I'm trying to create a generic make file so that I can compile my project independently of how many files I add to it and where I decide to put them in the project tree.
In my step by step approach I cam to this makefile which works fine.
CC=g++
OBJECTS=main.o board.o
VPATH=src:\
src/board:\
include/board:\
build:\
bin
boardG : main.o board.o
$(CC) -o bin/boardG build/main.o build/board.o
main.o : main.cpp board.hpp
$(CC) -c -I include $< -o build/$#
board.o : board.cpp board.hpp
$(CC) -c -I include $< -o build/$#
This version will do the job just fine. See output below:
me#01:~/code/projects/boardG$ make
g++ -c -I include src/main.cpp -o build/main.o
g++ -c -I include src/board/board.cpp -o build/board.o
g++ -o bin/boardG build/main.o build/board.o
The problem here is that I will have to create one rule for each .cpp file. Which is precisely what I try to avoid. Hence I tried to adapt the version above using matching patterns like this:
CC=g++
OBJECTS=main.o board.o
VPATH=src:\
src/board:\
include/board:\
build:\
bin
boardG : main.o board.o
$(CC) -o bin/boardG build/main.o build/board.o
%.o : %.cpp %.hpp
$(CC) -c -I include $< -o build/$#
When I run make now I get the follwing output:
me#01:~/code/projects/boardG$ make
g++ -c -o main.o src/main.cpp
src/main.cpp:2:27: fatal error: board/board.hpp: No such file or directory
compilation terminated.
<builtin>: recipe for target 'main.o' failed
make: *** [main.o] Error 1
My project has the follwing structure/files in it.
./bin/
./build/
./include/board/board.hpp
./src/main.cpp
./src/board/board.cpp
./makefile
I'm wondering why make would change the command when using pattern matching? Or, and probably more accurately, what am I doing wrong that makes make fail?
Just avoid using VPATH when it comes to object files. What's happening is that make is actually using the built-in rule for %.o and not using your rule at all.
If you prefix all your objects with the directory, this should work:
CC=g++
OBJDIR = build
OBJECTS = $(OBJDIR)/main.o $(OBJDIR)/board.o
VPATH = src:\
src/board:\
include/board:\
bin/boardG : $(OBJECTS)
$(CC) -o $# $^
$(OBJDIR)/%.o : %.cpp %.hpp
$(CC) -c -I include $< -o $#
Here is a helpful resource, which more or less exactly describes the problem you've run into.
Related
I have a project that I want to build a shared library for it. The following Makefile works:
libfastpd.so: fastpd.cpp
$(CXX) -std=c++11 -fPIC -c fastpd.cpp -o fastpd.o
$(CXX) -std=c++11 -fPIC -c graph.cpp -o graph.o
$(CXX) -std=c++11 -fPIC -c LinkedBlockList.cpp -o LinkedBlockList.o
$(CXX) -std=c++11 -fPIC -c maxflow.cpp -o maxflow.o
$(CXX) -std=c++11 -shared -Wl,-soname,libfastpd.so -o libfastpd.so fastpd.o graph.o LinkedBlockList.o maxflow.o
clean:
rm *.o *.so
Then I came across this recipe in Cogswell et al.'s C++ Cookbook: https://www.oreilly.com/library/view/c-cookbook/0596007612/ch01s18.html
and decided to improve my Makefile based on that:
# Specify extensions of files to delete when cleaning
CLEANEXTS = o so
# Specify the source files, the target files,
# and the install directory
SOURCES = fastpd.cpp graph.cpp LinkedBlockList.cpp maxflow.cpp
OUTPUTFILE = libfastpd.so
INSTALLDIR = ./
.PHONY: all
all: $(OUTPUTFILE)
# Build lib*.so from all the *.o;
# subst is the search-and-replace
# function demonstrated in Recipe 1.16
$(OUTPUTFILE): $(subst .cpp,.o,$(SOURCES))
$(CXX) -shared -fPIC $(LDFLAGS) -o $# $^
.PHONY: install
install:
mkdir -p $(INSTALLDIR)
cp -p $(OUTPUTFILE) $(INSTALLDIR)
.PHONY: clean
clean:
for file in $(CLEANEXTS); do rm -f *.$$file; done
# Generate dependencies of .ccp files on .hpp files
include $(subst .cpp,.d,$(SOURCES))
%.d: %.cpp
$(CC) -M $(CPPFLAGS) $< > $#.$$$$; \
sed 's,\($*\)\.o[ :]*,\1.o $# : ,g' < $#.$$$$ > $#; \
rm -f $#.$$$$
Running this file I obtained the following error:
/usr/bin/ld: fastpd.o: relocation R_X86_64_32 against `.rodata' can
not be used when making a shared object; recompile with -fPIC
fastpd.o: error adding symbols: Bad value
Checking the terminal output, I observed that the following commands were executed:
g++ -c -o fastpd.o fastpd.cpp
g++ -c -o graph.o graph.cpp
g++ -c -o LinkedBlockList.o LinkedBlockList.cpp
g++ -c -o maxflow.o maxflow.cpp
No -fPIC!
