Not sure why but I've been looking everywhere and tried about 20 different things today to fix it with no luck.
I'm trying to use ssh authentication to link my website (inside Docker using Django) with amazon AWS ec2.
The error is really tilting and doesn't seem to be changing no matter what I do.
This is the error (I've removed the DNS)
ssh ec2-user#ec2-[DNS]-eu-west-2.compute.amazonaws.com: Permission denied (publickey,gssapi-keyex,gssapi-with-mic)
I've changed the SSHD config file to this: (still no luck, this was the result of 4 different tutorials all saying different things)
# $OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/bin:/usr/sbin:/sbin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
# Ciphers and keying
#RekeyLimit default none
# Logging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
KbdInteractiveAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
GSSAPIAuthentication yes
GSSAPICleanupCredentials no
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the KbdInteractiveAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via KbdInteractiveAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and KbdInteractiveAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /etc/ssh/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server
I've truly ran out of ideas on this one, any help would be greatly appreciated as it's my final step in a 3 month personal programming project that seems to never end.
When I use the plugin for authentication at server.conf, authentication wont work, but without it, non existent users can authenticate also.
I have added the following lines in the server conf and clinet
Commands in the server.conf file
================================
mode server
tls-server
plugin /usr/lib64/openvpn/plugin/lib/openvpn-auth-pam.so login
key-direction 0
================================
Commands in the client file
=================================
port 1194
proto udp
dev tun
nobind
key-direction 1
redirect-gateway def1
tls-version-min 1.2
auth SHA256
auth-user-pass
tls-client
remote-cert-tls server
resolv-retry infinite
persist-key
persist-tun
verb 3
===============================
Logs:
==============================================================
PLUGIN_CALL: POST /usr/lib64/openvpn/plugin/lib/openvpn-auth-pam.so/PLUGIN_AUTH_USER_PASS_VERIFY status=1
PLUGIN_CALL: plugin function PLUGIN_AUTH_USER_PASS_VERIFY failed with status 1: /usr/lib64/openvpn/plugin/lib/openvpn-auth-pam.so
TLS Auth Error: Auth Username/Password verification failed for peer
Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #7 / time = (1559124952) Wed May 29 10:15:52 2019 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings
TLS Error: incoming packet authentication failed from [AF_INET6]::ffff:
openvpn[10420]: pam_unix(login:auth): authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=*****```
==============================================================
I have used differen approached, although in production plugin /usr/lib64/openvpn/plugin/lib/openvpn-auth-pam.so login is recommended way, but I have taken one shell script and got authentication, but remember it is dangerous.
add following lines in your /etc/openvpn/server.conf file
--verify-cline-cert none
script-security 2
auth-user-pass-verify /etc/openvpn/example.sh via-file
Now create a file in /etc/openvpn/example.sh with following content
!/bin/bash
echo "started"
username=`head -1 $1`
password=`tail -1 $1`
if grep "$username:$password" $0.passwd > /dev/null 2>&1
then
exit 0
else
if grep "$username" $0.passwd > /dev/null 2>&1
then
echo "auth-user-pass-verify: Wrong password entered for user '$username'"
else
echo "auth-user-pass-verify: Unknown user '$username'"
fi
exit 1
fi
Now create username and password in /etc/openvpn/example.sh.passwd with following content
userone:securepassworduserone
usertwo:securepasswordusertwo
Now create a client file and import and connect using your password, but this where I am stack as I don't want to provide client file.
