Related
I use utf8 and have to save a constant in a char array:
const char s[] = {0xE2,0x82,0xAC, 0}; //the euro sign
However it gives me error:
test.cpp:15:40: error: narrowing conversion of ‘226’ from ‘int’ to ‘const char’ inside { } [-fpermissive]
I have to cast all the hex numbers to char, which I feel tedious and don't smell good. Is there any other proper way of doing this?
char may be signed or unsigned (and the default is implementation specific). You probably want
const unsigned char s[] = {0xE2,0x82,0xAC, 0};
or
const char s[] = "\xe2\x82\xac";
or with many recent compilers (including GCC)
const char s[] = "€";
(a string literal is an array of char unless you give it some prefix)
See -funsigned-char (or -fsigned-char) option of GCC.
On some implementations a char is unsigned and CHAR_MAX is 255 (and CHAR_MIN is 0). On others char-s are signed so CHAR_MIN is -128 and CHAR_MAX is 127 (and e.g. things are different on Linux/PowerPC/32 bits and Linux/x86/32 bits). AFAIK nothing in the standard prohibits 19 bits signed chars.
The short answer to your question is that you are overflowing a char. A char has the range of [-128, 127]. 0xE2 = 226 > 127. What you need to use is an unsigned char, which has a range of [0, 255].
unsigned char s = {0xE2,0x82,0xAC, 0};
While it may well be tedious to be putting lots of casts in your code, it actually smells extremely GOOD to me to use as strong of typing as possible.
As noted above, when you specify type "char" you are inviting a compiler to choose whatever the compiler writer preferred (signed or unsigned). I'm no expert on UTF-8, but there is no reason to make your code non-portable if you don't need to.
As far as your constants, I've used compilers that default constants written that way to signed ints, as well as compilers that consider the context and interpret them accordingly. Note that converting between signed and unsigned can overflow EITHER WAY. For the same number of bits, a negative overflows an unsigned (obviously) and an unsigned with the top bit set overflows a signed, because the top bit means negative.
In this case, your compiler is taking your constants as unsigned 8 bit--OR LARGER--which means they don't fit as signed 8 bit. And we are all grateful that the compiler complains (at least I am).
My perspective is, there is nothing at all bad about casting to show exactly what you intend to happen. And if a compiler lets you assign between signed and unsigned, it should require that you cast regardless of variables or constants. eg
const int8_t a = (int8_t) 0xFF; // will be -1
although in my example, it would be better to assign -1. When you are having to add extra casts, they either make sense, or you should code your constants so they make sense for the type you are assigning to.
Is there a way to mix these? I want a define macro FX_RGB(R,G,B) that makes a const string "\x01\xRR\xGG\xBB" so I can do the following:
const char* LED_text = "Hello " FX_RGB(0xff, 0xff, 0x80) "World";
and get a sting: const char* LED_text = "Hello \x01\xff\xff\x80World";
There are some cases where a byte array is implemented in a library using a char type, which is a signed type for many compilers.
Is there a simple, readable and correct way to initialize a signed char with a hex value which is greater than 127 and not bigger than 255?
Currently I end up with the following, and I keep thinking that there must be something simpler:
const unsigned char ff_unsigned = 0xff;
const char ff_signed = static_cast<const char>(ff_unsigned);
I want a solution with no warnings, even when using higher compiler warning levels than the default.
The following solution e.g. creates C4310: cast truncates constant value with MSVC 2013:
const char ff_signed = char(0xff);
Yes there is. Use single quotation characters with \x as the prefix. That denotes a hexadecimal literal char type.
For example: '\xff'.
But note that char can be signed or unsigned and up to and including C++11 it can even be a 1's complement signed type.
const char ff_unsigned = '\xff';
0xff is an int and '\xff' is a char.`You can use
const char ff_signed = (char)0xff;
or
const char ff_signed = '\xff';
I want to use a function that expects data like this:
void process(char *data_in, int data_len);
So it's just processing some bytes really.
But I'm more comfortable working with "unsigned char" when it comes to raw bytes (it somehow "feels" more right to deal with positive 0 to 255 values only), so my question is:
Can I always safely pass a unsigned char * into this function?
In other words:
Is it guaranteed that I can safely convert (cast) between char and unsigned char at will, without any loss of information?
Can I safely convert (cast) between pointers to char and unsigned char at will, without any loss of information?
Bonus: Is the answer same in C and C++?
