I am seeking advice on what's the best way to design this -
Use Case
I want to put multiple files into S3. Once all files are successfully saved, I want to trigger a lambda function to do some other work.
Naive Approach
The way I am approaching this is by saving a record in Dynamo that contains a unique identifier and the total number of records I will be uploading along with the keys that should exist in S3.
A basic implementation would be to take my existing lambda function which is invoked anytime my S3 bucket is written into, and have it check manually whether all the other files been saved.
The Lambda function would know (look in Dynamo to determine what we're looking for) and query S3 to see if the other files are in. If so, use SNS to trigger my other lambda that will do the other work.
Edit: Another approach is have my client program that puts the files in S3 be responsible for directly invoking the other lambda function, since technically it knows when all the files have been uploaded. The issue with this approach is that I do not want this to be the responsibility of the client program... I want the client program to not care. As soon as it has uploaded the files, it should be able to just exit out.
Thoughts
I don't think this is a good idea. Mainly because Lambda functions should be lightweight, and polling the database from within the Lambda function to get the S3 keys of all the uploaded files and then checking in S3 if they are there - doing this each time seems ghetto and very repetitive.
What's the better approach? I was thinking something like using SWF but am not sure if that's overkill for my solution or if it will even let me do what I want. The documentation doesn't show real "examples" either. It's just a discussion without much of a step by step guide (perhaps I'm looking in the wrong spot).
Edit In response to mbaird's suggestions below-
Option 1 (SNS) This is what I will go with. It's simple and doesn't really violate the Single Responsibility Principal. That is, the client uploads the files and sends a notification (via SNS) that its work is done.
Option 2 (Dynamo streams) So this is essentially another "implementation" of Option 1. The client makes a service call, which in this case, results in a table update vs. a SNS notification (Option 1). This update would trigger the Lambda function, as opposed to notification. Not a bad solution, but I prefer using SNS for communication rather than relying on a database's capability (in this case Dynamo streams) to call a Lambda function.
In any case, I'm using AWS technologies and have coupling with their offering (Lambda functions, SNS, etc.) but I feel relying on something like Dynamo streams is making it an even tighter coupling. Not really a huge concern for my use case but still feels dirty ;D
Option 3 with S3 triggers My concern here is the possibility of race conditions. For example, if multiple files are being uploaded by the client simultaneously (think of several async uploads fired off at once with varying file sizes), what if two files happen to finish uploading at around the same time, and two or more Lambda functions (or whatever implementations we use) query Dynamo and gets back N as the completed uploads (instead of N and N+1)? Now even though the final result should be N+2, each one would add 1 to N. Nooooooooooo!
So Option 1 wins.
If you don't want the client program responsible for invoking the Lambda function directly, then would it be OK if it did something a bit more generic?
Option 1: (SNS) What if it simply notified an SNS topic that it had completed a batch of S3 uploads? You could subscribe your Lambda function to that SNS topic.
Option 2: (DynamoDB Streams) What if it simply updated the DynamoDB record with something like an attribute record.allFilesUploaded = true. You could have your Lambda function trigger off the DynamoDB stream. Since you are already creating a DynamoDB record via the client, this seems like a very simple way to mark the batch of uploads as complete without having to code in knowledge about what needs to happen next. The Lambda function could then check the "allFilesUploaded" attribute instead of having to go to S3 for a file listing every time it is called.
Alternatively, don't insert the DynamoDB record until all files have finished uploading, then your Lambda function could just trigger off new records being created.
Option 3: (continuing to use S3 triggers) If the client program can't be changed from how it works today, then instead of listing all the S3 files and comparing them to the list in DynamoDB each time a new file appears, simply update the DynamoDB record via an atomic counter. Then compare the result value against the size of the file list. Once the values are the same you know all the files have been uploaded. The down side to this is that you need to provision enough capacity on your DynamoDB table to handle all the updates, which is going to increase your costs.
Also, I agree with you that SWF is overkill for this task.
Related
I am interested in doing automated real-time data processing on AWS using Lambda and I am not certain about how I can trigger my Lambda function. My data processing code involves taking multiple files and concatenating them into a single data frame after performing calculations on each file. Since files are uploaded simultaneously onto S3 and files are dependent on each other, I would like the Lambda to be only triggered when all files are uploaded.
Current Approaches/Attempts:
-I am considering an S3 trigger, but my concern is that an S3 Trigger will result in an error in the case where a single file upload triggers the Lambda to start. An alternate option would be adding a wait time but that is not preferred to limit the computation resources used.