I am completely new in usung of Elastcalert. I am trying to use Elasticalert for striking email when no log is sent to logstash from my client server. I have successfully installed Elastcalert on my master server. However, when I run elastalert-create-index I get following error:
Traceback (most recent call last):
File "/usr/bin/elastalert-create-index", line 11, in <module>
load_entry_point('elastalert==0.1.21', 'console_scripts', 'elastalert-
create-index')()
File "/usr/lib/python2.7/site-packages/elastalert-0.1.21-
py2.7.egg/elastalert/create_index.py", line 77, in main
username = args.username if args.username else data.get('es_username')
UnboundLocalError: local variable 'data' referenced before assignment
My config.yaml is as follow:
# This is the folder that contains the rule yaml files
# Any .yaml file will be loaded as a rule
rules_folder: example_rules
# How often ElastAlert will query Elasticsearch
# The unit can be anything from weeks to seconds
run_every:
minutes: 1
# ElastAlert will buffer results from the most recent
# period of time, in case some log sources are not in real time
buffer_time:
minutes: 15
# The Elasticsearch hostname for metadata writeback
# Note that every rule can have its own Elasticsearch host
es_host: localhost
# The Elasticsearch port
es_port: 9200
# The AWS region to use. Set this when using AWS-managed elasticsearch
#aws_region: us-east-1
# The AWS profile to use. Use this if you are using an aws-cli profile.
# See http://docs.aws.amazon.com/cli/latest/userguide/cli-chap-getting-
started.html
# for details
#profile: test
# Optional URL prefix for Elasticsearch
#es_url_prefix: elasticsearch
# Connect with TLS to Elasticsearch
#use_ssl: True
# Verify TLS certificates
#verify_certs: True
# GET request with body is the default option for Elasticsearch.
# If it fails for some reason, you can pass 'GET', 'POST' or 'source'.
# See http://elasticsearch-py.readthedocs.io/en/master/connection.html?
highlight=send_get_body_as#transport
# for details
#es_send_get_body_as: GET
# Option basic-auth username and password for Elasticsearch
#es_username:
#es_password:
# Use SSL authentication with client certificates client_cert must be
# a pem file containing both cert and key for client
#verify_certs: True
#ca_certs: /path/to/cacert.pem
#client_cert: /path/to/client_cert.pem
#client_key: /path/to/client_key.key
# The index on es_host which is used for metadata storage
# This can be a unmapped index, but it is recommended that you run
# elastalert-create-index to set a mapping
writeback_index: elastalert_status
# If an alert fails for some reason, ElastAlert will retry
# sending the alert until this time period has elapsed
alert_time_limit:
days: 2
Did you try running elastalert-create-index without any arguments? It guides you through the setup process like this:
$>elastalert-create-index
Enter Elasticsearch host: localhost
Enter Elasticsearch port: 9200
Use SSL? t/f: f
Enter optional basic-auth username (or leave blank):
Enter optional basic-auth password (or leave blank):
Enter optional Elasticsearch URL prefix (prepends a string to the URL of every request):
New index name? (Default elastalert_status)
Name of existing index to copy? (Default None)
Elastic Version:6
Mapping used for string:{'type': 'keyword'}
New index elastalert_status created
Done!
I have a ami which need username/password for login via ssh. I want to create new amis from this, in which I can login from any newly created keypairs.
Any suggestions?
I'm not sure what AMI allows username/password login, but when you create an instance from an AMI, you need to specify a key pair.
That key will be ADDED to the authorized_keys for the default user (ec2-user for Amazon Linux, ubuntu for the Ubuntu AMI, etc).
Why you don't just add the users/password to the instance and then build your AMI from there? Then you can change your /etc/ssh/sshd_config and permit username passwords with this: PasswordAuthentication yes. Btw, Username/Password authentication is not recommended for servers in the cloud because of man in the middle attacks. (use it at your own risk)
Not sure if I understand the question fully, but if you want to change the behavior of the instance when it boots up I suggest you look at fuzzing with cloud-init. The configuration in the instance is under /etc/cloud/cloud.cfg. For example on on Ubuntu the default says something like this:
user: ubuntu
disable_root: 1
preserve_hostname: False
...
If you want to change the default user you can change it there
user: <myuser>
disable_root: 1
preserve_hostname: False
...
The simplest way is to do this is by adding the following snippet in to the /etc/rc.local or its equivalent.
