error: no matching function for call - c++

I'm calling a one argument constructor and I'm getting an error that seems to read that I'm calling a no argument constructor (which doesn't and shouldn't exist).
This is the error I'm getting
g++ -g -c predictor.C
In file included from predictor.C:5:
PHT.C: In constructor 'PHT::PHT(int)':
PHT.C:5: error: no matching function for call to'TwoBitPredictorTable::TwoBitPredictorTable()'
TwoBitPredictorTable.C:5: note: candidates are: TwoBitPredictorTable::TwoBitPredictorTable(int)
predictor.h:25: note: TwoBitPredictorTable::TwoBitPredictorTable(const TwoBitPredictorTable&)
Here is the constructor call on line 5 in PHT.C
PHT::PHT(int rows)
{
predictor = TwoBitPredictorTable(rows);
}
The class definition for PHT is:
class PHT
{
TwoBitPredictorTable predictor;
public:
PHT(int rows);
bool update(unsigned int pc, unsigned int ghr, bool outcome);
bool getPrediction(unsigned int pc, unsigned int ghr);
};
The idea is to make a class PHT which wraps a TwoBitPredictorTable.
I'm pretty new to C++, but after hours of searching for an answer, I'm asking for your help. Thanks in advance :)

You need to call the constructor in the initialization list. What you have now is equivalent to:
PHT::PHT(int rows) :
predictor() // <-- error, no default constructor
{
predictor = TwoBitPredictorTable(rows);
}
Instead:
PHT::PHT(int rows) :
predictor(rows)
{
}

Looks like TwoBitPredictorTable has no default constructor. You should use the initializer list to construct TwoBitPredictorTable during PHT construction.
PHT::PHT(int rows) : predictor(rows)
{
}
Should look something like this.

Related

Compiling error in trie constructor [duplicate]