The short answer is yes if you use an explicit cast, but to explain it in detail, there are three aspects to look at:
1) Legality of the conversion
Converting between signed T* and unsigned T* (for some type T) in either direction is generally possible because the source type can first be converted to void * (this is a standard conversion, §4.10), and the void * can be converted to the destination type using an explicit static_cast (§5.2.9/13):
static_cast<unsigned char*>(static_cast<void *>(data_in))
This can be abbreviated (§5.2.10/7) as
reinterpret_cast<unsigned char *>(data_in)
because char is a standard-layout type (§3.9.1/7,8 and §3.9/9) and signedness does not change alignment (§3.9.1/1). It can also be written as a C-style cast:
(unsigned char *)(data_in)
Again, this works both ways, from unsigned* to signed* and back. There is also a guarantee that if you apply this procedure one way and then back, the pointer value (i.e. the address it's pointing to) won't have changed (§5.2.10/7).
All of this applies not only to conversions between signed char * and unsigned char *, but also to char */unsigned char * and char */signed char *, respectively. (char, signed char and unsigned char are formally three distinct types, §3.9.1/1.)
To be clear, it doesn't matter which of the three cast-methods you use, but you must use one. Merely passing the pointer will not work, as the conversion, while legal, is not a standard conversion, so it won't be performed implicitly (the compiler will issue an error if you try).
2) Well-definedness of the access to the values
What happens if, inside the function, you dereference the pointer, i.e. you perform *data_in to retrieve a glvalue for the underlying character; is this well-defined and legal? The relevant rule here is the strict-aliasing rule (§3.10/10):
If a program attempts to access the stored value of an object through a glvalue of other than one of the following types the behavior is undefined:
[...]
a type that is the signed or unsigned type corresponding to the dynamic type of the object,
[...]
a char or unsigned char type.
Therefore, accessing a signed char (or char) through an unsigned char* (or char) and vice versa is not disallowed by this rule – you should be able to do this without problems.
3) Resulting values
After derefencing the type-converted pointer, will you be able to work with the value you get? It's important to bear in mind that the conversion and dereferencing of the pointer described above amounts to reinterpreting (not changing!) the bit pattern stored at the address of the character. So what happens when a bit pattern for a signed character is interpreted as that of an unsigned character (or vice versa)?
When going from unsigned to signed, the typical effect will be that for values between 0 and 128 nothing happens, and values above 128 become negative. Similar in reverse: When going from signed to unsigned, negative values will appear as values greater than 128.
But this behaviour isn't actually guaranteed by the Standard. The only thing the Standard guarantees is that for all three types, char, unsigned char and signed char, all bits (not necessarily 8, btw) are used for the value representation. So if you interpret one as the other, make a few copies and then store it back to the original location, you can be sure that there will be no information loss (as you required), but you won't necessarily know what the values actually mean (at least not in a fully portable way).
unsigned char or signed char is just interpretation: there is no conversion happening.
Since you are processing bytes, to show intent, it would be better to declare as
void process(unsigned char *data_in, int data_len);
[As noted by an editor: A plain char may be either a signed or an unsigned type. The C and C++ standards explicitly allow either (it is always a separate type from either unsigned char or signed char, but has the same range as one of them)]
Yes, you can always convert from char to unsigned char & vice versa without problems. If you run the following code, and compare it with an ASCII table (ref. http://www.asciitable.com/), you can see a proof by yourself, and how the C/C++ deal with the conversions - they deal exactly in the same way:
#include "stdio.h"
int main(void) {
//converting from char to unsigned char
char c = 0;
printf("%d byte(s)\n", sizeof(char)); // result: 1byte, i.e. 8bits, so there are 2^8=256 values that a char can store.
for (int i=0; i<256; i++){
printf("int value: %d - from: %c\tto: %c\n", c, c, (unsigned char) c);
c++;
}
//converting from unsigned char to char
unsigned char uc = 0;
printf("\n%d byte(s)\n", sizeof(unsigned char));
for (int i=0; i<256; i++){
printf("int value: %d - from: %c\tto: %c\n", uc, uc, (char) uc);
uc++;
}
}
I will not post the output because it has too many lines! It can be noticed in the output that in the first half of each section, i.e. from i=0:127, the conversion from chars to unsigned chars and vice-versa works well, without any modification or loss.
However, from i=128:255 the chars and the unsigned chars cannot be casted, or you would have different outputs, because unsigned char saves the values from [0:256] and char saves the values in the interval [-128:127]). Nevertheless, the behaviour in this 2nd half is irrelevant, because in C/C++, in general, you only lead with chars/unsigned chars as ASCII characters, whose can take only 128 different values and the other 128 values (positive for chars or negative for unsigned chars) are never used.