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
if [ ! -d /root/.ssh ] ; then
mkdir -p /root/.ssh
chmod 0700 /root/.ssh
fi
# Fetch public key using HTTP
curl -f http://169.254.169.254/latest/meta-data/public-keys/0/openssh-key > /tmp/aws-key 2>/dev/null
if [ $? -eq 0 ] ; then
cat /tmp/aws-key >> /root/.ssh/authorized_keys
chmod 0600 /root/.ssh/authorized_keys
fi
rm -f /tmp/aws-key
# or fetch public key using the file in the ephemeral store:
if [ -e /mnt/openssh_id.pub ] ; then
cat /mnt/openssh_id.pub >> /root/.ssh/authorized_keys
chmod 0600 /root/.ssh/authorized_keys
fi
I'd like to set up Loggly to run on AWS Elastic Beanstalk, but can't find any information on how to do this. Is there any guide anywhere, or some general guidance on how to start?
This is how I do it, for papertrailapp.com (which I prefer instead of loggly). In your /ebextensions folder (see more info) you create logs.config, where specify:
container_commands:
01-set-correct-hostname:
command: hostname www.example.com
02-forward-rsyslog-to-papertrail:
# https://papertrailapp.com/systems/setup
command: echo "*.* #logs.papertrailapp.com:55555" >> /etc/rsyslog.conf
03-enable-remote-logging:
command: echo -e "\$ModLoad imudp\n\$UDPServerRun 514\n\$ModLoad imtcp\n\$InputTCPServerRun 514\n\$EscapeControlCharactersOnReceive off" >> /etc/rsyslog.conf
04-restart-syslog:
command: service rsyslog restart
55555 should be replaced with the UDP port number provided by papertrailapp.com. Every time after new instance bootstrap this config will be applied. Then, in your log4j.properties:
log4j.rootLogger=WARN, SYSLOG
log4j.appender.SYSLOG=org.apache.log4j.net.SyslogAppender
log4j.appender.SYSLOG.facility=local1
log4j.appender.SYSLOG.header=true
log4j.appender.SYSLOG.syslogHost=localhost
log4j.appender.SYSLOG.layout=org.apache.log4j.PatternLayout
log4j.appender.SYSLOG.layout.ConversionPattern=[%p] %t %c: %m%n
I'm not sure whether it's an optimal solution. Read more about this mechanism in jcabi-beanstalk-maven-plugin
You can also use the installation script from loggly itself.
The setup below follows the instructions for the legacy setup on https://www.loggly.com/docs/configure-syslog-script/ with minor changes (no confirmation prompts, sudo command replaced since no tty is available)
(edit: updated link, seems to be an outdated solution now in loggly docs)
Place the following script in .ebextensions/loggly.config
Replace TOKEN and ACCOUNT with your own.
#
# Install loggly.com on AWS Elastic Beanstalk
# Tested with node.js environment
# Save this file as .ebextensions/loggly.config
# Deploy per normal scripts or aws.push. To help debug the push, ssh & tail /var/log/cfn-init.log
# See Also /var/log/eb-tools.log
#
commands:
01_loggly_dl:
command: wget -q -O /tmp/loggly.py https://www.loggly.com/install/configure-syslog.py
02_loggly_config:
command: su --session-command="python /tmp/loggly.py setup --auth TOKEN --account ACCOUNT --yes"
Here is a link to loggly support site for using syslogd with loggly:
http://wiki.loggly.com/loggingconfiguration
or using the loggly api with your own app:
http://wiki.loggly.com/apidocumention
Here is an elasticbeanstalk config for Loggly that I've just started using thanks to pointers from this thread and the logging SaaS vendors setup instructions. [Loggly Config Mgmt, Papertrail rsyslog ]
Save the file as loggly.config in the .ebextensions directory and make sure to check the YAML formatting conventions (no tabs, etc). Substitute your Loggly TCP port number, username, password and domain name into the angle brackets as required.
Note that for AWS ruby versions of elasticbeanstalk, there may be differences in the EC2 /etc/rsyslog setup. For example, if /etc/rsyslog.d already exists, and there is already an "$IncludeConfig /etc/rsyslog.d/*.conf" directive, then command "01-forward-rsyslog-to-loggly:" can be removed.
