Related
I am trying to understand how to use reference parameters. There are several examples in my text, however they are too complicated for me to understand why and how to use them.
How and why would you want to use a reference? What would happen if you didn't make the parameter a reference, but instead left the & off?
For example, what's the difference between these functions:
int doSomething(int& a, int& b);
int doSomething(int a, int b);
I understand that reference variables are used in order to change a formal->reference, which then allows a two-way exchange of parameters. However, that is the extent of my knowledge, and a more concrete example would be of much help.
Think of a reference as an alias. When you invoke something on a reference, you're really invoking it on the object to which the reference refers.
int i;
int& j = i; // j is an alias to i
j = 5; // same as i = 5
When it comes to functions, consider:
void foo(int i)
{
i = 5;
}
Above, int i is a value and the argument passed is passed by value. That means if we say:
int x = 2;
foo(x);
i will be a copy of x. Thus setting i to 5 has no effect on x, because it's the copy of x being changed. However, if we make i a reference:
void foo(int& i) // i is an alias for a variable
{
i = 5;
}
Then saying foo(x) no longer makes a copy of x; i is x. So if we say foo(x), inside the function i = 5; is exactly the same as x = 5;, and x changes.
Hopefully that clarifies a bit.
Why is this important? When you program, you never want to copy and paste code. You want to make a function that does one task and it does it well. Whenever that task needs to be performed, you use that function.
So let's say we want to swap two variables. That looks something like this:
int x, y;
// swap:
int temp = x; // store the value of x
x = y; // make x equal to y
y = temp; // make y equal to the old value of x
Okay, great. We want to make this a function, because: swap(x, y); is much easier to read. So, let's try this:
void swap(int x, int y)
{
int temp = x;
x = y;
y = temp;
}
This won't work! The problem is that this is swapping copies of two variables. That is:
int a, b;
swap(a, b); // hm, x and y are copies of a and b...a and b remain unchanged
In C, where references do not exist, the solution was to pass the address of these variables; that is, use pointers*:
void swap(int* x, int* y)
{
int temp = *x;
*x = *y;
*y = temp;
}
int a, b;
swap(&a, &b);
This works well. However, it's a bit clumsy to use, and actually a bit unsafe. swap(nullptr, nullptr), swaps two nothings and dereferences null pointers...undefined behavior! Fixable with some checks:
void swap(int* x, int* y)
{
if (x == nullptr || y == nullptr)
return; // one is null; this is a meaningless operation
int temp = *x;
*x = *y;
*y = temp;
}
But looks how clumsy our code has gotten. C++ introduces references to solve this problem. If we can just alias a variable, we get the code we were looking for:
void swap(int& x, int& y)
{
int temp = x;
x = y;
y = temp;
}
int a, b;
swap(a, b); // inside, x and y are really a and b
Both easy to use, and safe. (We can't accidentally pass in a null, there are no null references.) This works because the swap happening inside the function is really happening on the variables being aliased outside the function.
(Note, never write a swap function. :) One already exists in the header <algorithm>, and it's templated to work with any type.)
Another use is to remove that copy that happens when you call a function. Consider we have a data type that's very big. Copying this object takes a lot of time, and we'd like to avoid that:
struct big_data
{ char data[9999999]; }; // big!
void do_something(big_data data);
big_data d;
do_something(d); // ouch, making a copy of all that data :<
However, all we really need is an alias to the variable, so let's indicate that. (Again, back in C we'd pass the address of our big data type, solving the copying problem but introducing clumsiness.):
void do_something(big_data& data);
big_data d;
do_something(d); // no copies at all! data aliases d within the function
This is why you'll hear it said you should pass things by reference all the time, unless they are primitive types. (Because internally passing an alias is probably done with a pointer, like in C. For small objects it's just faster to make the copy then worry about pointers.)
Keep in mind you should be const-correct. This means if your function doesn't modify the parameter, mark it as const. If do_something above only looked at but didn't change data, we'd mark it as const:
void do_something(const big_data& data); // alias a big_data, and don't change it
We avoid the copy and we say "hey, we won't be modifying this." This has other side effects (with things like temporary variables), but you shouldn't worry about that now.
In contrast, our swap function cannot be const, because we are indeed modifying the aliases.
Hope this clarifies some more.
*Rough pointers tutorial:
A pointer is a variable that holds the address of another variable. For example:
int i; // normal int
int* p; // points to an integer (is not an integer!)
p = &i; // &i means "address of i". p is pointing to i
*p = 2; // *p means "dereference p". that is, this goes to the int
// pointed to by p (i), and sets it to 2.
So, if you've seen the pointer-version swap function, we pass the address of the variables we want to swap, and then we do the swap, dereferencing to get and set values.