If you never put a value in a char that doesn't represent a character, and you never put a value in an unsigned char that doesn't represent a character, everything will be OK!
extra: even if you use UTF-8 or other encodings (for special characters) in your strings with C/C++, everything with this kind of casts would be OK, for instance, using UTF-8 encoding (ref. http://lwp.interglacial.com/appf_01.htm):
char hearts[] = {0xe2, 0x99, 0xa5, 0x00};
char diamonds[] = {0xe2, 0x99, 0xa6, 0x00};
char clubs[] = {0xe2, 0x99, 0xa3, 0x00};
char spades[] = {0xe2, 0x99, 0xa0, 0x00};
printf("hearts (%s)\ndiamonds (%s)\nclubs (%s)\nspades (%s)\n\n", hearts, diamonds, clubs, spades);
the output of that code will be:
hearts (♥)
diamonds (♦)
clubs (♣)
spades (♠)
even if you cast each of its chars to unsigned chars.
so:
"can I always safely pass a unsigned char * into this function?"
yes!
"is it guaranteed that I can safely convert (cast) between char and unsigned char at will, without any loss of information?"
yes!
"can I safely convert (cast) between pointers to char and unsigned char at will, without any loss of information?"
yes!
"is the answer same in C and C++?"
yes!
Semantically, passing between unsigned char * and char * are safe, and even though casting between them, so as in c++.
However, consider the following sample code:
#include "stdio.h"
void process_unsigned(unsigned char *data_in, int data_len) {
int i=data_len;
unsigned short product=1;
for(; i--; product*=data_in[i])
;
for(i=sizeof(product); i--; ) {
data_in[i]=((unsigned char *)&product)[i];
printf("%d\r\n", data_in[i]);
}
}
void process(char *data_in, int data_len) {
int i=data_len;
unsigned short product=1;
for(; i--; product*=data_in[i])
;
for(i=sizeof(product); i--; ) {
data_in[i]=((unsigned char *)&product)[i];
printf("%d\r\n", data_in[i]);
}
}
void main() {
unsigned char
a[]={1, -1},
b[]={1, -1};
process_unsigned(a, sizeof(a));
process(b, sizeof(b));
getch();
}
output:
0
255
-1
-1
All the code inside process_unsigned and process are just IDENTICAL. The only difference is unsigned and signed. This sample shows that the code in the black box, do be affected by the SIGN, and nothing is guaranteed between the callee and caller.
Thus I would say that, it's applicable of passing only, but none of any other possibilities is guaranteed.
You can pass a pointer to a different kind of char, but you may need to explicitly cast it. The pointers are guaranteed to be the same size and the same values. There isn't going to be any information loss during the conversion.
If you want to convert char to unsigned char inside the function, you just assign a char value to an unsigned char variable or cast the char value to unsigned char.
If you need to convert unsigned char to char without data loss, it's a bit harder, but still possible:
#include <limits.h>
char uc2c(unsigned char c)
{
#if CHAR_MIN == 0
// char is unsigned
return c;
#else
// char is signed
if (c <= CHAR_MAX)
return c;
else
// ASSUMPTION 1: int is larger than char
// ASSUMPTION 2: integers are 2's complement
return c - CHAR_MAX - 1 - CHAR_MAX - 1;
#endif
}
This function will convert unsigned char to char in such a way that the returned value can be converted back to the same unsigned char value as the parameter.
You really need to view the code to process() to know if you can safely pass in unsigned characters. If the function uses the characters as an index into an array, then no, you can't use unsigned data.
I have downloaded an image and it is saved in a std::string.
Now I want to use/open it with following conditions:
typedef uint8_t byte //1 byte unsigned integer type.
static open(const byte * data, long size)
How do I cast from string to byte* ?
/EDIT:
i have already tried this:
_data = std::vector<byte>(s.begin(), s.end());
//_data = std::vector<uint8_t>(s.begin(), s.end()); //also fails, same error
_p = &_data[0];
open(_p, _data.size())
but i get:
undefined reference to 'open(unsigned char const*, long)'
why does it interpret byte wrongly as char?!
/EDIT2:
just to test it i changed to function call to
open(*_p, _data.size())
but then i get:
error: no matching function for call to 'open(unsigned char&, size_t)'
[...] open(const byte*, long int) <near match>
So the function is definitly found...