Deploy per normal scripts or aws.push. To help debug the push, ssh & tail /var/log/cfn-init.log
files:
"/etc/rsyslog.d/90-loggly.conf" :
mode: "000664"
owner: root
group: root
content: |
# ### begin forwarding rule ###
# The statement between the begin ... end define a SINGLE forwarding
# rule. They belong together, do NOT split them. If you create multiple
# forwarding rules, duplicate the whole block!
# Remote Logging (we use TCP for reliable delivery)
#
# An on-disk queue is created for this action. If the remote host is
# down, messages are spooled to disk and sent when it is up again.
$WorkDirectory /var/lib/rsyslog # where to place spool files
$ActionQueueFileName fwdRule1 # unique name prefix for spool files
$ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible)
$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
$ActionQueueType LinkedList # run asynchronously
$ActionResumeRetryCount -1 # infinite retries if host is down
*.* ##logs.loggly.com:<yourportnum> # !!!Loggly supplied port number for each app!!!
# ### end of the forwarding rule ###
encoding: plain
"/tmp/loggly.py" :
mode: "000755"
owner: root
group: root
content: |
import json
import sys
import urllib2
'''
Auto-authenticate Syslog TCP inputs.
Usage: python inputs.py -u user -p pass -s subdomain
'''
state = None
params = {}
for i in range(len(sys.argv)):
arg = sys.argv[i]
if state:
params[state] = arg
state = None
if arg == '--username' or arg == '-u':
state = 'username'
if arg == '--password' or arg == '-p':
state = 'password'
if arg == '--subdomain' or arg == '-s':
state = 'subdomain'
url = 'https://%s.loggly.com/api/inputs' % params['subdomain']
password_mgr = urllib2.HTTPPasswordMgrWithDefaultRealm()
password_mgr.add_password(None, url, params['username'], params['password'])
handler = urllib2.HTTPBasicAuthHandler(password_mgr)
opener = urllib2.build_opener(handler)
opener.open(url)
urllib2.install_opener(opener)
inputs = json.loads(urllib2.urlopen(url).read())
for input in inputs:
if input['service']['name'] == 'syslogtcp':
url = 'https://%s.loggly.com/api/inputs/%d/adddevice' % \
(params['subdomain'], input['id'])
response = urllib2.urlopen(url, {}).read()
print response
encoding: plain
commands:
01-forward-rsyslog-to-loggly:
# http://loggly.com/support/sending-data/logging-from/syslog/rsyslog/cd
command: test "$(grep -s '90-loggly.conf' /etc/rsyslog.conf)" == "" && echo -e "\n# Include the loggly.conf file\n\$IncludeConfig /etc/rsyslog.d/90-loggly.conf" >> /etc/rsyslog.conf
02-restart-syslog:
command: service rsyslog restart
03-inform_loggly:
command: "python /tmp/loggly.py -u <Yourloginname> -p <Yourpassword> -s <Yourdomainname>"
Typically, /etc/rsyslog.config will have a "$IncludeConfig /etc/rsyslog.d/*.conf" at the end - so you can simply introduce your own configuration file using the "files:" portion of your .ebextensions file. This works whether you are deploying to fresh servers or not.
For a ruby production.log, you might have something like this in a .ebextensions/01loggly.config file. Note this picks up your beanstalk environment name too as a loggly tag.
