I have an issue of making a username AND an email unique. It is quite easy with relationaldatabase and just do 2 queries and get the count back on each.
select count(email) from users;
select count(username) from users;
But in DynamoDB (NoSQL) is it better (i.e. cheaper) to have 2 tables like so:
username table (where username is the hash) and check that table with a PUT and attribute_does_not_exist
AND
email table (where email is the hash) and check that table after the first one with a PUT and attribute_does_not_exist
OR do I
email table (hash) and username (GSI in that table). Then query the GSI first and if it doesn't exist then do a PUT with email and username
Which is better (cheaper)?
Two questions so I'll address them separately.
Which is cheaper?
You can run a single table with one GSI or two tables for the exact same cost if you want to because throughput for GSIs are provisioned the same way the primary table's throughput is.
Cost should not be a deciding factor.
Which is better?
The fact DynamoDB makes it difficult to have a secondary attribute retain its uniqueness is difficult is a common problem. Because of the asynchronous nature of GSIs the HASH or HASH/RANGE combination for a GSI is not unique. This can be taken advantage of in some circumstances.
If you use two tables you are taking the responsibility for keeping both tables in sync (something that is not easy to do in many situations). This comes with some important responsibilities (what happens if your app dies after writing to the first table but before it writes to the second), but this additional responsibility could allow you to maintain the uniqueness you want.
To explain how you would actually accomplish the dual uniqueness while maintaining accuracy, you would want to take advantage of conditional writes. The following outline describes a series of steps that would ensure that you maintain uniqueness.
Write record to username table with condition that username is not in the table, but include a conditional flag set to false (if write fails, we bail)
Write record to email table with condition that email is not in the table (if write fails, we delete the previous username record)
Update the username record to set the conditional flag to true
The reason you would want to use a conditional flag with the username to essentially indicate that the record is not in a valid state is to ensure you actually maintain the uniqueness.
Related
I'm having serious performance problems on Redshift and I've started to rethink my tables structures.
Right now, I'm identifying tables that have most significance on my dashboard. First of all, I run the following query:
SELECT * FROM admin.v_extended_table_info
WHERE table_id IN (
SELECT DISTINCT s.tbl FROM stl_scan s
JOIN pg_user u ON u.usesysid = s.userid
WHERE s.type=2 AND u.usename='looker'
)
ORDER BY SPLIT_PART("scans:rr:filt:sel:del",':',1)::int DESC,
size DESC;
Based on query result, I could identify a lot of small tables (1-1000 records) that are distributed as EVEN and it could be ALL - this tables are used in a lot of joins instructions.
Beside that, I've identified that 99% of my tables are using EVEN without sort key. I'm not using denormalized tables so I need to run plenty of joins to get data - for what I've read, EVEN is not good for joins because it could be distributed over the network.
I have 3 tables related to Ticket flow: user, ticket and ticket_history. All those tables are EVEN without sort keys and diststyle as EVEN.
For now, I would like to redesign table user: this table is used on join by condition ticket.user_id = user.id and where clauses like user.email = 'xxxx#xxxx.com' or user.email like '%#something.com%' or group by user.email.
First thing I'm planning to do is use diststyle as distribution and key as id. Does make sense use a unique value as dist key? I've read plenty of posts about dist keys and still confuse for me.
As sort keys makes sense use email as compound? I've read to avoid columns that grows like dates, timestamps or identities, that's why i'm not using it as interleaved. To avoid that like, I'm planning to create a new column to identify what is email domain.
After that, I'll change small tables to dist ALL and try my queries again.
Am I on right way? Any other tip?
This question could sound stupid but my tech background is only software development, I'm learning about Redshift and reading a lot of documentations.
The basic rule of thumb is:
Set the DISTKEY to the column that is most used in JOINs
Set the SORTKEY to the column(s) most used in WHEREs
You are correct that small tables can have a distribution of ALL, which would avoid sending data between nodes.
DISTKEY provides the most benefit when tables are join via a common column that has the same DISTKEY in both tables. This means that each row is contained on the same node and no data needs to be sent between nodes (or, more accurately, slices). However, you can only select one DISTKEY, so do it on the column that is most often used for the JOIN.
