I have to extract information from a text file.
In the text file there is a list of strings.
This is an example of a string: AAA101;2015-01-01 00:00:00;0.784
The value after the last ; is a non integer value, which changes from line to line, so every line has different lenght of characters.
I want to map all of these lines into a structured vector as I can access to a specific line anytime I need without scan the whole file again.
I did some research and I found some threads about a command called, which permit me to reach a specific line of a text file but I read it only works if any line has the same characters lenght of the others.
I was thinking about converting all the lines in the file in a proper format in order to be able to map that file as I want but I hope there is a better and quick way
You can try TStringList*. It creates a list of AnsiStrings. Then each AnsiString can be accessed via ->operator [](numberOfTheLine).
Related
C++ program that displays on the screen item codes with corresponding
item descriptions and prices. It asks the user to enter the code of the item
purchased by a customer. It looks for a match of the item code stored in items.txt.
How can I output only a specific line from a text file after the user inputs the item code?
You need to read the file line-by-line (std::getline), extract (depending on the exact format, e.g. by searching for a whitespace in the string) and compare the code and then return the corresponding line on a match.
It is not possible to access lines from a text file directly by index or content.
This is assuming that you mean the file contains lines in the form
code1 item1
code2 item2
//...
If the code is just the index of the line, then you only need to call std::getline in a loop with a loop counter for the current index of the line.
If you do this multiple times on the same file, you should probably parse the whole content first line-by-line into a std::vector<std::string> or a std::(unordered_)map<std::string, std::string> or something similar to avoid the costly repeated iteration.
Depending on the use case, maybe it would be even better to parse the data into a database first and then query the database, even if it is only e.g. sqlite or something like that.
I would like to read a text file in C++ in following manner:
Ignore the entire first line as it is simply meant as an introduction.
Only read the following lines from a specific position.
That starting position for reading is a fixed one and remains the same for every line; however, the numbers after that may be of variable length. I need to save all of these numbers from line 2 to line n into an Array.
At the moment I can read a regular 2D Array with getline.
How can I work around these things?
An example for a line I want to read could be:
Person1: 25 988.3 0.0023 7
To set the file to a position, use std::ifstream::seekg().
To set the file to the beginning of a line, you must read and count the line endings. Many text files have variable length text lines.
How can I work around these things?
You can't, unless you can ensure that all of the data lines after the first line are all the same length.
If you can't ensure that, then all you can do is read through all of the preceding lines.
An alternative I have employed in the past is to generate an 'index' of line start positions in a secondary file in binary format (so that I CAN jump directly to the right place in that file), and use that to jump to the right place in the text file. Of course that means that you need to regenerate that index file every time you replace/amend the data file.
myfile<<hashdugumu[key].numara;
I have this piece of code.For example,i would like to write to eighth line.How do i do that in c++ ?Thanks in advance.
If the line you want to write is exactly the same length (in bytes, not in characters, remember some encodings (like e.g. UTF-8) is variable length) then it's very easy: Just skip over the first seven lines and then write the line.
There is a caveat with this though: input streams and output streams have different stream positions. So if you read from a combined input/output file stream then only the read position will change, so if you just try to write directly then you will not write at the same position. To solve this you need to get the read position, and set the write position to the same value.
As an alternative, or if the data you want to write is not the same size as the existing data, then you have to use a temporary "buffer", be it another file or an actual in-memory buffer.
If the file is not big you can use an in-memory buffer, for example using a std::vector for the lines. Read each line into the vector, and then modify the lines (elements in the vector) that you want to modify. Finally reopen the file for writing, truncating it, and then just write each "line" to the file.
There is a slight problem with the above though when it comes to the rewriting of the data, and that is if the file is truncated and then there's an error when you write to the file, you can lose data. This can be dsolved by using a temporary file.
