I try to get email from gmail:
box = poplib.POP3_SSL('pop.gmail.com')
print box.getwelcome()
print box.user(user)
print box.pass_(password)
print box.list()
but I get:
+OK Gpop ready for requests from #######
+OK send PASS
+OK Welcome.
('+OK 0 messages (0 bytes)', [], 0)
and my gmail not empty. What wrong?
python ver 2.7
https://gist.github.com/robulouski/7441883
This will surely help you to fetch the mails from gmail.
try out.
Related
I have SOAPUI project with 10 test cases in Jenkins. I set up Jenkins to send me email with information from console output (log). I have set up email notification content as HTML (text/html).
I have this log in console output in Jenkins:
07:25:05,957 INFO [SoapUITestCaseRunner] Running SoapUI testcase [Login with username and password]
07:25:05,957 INFO [SoapUITestCaseRunner] running step [Clear access token]
07:25:05,957 INFO [log] Environment URL: url.test.environment
07:25:05,958 INFO [SoapUITestCaseRunner] running step [Retrieve accessToken]
07:25:05,959 DEBUG [HttpClientSupport$SoapUIHttpClient] Stale connection check
07:25:05,960 DEBUG [HttpClientSupport$SoapUIHttpClient] Attempt 1 to execute request
07:25:05,960 DEBUG [SoapUIMultiThreadedHttpConnectionManager$SoapUIDefaultClientConnection] Sending request: POST /api/v2/path HTTP/1.1
07:25:06,010 DEBUG [SoapUIMultiThreadedHttpConnectionManager$SoapUIDefaultClientConnection] Receiving response: HTTP/1.1 200
07:25:06,011 DEBUG [HttpClientSupport$SoapUIHttpClient] Connection can be kept alive indefinitely
07:25:06,017 INFO [SoapUITestCaseRunner] Assertion [JsonPath Existence Match] has status VALID
07:25:06,017 INFO [SoapUITestCaseRunner] Assertion [Valid HTTP Status Codes] has status VALID
07:25:06,017 INFO [SoapUITestCaseRunner] Assertion [JsonPath Existence Match 1] has status VALID
07:25:06,017 INFO [SoapUITestCaseRunner] Assertion [JsonPath Existence Match 2] has status VALID
07:25:06,017 INFO [SoapUITestCaseRunner] running step [Pass accessToken]
07:25:06,019 INFO [SoapUITestCaseRunner] Finished running SoapUI testcase [Login with username and password], time taken: 51ms, status: FINISHED
I have set up Jenkins to send email just with this line from log:
07:25:06,019 INFO [SoapUITestCaseRunner] Finished running SoapUI testcase [Login with username and password], time taken: 51ms, status: FINISHED
To that I use this regex to find just that line:
<pre>${BUILD_LOG_REGEX, regex="Finished running SoapUI testcase \\[Login with username and password\\]", showTruncatedLines=false}</pre>
But I want to have in email notification just parts of that line, something like this:
"Login with username and password: FINISHED"
or
"Login with username and password: FAILED"
Is there any way to send email with just part of that line?
Thanks to Aaron I found a solution.
Now I use this regex:
<b>Login with username and password: </b> <font color="green">${BUILD_LOG_REGEX, regex=".*Finished running SoapUI testcase \\[Login with username and password\\].*status: FINISHED", showTruncatedLines=false, substText="SUCCESS"}</font>
<font color="red">${BUILD_LOG_REGEX, regex=".*Finished running SoapUI testcase \\[Login with username and password\\].*status: FAILED", showTruncatedLines=false, substText="FAILED"}</font>
E-mail notification now looks like this:
Login with username and password: SUCCESS
or this:
Login with username and password: FAILED
"SUCCESS" text has green color and "FAILED" text has red color
It seems like you can use a substText argument to define a replacement pattern :
<pre>${BUILD_LOG_REGEX, regex="Finished running SoapUI testcase \\[Login with username and password\\].*status: ([A-Z]+)", showTruncatedLines=false, substText="Login with username and password : \\1"}</pre>
This will match only the lines such as the last one from your sample, select the success/failure status in the first capturing group which will be referred in the replacement pattern.
