I've got a std::string number = "55353" and I want to extract the numbers that I've used in this string (5 and 3). Is there a function to do that? If so, please tell me it's name, I've been searching for quite a while now and still haven't found it...
UPD:
I've solved my problem (kinda)
std::string number(std::to_string(num));
std::string mas = "---------";
int k = 0;
for (int i = 0; i < number.size(); i++) {
char check = number[i];
for (int j = 0; j < mas.size(); j++) {
if (check == mas[j])
break;
if (check != mas[j] && check != mas[j+1]) {
mas[k] = check;
k++;
break;
}
}
}
mas.resize(k); mas.shrink_to_fit();
std::string mas will contain numbers that were used in std::string number which is a number converted to std::string using std::to_string().
Try this:
std::string test_data= "55335";
char digit_to_delete = '5';
unsigned int position = test_data.find();
test_data.erase(position, 1);
cout << "The changed string: " << test_data << "\n";
The algorithm is to find the number (as a character) within the string. The position is then used to erase the digit in the string.
Your question looks like homework, so I can guess what you forgot to tell us.
mas starts with ten -. If you spot a 5, you should replace the 6th (!) dash with a '5'. That "6th" is just an artifact of English. C++ starts to count at zero, not one. The position for zero is mas[0], the first element of the array.
The one tricky bit is to understand that characters in a string aren't numbers. The proper term for them is "(decimal) digits". And to get their numerical value, you have to subtract '0' - the character zero. So '5' - '0' == 5 - the character five minus the character zero is the number 5.
Related
I have an array of strings, I want to check whether the first characters of all the strings are the same or not.
I know how to retrieve the first character of a string, by this method
char first_letter;
first_letter = (*str)[0];
Initially, I thought to go the brute force way, by checking for the first letter for every strings, using a nested for loop.
int flag = 0
char f1,f2;
for(int i = 0;i < size_arr - 1;i++){
f1 = (*str[i])[0];
for(int j = i + 1;j < size_arr;j++){
f2 = (*str[j])[0];
if(f1 != f2)
flag += 1;
}
}
if(!(flag))
cout<<"All first characters same";
else
cout<<"Different";
But I need an approach to find whether the first letters of all the strings present in an array are the same or not. Is there any efficient way?
You needn't use a nested for loop.Rather modify your code this way
for(int i = 0;i < size_arr - 2;i++){
f1 = (*str[i])[0];
f2 = (*str[i+1])[0];
if( f1!=f2 ){
printf("not same characters at first position");
break;
flag=1;
}
}
if(flag==0)printf("same characters at first position");
I made this C approach for you (it's because you have used character arrays here, not std::string of C++ – so it's convenient to describe using C code):
#include <stdio.h>
#define MAX_LENGTH 128
int main(void) {
char string[][MAX_LENGTH] = {"This is string ONE.", "This one is TWO.",
"This is the third one."};
char first_letter = string[0][0];
int total_strs = sizeof(string) / sizeof(string[0]);
int FLAG = 1;
// Iterate through each letter of each string
for (int i = 0; i < total_strs; i++)
// First letter of the string is equal to first_letter?
if (string[i][0] != first_letter) {
FLAG = 0; // set to 0 as soon as it finds
break; // the initial_letter is NOT equal to the first
} // letter
if (FLAG)
fprintf(stdout, "The strings have the same initial letters.\n");
else
fprintf(stdout, "Not all strings have the same initial letters.\n");
return 0;
}
If you want to convert it to a C++ code, no big issue – just replace stdio.h with iostream, int FLAG = 1 with bool FLAG = true, fprintf() to std::cout statements, that's it.
In case you need to work with std::string for the same job, just simply get the array of those strings, set the flag as true by default, iterate through each string, and match in case the first string's initial letter is equivalent to others, eventually, mark the flag as false in as soon as a defected string is found.
The program will display (if same initial vs. if not):
The strings have the same initial letters.
Not all strings have the same initial letters.
I have two string S and T where length of S >= length of T. I have to determine a substring of S which has same length as T and has minimum difference with T. Here difference between two strings of same length means, the number of indexes where they differ. For example: "ABCD" and "ABCE" differ at 3rd index, so their difference is 1.