-A scheduled trigger using Cloudwatch/EventBridge, but this would not be real-time processing.
-SNS trigger, but I am not certain if the message can be automated without knowing the completion in file uploads.
Any suggestion is appreciated! Thank you!
If you really cannot do it with a scheduled function, the best option is to trigger a Lambda function when an object is created.
The tricky bit is that it will fire your function on each object upload. So you either can identify the "last part", e.g., based on some meta data, or you will need to store and track the state of all uploads, e.g. in a DynamoDB, and do the actual processing only when a batch is complete.
Best, Stefan
Your file coming in parts might be named as -
filename_part1.ext
filename_part2.ext
If any of your systems is generating those files, then use the system to generate a final dummy blank file name as -
filename.final
Since in your S3 event trigger you can use a suffix to generate an event, use .final extension to invoke lambda, and process records.
In an alternative approach, if you do not have access to the server putting objects to your s3 bucket, then with each PUT operation in your s3 bucket, invoke the lambda and insert an entry in dynamoDB.
You need to put a unique entry per file (not file parts) in dynamo with -
filename and last_part_recieved_time
The last_part_recieved_time keeps getting updated till you keep getting the file parts.
Now, this table can be looked up by a cron lambda invocation which checks if the time skew (time difference between SYSTIME of lambda invocation and dynamoDB entry - last_part_recieved_time) is enough to process the records.
I will still prefer to go with the first approach as the second one still has a chance for error.
Since you want this to be as real time as possible, perhaps you could just perform your logic every single time a file is uploaded, updating the version of the output as new files are added, and iterating through an S3 prefix per grouping of files, like in this other SO answer.
In terms of the architecture, you could add in an SQS queue or two to make this more resilient. An S3 Put Event can trigger an SQS message, which can trigger a Lambda function, and you can have error handling logic in the Lambda function that puts that event in a secondary queue with a visibility timeout (sort of like a backoff strategy) or back in the same queue for retries.
I have the following requirements:
For every deleted record in RDS we need to archive it into somewhere cheaper on AWS.
Reduce storage cost
Not using Glacier
Context oriented (e.g. a file per table)
re-import is not a requirement
I'm not an experienced user with AWS, so I'm still a bit lost among the amount of options it has to offer and I'd like to know if you have more ideas to help me clear it out.
Initial thoughts:
The microservice that deletes the record, might send it to a broker (RabbitMQ for e.g.) and another microservice (let's call it archiver) will listen to it, write into a file, zip and send to S3. This approach has some technical challenges though: in order to make sense create big files, I need to wait the queue to growth a bit, wrap it into a stream and zip inside S3. The transaction control is very weak as well, since file writing and ack on messages are signal based i.e. I'll remove the messages from the broker just after the file is created.
Add a new column to the "archiveble" tables as "deleted (bool)" and run a separate job fetching only those records and saving them into S3. Discarded they don't want the new microservice with access to other's databases.
Following the same approach as in the first item, but instead of save into S3, save into a cheaper database. SimpleDB?
option 1, but instead of rabbitmq, write it to a kinesis firehose and direct that to an s3 location - it doesn't get much cheaper or easier than that.
I have a client that performs a weekly data upload of 3 CSV files to an S3 bucket, always within (at most) 5 minutes of each other. I have python code that ingests the 3 files, aggregates them, and writes and output that I would like to use to create a lambda function to fully automate this job. The issue is that I can't configure an S3 trigger that is every 3 object creates. I could have the lambda trigger every upload and exit until the 3 files are there but I don't want to do that as it's not really cost effective.
So I came across this question here that suggested having an SNS Topic that gets notified after a batch of uploads is completed, however I'm having trouble figuring out how to configure that. Basically what I'd like to do is create something similar to a CloudWatch Alarm that triggers when 3 object PUTS have occurred within 5 minutes of each other. Is this possible? Or, how can I configure my SNS event in a way as is suggested in the linked question?
I think you are misreading the answer in the post you linked. The SNS option is literally someone just sending an SNS message after they have pushed their batch of files to S3. So the sender would need to update their process to include a new SNS message step.
Option 3 in that question/answer is about using S3 triggers to handle this in an automatic fashion, without the sender needing to do any extra steps besides upload files, but it is also much more complicated since it involves using a DynamoDB table with Atomic Counters to ensure the files aren't processed multiple times.