I will try to setup outgoing mail server in odoo 9 .so i fill all the field and test connection and the connection also success , but at the time of send mail it will generate an error .
Field fill like that:-
Name : sendmail
Priority: 10
SMTP Server : smtp.office365.com
SMTP Port:25
Debugging: enable
Connection Security:TLS (STARTTLS)
Username:my yser name
Password:password
But, when we send any mail then it will generate the below error
16-12-06 10:04:28,440 426 INFO test openerp.addons.base.ir.ir_mail_server: Mail delivery failed via SMTP server 'smtp.office365.com'.
SMTPDataError: 550
5.7.60 SMTP; Client does not have permissions to send as this sender
2016-12-06 10:04:28,443 426 ERROR test openerp.addons.mail.models.mail_mail: failed sending mail (id: 136) due to Mail Delivery Failed
Mail delivery failed via SMTP server 'smtp.office365.com'.
SMTPDataError: 550
5.7.60 SMTP; Client does not have permissions to send as this sender
Traceback (most recent call last):
File "/usr/lib/python2.7/dist- packages/openerp/addons/mail/models/mail_mail.py", line 262, in send
res = IrMailServer.send_email(msg, mail_server_id=mail.mail_server_id.id)
File "/usr/lib/python2.7/dist-packages/openerp/api.py", line 248, in wrapper
return new_api(self, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/openerp/api.py", line 490, in new_api
result = method(self._model, cr, uid, *args, **old_kwargs)
File "/usr/lib/python2.7/dist-packages/openerp/addons/base/ir/ir_mail_server.py", line 483, in send_email
raise MailDeliveryException(_("Mail Delivery Failed"), msg)
MailDeliveryException: (u'Mail Delivery Failed', u"Mail delivery failed via SMTP server 'smtp.office365.com'.\nSMTPDataError: 550\n5.7.60 SMTP; Client does not have permissions to send as this sender")
So i tried too much for this , but i am not getting any solution , if you have any solutin , please share with me .
Use port 587.
The error message tells you that the sender is invalid - you can only send as the mailbox owner (primary SMTP address) or as one of the proxy addresses associated with the mailbox.
Removing all catchall parameters (mail.catchall.domain and mail.catchall.alias) under "Settings" -> "Technical" -> "Parameters" -> "System Parameters" and it work like charm .
WORKS LIKE CHARM :
Removing all catchall parameters (mail.catchall.domain and mail.catchall.alias) under "Settings" -> "Technical" -> "Parameters" -> "System Parameters" and it work like charm . TY Debasish
I'm on Odoo V12
It was not suffisient for my problem, I had to delete the alias domain but there another thing to check :
I initialy created my odoo installation with a GMAIL address, worked a bit but had to switch for a pro e-mail because all my invitations e-mail was blocked by Google Bot beacause it look liked suspicious. It did this only in Odoo v12 because there is more links in the mail.
So I configured my real smtp server in Odoo but get the error 550. Odoo kept in the COMPANY settings the primary gmail address and tried to send on my other smtp server with the gmail name. The other server didn't accepted it so sent me back error 550.
Once i putted my new e-mail address in the company description, and deleted alias domain it worked !!
PS : Don't try to edit ir_mail_server.py to put in bruteforce your e-mail ... Doesn't work ..
Has anyone ran into this issue? When the script gets to the banner text the script just hangs.