My question is: Which lines of the Makefile execute these commands and how to add -fPIC to them?
Any references to good ressources to understand the entire Makefile above would be very much appreciated as well!
Thank you very much in advance for your help!
Which lines of the Makefile execute these commands... ?
The short answer is none. The rule...
$(OUTPUTFILE): $(subst .cpp,.o,$(SOURCES))
$(CXX) -shared -fPIC $(LDFLAGS) -o $# $^
only specifies the link time dependencies and command. The -fPIC option needs to be specified when you compile the source file but you haven't provided any rule to build a .o from a .cpp so make falls back on its implicit rule which (for the purposes of this example) is essentially...
%.o: %.cpp
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $<
So the obvious solution is to add -fPIC to CXXFLAGS...
CXXFLAGS += -fPIC
I am trying to build a Makefile that will build a shared library with g++ and I find that it is not evaluating the OBJECTS variable. This is on Ubuntu 18.04 and all the files are in the same current directory. Secondly it is completely skipping the source file compilation and proceeding directly to evaluate the linking instruction. As a clarification I am using GNU Make 4.1
Here is what I get when I type make all
g++ -shared -pthread -o tree.so
g++: fatal error: no input files
compilation terminated.
Makefile:12: recipe for target 'tree.so' failed
make: *** [tree.so] Error 1
Here is my Makefile code
CC=g++
CFLAGS = -I/usr/local/include -Wall -std=c++17 -O3 -march=native -Ofast -ftree-vectorize
LIBS=-shared -pthread
SOURCES=$(wildcard *.cpp)
OBJECTS=$(wildcard *.o)
TARGET=tree.so
all:$(TARGET)
$(TARGET) : $(OBJECTS)
$(CC) $(LIBS) -o $(OBJECTS) $(TARGET)
$(OBJECTS):$(SOURCES)
$(CC) -c -g $(CFLAGS) $(SOURCES)
clean:
rm -f $(OBJECTS) $(TARGET)
If you only have the *.cpp files in your directories, then there is not any *.o yet, so your $(wildcard *.o) will expand to nothing.
What you want is to get the *.cpp files and compute the corresponding *.o files:
OBJECTS=$(patsubst %.cpp,%.o,$(SOURCES))
or equivalently:
OBJECTS=$(SOURCES:.cpp=.o)
Now, your compiler command is not the best one, because if you touch any source file all will be compiled. You can use instead:
$(OBJECTS): %.o: %.cpp
$(CC) -c -g $(CFLAGS) $< -o $#
So that only the touched files are actually rebuilt.
Also you have the linking command wrong. It should be:
$(TARGET) : $(OBJECTS)
$(CC) $(LIBS) -o $(TARGET) $(OBJECTS)
because the argument to the -o option is the output file, that is the target.
I have seen questions like these on SO but everyone has different answers and directory structures that aren't working for me.
My makefile:
CC = g++
DEBUG = -g -std=c++11
TARGET = main
OBJECT_FILES = BingResultSet.o main.o
INC_PATH = -I HTTPClientLib/include
LIB_PATH = -L HTTPClientLib/lib/
start: clean BingResultSet.o main.o
$(CC) $(DEBUG) $(INC_PATH) $(LIB_PATH) $(OBJECT_FILES) -o $(TARGET)
rm -f *.o
BingResultSet.o: BingResultSet.cpp BingResultSet.h
$(CC) $(DEBUG) $(INC_PATH) $(LIB_PATH) -c BingResultSet.cpp
main.o: main.cpp
$(CC) $(DEBUG) $(INC_PATH) $(LIB_PATH) -c main.cpp
clean:
rm -f $(OBJECT_FILES) $(TARGET)
My file structure:
/Desktop/DataMiner/.cpp, .h, and makefile
/Desktop/DataMiner/HTTPClientLib/include/HTTPClient.h
/Desktop/DataMiner/HTTPClientLib/lib/HTTPClient.a
What's the correct way to link my static lib in my makefile?