SORTKEY provides the most benefit when Redshift can skip over blocks of storage. Each block of storage contains data for one column and is marked with a MIN and MAX value. When a table is sorted on a particular column, it minimises the number of disk blocks that contain data for a given column value (since they are all located together, rather than being spread randomly throughout disk storage). Thus, use column(s) that are most frequently used in WHERE statements.
If the user.email wildcard search is slow, you can certainly create a new column with the domain. Or, for even better performance, you could consider creating a separate lookup table with just user_id and domain, having SORTKEY = domain. This will perform the fastest when searching by domain.
A tip from experience: I would advise against using an email address as a user_id because people sometimes want to change email address. It is better to use a unique number for such id columns, with email address as a changeable attribute. (I've seen software systems need major rewrites to fix such an early design decision!)
I want to create a DynamoDB table that allows me to save notes from users.
The attributes I have:
user_id
note_id (uuid)
type
text
The main queries I will need:
Get all notes of a certain user
Get a specific note
Get all notes of a certain type (the less used query)
I know that in terms of performance and DynamoDB partitions note_id would be the right choice because they are unique and would be distributed equally over the partitions but on the other hand is much harder to get all notes of a user without scanning all items or using a GSI. And if they are unique I suppose it doesn't make any sense to have a sort key.
The other option would be to use user_id as partition key and note_id as sort key, but if I have certain users that are a much larger number of notes than others wouldn't that impact my performance?
Is it better to have a partition key unique (like note_id) to scale well with DynamoDB partitions and use GSIs to create my queries or to use instead a partition key for my main query (user_id)?
Thanks
Possibly the simplest and most cost-effective way would be a single table:
Table Structure
note_id (uuid) / hash key
user_id
type
text
Have two GSIs, one for "Get all notes of a certain user" and one for "Get all notes of a certain type (the less used query)":
GSI for "Get all notes of a certain user"
user_id / hash key
note_id (uuid) / range key
type
text
A little note on this - which of your queries is the most frequent: "Get all notes of a certain user" or "Get a specific note"? If it's the former, then you could swap the GSI keys for the table keys and vice-versa (if that makes sense - in essence, have your user_id + note_id as the key for your table and the note_id as the GSI key). This also depends upon how you structure your user_id - I suspect you've already picked up on; make sure your user_id is not sequential - make it a UUID or similar.
GSI for "Get all notes of a certain type (the less used query)"
type / hash key
note_id (uuid) / range key
user_id
text
Depending upon the cardinality of the type field, you'll need to test whether a GSI will actually be of benefit here or not.
If the GSI is of little benefit and you need more performance, another option would be to store the type with an array of note_id in a separate table altogether. Beware of the 400k item limit with this one and the fact that you'll need to perform another query to get the text of the note.
With this table structure and GSIs, you're able to make a single query for the information you're after, rather than making two if you have two tables.
Of course, you know your data best - it's best to start with what you think is best and then test it to ensure it meets what you're looking for. DynamoDB is priced by provisioned throughput + the amount of indexed data stored so creating "fat" indexes with many attributes projects, as above, if there is a lot of data then it could become more cost effective to perform two queries and store less indexed data.
I would use user_id as your primary partition(hash) key and note_id as your primary range(sort) key.
You have already noted that in an ideal situation, each partition key is accessed with equal regularity to optimise performance see Design For Uniform Data Access Across Items In Your Tables. The use of user_id is perfectly fine as long as you have a good spread of users who regularly log in. Indeed AWS specifically encourage this option (see 'Choosing a Partition Key' table in the link above).
This approach will also make your application code much simpler than your alternative approach.
You then have a second choice which is whether to apply a Global Secondary Index for your get notes by type query. A GSI key, unlike a primary key, does not need to be unique (see AWS GSI guide, therefore I suggest you would simply use type as your GSI partition key without a range key.
The obvious plus side to using a GSI is a faster result when you perform the note type query. However you should be aware of the downsides also. A GSI has a separate throughput allowance than your table, so you need to provision this in addition to your table throughput (at extra cost). If you dont provision your GSI with enough read units it could end up slower than a scan on your table. If you dont provision enough write units, your table writes could be throttled, even if your table had enough write units.
