I am using Sabre SOAP Api in C#. I got the response from session creation successfully, I added wsdl Service Reference http://webservices.sabre.com/wsdl/tpfc/OTA_AirAvailLLS2.3.0RQ.wsdl to my test project and pass required values to parameters in the request as given in the documentation https://developer.sabre.com/docs/read/soap_apis/air/search/Air_Availability.
this is my code to consume SOAP API
public OTA_AirAvailRS Method(string securitytoken, string convid, string ipcc)
{
try
{
DateTime dt = DateTime.UtcNow;
string tstamp = dt.ToString("s") + "Z";
//Create the message header. Provide the value for the conversation ID, the action code of the Web
//service being called, and the value for wsse:BinarySecurityToken that was returned with
//the SessionCreateRS message.
//This sample calls the OTA_AirAvailLLSRQ Service, and the action code that corresponds to
//this service is OTA_AirAvailLLSRQ.
MessageHeader msgHeader = new MessageHeader();
msgHeader.ConversationId = convid; // Put ConversationId in req header
From from = new From();
PartyId fromPartyId = new PartyId();
PartyId[] fromPartyIdArr = new PartyId[1];
fromPartyId.Value = "WebServiceClient";
fromPartyIdArr[0] = fromPartyId;
from.PartyId = fromPartyIdArr;
msgHeader.From = from;
To to = new To();
PartyId toPartyId = new PartyId();
PartyId[] toPartyIdArr = new PartyId[1];
toPartyId.Value = "WebServiceSupplier";
toPartyIdArr[0] = toPartyId;
to.PartyId = toPartyIdArr;
msgHeader.To = to;
msgHeader.CPAId = ipcc;
msgHeader.Action = "OTA_AirAvailLLSRQ";
Service service = new Service();
service.Value = "AirAvail";
msgHeader.Service = service;
MessageData msgData = new MessageData();
msgData.MessageId = "mid:20001209-133003-2333#clientofsabre.com1";
msgData.Timestamp = tstamp;
msgHeader.MessageData = msgData;
Security1 security = new Security1();
security.BinarySecurityToken = securitytoken; // Put BinarySecurityToken in req header
//Create the request object req and the value for the IPCC in the payload of the request.
OTA_AirAvailRQOriginDestinationInformationFlightSegment seg = new OTA_AirAvailRQOriginDestinationInformationFlightSegment()
{
ArrivalDateTime = "12-21T19:00",
DepartureDateTime = "12-21T18:00",
DestinationLocation = new OTA_AirAvailRQOriginDestinationInformationFlightSegmentDestinationLocation() { LocationCode = "DFW" },
OriginLocation = new OTA_AirAvailRQOriginDestinationInformationFlightSegmentOriginLocation() { LocationCode = "HNL" }
};
OTA_AirAvailRQ req = new OTA_AirAvailRQ();
req.OriginDestinationInformation = new OTA_AirAvailRQOriginDestinationInformation() { FlightSegment = seg };
// req.TimeStamp = tstamp;
// req.OptionalQualifiers.FlightQualifiers.
req.Version="2.3.0";
OTA_AirAvailPortTypeClient c = new OTA_AirAvailPortTypeClient();
OTA_AirAvailRS resp = c.OTA_AirAvailRQ(ref msgHeader, ref security, req);
return resp;
}
catch (Exception e)
{
Console.WriteLine("The file could not be read:");
Console.WriteLine("Exception Stack Trace : " + e.StackTrace);
}
return new OTA_AirAvailRS();
}
its throws an exception Message: ERR.SWS.CLIENT.VALIDATION_FAILED
Stack:
Server stack trace:
at
System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime
operation, ProxyRpc& rpc) at
System.ServiceModel.Channels.ServiceChannel.Call(String action,
Boolean oneway, ProxyOperationRuntime operation, Object[] ins,
Object[] outs, TimeSpan timeout) at
System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation) at
System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
message)
Exception rethrown at [0]: at
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg) at
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at
ConsoleApplication1.ServiceAirAvailLLSReference1.OTA_AirAvailPortType.OTA_AirAvailRQ(OTA_AirAvailRQRequest
request) at
ConsoleApplication1.ServiceAirAvailLLSReference1.OTA_AirAvailPortTypeClient.ConsoleApplication1.ServiceAirAvailLLSReference1.OTA_AirAvailPortType.OTA_AirAvailRQ(OTA_AirAvailRQRequest
request) in e:\ConsoleApplication1\ConsoleApplication1\Service
References\ServiceAirAvailLLSReference1\Reference.cs:line 7012 at
ConsoleApplication1.ServiceAirAvailLLSReference1.OTA_AirAvailPortTypeClient.OTA_AirAvailRQ(MessageHeader&
MessageHeader, Security1& Security, OTA_AirAvailRQ OTA_AirAvailRQ1) in
e:\ConsoleApplication1\ConsoleApplication1\Service
References\ServiceAirAvailLLSReference1\Reference.cs:line 7020 at
ConsoleApplication1.SearchAirAvail.Method(String securitytoken, String
convid, String ipcc) in
e:\ConsoleApplication1\ConsoleApplication1\SearchAirAvail.cs:line 115
Please Help Me
I found the answer of this question..
