I'm the Admin user in Testlink. I'm trying to Reset the password of an user. when clicking on Reset Password button the following message appearing.
Password Reset can not be done. Reason: SMTP Error: Could not connect to SMTP host. Please let me know how to resolve this issue.
/* [SMTP] */
/**
* #var string SMTP server name or IP address ("localhost" should work in the most cases)
* Configure using custom_config.inc.php
* #uses lib/functions/email_api.php
*/
**$g_smtp_host = '22'; # SMTP server MUST BE configured**
# Configure using custom_config.inc.php
$g_tl_admin_email = 'amirdjn#gmail.com'; # for problem/error notification
$g_from_email = 'OAI-Tools#oneaccess-net.com'; # email sender
$g_return_path_email = 'amirdjn#gmail.com';
You can't connect to SMTP host because
SMTP server MUST BE configured**
Just set $g_smtp_host in your config file:
/* [SMTP] */
/**
* #var string SMTP server name or IP address ("localhost" should work in the most cases)
* Configure using custom_config.inc.php
* #uses lib/functions/email_api.php
*/
# SMTP server MUST BE configured**
$g_smtp_host = 'smtp_host_fqdn';
# Configure using custom_config.inc.php
$g_tl_admin_email = 'amirdjn#gmail.com'; # for problem/error notification
$g_from_email = 'OAI-Tools#oneaccess-net.com'; # email sender
$g_return_path_email = 'amirdjn#gmail.com';
Related
I'm running a java app in JBoss 6.4.0 in an Amazon Web Services red hat 8 EC2 instance.
When my app tries to send an email via javax.mail I'm getting an error "Could not convert socket to TLS".
I then coded up the AmazonSESSample.java sample program and tried it. I ran it in my EC2 instance outside JBoss and it ran successfully. (The AmazonSESSample program can be found here: https://docs.aws.amazon.com/ses/latest/DeveloperGuide/examples-send-using-smtp.html)
Then I commented out the email code in my java app, and replaced it with the code in AmazonSESSample.java. When I run my java app with the AmazonSESSample code in JBoss I get the same error: "Could not convert socket to TLS". So the AmazonSESSample works fine outside JBoss, and gives an error when running inside JBoss.
Here is the AmazonSESSample code in my app. Can somebody help me fix the "Could not convert socket to TLS" error?:
public class AmazonSESSample {
private static final Logger logger = LogManager.getFormatterLogger("AmazonSESSample");
// Replace sender#example.com with your "From" address.
// This address must be verified.
static final String FROM = "email1#gmail.com";
static final String FROMNAME = "Steve";
// Replace recipient#example.com with a "To" address. If your account
// is still in the sandbox, this address must be verified.
static final String TO = "email2#gmail.com";
// Replace smtp_username with your Amazon SES SMTP user name.
static final String SMTP_USERNAME = "thisIsNotActualghijikl";
// Replace smtp_password with your Amazon SES SMTP password.
static final String SMTP_PASSWORD = "abcdefThisIsNotActual";
// Amazon SES SMTP host name. This example uses the US West (Oregon) region.
// See https://docs.aws.amazon.com/ses/latest/DeveloperGuide/regions.html#region-endpoints
// for more information.
static final String HOST = "email-smtp.us-east-2.amazonaws.com";
// The port you will connect to on the Amazon SES SMTP endpoint.
static final int PORT = 587;
static final String SUBJECT = "Amazon SES test (SMTP interface accessed using Java)";
static final String BODY = String.join(
System.getProperty("line.separator"),
"<h1>Amazon SES SMTP Email Test</h1>",
"<p>This email was sent with Amazon SES using the ",
"<a href='https://github.com/javaee/javamail'>Javamail Package</a>",
" for <a href='https://www.java.com'>Java</a>."
);
public int sendEmail(DisplayEmailMessage emailMessage) throws UnsupportedEncodingException, MessagingException {
// Create a Properties object to contain connection configuration information.
Properties props = System.getProperties();
props.put("mail.transport.protocol", "smtp");
props.put("mail.smtp.port", PORT);
props.put("mail.smtp.starttls.enable", "true");
props.put("mail.smtp.auth", "true");
// Create a Session object to represent a mail session with the specified properties.
Session session = Session.getDefaultInstance(props);
// Create a message with the specified information.
MimeMessage msg = new MimeMessage(session);
msg.setFrom(new InternetAddress(FROM, FROMNAME));
msg.setRecipient(Message.RecipientType.TO, new InternetAddress(TO));
msg.setSubject(SUBJECT);
msg.setContent(BODY, "text/html");
// Create a transport.