Also, AWS warn that GSIs are updated asynchronously (usually within a fraction of a second but it can be longer). This means queries on your GSI might return the 'wrong' result if you have table writes and index reads very close together. If this was a problem you would need to handle it in your application code.
I see this as 2 tables. User and notes with a GSI on the notes table. Not sure how else you could do it. Using userId as primary key and note_id as sort key requires that you can only retrieve elements when you know both the user_id and the note_id. With DynamoDB if your not scanning you have to satisfy all the elements in the primary key, so both the partition and and sort if there is one. Below is how I would do this.
Get all notes of a certain user
When a user creates a note I would add this to the users table in the users notes attribute. When you want to get all of a users notes then retrieve the user and access the array/list of note_ids stored there.
{ userId: xxx,
notes: [ note_id_1,note_id_2,note_id_3]
}
Get a specific note
A notes table with node_id as the primary key would make that easy.
{
noteId: XXXX,
note: "sfsfsfsfsfsf",
type: "standard_note"
}
Get all notes of a certain type (the less used query)
I would use a GSI on the notes table for this with the attributes of "note_type" and note_id projected onto it.
Update
You can pull this off with one table and a GSI (See the two answers below for how) but I would not do it. Your data model is so simple why make it more complicated than users and notes.
User has an email address and a display name.
Both of these must be unique.
Both of these must be updatable as long as either is not being used already.
A User table will exist with additional non-key attributes and a guid ID.
How to model to support efficient query check if email address or display name is already being used?
Should I create a table with the guid as Key, no range, and 2 separate GSI one for email and one for display name (each being the key)? Both will also have a second field with the guid id of the user. Or should these be completely separate tables, or ????
Thoughts, is there a better way?
Thanks.
There are 3 ways you can design that I can think of:
As you have mentioned, a table with guid and 2 separate GSI one for email and other for Name.
You have stated that both the fields had to be unique, so potentially you can make any one of them as hash and create GSI for other.(This will run into problem as you mention that you need to update Email & Name as well, for that you have to delete old record and add a new record with same attributes and updated Hash keys)
Advantage of this would be that you need to pay less as there will be only one GSI compared to #1.
Another option is to use CloudSearch, your DynamoDB table can be integrated with cloudSearch, in this option you can simply create a table with guid no need to add any GSI, whenever you want to search you can search on CloudSearch to get the output.
One more advantage you will get in CloudSearch is that you will be able to query on any attributes of the table and can use different filters on them.
One thing you need to see it that price difference between #2 and #3, you can go with anyone which is better suited in terms of price and functionality.
If you implement this with other ways feel free to share it.
Hope that helps
i am working on a migration from MS Sql to DynamoDB and i'm not sure what's the best hash key for my purpose. In MS SQL i've an item table where i store some product information for different customers, so actually the primary key are two columns customer_id and item_no. In application code i need to query specific items and all items for a customer id, so my first idea was to setup the customer id as hash key and the item no as range key. But is this the best concept in terms of partitioning? I need to import product data daily with 50.000-100.000 products for some larger customers and as far as i know it would be better to have a random hash key. Otherwise the import job will run on one partition only.
Can somebody give me a hint what's the best data model in this case?
Bye,
Peter
It sounds like you need item_no as the partition key, with customer_id as the sort key. Also, in order to query all items for a customer_id efficiently you will want to create a Global Secondary Index on customer_id.
This configuration should give you a good distribution while allowing you to run the queries you have specified.
You are on the right track, you should really be careful on how you are handling write operations as you are executing an import job in a daily basis. Also avoid adding indexes unnecessarily as they will only multiply your writing operations.
Using customer_id as hash key and item_no as range key will provide the best option not only to query but also to upload your data.
As you mentioned, randomization of your customer ids would be very helpful to optimize the use of resources and prevent a possibility of a hot partition. In your case, I would follow the exact example contained in the DynamoDB documentation:
[...] One way to increase the write throughput of this application
would be to randomize the writes across multiple partition key values.
Choose a random number from a fixed set (for example, 1 to 200) and
concatenate it as a suffix [...]
So when you are writing your customer information just randomly assign the suffix to your customer ids, make sure you distribute them evenly (e.g. CustomerXYZ.1, CustomerXYZ.2, ..., CustomerXYZ.200).