This question already has answers here:
Default value of function parameter
(5 answers)
Closed 5 years ago.
What's the place for the default parameter value? Just in function definition, or declaration, or both places?
Default parameter values must appear on the declaration, since that is the only thing that the caller sees.
EDIT: As others point out, you can have the argument on the definition, but I would advise writing all code as if that wasn't true.
You can do either, but never both. Usually you do it at function declaration and then all callers can use that default value. However you can do that at function definition instead and then only those who see the definition will be able to use the default value.
C++ places the default parameter logic in the calling side, this means that if the default value expression cannot be computed from the calling place, then the default value cannot be used.
Other compilation units normally just include the declaration so default value expressions placed in the definition can be used only in the defining compilation unit itself (and after the definition, i.e. after the compiler sees the default value expressions).
The most useful place is in the declaration (.h) so that all users will see it.
Some people like to add the default value expressions in the implementation too (as a comment):
void foo(int x = 42,
int y = 21);
void foo(int x /* = 42 */,
int y /* = 21 */)
{
...
}
However, this means duplication and will add the possibility of having the comment out of sync with the code (what's worse than uncommented code? code with misleading comments!).
Although this is an "old" thread, I still would like to add the following to it:
I've experienced the next case:
In the header file of a class, I had
int SetI2cSlaveAddress( UCHAR addr, bool force );
In the source file of that class, I had
int CI2cHal::SetI2cSlaveAddress( UCHAR addr, bool force = false )
{
...
}
As one can see, I had put the default value of the parameter "force" in the class source file, not in the class header file.
Then I used that function in a derived class as follows (derived class inherited the base class in a public way):
SetI2cSlaveAddress( addr );
assuming it would take the "force" parameter as "false" 'for granted'.
However, the compiler (put in c++11 mode) complained and gave me the following compiler error:
/home/.../mystuff/domoproject/lib/i2cdevs/max6956io.cpp: In member function 'void CMax6956Io::Init(unsigned char, unsigned char, unsigned int)':
/home/.../mystuff/domoproject/lib/i2cdevs/max6956io.cpp:26:30: error: no matching function for call to 'CMax6956Io::SetI2cSlaveAddress(unsigned char&)'
/home/.../mystuff/domoproject/lib/i2cdevs/max6956io.cpp:26:30: note: candidate is:
In file included from /home/geertvc/mystuff/domoproject/lib/i2cdevs/../../include/i2cdevs/max6956io.h:35:0,
from /home/geertvc/mystuff/domoproject/lib/i2cdevs/max6956io.cpp:1:
/home/.../mystuff/domoproject/lib/i2cdevs/../../include/i2chal/i2chal.h:65:9: note: int CI2cHal::SetI2cSlaveAddress(unsigned char, bool)
/home/.../mystuff/domoproject/lib/i2cdevs/../../include/i2chal/i2chal.h:65:9: note: candidate expects 2 arguments, 1 provided
make[2]: *** [lib/i2cdevs/CMakeFiles/i2cdevs.dir/max6956io.cpp.o] Error 1
make[1]: *** [lib/i2cdevs/CMakeFiles/i2cdevs.dir/all] Error 2
make: *** [all] Error 2
But when I added the default parameter in the header file of the base class:
int SetI2cSlaveAddress( UCHAR addr, bool force = false );
and removed it from the source file of the base class:
int CI2cHal::SetI2cSlaveAddress( UCHAR addr, bool force )
then the compiler was happy and all code worked as expected (I could give one or two parameters to the function SetI2cSlaveAddress())!
So, not only for the user of a class it's important to put the default value of a parameter in the header file, also compiling and functional wise it apparently seems to be a must!
If the functions are exposed - non-member, public or protected - then the caller should know about them, and the default values must be in the header.
If the functions are private and out-of-line, then it does make sense to put the defaults in the implementation file because that allows changes that don't trigger client recompilation (a sometimes serious issue for low-level libraries shared in enterprise scale development). That said, it is definitely potentially confusing, and there is documentation value in presenting the API in a more intuitive way in the header, so pick your compromise - though consistency's the main thing when there's no compelling reason either way.
One more point I haven't found anyone mentioned:
If you have virtual method, each declaration can have its own default value!
It depends on the interface you are calling which value will be used.
Example on ideone
struct iface
{
virtual void test(int a = 0) { std::cout << a; }
};
struct impl : public iface
{
virtual void test(int a = 5) override { std::cout << a; }
};
int main()
{
impl d;
d.test();
iface* a = &d;
a->test();
}
It prints 50
I strongly discourage you to use it like this
the declaration is generally the most 'useful', but that depends on how you want to use the class.
both is not valid.
Good question...
I find that coders typically use the declaration to declare defaults. I've been held to one way (or warned) or the other too based on the compiler
void testFunct(int nVal1, int nVal2=500);
void testFunct(int nVal1, int nVal2)
{
using namespace std;
cout << nVal1 << << nVal2 << endl;
}
You may do in either (according to standard), but remember, if your code is seeing the declaration without default argument(s) before the definition that contains default argument, then compilation error can come.
For example, if you include header containing function declaration without default argument list, thus compiler will look for that prototype as it is unaware of your default argument values and hence prototype won't match.
If you are putting function with default argument in definition, then include that file but I won't suggest that.
Adding one more point. Function declarations with default argument should be ordered from right to left and from top to bottom.
For example in the below function declaration if you change the declaration order then the compiler gives you a missing default parameter error. Reason the compiler allows you to separate the function declaration with default argument within the same scope but it should be in order from RIGHT to LEFT (default arguments) and from TOP to BOTTOM(order of function declaration default argument).
//declaration
void function(char const *msg, bool three, bool two, bool one = false);
void function(char const *msg, bool three = true, bool two, bool one); // Error
void function(char const *msg, bool three, bool two = true, bool one); // OK
//void function(char const *msg, bool three = true, bool two, bool one); // OK
int main() {
function("Using only one Default Argument", false, true);
function("Using Two Default Arguments", false);
function("Using Three Default Arguments");
return 0;
}
//definition
void function(char const *msg, bool three, bool two, bool one ) {
std::cout<<msg<<" "<<three<<" "<<two<<" "<<one<<std::endl;
}

C++ - Smart Pointers - Passing derived class shared pointer to base through template