Using a temporary file it's easier to not bother with the in-memory buffer, and instead read from the original file and write directly to the temporary file. Knowing when you should write something else is done by keeping track of the current line numbers, which is easy if you read one line at a time. In your example you read the first seven lines from the original file and write them to the temporary file, after the seventh line you write your special eight line while skipping the original eight line from the original file, and then just continue reading/writing the remaining lines. When done close the files and then rename the temporary file as the original file.
I am trying to run a program to replace certain data within a file. The relevant parts of the file attempting to be replaced look like the following:
1 Information 15e+10
2 Information 2e+16
3 Information 6e+2
And so on.
The files in question can be very large in the multiple gigabyte range and to my understanding because of this using a buffer of the whole file and rewriting the whole file is impossible/unreasonable. Well that is all fine I just want to replace the values (ex. the 15e+10).
This all works fine with simple ios::in|ios::out and tellp() if I am replacing the value with a similar sized value (15e+10->12e+12) or even if its a smaller size as I can simply add an extra space which can be ignored down the line (ex. 15e+10->4e+10 ). But I am running into the problem if I need to replace the value with a value whose length is longer than already in the file (ex. 6e+2->16e+10) it will write over the new line character or start writing over the information in the next line.
I have searched on the forums and everyone says you can either overwrite in the file, you can append to the end of the file, or you can buffer and recreate the whole file. Is there anyway I can achieve my goal of overwriting the value correctly without having to recreate the file?
If not then how can I have 2 files open (1 input 1 output) to do this if multiple files in question are too large for the memory?
Note: I would also like to avoid using boost:: as I need to be able to run this on a system without the boost library.
Open a stream to read from the input (IN) file and a second stream (OUT) to write to a new output (tmp) file.
Read from IN and write to OUT. When you get a value from IN that you want to replace write the replacement to OUT instead of the value you got from IN.
When parsing is complete replace the first file with the second (tmp) file.
Would this work for you?
Use lseek()/fseek() for "jump" to a given position in a file.
You can use seekp to go to the location and rewrite it with <<
Example:
example.txt ( |?| = 1 byte of data )
|A|B|C|\n|1|2|3|D|E|F|\n|4|5|6|
//Somewhere in the code
fstream file;
open("example.txt");
//Somehow find the character distance and store it into "distance"
seekp(distance);//If distance = 0, it will go to "A" like rewind() but easier for me
If the distance is 4, the next character will be overwritten is 1
file << "987";
And the file will be
|A|B|C|\n|9|8|7|D|E|F|\n|4|5|6|
BUT the only problem here is when you need to increase/decrease the size:
Increase:
You will overwrite the other character so you need to create a temp string to store it the rest of data or separate it into smaller chunk if the data is too large like
|A|B|C|\n|9|8|7|D|E|F|\n|4|5|6|
string tempstring;
seekp(distance);
file >> tempstring;
seekp(distance);
file << content << tempstring; //content is the data
Decrease:
The easiest solution is to write NULL character \0 to the excess space like
|A|B|C|\n|1|\0|\0|D|E|F|\n|4|5|6|
The only side-effect is the file size is the same as before
Is there a way that I can seek to a certain line in a file to read or write data?
Let's say I want to write some data starting on the 10th line in a text file. There might be some data already in the first few lines, or the file could even be empty. Is there a way I can seek directly to the line I want without having to worry about what's already in the file?
Only if the lines are all the same length (seek to 9 * bytes_per_line). Otherwise, you'll just have to scan your way to the appropriate spot in the file.
Also be wary of writing into the middle of a file. It may not do what you expect (insert new lines). It will simply overwrite whatever content is already there, and won't respect existing line boundaries.
You can seek to a position in a file, but that position must be a character offset from the start, end or current position - see for example fseek(). There is no way of seeking to a particular line, unless all the lines are exactly the same length.
No, you have to process the data to find the line delimiters (unless you have fixed length lines). Have a look at getline(), ftell() and fseek(). http://www.pixelbeat.org/programming/readline/cpp.cpp
The easy best way is to read the file in memory inserting for instance each line in a vector of strings, then modifying/adding whatever you want, and re-write each line in a new file.
(supposing the file fits in memory)