Just comment
//ArrivalDateTime = "12-21T19:00"
This field is not required for request
Related
I am using soap service to authenticate request by sabre as in the document https://developer.sabre.com/docs/read/soap_basics/Authentication.
I generate the proxy classes using wsdl. i put authentication credential in the code. This is my Code for test purpose:
using ConsoleApplication1.SessionReference1;
using System;
using System.Collections.Generic;
using System.Diagnostics;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace ConsoleApplication1
{
class Program
{
[STAThread]
static void Main(string[] args)
{
try
{
// Set user information, including security credentials and the IPCC.
string username = "my-username";
string password = "my-password";
string ipcc = "not-understand";
string domain = "EXT";
string temp = Environment.GetEnvironmentVariable("tmp"); // Get temp directory
string PropsFileName = temp + "/session.properties"; // Define dir and file name
DateTime dt = DateTime.UtcNow;
string tstamp = dt.ToString("s") + "Z";
//Create the message header and provide the conversation ID.
MessageHeader msgHeader = new MessageHeader();
msgHeader.ConversationId = "TestSession"; // Set the ConversationId
From from = new From();
PartyId fromPartyId = new PartyId();
PartyId[] fromPartyIdArr = new PartyId[1];
fromPartyId.Value = "WebServiceClient";
fromPartyIdArr[0] = fromPartyId;
from.PartyId = fromPartyIdArr;
msgHeader.From = from;
To to = new To();
PartyId toPartyId = new PartyId();
PartyId[] toPartyIdArr = new PartyId[1];
toPartyId.Value = "WebServiceSupplier";
toPartyIdArr[0] = toPartyId;
to.PartyId = toPartyIdArr;
msgHeader.To = to;
//Add the value for eb:CPAId, which is the IPCC.
//Add the value for the action code of this Web service, SessionCreateRQ.
msgHeader.CPAId = ipcc;
msgHeader.Action = "SessionCreateRQ";
Service service = new Service();
service.Value = "SessionCreate";
msgHeader.Service = service;
MessageData msgData = new MessageData();
msgData.MessageId = "mid:20001209-133003-2333#clientofsabre.com1";
msgData.Timestamp = tstamp;
msgHeader.MessageData = msgData;
Security security = new Security();
SecurityUsernameToken securityUserToken = new SecurityUsernameToken();
securityUserToken.Username = username;
securityUserToken.Password = password;
securityUserToken.Organization = ipcc;
securityUserToken.Domain = domain;
security.UsernameToken = securityUserToken;
SessionCreateRQ req = new SessionCreateRQ();
SessionCreateRQPOS pos = new SessionCreateRQPOS();
SessionCreateRQPOSSource source = new SessionCreateRQPOSSource();
source.PseudoCityCode = ipcc;
pos.Source = source;
req.POS = pos;
SessionCreatePortTypeClient s = new SessionCreatePortTypeClient();
SessionCreateRS resp = s.SessionCreateRQ(ref msgHeader, ref security, req);
//SessionCreateRQService serviceObj = new SessionCreateRQService();
//serviceObj.MessageHeaderValue = msgHeader;
//serviceObj.SecurityValue = security;
//SessionCreateRS rs = new SessionCreateRS();
//SessionCreateRS = serviceObj.SessionCreateRQ(req); // Send the request
if (resp.Errors != null && resp.Errors.Error != null)
{
Console.WriteLine("Error : " + resp.Errors.Error.ErrorInfo.Message);
}
else
{
// msgHeader = serviceObj.MessageHeaderValue;
// security = serviceObj.SecurityValue;
Console.WriteLine("**********************************************");
Console.WriteLine("Response of SessionCreateRQ service");
Console.WriteLine("BinarySecurityToken returned : " + security.BinarySecurityToken);
Console.WriteLine("**********************************************");
string ConvIdLine = "convid=" + msgHeader.ConversationId; // ConversationId to a string
string TokenLine = "securitytoken=" + security.BinarySecurityToken; // BinarySecurityToken to a string
string ipccLine = "ipcc=" + ipcc; // IPCC to a string
// File.Delete(PropsFileName); // Clean up
// TextWriter tw = new StreamWriter(PropsFileName); // Create & open the file