I have the following and having difficulty resolving the error please help.
i have the following class as template definition somewhere.
template<class ConcreteHandlerType>
class SomeAcceptor: public ACE_Acceptor<ConcreteHandlerType, ACE_SOCK_Acceptor>
In some other file, i initialize this class in the constructor
class initialize {
typedef SomeAcceptor<BaseClassSomeHandler> baseAcceptor_t;
typedef SomeAcceptor<DerivedClassSomeHandler> derivedAcceptor_t;
boost::shared_ptr<baseAcceptor_t;> mAcceptor;
boost::shared_ptr<derivedAcceptor_t;> mDerivedAcceptor;
bool HandleAcceptNotification(BaseClassSomeHandler& someHandler);
initialize() : mAcceptor(0), mDerivedAcceptor(new DerivedAcceptor_t) {
mAcceptor->SetAcceptNotificationDelegate(fastdelegate::MakeDelegate(this, &initialize::HandleAcceptNotification));
}
}
Error i get is
error: no matching function for call to `boost::shared_ptr<SomeAcceptor<BaseClassSomeHandler> >::shared_ptr(int)'common/lib/boost_1_39_0/boost/smart_ptr/shared_ptr.hpp:160: note: candidates are: boost::shared_ptr<SomeAcceptor<BaseClassSomeHandler> >::shared_ptr(const boost::shared_ptr<SomeAcceptor<BaseClassSomeHandler> >&)
common/lib/boost_1_39_0/boost/smart_ptr/shared_ptr.hpp:173: notboost::shared_ptr<T>::shared_ptr() [with T = SomeAcceptor<BaseClassSomeHandler>]
I also tried overloading the function with
bool HandleAcceptNotification(DerivedClassSomeHandler& someHandler);
but because mAcceptor is of type SomeAcceptor BaseClassSomeHandler, i get this error, but to fix this.
I guess i need to cast it somehow, but how to do it?
i tried doing like below inside the constructor and it didn't work
initialize() : mAcceptor(0), mDerivedAcceptor(new DerivedAcceptor_t) {
mAcceptor = mDerivedAcceptor; // Error here
mAcceptor->SetAcceptNotificationDelegate(fastdelegate::MakeDelegate(this, &initialize::HandleAcceptNotification));
}
From your code, it looks like you want mAcceptor to be assigned NULL (0), if that is the case you don't need to initialize it at all, as the default constructor will take care of that. But, since you call a function on that (NULL) pointer immediately, its not immediately clear exactly what you want to do.
If you want mAcceptor and mDerivedAcceptor to point to the same (shared) object and assuming DerivedClassSomeHandler is derived from BaseClassSomeHandler, this is a situation where you should use boost::shared_static_cast, as described here.
There's also some good information in this apparently related question.
The error is due to the mAcceptor(0) in
initialize() : mAcceptor(0), mDerivedAcceptor(new DerivedAcceptor_t) {
mAcceptor->SetAcceptNotificationDelegate(fastdelegate::MakeDelegate(this, &initialize::HandleAcceptNotification));
}
The smart_ptr default constructor assigns the wrapped ptr to NULL, so leave out mAcceptor(0) from the initialization list.
boost::shared_ptr<SomeAcceptor<BaseClassSomeHandler> >::shared_ptr(int)
It's yelling at you that there's no constructor that accepts an int.
Just use: mAcceptor()