I would like to point out that your concern over the cost effectiveness of triggering a Lambda function for each S3 object is going to be on the order of a few pennies a month, maybe less.
I have a Lambda function that gets triggered whenever an object is created in s3 bucket.
Now, I need to trigger the Lambda for alternate object creation.
Lambda should not be triggered when object is created for the first, third , fifth and so on time. But, Lambda should be triggered for the second, fourth, sixth and so on time.
For this, I created an s3 event for 'PUT' operation.
The first time I used the PUT API. The second time I uploaded the file using -
s3_res.meta.client.upload_file
I thought that it would not trigger lambda since this was upload and not PUT. But this also triggered the Lambda.
Is there any way for this?
The reason that meta.client.upload_file is triggering your PUT event lambda is because it is actually using PUT.
upload_file (docs) uses the TransferManager client, which uses PUT under-the-hood (you can see this in the code: https://github.com/boto/s3transfer/blob/develop/s3transfer/upload.py)
Looking at the AWS-SDK you'll see that POST'ing to S3 is pretty much limited to when you want to give a browser/client a pre-signed URL for them to upload a file to. (https://docs.aws.amazon.com/AmazonS3/latest/API/RESTObjectPOST.html)
If you want to count the number of times PUT has been called, in order to take action on every even call, then the easiest thing to do is to use something like DynamoDB to create a table of 'file-name' vs 'put-count' which you update with every PUT and action accordingly.
Alternatively you could enable bucket file versioning. Then you could use list_object_versions to see how many times the file has been updated. Although you should be aware that S3 is eventually consistent, so this may not be accurate if the file is being rapidly updated.
I've written a function in Python that uploads a folder and its content to S3. Now I would like S3 to generate an event (so I can send it to a lambda function). S3 allows to generate events only at file level, in fact folders on s3 are just a visualization layer, which means that S3 has no internal representation for folders, keys with the same root are simply grouped together. That said, as for now I've come up with three approaches that revolves around the idea of a 'poison pill'.
Send a special file at the end of the folder upload process, the creation of which sends an event to lambda that can open the file to read custom directives to act on. Seems that this approach is quite flexible, however it poses serious concerns security-wise (I know that ACLs are in place for this reason but I'm not quite sure if it's enough), and generates some overhead while downloading/uploading/deleting the file from/to local memory.
Map an event to the target lambdas and fire it directly. The difference in approaches is simply that in this case I'm not really creating a file on S3, I'm just making S3 believe so. I would use CloudWatch to fire custom S3-object-created events with the name of the folder for lambda to pick up. This approach feels a little more hacky than the other two, plus when I did my research on the matter it seemed like it shouldn't be possible to generate "mock" events on AWS (i.e. Trigger S3 create event). To my understanding however, the function put_events should do the trick.
Using SQS would allow to put the folder name into an SQS task that can be later consumed by lambda. This has some advantages over the other two approaches, since SQS has now a LIFO variant that allows for exactly-once-delivery, failures reprocessing (via dead letters queue), etc, however this generates a non-trivial amount of complexity compared to the other approaches.
At this point I'm trying to opt for the most 'correct' approach, and
in order to do so I'm trying to weight pros and cons to make an informed decision, which led me to some questions:
Is there another way I'm missing out to proceed that does not involve client notification ? (all the aforementioned approaches rely on the client sending the notification in one way or another, which is not very "cloudy")?
Is there a substantial difference between approaches 2 and 3, considering that both rely on sending the information in and out of a stream (CloudWatch and SQS respectively)?
Have you consider using the prefix option of S3 bucket event, I tested it and it worked fine. In my S3 bucket I created two folder test1 and test2. On s3 event I added prefix test1 with that in place every time put/copy operation happen on bucket lambda is trigger.
I think your question nets down to "how can I trigger a Lambda function after I have uploaded a folder full of files to S3?"
Unless you have some information a priori server-side that you can use to determine when the folder upload has completed, the client is going to have to tell you.
Options I would consider:
change your client to publish a message to SNS or to SQS upon the completion of uploading to S3. That message can then trigger your Lambda function.
after the last file has been uploaded to folder images/dogs/, upload a zero-sized object whose key is the same as the folder (images/dogs/). This is a 'sentinel file'. Use an S3 event trigger with suffix of / to detect the upload of that 'folder' object and trigger your Lambda.
I prefer the 1st option. It achieves the end goal without resulting in extraneous S3 objects. With SNS you can also configure multiple downstream processes in response to the ‘finished upload’ message (a fan out) if needed.