I am using Net::Appliance::Session
Here is the error I get in debug. The rest of the script inserts code perfectly. I did test what I read about adding a # to the banner for each line. Same result.
banner login +
[ 4.092880] tr nope, doesn't (yet) match (?-xism:[\/a-zA-Z0-9._\[\]-]+ ?(?:\(config[^)]*\))? ?[#>] ?$)
[ 4.093124] du SEEN:
banner login +
[ 4.093304] tr nope, doesn't (yet) match (?-xism:[\/a-zA-Z0-9._\[\]-]+ ?(?:\(config[^)]*\))? ?[#>] ?$)
[ 4.305872] du SEEN:
Enter TEXT message. End with the character '+'
[ 4.306121] tr nope, doesn't (yet) match (?-xism:[\/a-zA-Z0-9._\[\]-]+ ?(?:\(config[^)]*\))? ?[#>] ?$)
We had an issue when accessing the device : 10.49.216.74
The reported error was : read timed-out at /usr/lib/perl5/site_perl/5.10.0/Net/CLI/Interact/Transport/Wrapper/Net_Telnet.pm line 35
Here is a snip of code.
my $session_obj = Net::Appliance::Session->new(
host => $ios_device_ip,
transport => 'Telnet',
personality => 'ios',
timeout => 60,
);
#interace
$session_obj->set_global_log_at('debug');
eval {
# try to login to the ios device, ignoring host check
$session_obj->connect(
username => $ios_username,
password => $ios_password,
#SHKC => 0
);
# get our running config
$version_info = $session_obj->begin_privileged;
$session_obj->cmd('conf t');
$session_obj->cmd('line con 0');
$session_obj->cmd('exec-character-bits 8');
$session_obj->cmd('international');
$session_obj->cmd('line vty 0 4');
$session_obj->cmd('exec-character-bits 8');
$session_obj->cmd('international');
$session_obj->cmd('line vty 5 15');
$session_obj->cmd('exec-character-bits 8');
$session_obj->cmd('international');
$session_obj->cmd('exit');
$session_obj->cmd('no banner login');
$session_obj->cmd('banner login +');
$session_obj->cmd('*************************************************************************');
$session_obj->cmd('* test *');
$session_obj->cmd('* *');
$session_obj->cmd('*************************************************************************');
$session_obj->cmd('+');
$session_obj->cmd('no banner MOTD');
$session_obj->cmd('banner motd +');
$session_obj->cmd('*************************************************************************');
$session_obj->cmd('* test *');
$session_obj->cmd('* *');
$session_obj->cmd('*************************************************************************');
$session_obj->cmd('+');
$session_obj->cmd('exit');
$session_obj->cmd('write memory');
$session_obj->end_privileged;
# close down our session
$session_obj->close;
};
If you look at the regexp that matches the prompt before sending a new command you'll see that it requires a specific string that closely matches user, privileged or config mode of a router.
When you send the banner login + command you get the Enter TEXT message. End with the character '+' followed by blank line from a router (instead of Router(config)# that your script expects. After a while it just times out since there is no match for the regexp.
The easiest solution is to try to send the whole banner in one command. Try concatenating your banner with a \r in one string and sending it as a one command that looks like (note the double quotes):
$session_obj->cmd("banner login + line1 \r line2 \r line3\r +");
Took way too long to figure this out... spaces are not your friend.
$session_obj->cmd("banner login + \rline1\rline2\rline3\r+");
Example with my orginal problem:
$session_obj->cmd('*************************************************************************\r* test *\r* *\r*************************************************************************');
I'm using the following project for enabling APNS in my project:
https://github.com/stephenmuss/django-ios-notifications
I'm able to send and receive push notifications on my production app fine, but the sandbox apns is having strange issues which i'm not able to solve. It's constantly not connecting to the push service. When I do manually the _connect() on the APNService or FeedbackService classes, I get the following error:
File "/Users/MyUser/git/prod/django/ios_notifications/models.py", line 56, in _connect
self.connection.do_handshake()
Error: [('SSL routines', 'SSL3_READ_BYTES', 'sslv3 alert handshake failure')]
I tried recreating the APN certificate a number of times and constantly get the same error. Is there anything else i'm missing?