Lets take a simple example of a function named increment which increments its argument. Consider:
void increment(int input) {
input++;
}
which will not work as the change takes place on the copy of the argument passed to the function on the actual parameter. So
int i = 1;
std::cout<<i<<" ";
increment(i);
std::cout<<i<<" ";
will produce 1 1 as output.
To make the function work on the actual parameter passed we pass its reference to the function as:
void increment(int &input) { // note the &
input++;
}
the change made to input inside the function is actually being made to the actual parameter. This will produce the expected output of 1 2
GMan's answer gives you the lowdown on references. I just wanted to show you a very basic function that must use references: swap, which swaps two variables. Here it is for ints (as you requested):
// changes to a & b hold when the function exits
void swap(int& a, int& b) {
int tmp = a;
a = b;
b = tmp;
}
// changes to a & b are local to swap_noref and will go away when the function exits
void swap_noref(int a, int b) {
int tmp = a;
a = b;
b = tmp;
}
// changes swap_ptr makes to the variables pointed to by pa & pb
// are visible outside swap_ptr, but changes to pa and pb won't be visible
void swap_ptr(int *pa, int *pb) {
int tmp = *pa;
*pa = *pb;
*pb = tmp;
}
int main() {
int x = 17;
int y = 42;
// next line will print "x: 17; y: 42"
std::cout << "x: " << x << "; y: " << y << std::endl
// swap can alter x & y
swap(x,y);
// next line will print "x: 42; y: 17"
std::cout << "x: " << x << "; y: " << y << std::endl
// swap_noref can't alter x or y
swap_noref(x,y);
// next line will print "x: 42; y: 17"
std::cout << "x: " << x << "; y: " << y << std::endl
// swap_ptr can alter x & y
swap_ptr(&x,&y);
// next line will print "x: 17; y: 42"
std::cout << "x: " << x << "; y: " << y << std::endl
}
There is a cleverer swap implementation for ints that doesn't need a temporary. However, here I care more about clear than clever.
Without references (or pointers), swap_noref cannot alter the variables passed to it, which means it simply cannot work. swap_ptr can alter variables, but it uses pointers, which are messy (when references won't quite cut it, however, pointers can do the job). swap is the simplest overall.
On Pointers
Pointers let you do some of the same things as references. However, pointers put more responsibility on the programmer to manage them and the memory they point to (a topic called "memory management"–but don't worry about it for now). As a consequence, references should be your preferred tool for now.
Think of variables as names bound to boxes that store a value. Constants are names bound directly to values. Both map names to values, but the value of constants can't be changed. While the value held in a box can change, the binding of name to box can't, which is why a reference cannot be changed to refer to a different variable.
Two basic operations on variables are getting the current value (done simply by using the variable's name) and assigning a new value (the assignment operator, '='). Values are stored in memory (the box holding a value is simply a contiguous region of memory). For example,
int a = 17;
results in something like (note: in the following, "foo # 0xDEADBEEF" stands for a variable with name "foo" stored at address "0xDEADBEEF". Memory addresses have been made up):
____
a # 0x1000: | 17 |
----
Everything stored in memory has a starting address, so there's one more operation: get the address of the value ("&" is the address-of operator). A pointer is a variable that stores an address.
int *pa = &a;
results in:
______ ____
pa # 0x10A0: |0x1000| ------> # 0x1000: | 17 |
------ ----
Note that a pointer simply stores a memory address, so it doesn't have access to the name of what it points to. In fact, pointers can point to things without names, but that's a topic for another day.
There are a few operations on pointers. You can dereference a pointer (the "*" operator), which gives you the data the pointer points to. Dereferencing is the opposite of getting the address: *&a is the same box as a, &*pa is the same value as pa, and *pa is the same box as a. In particular, pa in the example holds 0x1000; * pa means "the int in memory at location pa", or "the int in memory at location 0x1000". "a" is also "the int at memory location 0x1000". Other operation on pointers are addition and subtraction, but that's also a topic for another day.
// Passes in mutable references of a and b.
int doSomething(int& a, int& b) {
a = 5;
cout << "1: " << a << b; // prints 1: 5,6
}
a = 0;
b = 6;
doSomething(a, b);
cout << "2: " << a << ", " << b; // prints 2: 5,6
Alternatively,
// Passes in copied values of a and b.
int doSomething(int a, int b) {
a = 5;
cout << "1: " << a << b; // prints 1: 5,6
}
a = 0;
b = 6;
doSomething(a, b);
cout << "2: " << a << ", " << b; // prints 2: 0,6
Or the const version:
// Passes in const references a and b.
int doSomething(const int &a, const int &b) {
a = 5; // COMPILE ERROR, cannot assign to const reference.
cout << "1: " << b; // prints 1: 6
}
a = 0;
b = 6;
doSomething(a, b);
References are used to pass locations of variables, so they don't need to be copied on the stack to the new function.
A simple pair of examples which you can run online.