Transport transport = session.getTransport();
// Send the message.
try {
System.out.println("Sending...");
// Connect to Amazon SES using the SMTP username and password you specified above.
transport.connect(HOST, SMTP_USERNAME, SMTP_PASSWORD);
// Send the email.
transport.sendMessage(msg, msg.getAllRecipients());
System.out.println("Email sent!");
}
catch (Exception ex) {
System.out.println("The email was not sent.");
System.out.println("Error message: " + ex.getMessage());
}
finally {
// Close and terminate the connection.
transport.close();
}
return 0;
}
}
Here is the javamail debug output:
DEBUG: setDebug: JavaMail version 1.4.5.redhat-2
Sending email to 123#gmail.com
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
Starting to connect at Sun Dec 26 13:14:23 UTC 2021 to email 123#gmail.com
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: trying to connect to host "smtp.dreamhost.com", port 587, isSSL false
220 pdx1-sub0-mail-a290.dreamhost.com ESMTP
DEBUG SMTP: connected to host "smtp.dreamhost.com", port: 587
EHLO ip-172-31-29-30.us-east-2.compute.internal
250-pdx1-sub0-mail-a290.dreamhost.com
250-PIPELINING
250-SIZE 40960000
250-ETRN
250-STARTTLS
250-AUTH PLAIN LOGIN
250-AUTH=PLAIN LOGIN
250-ENHANCEDSTATUSCODES
250-8BITMIME
250 CHUNKING
DEBUG SMTP: Found extension "PIPELINING", arg ""
DEBUG SMTP: Found extension "SIZE", arg "40960000"
DEBUG SMTP: Found extension "ETRN", arg ""
DEBUG SMTP: Found extension "STARTTLS", arg ""
DEBUG SMTP: Found extension "AUTH", arg "PLAIN LOGIN"
DEBUG SMTP: Found extension "AUTH=PLAIN", arg "LOGIN"
DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
DEBUG SMTP: Found extension "8BITMIME", arg ""
DEBUG SMTP: Found extension "CHUNKING", arg ""
STARTTLS
220 2.0.0 Ready to start TLS
MessagingException
javax.mail.MessagingException: Could not convert socket to TLS
I fixed this by upgrading my JBoss to 7.4.0.
Trying to send emails using SMTPlib in python script on private subnet EC2 machine using following code. EC2 machine has communication with internal SMTP server through PORT 25 , verified using telnet command.
This code works fine from public subnet EC2 but throws error mentioned at the bottom on private subnet.
import smtplib
from email.MIMEMultipart import MIMEMultipart #python 2
msg = MIMEMultipart()
msg['From'] = 'myid#domain.com'
msg['To'] = 'youid#domain.com'
msg['Subject'] = 'simple email in python'
message = 'here is the email'
mailserver = smtplib.SMTP('smtp.gmail.com',25)
mailserver.ehlo()
mailserver.starttls()
mailserver.ehlo()
mailserver.login('myid#domain.com', 'password')
mailserver.sendmail('myid#domain.com','youid#domain.com',msg.as_string())
mailserver.quit()
Getting this error socket.error: errorno[101] - Network is unreachable
do you have a NAT gateway in the private subnet where your smtp is located?
do you have active access control layer on that private subnet where your server is located? Is it blocking anything?
also check ACL rules in public subnet
security group attached to the server, is it open?
Email server configuration was wrong and the email server did not require login.
mailserver = smtplib.SMTP(internal office server,25)
#mailserver.login('myid#domain.com', 'password') -- Not required for the server
Thank you.
I'm using OJS 2.4.8.1, therefore, I want to use the AWS SES SMTP Service, so, I've configured the config file config.inc.php as follow:
; Use SMTP for sending mail instead of mail()
smtp = On
; SMTP server settings
smtp_server = email-smtp.us-east-1.amazonaws.com
smtp_port = 587
; Force the default envelope sender (if present)
; force_default_envelope_sender = On
; Enable SMTP authentication
; Supported mechanisms: PLAIN, LOGIN, CRAM-MD5, and DIGEST-MD5
smtp_auth = PLAIN
smtp_username = XXXXXXXXXX
smtp_password = XXXXXXXXXX/XXXXXXXXX
; Allow envelope sender to be specified
; allow_envelope_sender = On
After sending a test I can view in error_log the following:
OJS SMTPMailer: Could not authenticate
NOTES: the username and password are correct, I tried adding the params with/without quotes, I tried with 25, 465 or 587 ports and nothing works.
Any help is well received.
I have been asked to do some system admin and to move a legacy PHP web application to an Amazon EC2 instance running Debian. I have done this, and emails are successfully being sent from postfix.
Concern was expressed by the previous system admin that the server was not using an email relay, and a request to use SES seemed straight forward. I have implemented a mail relay using Mailgun from a Rackspace instance, and though not trivial, I got this done in a couple of hours.
I have not found the SES process quite so simple, and I suspect this is because I am unfamiliar with using certificates.