// tw.WriteLine(DateTime.Now); // Write the date for reference
// tw.WriteLine(TokenLine); // Write the BinarySecurityToken
// tw.WriteLine(ConvIdLine); // Write the ConversationId
// tw.WriteLine(ipccLine); // Write the IPCC
// tw.Close();
//Console.Read();
}
}
catch (Exception e)
{
Console.WriteLine("Exception Message : " + e.Message);
Console.WriteLine("Exception Stack Trace : " + e.StackTrace);
Console.Read();
}
}
}
}
Please Help me
I didn't check the sequence of the code in detail, but checking the values you set for organization and domain:
string ipcc = "not-understand";
string domain = "EXT";
Unless you did it intentionally to mask the values, you should have received your ipcc value from Sabre after getting a SOAP webservices account.
The value for SOAP APIs domain is normally "DEFAULT".
Registering on dev studio only gives you REST test credentials (not SOAP), so you can use this form to request SOAP test credentials:
https://developer.sabre.com/contact
Finally, I don't quite see the environment/target url you're using to test the SessionCreate service...CERT one is: https://sws3-crt.cert.sabre.com/
I am using apache commons httpclient version 4.2 to execute a simple web service based on SOAP 1.2. I am able to fire the web service properly through SOAP UI but I am unable to do the same using Java.
Following is the method I'm using to invoke the service.
private static byte[] callSOAPServer(String body, String SOAP_ACTION,
String SERVER_URL) {
byte[] result = null;
HttpParams httpParameters = new BasicHttpParams();
// Set the timeout in milliseconds until a connection is established.
int timeoutConnection = 15000;
HttpConnectionParams.setConnectionTimeout(httpParameters,
timeoutConnection);
// Set the default socket timeout (SO_TIMEOUT)
// in milliseconds which is the timeout for waiting for data.
int timeoutSocket = 35000;
HttpConnectionParams.setSoTimeout(httpParameters, timeoutSocket);
DefaultHttpClient httpclient = new DefaultHttpClient(httpParameters);
/*
* httpclient.getCredentialsProvider().setCredentials( new
* AuthScope("os.icloud.com", 80, null, "Digest"), new
* UsernamePasswordCredentials(username, password));
*/
HttpPost httppost = new HttpPost(SERVER_URL);
httppost.setHeader("soapaction", SOAP_ACTION);
httppost.setHeader("Content-Type", "text/xml; charset=utf-8");
System.out.println("executing request" + httppost.getRequestLine());
// now create a soap request message as follows:
final StringBuffer soap = new StringBuffer();
soap.append("\n");
soap.append("");
// this is a sample data..you have create your own required data BEGIN
soap.append(" \n");
soap.append(" \n");
soap.append("" + body);
soap.append(" \n");
soap.append(" \n");
/* soap.append(body); */
// END of MEssage Body
soap.append("");
System.out.println("SOAP Request : " + soap.toString());
// END of full SOAP request message
try {
HttpEntity entity = new StringEntity(soap.toString(), HTTP.UTF_8);
httppost.setEntity(entity);
HttpResponse response = httpclient.execute(httppost);// calling
// server
HttpEntity r_entity = response.getEntity(); // get response
System.out.println("Reponse Header:Begin..."); // response headers
System.out.println("Reponse Header StatusLine:"
+ response.getStatusLine());
Header[] headers = response.getAllHeaders();
for (Header h : headers) {
System.out.println("Reponse Header " + h.getName() + ": "
+ h.getValue());
}
System.out.println("Reponse Header END...");
if (r_entity != null) {
result = new byte[(int) r_entity.getContentLength()];
if (r_entity.isStreaming()) {
DataInputStream is = new DataInputStream(
r_entity.getContent());
is.readFully(result);
}
}
} catch (Exception E) {
System.out.println("Exception While Connecting " + E.getMessage());
E.printStackTrace();
}
httpclient.getConnectionManager().shutdown(); // shut down the
// connection
return result;
}
Following is my SOAP Request as well as the end point.
