).
The output console for PyCharm is just a display of commands (its not a full shell with all the bells and whistles of your local terminal emulator).
You can embed a terminal into PyCharm (see the documentation on how to set it up) but doing so will not allow you to redirect the output of the built-in run commands to the terminal window. It will enable you to run arbitrary shell commands there, and avoid having to switch over to a terminal console.
Keep in mind if you have any special shell customization or fonts/glyphs these may not appear correctly in the embedded terminal, because it is using a different set of fonts and configuration.
You can try and raise this as an enhancement at the PyCharm bug tracker; if it gets enough votes it may make it in to the next release.
How can I start the wamp server on windows 7 using wamp version 2.4?
Following is the error message I get:
The configuration file contains a syntax error on line 24:
[EParseError][config] section directive "ImageList" already specified.
Error:
The configuration file contains a syntax error on line 7;
[EParseError] No tray icon was specified. Please assign a tray icon by
using on the of the Tray icon directives in the [Config] section.
Caused by:
Computer abruptly shutting down while server is running
Fix:
• Go to the wamp/scripts folder
• Open console/cmd as admin
• run: php refresh.php
• Done!
Make sure you have php in your system environment settings
then go to the wamp/scripts folder
open console
run:
php refresh.php
answer from here solved my issue, referenced above info from this stack answer
ISSUE
You have a duplicate entry on C:\wamp\wampmanager.ini
ImageList=images_off.bmp or something like that.
FIX
Remove one of them (probably line 24)
It sounds like you have been playing with \wamp\wampmanager.tpl
Never play with wampmanager.tpl unless you have taken a copy first!
WAMPServer rebuilds \wamp\wampmanager.ini using a script that uses \wamp\wampmanager.tpl among other files as input, each time you start WAMPServer or when you use the wampmanager menus and click refresh.
So to fix your problem edit of wampmanager.tpl to remove the duplicated line and then do:
rightclick wampmanager icon -> refresh
Or just exit wampmanager and restart it.
to rebuild the \wamp\wampmanager.ini file
Take a backup of your Wampmanager.ini file in your wamp installation directory (in my case it is c:\Wamp64). Then rename it or move it to some other folder.
Get the wampmanager.ini from a new installation or any similar installation if you already have, then paste it in the same path. It will work like charm. This may change any of the settings you had earlier but it will make your wamp working without reinstalling it.
Wamp Manager folder
Wamp Manager configuration file in CMD prompt
It is interesting that this error shows up after initial install of the current version 3.2.6 found on aviatechno (without being able to tamper with any installed configuration file, the .ini in the installation is broken). It reports an error with line 27: WAMPMARIADBOFF.
[Services]
Name: APACHESERVICE
WAMPMARIADBOFFName: MARIADBSERVICE
WAMPMYSQLOFFName: MYSQLSERVICE
Use the new ini repair tool you can find on the aviatechno website
which corrects the lines in the ini file as:
[Services]
Name: wampapache
Name: wampmysqld
Name: wampmariadb
...
Action: service; Service: wampapache; ServiceAction: startresume; Flags: ignoreerrors
Action: service; Service: wampmysqld; ServiceAction: startresume; Flags: ignoreerrors
Action: service; Service: wampmariadb; ServiceAction: startresume; Flags: ignoreerrors
Only do this on new installs
Even after that wampserver does not start or does not start the services. To repair: stop the background process AeTrayMenu, head over to the folder c:\wamp64 removing its content and reinstall.
This did the trick for me.
I just installed RubyMotion on my iMac.
I created my first app - Hello
This is the code:
class AppDelegate
def application(application, didFinishLaunchingWithOptions:launchOptions)
#window = UIWindow.alloc.initWithFrame(UIScreen.mainScreen.bounds)
#window.rootViewController = HelloViewController.alloc.init
#window.rootViewController.wantsFullScreenLayout = true
#window.makeKeyAndVisible
true
end
end
I run $ Rake and the IOS Simulator start up. And I get this error:
2014-04-25 18:58:03.157 Hello[10488:70b] Cannot find executable for CFBundle 0x8d8a130 </Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator7.1.sdk/System/Library/AccessibilityBundles/CertUIFramework.axbundle> (not loaded)
I tried this from another question:
Temporary workaround: click iOS Simulator > Reset Content and Settings... and run again.
But, that didn't fix it.
Thanks for the help!