I know I can use KMP(Knuth Morris Pratt) Pattern Searching algorithm to search T within S. But, what if S doesn't contain T as a substring? So, I have coded a brute force approach to solve this:
int main() {
string S, T;
cin >> S >> T;
int SZ_S = S.size(), SZ_T = T.size(), MinDifference = INT_MAX;
string ans;
for (int i = 0; i + SZ_T <= SZ_S; i++) { // I generate all the substring of S
int CurrentDifference = 0; // and check their difference with T
for (int j = 0; j < SZ_T; j++) { // and store the substring with minimum difference
if (S[i + j] != T[j])
CurrentDifference++;
}
if (CurrentDifference < MinDifference) {
ans = S.substr (i, SZ_T);
MinDifference = CurrentDifference;
}
}
cout << ans << endl;
}
But, my approach only works when S and T has shorter length. But, the problem is S and T can have length as large as 2 * 10^5. How can I approach this?
Let's maximize the number of characters that match. We can solve the problem for each character of the alphabet separately, and then sum up the results for
substrings. To solve the problem for a particular character, give string S and T as sequences 0 and 1 and multiply them using the FFT https://en.wikipedia.org/wiki/Fast_Fourier_transform.
Complexity O(|A| * N log N) where |A| size of the alphabet (for an uppercase letter is 26).
So, I am trying to figure out the best/simplest way to do this. For my algorithms class we are supposed read in a string (containing up to 40 characters) from a file and use the first character of the string (data[1]...we are starting the array at 1 and wanting to use data[0] as something else later) as the number of rotations(up to 26) to rotate letters that follow (it's a Caesar cipher, basically).
An example of what we are trying to do is read in from a file something like : 2ABCD and output CDEF.
I've definitely made attempts, but I am just not sure how to compare the first letter in the array char[] to see which number, up to 26, it is. This is how I had it implemented (not the entire code, just the part that I'm having issues with):
int rotation = 0;
char data[41];
for(int i = 0; i < 41; i++)
{
data[i] = 0;
}
int j = 0;
while(!infile.eof())
{
infile >> data[j+1];
j++;
}
for(int i = 1; i < 27; i++)
{
if( i == data[1])
{
rotation = i;
cout << rotation;
}
}
My output is always 0 for rotation.
I'm sure the problem lies in the fact that I am trying to compare a char to a number and will probably have to convert to ascii? But I just wanted to ask and see if there was a better approach and get some pointers in the right direction, as I am pretty new to C++ syntax.
Thanks, as always.
Instead of formatted input, use unformatted input. Use
data[j+1] = infile.get();
instead of
infile >> data[j+1];
Also, the comparison of i to data[1] needs to be different.
for(int i = 1; i < 27; i++)
{
if( i == data[1]-'0')
// ^^^ need this to get the number 2 from the character '2'.
{
rotation = i;
std::cout << "Rotation: " << rotation << std::endl;
}
}
You can do this using modulo math, since characters can be treated as numbers.
Let's assume only uppercase letters (which makes the concept easier to understand).
Given:
static const char letters[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
const std::string original_text = "MY DOG EATS HOMEWORK";
std::string encrypted_text;
The loop:
for (unsigned int i = 0; i < original_text.size(); ++i)
{
Let's convert the character in the string to a number:
char c = original_text[i];
unsigned int cypher_index = c - 'A';
The cypher_index now contains the alphabetic offset of the letter, e.g. 'A' has index of 0.
Next, we rotate the cypher_index by adding an offset and using modulo arithmetic to "circle around":
cypher_index += (rotation_character - 'A'); // Add in the offset.
cypher_index = cypher_index % sizeof(letters); // Wrap around.
Finally, the new, shifted, letter is created by looking up in the letters array and append to the encrypted string:
encrypted_text += letters[cypher_index];
} // End of for loop.
The modulo operation, using the % operator, is great for when a "wrap around" of indices is needed.
With some more arithmetic and arrays, the process can be expanded to handle all letters and also some symbols.