The first uses a normal function, and the second uses references:
Example 1 (no reference)
Example 2 (reference)
Edit - here's the source code incase you don't like links:
Example 1
using namespace std;
void foo(int y){
y=2;
}
int main(){
int x=1;
foo(x);
cout<<x;//outputs 1
}
Example 2
using namespace std;
void foo(int & y){
y=2;
}
int main(){
int x=1;
foo(x);
cout<<x;//outputs 2
}
I don't know if this is the most basic, but here goes...
typedef int Element;
typedef std::list<Element> ElementList;
// Defined elsewhere.
bool CanReadElement(void);
Element ReadSingleElement(void);
int ReadElementsIntoList(int count, ElementList& elems)
{
int elemsRead = 0;
while(elemsRead < count && CanReadElement())
elems.push_back(ReadSingleElement());
return count;
}
Here we use a reference to pass our list of elements into ReadElementsIntoList(). This way, the function loads the elements right into the list. If we didn't use a reference, then elems would be a copy of the passed-in list, which would have the elements added to it, but then elems would be discarded when the function returns.
This works both ways. In the case of count, we don't make it a reference, because we don't want to modify the count passed in, instead returning the number of elements read. This allows the calling code to compare the number of elements actually read to the requested number; if they don't match, then CanReadElement() must have returned false, and immediately trying to read some more would likely fail. If they match, then maybe count was less than the number of elements available, and a further read would be appropriate. Finally, if ReadElementsIntoList() needed to modify count internally, it could do so without mucking up the caller.
How about by metaphor: Say your function counts beans in a jar. It needs the jar of beans and you need to know the result which can't be the return value (for any number of reasons). You could send it the jar and the variable value, but you'll never know if or what it changes the value to. Instead, you need to send it that variable via a return addressed envelope, so it can put the value in that and know it's written the result to the value at said address.
Correct me if I'm wrong, but a reference is only a dereferenced pointer, or?
The difference to a pointer is, that you can't easily commit a NULL.
I am trying to understand how to use reference parameters. There are several examples in my text, however they are too complicated for me to understand why and how to use them.
How and why would you want to use a reference? What would happen if you didn't make the parameter a reference, but instead left the & off?
For example, what's the difference between these functions:
int doSomething(int& a, int& b);
int doSomething(int a, int b);
I understand that reference variables are used in order to change a formal->reference, which then allows a two-way exchange of parameters. However, that is the extent of my knowledge, and a more concrete example would be of much help.
Think of a reference as an alias. When you invoke something on a reference, you're really invoking it on the object to which the reference refers.
int i;
int& j = i; // j is an alias to i
j = 5; // same as i = 5
When it comes to functions, consider:
void foo(int i)
{
i = 5;
}
Above, int i is a value and the argument passed is passed by value. That means if we say:
int x = 2;
foo(x);
i will be a copy of x. Thus setting i to 5 has no effect on x, because it's the copy of x being changed. However, if we make i a reference:
void foo(int& i) // i is an alias for a variable
{
i = 5;
}
Then saying foo(x) no longer makes a copy of x; i is x. So if we say foo(x), inside the function i = 5; is exactly the same as x = 5;, and x changes.
Hopefully that clarifies a bit.
Why is this important? When you program, you never want to copy and paste code. You want to make a function that does one task and it does it well. Whenever that task needs to be performed, you use that function.
So let's say we want to swap two variables. That looks something like this:
int x, y;
// swap:
int temp = x; // store the value of x
x = y; // make x equal to y
y = temp; // make y equal to the old value of x
Okay, great. We want to make this a function, because: swap(x, y); is much easier to read. So, let's try this:
void swap(int x, int y)
{
int temp = x;
x = y;
y = temp;
}
This won't work! The problem is that this is swapping copies of two variables. That is:
int a, b;
swap(a, b); // hm, x and y are copies of a and b...a and b remain unchanged
In C, where references do not exist, the solution was to pass the address of these variables; that is, use pointers*:
void swap(int* x, int* y)
{
int temp = *x;
*x = *y;
*y = temp;
}
int a, b;
swap(&a, &b);
This works well. However, it's a bit clumsy to use, and actually a bit unsafe. swap(nullptr, nullptr), swaps two nothings and dereferences null pointers...undefined behavior! Fixable with some checks:
void swap(int* x, int* y)
{
if (x == nullptr || y == nullptr)
return; // one is null; this is a meaningless operation
int temp = *x;
*x = *y;
*y = temp;
}
But looks how clumsy our code has gotten. C++ introduces references to solve this problem. If we can just alias a variable, we get the code we were looking for:
void swap(int& x, int& y)
{
int temp = x;
x = y;
y = temp;
}
int a, b;
swap(a, b); // inside, x and y are really a and b
Both easy to use, and safe. (We can't accidentally pass in a null, there are no null references.) This works because the swap happening inside the function is really happening on the variables being aliased outside the function.