To read all of the items you would need to obtain all of the items for each suffix. For example, you would first issue a Query request for the partition key value CustomerXYZ.1, then another Query for CustomerXYZ.2, and so on through CustomerXYZ.200. Because you know the suffix range (on this case 1...200), you only need to query the records appending each suffix to the customer id.
Each query by the hash key CustomerXYZ.n should return a set of items (specified by the range key) from that specific customer, your application would need to merge the results from all of the Query requests.
This will for sure make your life harder to read the records (in terms of the additional requests needed), however, the benefits of optimized throughput and performance will pay off. Remember a hot partition will not only increase your overall financial cost, but will also impact drastically your performance.
If you have a well designed partition key your queries will always return very quickly with minimum cost.
Additionally, make sure your import job does not execute write operations grouped by customer, for example, instead of writing all items from a specific customer in series, sort the write operations so they are distributed across all customers. Even though your customers will be distributed by several partitions (due to the id randomization process), you are better off taking this additional safety measure to prevent a burst of write activity in a single partition. More details below:
From the 'Distribute Write Activity During Data Upload' section of the official DynamoDB documentation:
To fully utilize all of the throughput capacity that has been
provisioned for your tables, you need to distribute your workload
across your partition key values. In this case, by directing an uneven
amount of upload work toward items all with the same partition key
value, you may not be able to fully utilize all of the resources
DynamoDB has provisioned for your table. You can distribute your
upload work by uploading one item from each partition key value first.
Then you repeat the pattern for the next set of sort key values for
all the items until you upload all the data [...]
Source:
http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GuidelinesForTables.html
I hope that helps. Regards.
I am going to implement a notification system, and I am trying to figure out a good way to store notifications within a database. I have a web application that uses a PostgreSQL database, but a relational database does not seem ideal for this use case; I want to support various types of notifications, each including different data, though a subset of the data is common for all types of notifications. Therefore I was thinking that a NoSQL database is probably better than trying to normalize a schema in a relational database, as this would be quite tricky.
My application is hosted in Amazon Web Services (AWS), and I have been looking a bit at DynamoDB for storing the notifications. This is because it is managed, so I do not have to deal with the operations of it. Ideally, I'd like to have used MongoDB, but I'd really prefer not having to deal with the operations of the database myself. I have been trying to come up with a way to do what I want in DynamoDB, but I have been struggling, and therefore I have a few questions.
Suppose that I want to store the following data for each notification:
An ID
User ID of the receiver of the notification
Notification type
Timestamp
Whether or not it has been read/seen
Meta data about the notification/event (no querying necessary for this)
Now, I would like to be able to query for the most recent X notifications for a given user. Also, in another query, I'd like to fetch the number of unread notifications for a particular user. I am trying to figure out a way that I can index my table to be able to do this efficiently.
I can rule out simply having a hash primary key, as I would not be doing lookups by simply a hash key. I don't know if a "hash and range primary key" would help me here, as I don't know which attribute to put as the range key. Could I have a unique notification ID as the hash key and the user ID as the range key? Would that allow me to do lookups only by the range key, i.e. without providing the hash key? Then perhaps a secondary index could help me to sort by the timestamp, if this is even possible.
I also looked at global secondary indexes, but the problem with these are that when querying the index, DynamoDB can only return attributes that are projected into the index - and since I would want all attributes to be returned, then I would effectively have to duplicate all of my data, which seems rather ridiculous.
How can I index my notifications table to support my use case? Is it even possible, or do you have any other recommendations?