It's a relatively harmless (I believe) bug in the iOS 7 SDK.
https://devforums.apple.com/message/940094#940094
I had the same issue and found your post when searching for a solution. My application appeared to be running fine but I was still getting this message I was able to eliminate the message on my machine, here is what I had to do;
Stop all execution on the simulator.
Go to the simulator's home screen using shift-command-h.
Delete the app from the simulator device by holding a click on my program until the delete icon appeared, then click the X to delete.
In the iOS Simulator select Reset Content and Settings.
Clean the project in Xcode, shift-command-k.
Build it and run it.
Note, I was doing steps 4 & 5 but that wasn't working. It wasn't until I added step 3 (as crazy as it sounds) that it cleared my message.
Hope this works for you!
--Dave
Perhaps deleting the app, resetting, and restarting the iOS simulator would work.
Hey guys I really need help.
I have recently started programming C++ again and I am trying to get Code Blocks up and running but it keeps failing because of this error.
"ERROR: You need to specify a debugger program in the debuggers's settings."
Understandably this means there isn't a debugger program so I have to download one. I tried to find the gdb.exe for MinGW but I can't find it at all. I just end up with the MinGW's Installation Manager and being left confused.
Are there any tutorials about using the MinGW written for beginners or anyone willing to help?
Thanks in advance.
Steps to add gdb.exe
Open MinGW Installation Manager
select package "mingw32-gdb" from the list.
Then select "Apply Changes" in Installation menu.
This will automatically install gdb.exe in the path C:\MinGW\bin.
Please let me suggest you debugger program TDM-GCC. For download and install visit
http://wiki.codeblocks.org/index.php?title=MinGW_installation
Because a debugger program (toolchain) is very complex undertaking, is not standard in Code::Blocks. You must download it and install on Code::Blocks.
Note: It is impossible copy and paste images here. In the case linked page changes, I, or another one, should suggest new link.
However following are instructions according to images and my experience.
Download TDM-GCC from https://jmeubank.github.io/tdm-gcc/download/ click [tdm64-gcc-10.3.0-2.exe] and run it.
In Wizard Action window - Click [Create].
In Select Edition window - If MinGW/TDM (32-bit) is not checked, check it. Click [Next>].
In Licence Changes window - Click [Next>].
In New Instalation: Instalation Directory window - If text box is "C:\TDM-GCC-32", it's okay. If is not, click [Browse ...], and navigate: C:\ > TDM-GCC-32 > click [OK]. Now text box is C:\TDM-GCC-32. Click [Next>].
If a small window appears saying The directory TDM-GCC-32 is not empty! Are you sure you want to install here?. Click [Yes].
In New Installation: Download Mirror window - Click [Next>].
In New Installation: Choose Components window - Check whether Add to PATH box is checked. Actually is checked. Click [Install].
In Installing window - Wait till [Next] become black. Then click it. Even if Instalation Failed window appears click [Next].
In Completing the TDM-GCC Setup Wizard window - Click [Finish].
Go to Code Blocks > Settings > Compiler.
10a. In Global compiler settings window click "Toolchain executables". Just below, find "Compiler's installation directory". If the below text field is C:\TDM-GCC-32, it's okay. If not, click the [...] at the end of the field. In "Select directory" wizard, navigate to C:\TDM-GCC-32. Now "Folder:" should be TDM-GCC-32. Click [Select a folder] in "Select directory" wizard.
10b. In Global compiler settings. Below red "Note:..." find "Program Files" > "Debuger". If text field reads "GDB/CDB debuger : Default", it's okay, click [OK]. If not, click the down arrow at the end of the field > choose "GDB/CDB debuger : Default". Check that text field is "GDB/CDB debuger : Default". Click [OK].
Go to Code Blocks > Settings > Debugger... . In Common window, left list, click "Default". If "Executable path:"'s text field is "C:\TDM-GCC-32\bin\gdb32.exe", it's okay, click [OK]. If not, click [...] button and navigate C: > TDM-GCC-32 > bin > click gdb32 (or gdb32.exe) file > click [open] in "Select executable file" wizard. "Executable path:" should be C:\TDM-GCC-32\bin\gdb32.exe. Click [OK]. Now you can debug your program.
If Debugger does not function, close Code Blocks and restart them.
Regards.
Hey guys I suggest a better way. Download "gdb.exe" from the Internet and copy it to the below path.
C:\MinGW\Bin
It's really works. I did it.