First of all you have to cast the data chars to int before comparing them, just put (int) before the element of the char array and you will be okay.
Second, keep in mind that the ASCII table doesn't start with letters. There are some funny symbols up until 60-so element. So when you make i to be equal to data[1] you are practically giving it a number way higher than 27 so the loop stops.
The ASCII integer value of uppercase letters ranges from 65 to 90. In C and its descendents, you can just use 'A' through 'Z' in your for loop:
change
for(int i = 1; i < 27; i++)
to
for(int i = 'A'; i <= 'Z'; i++)
and you'll be comparing uppercase values. The statement
cout << rotation;
will print the ASCII values read from infile.
How much of the standard library are you permitted to use? Something like this would likely work better:
#include <iostream>
#include <string>
#include <sstream>
int main()
{
int rotation = 0;
std::string data;
std::stringstream ss( "2ABCD" );
ss >> rotation;
ss >> data;
for ( int i = 0; i < data.length(); i++ ) {
data[i] += rotation;
}
// C++11
// for ( auto& c : data ) {
// c += rotation;
// }
std::cout << data;
}
Live demo
I used a stringstream instead of a file stream for this example, so just replace ss with your infile. Also note that I didn't handle the wrap-around case (i.e., Z += 1 isn't going to give you A; you'll need to do some extra handling here), because I wanted to leave that to you :)
The reason your rotation is always 0 is because i is never == data[1]. ASCII character digits do not have the same underlying numeric value as their integer representations. For example, if data[1] is '5', it's integer value is actually 49. Hint: you'll need to know these values when handle the wrap-around case. Do a quick google for "ANSI character set" and you'll see all the different values.
Your determination of the rotation is also flawed in that you're only checking data[1]. What happens if you have a two-digit number, like 10?
Below is an example code that is not working the way I want.
#include <iostream>
using namespace std;
int main()
{
char testArray[] = "1 test";
int numReplace = 2;
testArray[0] = (int)numReplace;
cout<< testArray<<endl; //output is "? test" I wanted it 2, not a '?' there
//I was trying different things and hoping (int) helped
testArray[0] = '2';
cout<<testArray<<endl;//"2 test" which is what I want, but it was hardcoded in
//Is there a way to do it based on a variable?
return 0;
}
In a string with characters and integers, how do you go about replacing numbers? And when implementing this, is it different between doing it in C and C++?
If numReplace will be in range [0,9] you can do :-
testArray[0] = numReplace + '0';
If numReplace is outside [0,9] you need to
a) convert numReplace into string equivalent
b) code a function to replace a part of string by another evaluated in (a)
Ref: Best way to replace a part of string by another in c and other relevant post on SO
Also, since this is C++ code, you might consider using std::string, here replacement, number to string conversion, etc are much simpler.
You should look over the ASCII table over here: http://www.asciitable.com/
It's very comfortable - always look on the Decimal column for the ASCII value you're using.
In the line: TestArray[0] = (int)numreplace; You've actually put in the first spot the character with the decimal ASCII value of 2. numReplace + '0' could do the trick :)
About the C/C++ question, it is the same in both and about the characters and integers...
You should look for your number start and ending.
You should make a loop that'll look like this:
int temp = 0, numberLen, i, j, isOk = 1, isOk2 = 1, from, to, num;
char str[] = "asd 12983 asd";//will be added 1 to.
char *nstr;
for(i = 0 ; i < strlen(str) && isOk ; i++)
{
if(str[i] >= '0' && str[i] <= '9')
{
from = i;
for(j = i ; j < strlen(str) && isOk2)
{
if(str[j] < '0' || str[j] > '9')//not a number;
{
to=j-1;
isOk2 = 0;
}
}
isOk = 0; //for the loop to stop.