Motivation Note: When using a Cloud Storage like DynamoDB we have to be aware of the Storage Model because that will directly impact
your performance, scalability, and financial costs. It is different
than working with a local database because you pay not only for the
data that you store but also the operations that you perform against
the data. Deleting a record is a WRITE operation for example, so if
you don't have an efficient plan for clean up (and your case being
Time Series Data specially needs one), you will pay the price. Your
Data Model will not show problems when dealing with small data volume
but can definitely ruin your plans when you need to scale. That being
said, decisions like creating (or not) an index, defining proper
attributes for your keys, creating table segmentation, and etc will
make the entire difference down the road. Choosing DynamoDB (or more
generically speaking, a Key-Value store) as any other architectural
decision comes with a trade-off, you need to clearly understand
certain concepts about the Storage Model to be able to use the tool
efficiently, choosing the right keys is indeed important but only the
tip of the iceberg. For example, if you overlook the fact that you are
dealing with Time Series Data, no matter what primary keys or index
you define, your provisioned throughput will not be optimized because
it is spread throughout your entire table (and its partitions) and NOT
ONLY THE DATA THAT IS FREQUENTLY ACCESSED, meaning that unused data is
directly impacting your throughput just because it is part of the same
table. This leads to cases where the
ProvisionedThroughputExceededException is thrown "unexpectedly" when
you know for sure that your provisioned throughput should be enough for your
demand, however, the TABLE PARTITION that is being unevenly accessed
has reached its limits (more details here).
The post below has more details, but I wanted to give you some motivation to read through it and understand that although you can certainly find an easier solution for now, it might mean starting from the scratch in the near future when you hit a wall (the "wall" might come as high financial costs, limitations on performance and scalability, or a combination of all).
Q: Could I have a unique notification ID as the hash key and the user ID as the range key? Would that allow me to do lookups only by the range key, i.e. without providing the hash key?
A: DynamoDB is a Key-Value storage meaning that the most efficient queries use the entire Key (Hash or Hash-Range). Using the Scan operation to actually perform a query just because you don't have your Key is definitely a sign of deficiency in your Data Model in regards to your requirements. There are a few things to consider and many options to avoid this problem (more details below).
Now before moving on, I would suggest you reading this quick post to clearly understand the difference between Hash Key and Hash+Range Key:
DynamoDB: When to use what PK type?
Your case is a typical Time Series Data scenario where your records become obsolete as the time goes by. There are two main factors you need to be careful about:
Make sure your tables have even access patterns
If you put all your notifications in a single table and the most recent ones are accessed more frequently, your provisioned throughput will not be used efficiently.
You should group the most accessed items in a single table so the provisioned throughput can be properly adjusted for the required access. Additionally, make sure you properly define a Hash Key that will allow even distribution of your data across multiple partitions.
The obsolete data is deleted with the most efficient way (effort, performance and cost wise)
The documentation suggests segmenting the data in different tables so you can delete or backup the entire table once the records become obsolete (see more details below).
Here is the section from the documentation that explains best practices related to Time Series Data:
Understand Access Patterns for Time Series Data
For each table that you create, you specify the throughput
requirements. DynamoDB allocates and reserves resources to handle your
throughput requirements with sustained low latency. When you design
your application and tables, you should consider your application's
access pattern to make the most efficient use of your table's
resources.
Suppose you design a table to track customer behavior on your site,
such as URLs that they click. You might design the table with hash and
range type primary key with Customer ID as the hash attribute and
date/time as the range attribute. In this application, customer data
grows indefinitely over time; however, the applications might show
uneven access pattern across all the items in the table where the
latest customer data is more relevant and your application might
access the latest items more frequently and as time passes these items
are less accessed, eventually the older items are rarely accessed. If
this is a known access pattern, you could take it into consideration
when designing your table schema. Instead of storing all items in a
single table, you could use multiple tables to store these items. For
example, you could create tables to store monthly or weekly data. For
the table storing data from the latest month or week, where data
access rate is high, request higher throughput and for tables storing
older data, you could dial down the throughput and save on resources.
You can save on resources by storing "hot" items in one table with
higher throughput settings, and "cold" items in another table with
lower throughput settings. You can remove old items by simply deleting
the tables. You can optionally backup these tables to other storage
options such as Amazon Simple Storage Service (Amazon S3). Deleting an
entire table is significantly more efficient than removing items
one-by-one, which essentially doubles the write throughput as you do
as many delete operations as put operations.
Source:
http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GuidelinesForTables.html#GuidelinesForTables.TimeSeriesDataAccessPatterns
For example, You could have your tables segmented by month:
Notifications_April, Notifications_May, etc
Q: I would like to be able to query for the most recent X notifications for a given user.
A: I would suggest using the Query operation and querying using only the Hash Key (UserId) having the Range Key to sort the notifications by the Timestamp (Date and Time).