Here's my $0.02:
there was no static library involved. Assuming you meant the .o files
you mix dependencies and build rules, instead, avoid repeating build rules:
$(TARGET): $(OBJECT_FILES)
$(CXX) $(DEBUG) $(INC_PATH) $^ -o $# $(LIB_PATH)
%.o: %.cpp
$(CXX) $(DEBUG) $(INC_PATH) -c $< -o $#
You used CC for a C++ compiler. That's strange. Use CXX
You used LDFLAGS when you were just compiling
You hardcoded the source and destination paths. Instead use the automatic variables ($^, $< for source; $# for destination)
You tried to hardcode header dependencies. That's error-prone and messes up source specification (you don't want $^ to list .h files in your command line...). Instead, use gcc -MM¹ to generate the dependencies for you!
Next, do a conditional include of those dependencies:
.depends:
$(CXX) -MM $(CXXFLAGS) -c *.cpp > $#
-include .depends
It's usually handy to keep the .o files so you can speed up builds. Of course, this was not a good plan until you generated the header dependencies automatically. If you insist, you can comment the .PRECIOUS target. Intermediate targets are automatically deleted by GNU Make
Here's the integrated offering I ended up with:
CXX = g++
TARGET = main
OBJECT_FILES = BingResultSet.o main.o
INC_PATH = -I HTTPClientLib/include
LIB_PATH = -L HTTPClientLib/lib/
CPPFLAGS = -g -std=c++11
CPPFLAGS+= $(INC_PATH)
# standard derived flags:
CXXFLAGS+=$(CPPFLAGS)
LDFLAGS+=$(LIB_PATH)
start: .depends $(TARGET)
$(TARGET): $(OBJECT_FILES)
$(CXX) $(CXXFLAGS) $^ -o $# $(LDFLAGS)
%.o: %.cpp
$(CXX) $(CXXFLAGS) -c $< -o $#
clean:
rm -f .depends $(OBJECT_FILES) $(TARGET)
# to keep the .o files:
.PRECIOUS: $(OBJECT_FILES)
.depends:
$(CXX) -MM $(CXXFLAGS) -c *.cpp > $#
-include .depends
On a very simple sample set of files you get:
$ make clean
rm -f .depends BingResultSet.o main.o main
$ make
g++ -MM -g -std=c++11 -I HTTPClientLib/include -c *.cpp > .depends
g++ -I HTTPClientLib/include -c BingResultSet.cpp -o BingResultSet.o
g++ -I HTTPClientLib/include -c main.cpp -o main.o
g++ -I HTTPClientLib/include BingResultSet.o main.o -o main -L HTTPClientLib/lib/
$ cat .depends
BingResultSet.o: BingResultSet.cpp BingResultSet.h
main.o: main.cpp BingResultSet.h
test.o: test.cpp
¹ (or similar, see man-page)
I'm scanning the web and all my project files for solution but still can't find the answer why my linker won't finish the job. Everything smoothly compiles into .o files, but the last make command fails. And here is the Makefile content:
CXX = g++
CXXFLAGS = -Wall -pedantic -c
OBJS = main.o operacje.o porownaj.o
dzialania: $(OBJS)
$(CXX) $^ -o $#
main.o: main.cpp operacje.h porownaj.h
$(CXX) $(CXXFLAGS) $^ -o $#
operacje.o: operacje.cpp operacje.h porownaj.h
$(CXX) $(CXXFLAGS) $^ -o $#
porownaj.o: porownaj.cpp operacje.h porownaj.h
$(CXX) $(CXXFLAGS) $^ -o $#
clean:
rm -f *o
and again, here is the mistake that pops out:
g++ main.o operacje.o porownaj.o -o dzialania
ld: fatal: file main.o: unknown file type
ld: fatal: file processing errors. No output written to dzialania
*** Error code 1
make: Fatal error: Command failed for target `dzialania'
I'm sure it's some kind of a basic mistake but after staring at the file for a few hours I won't notice it anyway. Maybe some of you folks with notice the bug with a fresh eye.
btw. it's my first post after long-term passive lurking, I hope I did everything right. Thanks in advance!