(Note, never write a swap function. :) One already exists in the header <algorithm>, and it's templated to work with any type.)
Another use is to remove that copy that happens when you call a function. Consider we have a data type that's very big. Copying this object takes a lot of time, and we'd like to avoid that:
struct big_data
{ char data[9999999]; }; // big!
void do_something(big_data data);
big_data d;
do_something(d); // ouch, making a copy of all that data :<
However, all we really need is an alias to the variable, so let's indicate that. (Again, back in C we'd pass the address of our big data type, solving the copying problem but introducing clumsiness.):
void do_something(big_data& data);
big_data d;
do_something(d); // no copies at all! data aliases d within the function
This is why you'll hear it said you should pass things by reference all the time, unless they are primitive types. (Because internally passing an alias is probably done with a pointer, like in C. For small objects it's just faster to make the copy then worry about pointers.)
Keep in mind you should be const-correct. This means if your function doesn't modify the parameter, mark it as const. If do_something above only looked at but didn't change data, we'd mark it as const:
void do_something(const big_data& data); // alias a big_data, and don't change it
We avoid the copy and we say "hey, we won't be modifying this." This has other side effects (with things like temporary variables), but you shouldn't worry about that now.
In contrast, our swap function cannot be const, because we are indeed modifying the aliases.
Hope this clarifies some more.
*Rough pointers tutorial:
A pointer is a variable that holds the address of another variable. For example:
int i; // normal int
int* p; // points to an integer (is not an integer!)
p = &i; // &i means "address of i". p is pointing to i
*p = 2; // *p means "dereference p". that is, this goes to the int
// pointed to by p (i), and sets it to 2.
So, if you've seen the pointer-version swap function, we pass the address of the variables we want to swap, and then we do the swap, dereferencing to get and set values.
Lets take a simple example of a function named increment which increments its argument. Consider:
void increment(int input) {
input++;
}
which will not work as the change takes place on the copy of the argument passed to the function on the actual parameter. So
int i = 1;
std::cout<<i<<" ";
increment(i);
std::cout<<i<<" ";
will produce 1 1 as output.
To make the function work on the actual parameter passed we pass its reference to the function as:
void increment(int &input) { // note the &
input++;
}
the change made to input inside the function is actually being made to the actual parameter. This will produce the expected output of 1 2
GMan's answer gives you the lowdown on references. I just wanted to show you a very basic function that must use references: swap, which swaps two variables. Here it is for ints (as you requested):
// changes to a & b hold when the function exits
void swap(int& a, int& b) {
int tmp = a;
a = b;
b = tmp;
}
// changes to a & b are local to swap_noref and will go away when the function exits
void swap_noref(int a, int b) {
int tmp = a;
a = b;
b = tmp;
}
// changes swap_ptr makes to the variables pointed to by pa & pb
// are visible outside swap_ptr, but changes to pa and pb won't be visible
void swap_ptr(int *pa, int *pb) {
int tmp = *pa;
*pa = *pb;
*pb = tmp;
}
int main() {
int x = 17;
int y = 42;
// next line will print "x: 17; y: 42"
std::cout << "x: " << x << "; y: " << y << std::endl
// swap can alter x & y
swap(x,y);
// next line will print "x: 42; y: 17"
std::cout << "x: " << x << "; y: " << y << std::endl
// swap_noref can't alter x or y
swap_noref(x,y);
// next line will print "x: 42; y: 17"
std::cout << "x: " << x << "; y: " << y << std::endl
// swap_ptr can alter x & y
swap_ptr(&x,&y);
// next line will print "x: 17; y: 42"
std::cout << "x: " << x << "; y: " << y << std::endl
}
There is a cleverer swap implementation for ints that doesn't need a temporary. However, here I care more about clear than clever.
Without references (or pointers), swap_noref cannot alter the variables passed to it, which means it simply cannot work. swap_ptr can alter variables, but it uses pointers, which are messy (when references won't quite cut it, however, pointers can do the job). swap is the simplest overall.
On Pointers
Pointers let you do some of the same things as references. However, pointers put more responsibility on the programmer to manage them and the memory they point to (a topic called "memory management"–but don't worry about it for now). As a consequence, references should be your preferred tool for now.
Think of variables as names bound to boxes that store a value. Constants are names bound directly to values. Both map names to values, but the value of constants can't be changed. While the value held in a box can change, the binding of name to box can't, which is why a reference cannot be changed to refer to a different variable.