String soapRequest = "<soap:Envelope xmlns:soap=\"http://www.w3.org/2003/05/soap-envelope\" xmlns:typ=\"http://skash.service.sahaj.com/types/\">"
+ "<soap:Header/>"
+ "<soap:Body>"
+ "<typ:remoteSKASHDeductionElement>"
+ "<typ:vleId>?</typ:vleId>"
+ "<typ:paidAmt>?</typ:paidAmt>"
+ "<typ:refTxnId>?</typ:refTxnId>"
+ "</typ:remoteSKASHDeductionElement>"
+ "</soap:Body>"
+ "</soap:Envelope>";
String soapEndPoint = "http://xxx.xxx.xxx.xxx:xxxx/skashws/remoteSKASHDeductionSoap12HttpPort";
String soapAction = "http://xxx.xxx.xxx.xxx:xxxx//remoteSKASHDeduction";
// executeSOAPRequest(soapRequest, soapEndPoint, soapAction);
byte[] resp = callSOAPServer(soapRequest, soapAction, soapEndPoint);
System.out.println(IOUtils.toString(resp));
I can see that the namespace set to Envelope tag is for SOAP 1.2 and is well set. I am not sure where I'm going wrong. I am receiving the following version mismatch error.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header>
<env:Upgrade>
<env:SupportedEnvelope xmlns:soap12="http://www.w3.org/2003/05/soap-envelope" qname="soap12:Envelope"/>
</env:Upgrade>
</env:Header>
<env:Body>
<env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>env:VersionMismatch</faultcode>
<faultstring>Version Mismatch</faultstring>
<faultactor>http://schemas.xmlsoap.org/soap/actor/next</faultactor>
</env:Fault>
</env:Body>
you may use this code block
public class GenericSoapMessageFactory extends SaajSoapMessageFactory implements InitializingBean {
#Override
public SaajSoapMessage createWebServiceMessage(InputStream inputStream) throws IOException {
setMessageFactoryForRequestContext(soap11);
if (inputStream instanceof TransportInputStream) {
TransportInputStream transportInputStream = (TransportInputStream) inputStream;
if (soapProtocolChooser.useSoap12(transportInputStream)) {
setMessageFactoryForRequestContext(soap12);
}
}
SaajSoapMessageFactory mf = getMessageFactoryForRequestContext();
return mf.createWebServiceMessage(inputStream);
}
}
And web.xml params
<servlet>
<servlet-name>spring-ws2</servlet-name>
<servlet-class>org.springframework.ws.transport.http.MessageDispatcherServlet</servlet-class>
<init-param>
<param-name>messageFactoryBeanName</param-name>
<param-value>genericSoapMessageFactory</param-value>
</init-param>
</servlet>
I saw this error once and I changed the following line;
httppost.setHeader("Content-Type", "text/xml; charset=utf-8");
to
httppost.setHeader("Content-Type", "application/soap+xml;charset=UTF-8;");
and it fixed the issue. Try it.
I'm fairly new to webservices and working through a SAAJ example of sending and recieving attachments (binary files). I can get it to work when the client sends the file but not when it requests it. I get an exception on the client side:
ERROR: 'Content is not allowed in prolog.'