#edit1 OK, I did all the suggested corrections
#edit2 Seems like the problem is caused by improper module division of my program. I'll rearrange it's structure and let you know if it works then. Thanks for all the support!
#edit3 OK, I changed the structure of my program and everything runs smooth, Thanks again!
Try using $< instead of $^ in your rules to compile main.o, operacje.o, and porownaj.o:
main.o: main.cpp operacje.h porownaj.h
$(CXX) $(CXXFLAGS) $< -o $#
operacje.o: operacje.cpp operacje.h porownaj.h
$(CXX) $(CXXFLAGS) $< -o $#
porownaj.o: porownaj.cpp operacje.h porownaj.h
$(CXX) $(CXXFLAGS) $< -o $#
That will cause make to compile only the corresponding .cpp file. When you use $^ the header files are passed to the g++ command which tells the compiler to create precompiled headers for them - that's what's ending up in main.o instead of the object file for main.cpp.
GNU make variable definitions like CC = g++, or CFLAGS = -Wall -pedantic etc.. should each be on its own line:
CC = g++
CFLAGS = -Wall -pedantic
OBJS = main.o operacje.o porownaj.o
BTW, you probably mean
CXX = g++
CXXFLAGS = -Wall -pedantic
You certainly don't want -c explicitly in your CFLAGS or CXXFLAGS; you really should remove it.
Also, recipes should be after its rule, so you want
dzialania: $(OBJS)
$(LINK.cc) $^ -o $#
operacje.o: operacje.cpp operacje.h porownaj.h
$(CXX) $(CXXFLAGS) -c $< -o $#
The several spaces are actually a single tab character.
Run make -p to understand the rules known by make; see also this answer and that one.
Take time to read GNU make documentation.
I am trying to avoid relative paths in header declaration of C++ files. So, I had used the makefile by following an online example. But I am getting error. Please check the code and help me to resolve this
COMPILER = g++
IDIR = ./include
CXXFLAGS += -I$(IDIR)
CFLAGS += -I$(IDIR)
EXEC = hello
OBJECTS = main.o factorial.o hello.o
all: $(EXEC)
(---- I had also used CFLAGS instead of CXXFLAGS below but the same result###)
$(EXEC): $(OBJECTS)
$(COMPILER) $(CXXFLAGS) $(OBJECTS) -o $(EXEC)
main.o: main.cpp ./include/functions.h
$(COMPILER) $(CXXFLAGS) -c main.cpp
factorial.o: main.cpp ./include/functions.h
$(COMPILER) $(CXXFLAGS) -c factorial.cpp
hello.o: main.cpp ./include/functions.h
$(COMPILER) $(CXXFLAGS) -c hello.cpp
Error:
make: * No rule to make target 'include / functions.h "
required by "main.o" to create. Closing.
Directory Structure is
- main.cpp
- factorial.cpp
- hello.cpp
- MakeFile.mk
- +include (dir)
----->functions.h
main.cpp contains ----include "functions.h"---- in the header declaration
You are not using h files as a source files.
there should only be:
main.o: main.cpp
$(COMPILER) $(CXXFLAGS) -c main.cpp
edited:
I copy your folder content and write simple application where hello.cpp have a simple void function, factorial.cpp have simple int-returning function ane main.cpp have int main() and uses this functions, include.h hafe declarations of these two dummy functions.
Now. My makefile looks:
COMPILER = g++
IDIR = ./include
CXXFLAGS += -I$(IDIR)
EXEC = hello
OBJECTS = main.o factorial.o hello.o
all: $(EXEC)
$(EXEC): $(OBJECTS)
$(COMPILER) $(CXXFLAGS) $(OBJECTS) -o $(EXEC)
main.o: main.cpp factorial.o hello.o
$(COMPILER) -c $(CXXFLAGS) $^ -o $#
factorial.o: factorial.cpp
$(COMPILER) -c $(CXXFLAGS) $^ -o $#
hello.o: hello.cpp
$(COMPILER) -c $(CXXFLAGS) $^ -o $#
download for my sample
That should help You!
This is a pure make error message. The error is not related to the content of any .cpp or .h file. The error actually can come only from the content of the Makefile, and of the presence or absence of the files named in it.
As per this error message, make states that it cannot find the file include/functions.h. Double check it actually is here, with correct name and matching case.
For debugging purpose you can add the following lines to your Makefile:
./include/functions.h:
touch $#
It will instruct make to create an empty include/functions.h file if it's missing.