Two basic operations on variables are getting the current value (done simply by using the variable's name) and assigning a new value (the assignment operator, '='). Values are stored in memory (the box holding a value is simply a contiguous region of memory). For example,
int a = 17;
results in something like (note: in the following, "foo # 0xDEADBEEF" stands for a variable with name "foo" stored at address "0xDEADBEEF". Memory addresses have been made up):
____
a # 0x1000: | 17 |
----
Everything stored in memory has a starting address, so there's one more operation: get the address of the value ("&" is the address-of operator). A pointer is a variable that stores an address.
int *pa = &a;
results in:
______ ____
pa # 0x10A0: |0x1000| ------> # 0x1000: | 17 |
------ ----
Note that a pointer simply stores a memory address, so it doesn't have access to the name of what it points to. In fact, pointers can point to things without names, but that's a topic for another day.
There are a few operations on pointers. You can dereference a pointer (the "*" operator), which gives you the data the pointer points to. Dereferencing is the opposite of getting the address: *&a is the same box as a, &*pa is the same value as pa, and *pa is the same box as a. In particular, pa in the example holds 0x1000; * pa means "the int in memory at location pa", or "the int in memory at location 0x1000". "a" is also "the int at memory location 0x1000". Other operation on pointers are addition and subtraction, but that's also a topic for another day.
// Passes in mutable references of a and b.
int doSomething(int& a, int& b) {
a = 5;
cout << "1: " << a << b; // prints 1: 5,6
}
a = 0;
b = 6;
doSomething(a, b);
cout << "2: " << a << ", " << b; // prints 2: 5,6
Alternatively,
// Passes in copied values of a and b.
int doSomething(int a, int b) {
a = 5;
cout << "1: " << a << b; // prints 1: 5,6
}
a = 0;
b = 6;
doSomething(a, b);
cout << "2: " << a << ", " << b; // prints 2: 0,6
Or the const version:
// Passes in const references a and b.
int doSomething(const int &a, const int &b) {
a = 5; // COMPILE ERROR, cannot assign to const reference.
cout << "1: " << b; // prints 1: 6
}
a = 0;
b = 6;
doSomething(a, b);
References are used to pass locations of variables, so they don't need to be copied on the stack to the new function.
A simple pair of examples which you can run online.
The first uses a normal function, and the second uses references:
Example 1 (no reference)
Example 2 (reference)
Edit - here's the source code incase you don't like links:
Example 1
using namespace std;
void foo(int y){
y=2;
}
int main(){
int x=1;
foo(x);
cout<<x;//outputs 1
}
Example 2
using namespace std;
void foo(int & y){
y=2;
}
int main(){
int x=1;
foo(x);
cout<<x;//outputs 2
}
I don't know if this is the most basic, but here goes...
typedef int Element;
typedef std::list<Element> ElementList;
// Defined elsewhere.
bool CanReadElement(void);
Element ReadSingleElement(void);
int ReadElementsIntoList(int count, ElementList& elems)
{
int elemsRead = 0;
while(elemsRead < count && CanReadElement())
elems.push_back(ReadSingleElement());
return count;
}
Here we use a reference to pass our list of elements into ReadElementsIntoList(). This way, the function loads the elements right into the list. If we didn't use a reference, then elems would be a copy of the passed-in list, which would have the elements added to it, but then elems would be discarded when the function returns.
This works both ways. In the case of count, we don't make it a reference, because we don't want to modify the count passed in, instead returning the number of elements read. This allows the calling code to compare the number of elements actually read to the requested number; if they don't match, then CanReadElement() must have returned false, and immediately trying to read some more would likely fail. If they match, then maybe count was less than the number of elements available, and a further read would be appropriate. Finally, if ReadElementsIntoList() needed to modify count internally, it could do so without mucking up the caller.
How about by metaphor: Say your function counts beans in a jar. It needs the jar of beans and you need to know the result which can't be the return value (for any number of reasons). You could send it the jar and the variable value, but you'll never know if or what it changes the value to. Instead, you need to send it that variable via a return addressed envelope, so it can put the value in that and know it's written the result to the value at said address.
Correct me if I'm wrong, but a reference is only a dereferenced pointer, or?
The difference to a pointer is, that you can't easily commit a NULL.
I know the ISO C standard make a big deal about separating translation behaviour and execution behaviour, partly to ensure cross-compilers don't have to carry the execution environment of every target.
By that, I mean the compiler has limited information available to it compared to a running program. That limits what you can do in the source code, such as not initialising a variable based on the return value from a function like this:
int twice (int val) { return val * 2; }
int xyzzy = twice (7);
int main () { printf ("%d\n", xyzzy); return 0; }
What I'm curious about is how user defined literals in C++11 fit into this scheme. Since the literal evaluation relies on a function, what's to stop that function doing things like:
returning a random value (even if based on the input such as 42_roughly giving you a value between 40 and 44)?
having side effects, such as changing global variables?
Does the fact that a function have to be called means that these aren't really literals in the sense of being calculated at compile time?
If that's the case, what's the advantage of these literals over any other function call. In other words why is:
int xyzzy = 1101_1110_b;
preferable to:
int xyzzy = makeBin ("1101_1110");
?