Hash Key: UserId
Range Key: Timestamp
Note: A better solution would be the Hash Key to not only have the UserId but also another concatenated information that you could calculate before querying to make sure your Hash Key grants you even access patterns to your data. For example, you can start to have hot partitions if notifications from specific users are more accessed than others... having an additional information in the Hash Key would mitigate this risk.
Q: I'd like to fetch the number of unread notifications for a particular user.
A: Create a Global Secondary Index as a Sparse Index having the UserId as the Hash Key and Unread as the Range Key.
Example:
Index Name: Notifications_April_Unread
Hash Key: UserId
Range Key : Unuread
When you query this index by Hash Key (UserId) you would automatically have all unread notifications with no unnecessary scans through notifications which are not relevant to this case. Keep in mind that the original Primary Key from the table is automatically projected into the index, so in case you need to get more information about the notification you can always resort to those attributes to perform a GetItem or BatchGetItem on the original table.
Note: You can explore the idea of using different attributes other than the 'Unread' flag, the important thing is to keep in mind that a Sparse Index can help you on this Use Case (more details below).
Detailed Explanation:
I would have a sparse index to make sure that you can query a reduced dataset to do the count. In your case you can have an attribute "unread" to flag if the notification was read or not, and use that attribute to create the Sparse Index. When the user reads the notification you simply remove that attribute from the notification so it doesn't show up in the index anymore. Here are some guidelines from the documentation that clearly apply to your scenario:
Take Advantage of Sparse Indexes
For any item in a table, DynamoDB will only write a corresponding
index entry if the index range key
attribute value is present in the item. If the range key attribute
does not appear in every table item, the index is said to be sparse.
[...]
To track open orders, you can create an index on CustomerId (hash) and
IsOpen (range). Only those orders in the table with IsOpen defined
will appear in the index. Your application can then quickly and
efficiently find the orders that are still open by querying the index.
If you had thousands of orders, for example, but only a small number
that are open, the application can query the index and return the
OrderId of each open order. Your application will perform
significantly fewer reads than it would take to scan the entire
CustomerOrders table. [...]
Instead of writing an arbitrary value into the IsOpen attribute, you
can use a different attribute that will result in a useful sort order
in the index. To do this, you can create an OrderOpenDate attribute
and set it to the date on which the order was placed (and still delete
the attribute once the order is fulfilled), and create the OpenOrders
index with the schema CustomerId (hash) and OrderOpenDate (range).
This way when you query your index, the items will be returned in a
more useful sort order.[...]
Such a query can be very efficient, because the number of items in the
index will be significantly fewer than the number of items in the
table. In addition, the fewer table attributes you project into the
index, the fewer read capacity units you will consume from the index.
Source:
http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GuidelinesForGSI.html#GuidelinesForGSI.SparseIndexes
Find below some references to the operations that you will need to programmatically create and delete tables:
Create Table
http://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_CreateTable.html
Delete Table
http://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_DeleteTable.html
I'm an active user of DynamoDB and here is what I would do... Firstly, I'm assuming that you need to access notifications individually (e.g. to mark them as read/seen), in addition to getting the latest notifications by user_id.
Table design:
NotificationsTable
id - Hash key
user_id
timestamp
...
UserNotificationsIndex (Global Secondary Index)
user_id - Hash key
timestamp - Range key
id
When you query the UserNotificationsIndex, you set the user_id of the user whose notifications you want and ScanIndexForward to false, and DynamoDB will return the notification ids for that user in reverse chronological order. You can optionally set a limit on how many results you want returned, or get a max of 1 MB.
With regards to projecting attributes, you'll either have to project the attributes you need into the index, or you can simply project the id and then write "hydrate" functionality in your code that does a look up on each ID and returns the specific fields that you need.
If you really don't like that, here is an alternate solution for you... Set your id as your timestamp. For example, I would use the # of milliseconds since a custom epoch (e.g. Jan 1, 2015). Here is an alternate table design:
NotificationsTable
user_id - Hash key
id/timestamp - Range key
Now you can query the NotificationsTable directly, setting the user_id appropriately and setting ScanIndexForward to false on the sort of the Range key. Of course, this assumes that you won't have a collision where a user gets 2 notifications in the same millisecond. This should be unlikely, but I don't know the scale of your system.