24-Oct-2012 13:59:28 com.sun.xml.internal.messaging.saaj.soap.EnvelopeFactory createEnvelope
SEVERE: SAAJ0511: Unable to create envelope from given source
com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Unable to create envelope from given source
Anybody have any ideas???my client code is as follows:
SOAPConnectionFactory scf = SOAPConnectionFactory.newInstance();
SOAPConnection con = scf.createConnection();
SOAPFactory soapFactory = SOAPFactory.newInstance();
MessageFactory mf = MessageFactory.newInstance();
SOAPMessage msg = mf.createMessage();
SOAPHeader header = msg.getSOAPHeader();
header.detachNode();
SOAPBody body = msg.getSOAPBody();
Name bodyName = soapFactory.createName(
"remoteOpen", "remoteOpen",
"http://schemas.remoteOpen.com/remoteOpen");
SOAPBodyElement bodyElement = body.addBodyElement(bodyName);
SOAPElement projectName = bodyElement.addChildElement("projectName");
projectName.addTextNode("filename");
msg.saveChanges();
// create the endpoint and send the message
URL endpoint = new URL("http://localhost:8080/RemoteSaveProject/OpenServlet");
SOAPMessage response = con.call(msg, endpoint);
con.close();
SOAPBody responseBody = response.getSOAPBody();
SOAPElement ackElem = (SOAPElement)responseBody.getFirstChild();
String acknowledgement = ackElem.getValue();
the server code looks like this:
MimeHeaders mimeHeaders = new MimeHeaders();
Enumeration en = request.getHeaderNames();
while (en.hasMoreElements())
{
String headerName = (String)en.nextElement();
String headerVal = request.getHeader(headerName);
StringTokenizer tk = new StringTokenizer(headerVal, ",");
while (tk.hasMoreTokens()){
mimeHeaders.addHeader(headerName, tk.nextToken().trim());
}
}
SOAPMessage message = mf.createMessage(mimeHeaders, request.getInputStream());
SOAPBody body = message.getSOAPBody();
Name bodyName = soapFactory.createName(
"remoteOpen", "remoteOpen",
"http://schemas.remoteOpen.com/remoteOpen");
Iterator projects = body.getChildElements(bodyName);
SOAPElement project = (SOAPElement)projects.next();
Iterator projectNameIter = project.getChildElements(soapFactory.createName("projectName"));
SOAPElement projectNameEle = (SOAPElement)projectNameIter.next();
String projectName = projectNameEle.getValue();
File file = new File(projectName);
SOAPMessage reply = mf.createMessage();
SOAPHeader header = reply.getSOAPHeader();
header.detachNode();
SOAPBody replyBody = reply.getSOAPBody();
SOAPBodyElement bodyElement = replyBody.addBodyElement(soapFactory.createName("ack"));
bodyElement.addTextNode("OK");
DataHandler dh = new DataHandler(new FileDataSource(file));
AttachmentPart attachment = reply.createAttachmentPart(dh);
attachment.setContentId("123");
reply.addAttachmentPart(attachment);
reply.saveChanges();
response.setStatus(HttpServletResponse.SC_OK);
putHeaders(reply.getMimeHeaders(), response);
response.setContentType("text/xml");
ServletOutputStream replyOS = response.getOutputStream();
reply.writeTo(replyOS);
replyOS.flush();
replyOS.close();
putHeaders looks like:
Iterator it = headers.getAllHeaders();
while (it.hasNext())
{
MimeHeader header = (MimeHeader) it.next();
String[] values = headers.getHeader(header.getName());
if (values.length == 1)
{
res.setHeader( header.getName(), header.getValue());
}
else
{
StringBuffer concat = new StringBuffer();
int i = 0;
while (i < values.length)
{
if (i != 0)
{
concat.append(',');
}
concat.append(values[i++]);
}
res.setHeader(header.getName(), concat.toString());
}
}
If you are using Google app engine, like me, the problem is that GAE doesn't support com.sun.xml.internal.messaging.saaj.packaging.mime.internet.ParameterList which is used internally somewhere in the call chain of javax.xml.soap.SOAPConnection.call(). So you must use a workaround.
I personally did it by using java.net.HttpURLConnection instead of javax.xml.soap.SOAPConnection and manually sending and parsing SOAP messages.
I have been trying to implement a video upload facebook feature for my mobile app for a while now but never really succeeded with rest. I learnt yesterday that the graph alternative was available.
After getting a few errors to do with access key mainly i have gotten to the point where output stream succesfully writes the movie file and the input stream just receives an empty json array once i have written the 3gp file.
Anyone any idea why I would get an empty json array and no video gets published when i get all my code to run, i get 200 response code and the server sends me a non error response?
Any help greatly appreciated.
Here is the class that gets the blank json array (send method). I have appended the token to the url and in the table to be sure. I am sorry if the code is untidy buts it just been a day of trial and error.