}
}
numberLen = to-from+1;
nstr = malloc(sizeof(char)*numberLen);//creating a string with the length of the number.
for(i = from ; i <= to ; i++)
{
nstr[i-from] = str[i];
}
/*nstr now contains the number*/
num = atoi(numstr);
num++; //adding - we wanted to have the number+1 in string.
itoa(num, nstr, 10);//putting num into nstr
for(i = from ; i <= to ; i++)
{
str[i] = nstr[i-from];
}
/*Now the string will contain "asd 12984 asd"*/
By the way, the most efficient way would probably be just looking for the last digit and add 1 to it's value (ASCII again) as the numbers in ASCII are following each other - '0'=48, '1'=49 and so on. But I just showed you how to treat them as numbers and work with them as integers and so. Hope it helped :)
I need to compare string into following way. Can anyone provide me some insight or algorithm in c++.
For example:
"a5" < "a11" - because 5 is less than 11
"6xxx < 007asdf" - because 6 < 7
"00042Q < 42s" - because Q < s alphabetically
"6 8" < "006 9" - because 8 < 9
I suggest you look at the algorithm strverscmp uses - indeed it might be that this function will do the job for you.
What this function does is the following. If both strings are equal,
return 0. Otherwise find the position between two bytes with the
property that before it both strings are equal, while directly after
it there is a difference. Find the largest consecutive digit strings
containing (or starting at, or ending at) this position. If one or
both of these is empty, then return what strcmp(3) would have
returned (numerical ordering of byte values). Otherwise, compare both
digit strings numerically, where digit strings with one or more
leading zeros are interpreted as if they have a decimal point in front
(so that in particular digit strings with more leading zeros come
before digit strings with fewer leading zeros). Thus, the ordering is
000, 00, 01, 010, 09, 0, 1, 9, 10.
Your examples only show digits, letters, and spaces. So for the moment I'll assume you ignore every other symbol (effectively treat them as spaces). You also seem to want to treat uppercase and lowercase letters as equivalent.
It also appears that you interpret runs of digits as a "term" and runs of letters as a "term", with any transition between a letter and a digit being equivalent to a space. A single space is considered equivalent to any number of spaces.
(Note: You are conspicuously missing an example of what to do in cases like:
"5a" vs "a11"
"a5" vs "11a"
So you have to work out what to do when you face a comparison of a numeric term with a string term. You also don't mention intrinsic equalities...such as should "5 a" == "5a" just because "5 a" < "5b"?)
One clear way of doing this would be turn the strings into std::vector of "terms", and then compare these vectors (rather than trying to compare the strings directly). These terms would be either numeric or string. This might help get you started, especially the STL answer:
how to split a string value that contains characters and numbers
Trickier methods that worked on the strings themselves without making an intermediary will be faster in one-off comparisons. But they'll likely be harder to understand and modify, and perhaps slower if you are going to repeatedly compare the same structures.
A nice aspect of parsing into a structure is that you get an intrinsic "cleanup" of the data in the process. Getting the information into a canonical form is often a goal in programs that are tolerating such a variety of inputs.
I'm assuming that you want the compare to be done in this order: presence of digits in range 1-9; value of digits; number of digits; value of the string after the digits.
It's in C, but you can easily transform it into using the C++ std::string class.
int isdigit(int c)
{
return c >= '1' && c <= '9';
}
int ndigits(const char *s)
{
int i, nd = 0;
int n = strlen(s);
for (i = 0; i < n; i++) {
if (isdigit(s[i]))
nd++;
}
return nd;
}
int compare(const char *s, const char *t)
{
int sd, td;
int i, j;
sd = ndigits(s);
td = ndigits(t);
/* presence of digits */
if (!sd && !td)
return strcasecmp(s, t);
else if (!sd)
return 1;
else if (!td)
return -1;
/* value of digits */
for (i = 0, j = 0; i < sd && j < td; i++, j++) {
while (! isdigit(*s))
s++;
while (! isdigit(*t))
t++;
if (*s != *t)
return *s - *t;
s++;
t++;
}
/* number of digits */
if (i < sd)
return 1;
else if (j < td)
return -1;
/* value of string after last digit */
return strcasecmp(s, t);
}
Try this and read about std::string.compare:
#include <iostream>
using namespace std;
int main(){
std::string fred = "a5";
std::string joe = "a11";
char x;
if ( fred.compare( joe ) )
{
std::cout << "fred is less than joe" << std::endl;
}
else
{
std::cout << "joe is less than fred" << std::endl;
}
cin >> x;
}