I'm using the endpoints gateway.push.apple.com and gateway.sandbox.push.apple.com for connecting to the service. Is there anything else I should look into for this? I have read the following:
Apns php error "Failed to connect to APNS: 110 Connection timed out."
Converting PKCS#12 certificate into PEM using OpenSSL
Error Using PHP for iPhone APNS
Turns out Apple changed ssl context from SSL3 to TLSv1 in development. They will do this in Production eventually (not sure when). The following link shows my pull request which was accepted into the above project:
https://github.com/stephenmuss/django-ios-notifications/commit/879d589c032b935ab2921b099fd3286440bc174e
Basically, use OpenSSL.SSL.TLSv1_METHOD if you're using python or something similar in other languages.
Although OpenSSL.SSL.SSLv3_METHOD works in production, it may not work in the near future. OpenSSL.SSL.TLSv1_METHOD works in production and development.
UPDATE
Apple will remove SSL 3.0 support in production on October 29th, 2014 due to the poodle flaw.
https://developer.apple.com/news/?id=10222014a
I have worked on APN using python-django, for this you need three things URL, PORT and Certificate provided by Apple for authentication.
views.py
import socket, ssl, json, struct
theCertfile = '/tmp/abc.cert' ## absolute path where certificate file is placed.
ios_url = 'gateway.push.apple.com'
ios_port = 2195
deviceToken = '3234t54tgwg34g' ## ios device token to which you want to send notification
def ios_push(msg, theCertfile, ios_url, ios_port, deviceToken):
thePayLoad = {
'aps': {
'alert':msg,
'sound':'default',
'badge':0,
},
}
theHost = ( ios_url, ios_port )
data = json.dumps( thePayLoad )
deviceToken = deviceToken.replace(' ','')
byteToken = deviceToken.decode('hex') # Python 2
theFormat = '!BH32sH%ds' % len(data)
theNotification = struct.pack( theFormat, 0, 32, byteToken, len(data), data )
# Create our connection using the certfile saved locally
ssl_sock = ssl.wrap_socket( socket.socket( socket.AF_INET, socket.SOCK_STREAM ), certfile = theCertfile )
ssl_sock.connect( theHost )
# Write out our data
ssl_sock.write( theNotification )
# Close the connection -- apple would prefer that we keep
# a connection open and push data as needed.
ssl_sock.close()
Hopefully this would work for you.
I want to use wamp as my development server and I'm trying to send email via my email => gmail, hotmail, yahoo. I'm trying to implement a simple email php application.
Is it possible to do it in wamp?
Is it possible to do it without changing php.ini and instead use ini_set();
I have tried changing my php.ini
using my yahoo mail
SMTP = smtp.mail.yahoo.com
; http://php.net/smtp-port
smtp_port = 587
auth_user = me#yahoo.com
auth_pass = password
and got this error message "Warning: mail() [function.mail]: SMTP server response: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html in C:\wamp\www\9dot_disc_alt\abc.php on line 12"
using gmail
SMTP = smtp.gmail.com
; http://php.net/smtp-port
smtp_port = 587
auth_user = me#gmail.com
auth_pass = password
SMTP server response: 530 5.7.0 Must issue a STARTTLS command first. pc6sm6631754pbc.47 in C:\wamp\www\9dot_disc_alt\abc.php on line 12
Here's my current code:
$to = "me#yahoo.com";
$subject = "Test mail";
$message = "Hello! This is a simple email message.";
$from = "me#my.com";
$headers = "From:" . $from;
mail($to,$subject,$message,$headers);
echo "Mail Sent.";
Sir/Ma'am your answers would be of great help and be very much appreciated. Thank you++
When you use wamp, your SMTP must be your FAI, for example if you have free :
=>SMTP = smtp.free.fr (or .com)
EDIT : You can try this : http://glob.com.au/sendmail/, i's a simple windows console application that emulates sendmail's for wamp for example ;)
I found an online article that allows me to send emails using wamp + php mailer
http://nikunj-solutions.blogspot.com/2011/08/send-email-using-wamp-server.html