import java.io.ByteArrayOutputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Enumeration;
import java.util.Hashtable;
import javax.microedition.io.Connector;
import javax.microedition.io.HttpConnection;
import net.rim.device.api.io.http.HttpProtocolConstants;
public class HttpMultipartRequest2
{
static final String BOUNDARY = "----------V2ymHFg03ehbqgZCaKO6jy";
byte[] postBytes = null;
String url = null;
Hashtable paramsTable;
public HttpMultipartRequest2(String url, Hashtable params,
String fileField, String fileName, String fileType, byte[] fileBytes) throws Exception
{
this.url = url;
String boundary = getBoundaryString();
paramsTable = params;
String boundaryMessage = getBoundaryMessage(boundary, params, fileField, fileName, fileType);
String endBoundary = "\r\n--" + boundary + "--\r\n";
ByteArrayOutputStream bos = new ByteArrayOutputStream();
bos.write(boundaryMessage.getBytes());
bos.write(fileBytes);
bos.write(endBoundary.getBytes());
this.postBytes = bos.toByteArray();
bos.close();
}
String getBoundaryString() {
return BOUNDARY;
}
String getBoundaryMessage(String boundary, Hashtable params, String fileField, String fileName, String fileType)
{
StringBuffer res = new StringBuffer("--").append(boundary).append("\r\n");
Enumeration keys = params.keys();
while(keys.hasMoreElements())
{
String key = (String)keys.nextElement();
String value = (String)params.get(key);
res.append("Content-Disposition: form-data; name=\"").append(key).append("\"\r\n")
.append("\r\n").append(value).append("\r\n")
.append("--").append(boundary).append("\r\n");
}
res.append("Content-Disposition: form-data; name=\"").append(fileField)
.append("\"; filename=\"").append(fileName).append("\"\r\n")
.append("Content-Type: ").append(fileType).append("\r\n\r\n");
Log.info(("res "+res.toString()));
return res.toString();
}
public String send() throws Exception
{
StringBuffer sb = new StringBuffer();
HttpConnection hc = null;
InputStream is = null;
ByteArrayOutputStream bos = new ByteArrayOutputStream();
byte[] res = null;
try
{
Log.info("before hc open"+ url);
hc = (HttpConnection) Connector.open(url);
hc.setRequestProperty("Content-Type", "multipart/form-data; boundary=" + getBoundaryString());
hc.setRequestProperty("access_token", (String)paramsTable.get("access_token"));
hc.setRequestProperty(HttpProtocolConstants.HEADER_CONTENT_LENGTH, String.valueOf(postBytes.length));
hc.setRequestProperty( "x-rim-transcode-content", "none" );
ByteArrayOutputStream out = new ByteArrayOutputStream();
OutputStream dos = hc.openOutputStream();
is = hc.openInputStream();
Log.info("before dos write responsecode");// + hc.getResponseCode());
out.write(postBytes, 0, postBytes.length);
//Log.info("flushing"+ hc.getResponseCode());
Log.info("after doswrite responsecode");
dos.write(out.toByteArray());
dos.flush();
Log.info("after flush");
if(dos!=null)
dos.close();
int ch;
Log.info("before openinput ");
Log.info("after openinput ");
while ((ch = is.read()) != -1)
{
bos.write(ch);
sb.append((char)ch);
Log.info("char"+(char)ch);
}
res = bos.toByteArray();
Log.info("Response recieved from Server is : " + sb.toString() );
}
catch(Exception e)
{
Log.info(hc.getResponseCode() + "sexce"+e);
}
catch(OutOfMemoryError error)
{
Log.info("outofmemory " + error);
System.gc();
}
finally
{
try
{
if(bos != null)
bos.close();
if(is != null)
is.close();
if(hc != null)
hc.close();
}
catch(Exception e2)
{
Log.info("finally exception"+ e2);
}
}
return sb.toString();
}
}
Are you trying to upload to a user's feed or to a page? There is an Open Bug regarding posting to pages.
Also, could you post some code?
Assuming that you've read the documentation:
Facebook Graph API->Video
And that you are using graph-video.facebook.com, not graph.facebook.com.
I would like to call .Net webservice from my Blackbrry application. How can I call webservice from my app and which protocol is user and which jar file i have to used to call webservice. and how to get responce from webservice in Blackberry?
you can use something like this (you probably need to setup correct request headers and cookies):
connection = (HttpConnection) Connector.open(url
+ ConnectionUtils.getConnectionString(), Connector.READ_WRITE);
connection.setRequestProperty("ajax","true");
connection.setRequestProperty("Cookie", "JSESSIONID=" + jsessionId);
inputStream = connection.openInputStream();
byte[] responseData = new byte[10000];
int length = 0;
StringBuffer rawResponse = new StringBuffer();
while (-1 != (length = inputStream.read(responseData))) {
rawResponse.append(new String(responseData, 0, length));
}
int responseCode = connection.getResponseCode();
if (responseCode != HttpConnection.HTTP_OK) {
throw new IOException("HTTP response code: " + responseCode);
}
responseString = rawResponse.toString();