# For docs on eb configs, see http://docs.aws.amazon.com/elasticbeanstalk/latest/dg/customize-containers-ec2.html
# This set of commands sets up loggly forwarding
files:
"/etc/rsyslog.d/myapp-loggly.conf" :
mode: "000664"
owner: root
group: root
content: |
$template LogglyFormat,"<%pri%>%protocol-version% %timestamp:::date-rfc3339% %HOSTNAME% %app-name% %procid% %msgid% [yourlogglyid#41058 tag=`{ "Ref" : "AWSEBEnvironmentName" }`] %msg%\n"
*.* ##logs-01.loggly.com:514;LogglyFormat
# One time config
$ModLoad imfile
$InputFilePollInterval 10
$PrivDropToGroup adm
$WorkDirectory /var/spool/rsyslog
# Add a tag for file events
# For production.log
$InputFileName /var/app/support/logs/production.log
$InputFileTag production-log
$InputFileStateFile stat-production-log #this must be unique for each file being polled
$InputFileSeverity info
$InputFilePersistStateInterval 20000
$InputRunFileMonitor
# Send to Loggly then discard
if $programname == 'myapp-production-log' then ##logs-01.loggly.com:514;LogglyFormat
if $programname == 'myapp-production-log' then ~
encoding: plain
commands:
00-make-work-directory:
command: mkdir -p /var/spool/rsyslog
01-restart-syslog:
command: service rsyslog restart
For Tomcat, you might do something like this in a .ebextesions/01logglyg.config file:
# For docs on eb configs, see http://docs.aws.amazon.com/elasticbeanstalk/latest/dg/customize-containers-ec2.html
# This set of commands sets up loggly forwarding
files:
"/etc/rsyslog.d/mytomcatapp-loggly.conf" :
mode: "000664"
owner: root
group: root
content: |
$template LogglyFormat,"<%pri%>%protocol-version% %timestamp:::date-rfc3339% %HOSTNAME% %app-name% %procid% %msgid% [yourlogglygidhere#41058 tag=`{ "Ref" : "AWSEBEnvironmentName" }`] %msg%\n"
*.* ##logs-01.loggly.com:514;LogglyFormat
# One time config
$ModLoad imfile
$InputFilePollInterval 10
$PrivDropToGroup adm
$WorkDirectory /var/spool/rsyslog
# catalina.log
$InputFileName /var/log/tomcat7/catalina.log
$InputFileTag catalina-log
$InputFileStateFile stat-catalina-log
$InputFileSeverity info
$InputFilePersistStateInterval 20000
$InputRunFileMonitor
if $programname == 'catalina-log' then ##logs-01.loggly.com:514;LogglyFormat
if $programname == 'catalina-log' then ~
# catalina.out
$InputFileName /var/log/tomcat7/catalina.out
$InputFileTag catalina-out
$InputFileStateFile stat-catalina-out
$InputFileSeverity info
$InputFilePersistStateInterval 20000
$InputRunFileMonitor
if $programname == 'catalina-out' then ##logs-01.loggly.com:514;LogglyFormat
if $programname == 'catalina-out' then ~
# host-manager.log
$InputFileName /var/log/tomcat7/host-manager.log
$InputFileTag host-manager
$InputFileStateFile stat-host-manager
$InputFileSeverity info
$InputFilePersistStateInterval 20000
$InputRunFileMonitor
if $programname == 'host-manager' then ##logs-01.loggly.com:514;LogglyFormat
if $programname == 'host-manager' then ~
# initd.log
$InputFileName /var/log/tomcat7/initd.log
$InputFileTag initd
$InputFileStateFile stat-initd
$InputFileSeverity info
$InputFilePersistStateInterval 20000
$InputRunFileMonitor
if $programname == 'initd' then ##logs-01.loggly.com:514;LogglyFormat
if $programname == 'initd' then ~
# localhost.log
$InputFileName /var/log/tomcat7/localhost.log
$InputFileTag localhost-log
$InputFileStateFile stat-localhost-log
$InputFileSeverity info
$InputFilePersistStateInterval 20000
$InputRunFileMonitor
if $programname == 'localhost-log' then ##logs-01.loggly.com:514;LogglyFormat
if $programname == 'localhost-log' then ~
# manager.log
$InputFileName /var/log/tomcat7/manager.log
$InputFileTag manager
$InputFileStateFile stat-manager
$InputFileSeverity info
$InputFilePersistStateInterval 20000
$InputRunFileMonitor
if $programname == 'manager' then ##logs-01.loggly.com:514;LogglyFormat
if $programname == 'manager' then ~
encoding: plain
commands:
00-make-work-directory:
command: mkdir -p /var/spool/rsyslog
01-restart-syslog:
command: service rsyslog restart
This config is working for me - though I haven't yet determined how to get multi-line entries coming into a single entry in Loggly yet.