The secret is all in whether you declare the user-defined literal functions as constexpr or not.
Compare this (normal execution-time function):
#include <iostream>
int operator "" _twice(unsigned long long num) { return num*2; }
int xyzzy = 7_twice;
int main () { std::cout << xyzzy << "\n"; return 0; }
With this (compile-time constant, the static_assert works):
#include <iostream>
constexpr int operator "" _twice(unsigned long long num) { return num*2; }
int xyzzy = 7_twice;
int main () {
static_assert(7_twice == 14, "not compile time constant");
std::cout << xyzzy << "\n";
return 0;
}
Obviously, declaring a function constexpr restricts all statements within to be constexpr also, or compile-time constants; no random number shenanigans allowed.
I have the following sample code. Just wanted to know if is valid to take address of a local variable in a global pointer and then modify it's contents in a sub function. Following program correctly modifies value of variable a . Can such practice cause any issues ?
#include <iostream>
#include <vector>
using namespace std;
vector<int*> va;
void func()
{
int b ;
b = 10;
int * c = va[0];
cout << "VALUE OF C=" << *c << endl;
*c = 20;
cout << "VALUE OF C=" << *c << endl;
}
int main()
{
int a;
a = 1;
va.push_back(&a);
func();
cout << "VALUE IS= " << a << endl;
return 0;
}
This is OK, as long as you don't try to dereference va[0] after a has gone out of scope. You don't, so technically this code is fine.
That said, this whole approach may not be such a good idea because it makes code very hard to maintain.
I'd say that if your program grows you could forget about a change you made in some function and get some weird errors you didn't expect.
Your code is perfectly valid as long as you call func() while being in the scope of a. However, this is not considered to be a good practice. Consider
struct HugeStruct {
int a;
};
std::vector<HugeStruct*> va;
void print_va()
{
for (size_t i = 0; i < va.size(); i++)
std::cout<<va[i].a<<' ';
std::cout<<std:endl;
}
int main()
{
for (int i = 0; i < 4; i++) {
HugeStruct hs = {i};
va.push_back(&hs);
}
print_va(); // oups ...
}
There are 2 problems in the code above.
Don't use global variables unless absolutely necessary. Global variables violate encapsulation and may cause overlay of variable names. In most cases it's much easier to pass them to functions when needed.
The vector of pointers in this code looks awful. As you can see, I forgot that pointers became invalid as soon as I left for-loop, and print_va just printed out garbage. The simple solution could be to store objects in a vector instead of pointers. But what if I don't want HugeStruct objects to be copied again and again? It can take quite a lot of time. (Suppose that instead of one int we have a vector of million integers.) One of the solutions is to allocate HugeStructs dynamically and use vector of smart pointers: std::vector<std::shared_ptr<HugeStruct>>. This way you don't have to bother about memory management and scope. Objects will be destroyed as soon as nobody will refer to them.
I am trying to understand how to use reference parameters. There are several examples in my text, however they are too complicated for me to understand why and how to use them.
How and why would you want to use a reference? What would happen if you didn't make the parameter a reference, but instead left the & off?
For example, what's the difference between these functions:
int doSomething(int& a, int& b);
int doSomething(int a, int b);
I understand that reference variables are used in order to change a formal->reference, which then allows a two-way exchange of parameters. However, that is the extent of my knowledge, and a more concrete example would be of much help.
Think of a reference as an alias. When you invoke something on a reference, you're really invoking it on the object to which the reference refers.
int i;
int& j = i; // j is an alias to i
j = 5; // same as i = 5
When it comes to functions, consider:
void foo(int i)
{
i = 5;
}
Above, int i is a value and the argument passed is passed by value. That means if we say:
int x = 2;
foo(x);
i will be a copy of x. Thus setting i to 5 has no effect on x, because it's the copy of x being changed. However, if we make i a reference:
void foo(int& i) // i is an alias for a variable
{
i = 5;
}
Then saying foo(x) no longer makes a copy of x; i is x. So if we say foo(x), inside the function i = 5; is exactly the same as x = 5;, and x changes.
Hopefully that clarifies a bit.
Why is this important? When you program, you never want to copy and paste code. You want to make a function that does one task and it does it well. Whenever that task needs to be performed, you use that function.