Initially I set up the service using the instructions here
http://docs.aws.amazon.com/ses/latest/DeveloperGuide/postfix.html
Elastic IP set up for server
Credentials created for SMTP server
Created IAM user and got a username and password for SMTP at
email-smtp.us-west-2.amazonaws.com
I created an /etc/postfix/sasl_passwd file with
[email-smtp.us-west-2.amazonaws.com]:25 USERNAME:PASSWORD
I then ran
postmap hash:/etc/postfix/sasl_passwd
to create the sasl_passwd.db
/etc/postfix/master.cf did not have smtp_fallback_relay in it
I created a certificate by installing apt-get install sasl2-bin and
openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout server.key -out server.crt
and pointing postfix to this in my main.cf (at the end of this post).
I am using sendmail to send an email via Python
SENDMAIL = "/usr/sbin/sendmail" # sendmail location
FROM = "andy#travelinsurancequotes.com.au"
#TO = ["kirstie#travelinsurancequotes.com.au", "jason#slatescience.com"]
TO = ["jason#slatescience.com"]
SUBJECT = "Artog SMTP server is working!"
TEXT = "Sending emails on the TIQ webserver is working"
# Prepare actual message
message = """\
From: %s
To: %s
Subject: %s
%s
""" % (FROM, ", ".join(TO), SUBJECT, TEXT)
# Send the mail
import os
p = os.popen("%s -f %s -t -i" % (SENDMAIL, FROM), "w")
p.write(message)
status = p.close()
if status:
print "Sendmail exit status", stat
but I keep getting a time out error on sending:
Feb 26 03:18:19 lamp postfix/error[23414]: 5DE3240508: to=<jason#slatescience.com>, relay=none, delay=0.02, delays=0.02/0/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to email-smtp.us-west-2.amazonaws.com[54.187.123.10]:25: Connection timed out
I can connect via port 25
root#lamp /home/www# telnet email-smtp.us-west-2.amazonaws.com 25
Trying 54.149.142.243...
Connected to ses-smtp-us-west-2-prod-14896026.us-west-2.elb.amazonaws.com.
Escape character is '^]'.
220 email-smtp.amazonaws.com ESMTP
My main.cf file is
myhostname = travelinsurancequotes.com.au
mydomain = travelinsurancequotes.com.au
inet_interfaces = all
mynetworks_style = host
local_destination_recipient_limit = 300
local_destination_concurrency_limit = 5
recipient_delimiter=+
smtpd_banner = $myhostname
smtpd_sasl_auth_enable = yes
smtp_sasl_mechanism_filter = plain
smtpd_sasl_local_domain = $myhostname
broken_sasl_auth_clients = yes
smtpd_helo_required = yes
smtp_use_tls = yes
smtpd_use_tls = yes
smtp_tls_note_starttls_offer = yes
smtpd_tls_key_file = /etc/postfix/sslcerts/server.key
smtpd_tls_cert_file = /etc/postfix/sslcerts/server.crt
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom
relayhost = [email-smtp.us-west-2.amazonaws.com]:25
smtp_sasl_auth_enable = yes
smtp_sasl_security_options = noanonymous
smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
smtp_use_tls = yes
smtp_tls_security_level = encrypt
smtp_tls_note_starttls_offer = yes
smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt
AWS EC2 has some sort of limit on mail being sent ..
I had that error, and Amazon Support told me to fill this form out to remove the limit.
https://aws.amazon.com/forms/ec2-email-limit-rdns-request
I hope this helps
I want to use wamp as my development server and I'm trying to send email via my email => gmail, hotmail, yahoo. I'm trying to implement a simple email php application.
Is it possible to do it in wamp?
Is it possible to do it without changing php.ini and instead use ini_set();
I have tried changing my php.ini
using my yahoo mail
SMTP = smtp.mail.yahoo.com
; http://php.net/smtp-port
smtp_port = 587
auth_user = me#yahoo.com
auth_pass = password
and got this error message "Warning: mail() [function.mail]: SMTP server response: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html in C:\wamp\www\9dot_disc_alt\abc.php on line 12"
using gmail
SMTP = smtp.gmail.com
; http://php.net/smtp-port
smtp_port = 587
auth_user = me#gmail.com
auth_pass = password
SMTP server response: 530 5.7.0 Must issue a STARTTLS command first. pc6sm6631754pbc.47 in C:\wamp\www\9dot_disc_alt\abc.php on line 12
Here's my current code:
$to = "me#yahoo.com";
$subject = "Test mail";
$message = "Hello! This is a simple email message.";
$from = "me#my.com";
$headers = "From:" . $from;
mail($to,$subject,$message,$headers);
echo "Mail Sent.";
Sir/Ma'am your answers would be of great help and be very much appreciated. Thank you++
When you use wamp, your SMTP must be your FAI, for example if you have free :
=>SMTP = smtp.free.fr (or .com)
EDIT : You can try this : http://glob.com.au/sendmail/, i's a simple windows console application that emulates sendmail's for wamp for example ;)
I found an online article that allows me to send emails using wamp + php mailer
http://nikunj-solutions.blogspot.com/2011/08/send-email-using-wamp-server.html