I know this is question is fairly old but I found that the answers really didnt answer the question or just plain didnt work correctly when implemented. I found that this works (file .ebextenstions/02loggly.config):
container_commands:
01-transform-rsyslog.conf:
command: sed "s/NODE_ENV/$NODE_ENV/g" scripts/22-loggly.conf.temp > scripts/22-loggly.conf
02-setup-rsyslog.conf:
command: cp scripts/22-loggly.conf /etc/rsyslog.d/22-loggly.conf
03-restart:
command: /sbin/service rsyslog restart
the "01-transform-rsyslog.conf" step is optional; I use that to set a tag by NODE_ENV in the file. "22-loggly.conf.temp" is a modified version of the "22-loggly.conf" file that gets created at "/etc/rsyslog.d/" when you run the linux source setup script (https://www.loggly.com/install/configure-syslog.py). I just installed it on a ec2 instance and copied the file.
Note I had to prepend '/sbin' to my service command because it was failing for me without it. Also, this restarts syslog on every deploy, which should be fine.
Now you just have to make sure your app logs to syslog. For Java it is going to be log4j or similar. For Node.js (which is what I'm using), rconsole works (https://github.com/tblobaum/rconsole).
None of the things I tried seemed to work, and the loggly documentation is very confusing!
I hope that this will help someone, this is how I got it to work.
Paste the following in .ebextensions/loggly.config
files:
"/etc/rsyslog.conf" :
mode: "000644"
owner: root
group: root
content: |
$ModLoad imfile
$InputFilePollInterval 10
$PrivDropToGroup adm
# Input for FILE.LOG
$InputFileName /var/app/current/PATH_TO_YOUR_LOG_FILE
$InputFileTag social_php:
$InputFileStateFile stat-social_php #this must be unique for each file being polled
$InputFileSeverity info
$InputRunFileMonitor
#Add a tag for events from this file
$template LogglyFormatsocial_php,"<%pri%>%protocol-version% %timestamp:::date-rfc3339% %HOSTNAME% %app-name% %procid% %msgid% [TOKEN#41058 tag=\"php_log\"] %msg%\n"
if $programname == 'social_php' then ##logs.loggly.com:37146;LogglyFormatsocial_php
if $programname == 'social_php' then ~
*.* ##logs.loggly.com:37146
commands:
01-restart-syslog:
command: service rsyslog restart
Replace all instances of social_php with the tag that makes sense for your application.
Replace /var/app/current/PATH_TO_YOUR_LOG_FILE with your log file location
Follow my loggly configuration in elasticbeanstalk. For Linux + log4j
on .ebextensions file configuration
container_commands:
01_configure_sudo_access:
command: sed -i -- 's/ requiretty/ \!requiretty/g' /etc/sudoers
02_loggy_configure:
command: sudo python .ebextensions/scripts/loggly_config.py
03_restore_sudo_access:
command: sed -i -- 's/ \!requiretty/ requiretty/g' /etc/sudoers
Loggly script in python for default AMI:
import os
rsyslog_path = '/etc/rsyslog.conf'
loggly_file_path = '/etc/rsyslog.d/22-loggly.conf'
class LogglyConfig:
def __init__(self):
self.__linux_log()
self.__config_loggly_for_log4j()
def __linux_log(self):
#not installed on this machine
if not os.path.exists(loggly_file_path):
os.system('rm -f configure-linux.sh')
os.system('wget https://www.loggly.com/install/configure-linux.sh')
os.system('sudo bash configure-linux.sh -a DOMAIN -t TOKEN -u USER -p PASSWORD -s')
def __config_loggly_for_log4j(self):
f = open(rsyslog_path,'r')
file_text = f.read()
f.close()
file_text = file_text.replace('#$ModLoad imudp', '$ModLoad imudp')
file_text = file_text.replace('#$UDPServerRun 514', '$UDPServerRun 514')
f = open(rsyslog_path,'w')
f.write(file_text)
f.close()
os.system('service rsyslog restart')
LogglyConfig()
In log4j.properties on your java project
log4j.rootLogger=INFO, SYSLOG
log4j.appender.SYSLOG=org.apache.log4j.net.SyslogAppender
log4j.appender.SYSLOG.SyslogHost=localhost
log4j.appender.SYSLOG.Facility=Local3
log4j.appender.SYSLOG.Header=true
log4j.appender.SYSLOG.layout=org.apache.log4j.PatternLayout
log4j.appender.SYSLOG.layout.ConversionPattern=java %d{ISO8601} %p %t %c{1}.%M - %m%n