Two possibilities:
1) the common one. On your system, char is either 2's complement or else unsigned, and hence it is "safe" to read chars as unsigned chars, and (if char is signed) the result is the same as converting from signed to unsigned.
In which case, use reinterpret_cast<const uint8_t*>(string.data()).
2) the uncommon one. On your system, char is signed and not 2's complement and hence for char *ptr pointing to a negative value the result of *(uint8_t*)ptr is not equal to (uint8_t)(*ptr). Then depending what open actually does with the data, the above might be fine or you might have to copy the data out of a string and into a container of uint8_t, converting as you go. For example, vector<uint8_t> v(string.begin(), string.end());. Then use &v[0] provided that the length is not 0 (unlike string, you aren't permitted to take a pointer to the data of an empty vector even if you never dereference it).
Non-2's-complement systems are approximately non-existent, and even if there was one I think it's fairly unlikely that a system on which char was signed and not 2's complement would provide uint8_t at all (because if it does then it must also provide int8_t). So (2) only serves pedantic completeness.
why does it interpret byte wrongly as char
It isn't wrong, uint8_t is a typedef for unsigned char on your system.
std::string string_with_image;
string_with_image.data();
Is it safe to convert, say, from an unsigned char * to a signed char * (or just a char *?
The access is well-defined, you are allowed to access an object through a pointer to signed or unsigned type corresponding to the dynamic type of the object (3.10/15).
Additionally, signed char is guaranteed not to have any trap values and as such you can safely read through the signed char pointer no matter what the value of the original unsigned char object was.
You can, of course, expect that the values you read through one pointer will be different from the values you read through the other one.
Edit: regarding sellibitze's comment, this is what 3.9.1/1 says.
A char, a signed char, and an unsigned char occupy the same amount of storage and have the same alignment requirements (3.9); that is, they have the same object representation. For character types, all bits of the object representation participate in the value representation. For unsigned character types, all possible bit patterns of the value representation represent numbers.
So indeed it seems that signed char may have trap values. Nice catch!
The conversion should be safe, as all you're doing is converting from one type of character to another, which should have the same size. Just be aware of what sort of data your code is expecting when you dereference the pointer, as the numeric ranges of the two data types are different. (i.e. if your number pointed by the pointer was originally positive as unsigned, it might become a negative number once the pointer is converted to a signed char* and you dereference it.)
Casting changes the type, but does not affect the bit representation. Casting from unsigned char to signed char does not change the value at all, but it affects the meaning of the value.
Here is an example:
#include <stdio.h>
int main(int args, char** argv) {
/* example 1 */
unsigned char a_unsigned_char = 192;
signed char b_signed_char = b_unsigned_char;
printf("%d, %d\n", a_signed_char, a_unsigned_char); //192, -64
/* example 2 */
unsigned char b_unsigned_char = 32;
signed char a_signed_char = a_unsigned_char;
printf("%d, %d\n", b_signed_char, b_unsigned_char); //32, 32
return 0;
}
In the first example, you have an unsigned char with value 192, or 110000000 in binary. After the cast to signed char, the value is still 110000000, but that happens to be the 2s-complement representation of -64. Signed values are stored in 2s-complement representation.
In the second example, our unsigned initial value (32) is less than 128, so it seems unaffected by the cast. The binary representation is 00100000, which is still 32 in 2s-complement representation.
To "safely" cast from unsigned char to signed char, ensure the value is less than 128.
It depends on how you are going to use the pointer. You are just converting the pointer type.
You can safely convert an unsigned char* to a char * as the function you are calling will be expecting the behavior from a char pointer, but, if your char value goes over 127 then you will get a result that will not be what you expected, so just make certain that what you have in your unsigned array is valid for a signed array.
I've seen it go wrong in a few ways, converting to a signed char from an unsigned char.
One, if you're using it as an index to an array, that index could go negative.
Secondly, if inputted to a switch statement, it may result in a negative input which often is something the switch isn't expecting.
Third, it has different behavior on an arithmetic right shift
int x = ...;
char c = 128
unsigned char u = 128
c >> x;
has a different result than
u >> x;
Because the former is sign-extended and the latter isn't.
Fourth, a signed character causes underflow at a different point than an unsigned character.
So a common overflow check,
(c + x > c)
could return a different result than
(u + x > u)
Safe if you are dealing with only ASCII data.
I'm astonished it hasn't been mentioned yet: Boost numeric cast should do the trick - but only for the data of course.
Pointers are always pointers. By casting them to a different type, you only change the way the compiler interprets the data pointed to.