So let's say we want to swap two variables. That looks something like this:
int x, y;
// swap:
int temp = x; // store the value of x
x = y; // make x equal to y
y = temp; // make y equal to the old value of x
Okay, great. We want to make this a function, because: swap(x, y); is much easier to read. So, let's try this:
void swap(int x, int y)
{
int temp = x;
x = y;
y = temp;
}
This won't work! The problem is that this is swapping copies of two variables. That is:
int a, b;
swap(a, b); // hm, x and y are copies of a and b...a and b remain unchanged
In C, where references do not exist, the solution was to pass the address of these variables; that is, use pointers*:
void swap(int* x, int* y)
{
int temp = *x;
*x = *y;
*y = temp;
}
int a, b;
swap(&a, &b);
This works well. However, it's a bit clumsy to use, and actually a bit unsafe. swap(nullptr, nullptr), swaps two nothings and dereferences null pointers...undefined behavior! Fixable with some checks:
void swap(int* x, int* y)
{
if (x == nullptr || y == nullptr)
return; // one is null; this is a meaningless operation
int temp = *x;
*x = *y;
*y = temp;
}
But looks how clumsy our code has gotten. C++ introduces references to solve this problem. If we can just alias a variable, we get the code we were looking for:
void swap(int& x, int& y)
{
int temp = x;
x = y;
y = temp;
}
int a, b;
swap(a, b); // inside, x and y are really a and b
Both easy to use, and safe. (We can't accidentally pass in a null, there are no null references.) This works because the swap happening inside the function is really happening on the variables being aliased outside the function.
(Note, never write a swap function. :) One already exists in the header <algorithm>, and it's templated to work with any type.)
Another use is to remove that copy that happens when you call a function. Consider we have a data type that's very big. Copying this object takes a lot of time, and we'd like to avoid that:
struct big_data
{ char data[9999999]; }; // big!
void do_something(big_data data);
big_data d;
do_something(d); // ouch, making a copy of all that data :<
However, all we really need is an alias to the variable, so let's indicate that. (Again, back in C we'd pass the address of our big data type, solving the copying problem but introducing clumsiness.):
void do_something(big_data& data);
big_data d;
do_something(d); // no copies at all! data aliases d within the function
This is why you'll hear it said you should pass things by reference all the time, unless they are primitive types. (Because internally passing an alias is probably done with a pointer, like in C. For small objects it's just faster to make the copy then worry about pointers.)
Keep in mind you should be const-correct. This means if your function doesn't modify the parameter, mark it as const. If do_something above only looked at but didn't change data, we'd mark it as const:
void do_something(const big_data& data); // alias a big_data, and don't change it
We avoid the copy and we say "hey, we won't be modifying this." This has other side effects (with things like temporary variables), but you shouldn't worry about that now.
In contrast, our swap function cannot be const, because we are indeed modifying the aliases.
Hope this clarifies some more.
*Rough pointers tutorial:
A pointer is a variable that holds the address of another variable. For example:
int i; // normal int
int* p; // points to an integer (is not an integer!)
p = &i; // &i means "address of i". p is pointing to i
*p = 2; // *p means "dereference p". that is, this goes to the int
// pointed to by p (i), and sets it to 2.
So, if you've seen the pointer-version swap function, we pass the address of the variables we want to swap, and then we do the swap, dereferencing to get and set values.
Lets take a simple example of a function named increment which increments its argument. Consider:
void increment(int input) {
input++;
}
which will not work as the change takes place on the copy of the argument passed to the function on the actual parameter. So
int i = 1;
std::cout<<i<<" ";
increment(i);
std::cout<<i<<" ";
will produce 1 1 as output.
To make the function work on the actual parameter passed we pass its reference to the function as:
void increment(int &input) { // note the &
input++;
}
the change made to input inside the function is actually being made to the actual parameter. This will produce the expected output of 1 2
GMan's answer gives you the lowdown on references. I just wanted to show you a very basic function that must use references: swap, which swaps two variables. Here it is for ints (as you requested):
// changes to a & b hold when the function exits
void swap(int& a, int& b) {
int tmp = a;
a = b;
b = tmp;
}
// changes to a & b are local to swap_noref and will go away when the function exits
void swap_noref(int a, int b) {
int tmp = a;
a = b;
b = tmp;
}
// changes swap_ptr makes to the variables pointed to by pa & pb
// are visible outside swap_ptr, but changes to pa and pb won't be visible
void swap_ptr(int *pa, int *pb) {
int tmp = *pa;
*pa = *pb;
*pb = tmp;
}
int main() {
int x = 17;
int y = 42;
// next line will print "x: 17; y: 42"
std::cout << "x: " << x << "; y: " << y << std::endl
// swap can alter x & y
swap(x,y);
// next line will print "x: 42; y: 17"
std::cout << "x: " << x << "; y: " << y << std::endl
// swap_noref can't alter x or y
swap_noref(x,y);
// next line will print "x: 42; y: 17"
std::cout << "x: " << x << "; y: " << y << std::endl
// swap_ptr can alter x & y
swap_ptr(&x,&y);
// next line will print "x: 17; y: 42"
std::cout << "x: " << x << "; y: " << y << std::endl
}
There is a cleverer swap implementation for ints that doesn't need a temporary. However, here I care more about clear than clever.
