I want to run the Windows 10 IoT(check here) Raspberry on VirtualBox.
I followed all steps explained here
I'm getting this error:
Failed to open a session for the virtual machine w10IoT.
Failed to open image 'G:\VM_Workstations\wIoTTest\kmdF41E.vhd' for writing due to wrong permissions (VERR_VD_IMAGE_READ_ONLY).
Failed to attach driver below us! Image is read-only. (VERR_VD_IMAGE_READ_ONLY).
AHCI: Failed to attach drive to Port0 (VERR_VD_IMAGE_READ_ONLY).
Result Code: E_FAIL (0x80004005)
Component: ConsoleWrap
Interface: IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
I tried for both MinnowBoardMax and also for Raspberry.
I have no Raspberry board, so help needed to run this on VirtualBox.
Related
After installing openSUSE-2022-10067 Security update for virtualbox, I got the following error when trying to start a guest vitural machine: Failed to open a session for the virtual machine. Result Code NS_ERROR_FAILURE (0x80004005) Component: SessionMachine Interface: ISession{c0447716-ff5a-4795-b57a-ecd5fffa18a4}
Details: The VM Session was aborted.
I had above errors with MS Win-10 and Opensuse Leap 15.4 Guest VM's on a Open Suse Leap 15.4 VM-Host-System.
Anybody experiances the same issue?
My temporary solution was to rollback the snapshot to pre-installation of the security update for virtualbox. Then it was possible to start the VM's without any errors again.
I think I've seen a similar crash when trying to start a VM with the combination of VirtualBox 6.1.35 and 6.1.36 in combination with the VirtualBox Extension Pack (EP) 6.1.34. Did you also upgrade the EP? ;)
This solves my problem in VirtualBox 6.1.36
With 6.1.35 I could not even update the EP without running in the same error.
Hope this helps.
BR Markus
I am trying to launch two VMs using docker machine:
docker-machine create --driver virtualbox myvm1
docker-machine create --driver virtualbox myvm2
I see the following error in the output:
(myvm2) Progress state: NS_ERROR_FAILURE
(myvm2) VBoxManage: error: Failed to create the host-only adapter
(myvm2) VBoxManage: error: VBoxNetAdpCtl: Error while adding new interface: failed to open /dev/vboxnetctl: No such file or directory
(myvm2) VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component HostNetworkInterfaceWrap, interface IHostNetworkInterface
(myvm2) VBoxManage: error: Context: "RTEXITCODE handleCreate(HandlerArg *)" at line 94 of file VBoxManageHostonly.cpp
(myvm2)
(myvm2) This is a known VirtualBox bug. Let's try to recover anyway...
Error creating machine: Error in driver during machine creation: Error setting up host only network on machine start: The host-only adapter we just created is not visible. This is a well known VirtualBox bug. You might want to uninstall it and reinstall at least version 5.0.12 that is is supposed to fix this issue
I installed the latest version of VirtualBox (6.0.0) from there. When I open VirtualBox window and click on the VMs in the left panel I get the following error popup:
UPDATE
I tried to re-install VirtualBox 6.0.0 and in the end of the VirtualBox installation process I saw the following screen:
Maybe it is a reason of the failures described above? My mac is running on 10.14.1 macOS Mojave
How can I fix these errors?
You probably need to approve the VirtualBox kernel extension in System Preferences under Security & Privacy:
After you allow the kernel extension, the installer should be able to run successfully.
The (rc=-1908) usually happens when the secure boot is enable, try to disable and run your vm again
Secure Boot settings are available in Startup Security Utility:
Turn on your Mac, then press and hold Command (⌘)-R immediately after you see the Apple logo to start up from macOS Recovery.
When you see the macOS Utilities window, choose Utilities > Startup Security Utility from the menu bar.
When you're asked to authenticate, click Enter macOS Password, then choose an administrator account and enter its password.
Select "No security" option
I got this exact error after upgrading my Mac to Monterey. Remove Virtualbox and reinstall solves the problem.
I am new to Packer and trying to build our environment from scratch automatically. I am getting below error when I try to create a VM using vmware-iso in Packer. So wanted to know if I need to install VMWare to run packer?
--> vmware-iso: Failed creating VMware driver: Unable to initialize any driver f
or this platform. The errors
from each driver are shown below. Please fix at least one driver
to continue:
* VMware application not found:
* VMware application not found:
* VMware application not found:
* VMware application not found:
*
You don't have VMware installed or on the path on your host machine. You need to install VMware Workstation etc.
I'm running virtualbox 4.1 on Debian. If I try to start a VM with a bridged NIC I get this error:
error: Failed to open/create
the internal network 'HostInterfaceNetworking-eth0' (you might need to
modprobe vboxnetflt to make it accessible) (VERR_PERMISSION_DENIED).
VBoxManage: error: Failed to attach the network LUN
(VERR_PERMISSION_DENIED) VBoxManage: error: Details: code
NS_ERROR_FAILURE (0x80004005), component Console, interface IConsole,
callee
System: Linux localhost.localdomain 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux
Virtual Box Version: 4.1.18_Debianr78361
The VM starts with a NAT NIC config.
The weirdest thing is if I export this VM and import it to another user, it works. The other user I tested with was the user I usually use for running auto started virtual machines. But I cant remember doing anything special setting this user up. It is only in its own group and no others. I tried to create a new user and import the VM, but I get the same error as above. I've tried purging virtual box, and completely deleting my conf but it does not work. I just cant figure out what the diff is.
Any help appreciated.
The solution for me was to install virtualbox-4.0 from linux mint. I believe that is actually a downgrade from what in debians repos. Probably packaged different too. Still don't know how the heck I was getting the error I was getting...
sudo apt-get install -f virtualbox-4.0
sudo /etc/init.d/vboxdrv setup
I just updated virtualbox to the latest 4.1.16 r78094 and realized that I can no longer start my virtual machines.
If I start a VM, the error displayed is:
Failed to open a session for the virtual machine Historical Image.
Failed to load VMMR0.r0 (VERR_NO_MEMORY).
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb}
I have 8GB RAM in my VM host which is running OSX 10.6 of which I have over 4GBs free. Does anyone know how I can get my VMs working again?
It is a well known issue and at the moment you have two options:
install new version from http://download.virtualbox.org/virtualbox/4.1.18/VirtualBox-4.1.18-78361-OSX.dmg
downgrade your version to previous one: https://www.virtualbox.org/wiki/Download_Old_Builds_4_1