Without references (or pointers), swap_noref cannot alter the variables passed to it, which means it simply cannot work. swap_ptr can alter variables, but it uses pointers, which are messy (when references won't quite cut it, however, pointers can do the job). swap is the simplest overall.
On Pointers
Pointers let you do some of the same things as references. However, pointers put more responsibility on the programmer to manage them and the memory they point to (a topic called "memory management"–but don't worry about it for now). As a consequence, references should be your preferred tool for now.
Think of variables as names bound to boxes that store a value. Constants are names bound directly to values. Both map names to values, but the value of constants can't be changed. While the value held in a box can change, the binding of name to box can't, which is why a reference cannot be changed to refer to a different variable.
Two basic operations on variables are getting the current value (done simply by using the variable's name) and assigning a new value (the assignment operator, '='). Values are stored in memory (the box holding a value is simply a contiguous region of memory). For example,
int a = 17;
results in something like (note: in the following, "foo # 0xDEADBEEF" stands for a variable with name "foo" stored at address "0xDEADBEEF". Memory addresses have been made up):
____
a # 0x1000: | 17 |
----
Everything stored in memory has a starting address, so there's one more operation: get the address of the value ("&" is the address-of operator). A pointer is a variable that stores an address.
int *pa = &a;
results in:
______ ____
pa # 0x10A0: |0x1000| ------> # 0x1000: | 17 |
------ ----
Note that a pointer simply stores a memory address, so it doesn't have access to the name of what it points to. In fact, pointers can point to things without names, but that's a topic for another day.
There are a few operations on pointers. You can dereference a pointer (the "*" operator), which gives you the data the pointer points to. Dereferencing is the opposite of getting the address: *&a is the same box as a, &*pa is the same value as pa, and *pa is the same box as a. In particular, pa in the example holds 0x1000; * pa means "the int in memory at location pa", or "the int in memory at location 0x1000". "a" is also "the int at memory location 0x1000". Other operation on pointers are addition and subtraction, but that's also a topic for another day.
// Passes in mutable references of a and b.
int doSomething(int& a, int& b) {
a = 5;
cout << "1: " << a << b; // prints 1: 5,6
}
a = 0;
b = 6;
doSomething(a, b);
cout << "2: " << a << ", " << b; // prints 2: 5,6
Alternatively,
// Passes in copied values of a and b.
int doSomething(int a, int b) {
a = 5;
cout << "1: " << a << b; // prints 1: 5,6
}
a = 0;
b = 6;
doSomething(a, b);
cout << "2: " << a << ", " << b; // prints 2: 0,6
Or the const version:
// Passes in const references a and b.
int doSomething(const int &a, const int &b) {
a = 5; // COMPILE ERROR, cannot assign to const reference.
cout << "1: " << b; // prints 1: 6
}
a = 0;
b = 6;
doSomething(a, b);
References are used to pass locations of variables, so they don't need to be copied on the stack to the new function.
A simple pair of examples which you can run online.
The first uses a normal function, and the second uses references:
Example 1 (no reference)
Example 2 (reference)
Edit - here's the source code incase you don't like links:
Example 1
using namespace std;
void foo(int y){
y=2;
}
int main(){
int x=1;
foo(x);
cout<<x;//outputs 1
}
Example 2
using namespace std;
void foo(int & y){
y=2;
}
int main(){
int x=1;
foo(x);
cout<<x;//outputs 2
}
I don't know if this is the most basic, but here goes...
typedef int Element;
typedef std::list<Element> ElementList;
// Defined elsewhere.
bool CanReadElement(void);
Element ReadSingleElement(void);
int ReadElementsIntoList(int count, ElementList& elems)
{
int elemsRead = 0;
while(elemsRead < count && CanReadElement())
elems.push_back(ReadSingleElement());
return count;
}
Here we use a reference to pass our list of elements into ReadElementsIntoList(). This way, the function loads the elements right into the list. If we didn't use a reference, then elems would be a copy of the passed-in list, which would have the elements added to it, but then elems would be discarded when the function returns.
This works both ways. In the case of count, we don't make it a reference, because we don't want to modify the count passed in, instead returning the number of elements read. This allows the calling code to compare the number of elements actually read to the requested number; if they don't match, then CanReadElement() must have returned false, and immediately trying to read some more would likely fail. If they match, then maybe count was less than the number of elements available, and a further read would be appropriate. Finally, if ReadElementsIntoList() needed to modify count internally, it could do so without mucking up the caller.
How about by metaphor: Say your function counts beans in a jar. It needs the jar of beans and you need to know the result which can't be the return value (for any number of reasons). You could send it the jar and the variable value, but you'll never know if or what it changes the value to. Instead, you need to send it that variable via a return addressed envelope, so it can put the value in that and know it's written the result to the value at said address.
Correct me if I'm wrong, but a reference is only a dereferenced pointer, or?
The difference to a pointer is, that you can't easily commit a NULL.