error: no matching function for call to

I am getting the "no matching function for call to error" in my code. The code is creating instances of one class in the constructor of another class.
The code is as follows:
inline DiscriminatorContainer::DiscriminatorContainer(ushort id, FebPtr feb):
m_id(id), m_feb(feb), m_discriminators(new Discriminators()) {
//make discriminators
for (ushort i = 0; i <kNDiscriminators; ++i){
DiscriminatorPtr dsc = DiscriminatorPtr(new Discriminator(i, this));
m_discriminators->push_back(dsc);
}
}
inline Discriminator::Discriminator(ushort id, DiscriminatorContainerPtr dc, double threshold) :
m_id(id), m_threshold(threshold),
m_nhits(0), m_dc(dc)
{
init();
}
These constructors are actually in two different header files, but I included both for completeness.
I get the error
../src/DiscriminatorContainer.h:50: error: no matching function for call to `Minerva::Discriminator::Discriminator(ushort&, Minerva::DiscriminatorContainer* const)'
../src/Discriminator.h:24: note: candidates are: Minerva::Discriminator::Discriminator(const Minerva::Discriminator&)
../src/Discriminator.h:61: note: Minerva::Discriminator::Discriminator(ushort, Minerva::DiscriminatorContainerPtr, double)
about the line that goes DiscriminatorPtr dsc = ....
I know that such an error usually means I've got a wrong data type somewhere, but I can't figure out where it could be?
Typical case of "read the error message more carefully".
It's telling you that you are trying to call the function with the signature Minerva::Discriminator::Discriminator(ushort&, Minerva::DiscriminatorContainer* const)
but there only exists two other constructors
Minerva::Discriminator::Discriminator(const Minerva::Discriminator&)
Minerva::Discriminator::Discriminator(ushort, Minerva::DiscriminatorContainerPtr, double)
So just check the call to the constructor. You probably forget one argument.
new Discriminator(i, this) does not match any constructors.
Edit
Well, inlining doesn't affect default arguments so you must have made a mistake somewhere else!

Where to put default parameter value in C++? [duplicate]

This question already has answers here:
Default value of function parameter
(5 answers)
Closed 5 years ago.
What's the place for the default parameter value? Just in function definition, or declaration, or both places?
Default parameter values must appear on the declaration, since that is the only thing that the caller sees.
EDIT: As others point out, you can have the argument on the definition, but I would advise writing all code as if that wasn't true.
You can do either, but never both. Usually you do it at function declaration and then all callers can use that default value. However you can do that at function definition instead and then only those who see the definition will be able to use the default value.
C++ places the default parameter logic in the calling side, this means that if the default value expression cannot be computed from the calling place, then the default value cannot be used.
Other compilation units normally just include the declaration so default value expressions placed in the definition can be used only in the defining compilation unit itself (and after the definition, i.e. after the compiler sees the default value expressions).
The most useful place is in the declaration (.h) so that all users will see it.
Some people like to add the default value expressions in the implementation too (as a comment):
void foo(int x = 42,
int y = 21);
void foo(int x /* = 42 */,
int y /* = 21 */)
{
...
}
However, this means duplication and will add the possibility of having the comment out of sync with the code (what's worse than uncommented code? code with misleading comments!).
Although this is an "old" thread, I still would like to add the following to it:
I've experienced the next case:
In the header file of a class, I had
int SetI2cSlaveAddress( UCHAR addr, bool force );
In the source file of that class, I had
int CI2cHal::SetI2cSlaveAddress( UCHAR addr, bool force = false )
{
...
}
As one can see, I had put the default value of the parameter "force" in the class source file, not in the class header file.
Then I used that function in a derived class as follows (derived class inherited the base class in a public way):
SetI2cSlaveAddress( addr );
assuming it would take the "force" parameter as "false" 'for granted'.
However, the compiler (put in c++11 mode) complained and gave me the following compiler error:
/home/.../mystuff/domoproject/lib/i2cdevs/max6956io.cpp: In member function 'void CMax6956Io::Init(unsigned char, unsigned char, unsigned int)':
/home/.../mystuff/domoproject/lib/i2cdevs/max6956io.cpp:26:30: error: no matching function for call to 'CMax6956Io::SetI2cSlaveAddress(unsigned char&)'
/home/.../mystuff/domoproject/lib/i2cdevs/max6956io.cpp:26:30: note: candidate is:
In file included from /home/geertvc/mystuff/domoproject/lib/i2cdevs/../../include/i2cdevs/max6956io.h:35:0,
from /home/geertvc/mystuff/domoproject/lib/i2cdevs/max6956io.cpp:1:
/home/.../mystuff/domoproject/lib/i2cdevs/../../include/i2chal/i2chal.h:65:9: note: int CI2cHal::SetI2cSlaveAddress(unsigned char, bool)
/home/.../mystuff/domoproject/lib/i2cdevs/../../include/i2chal/i2chal.h:65:9: note: candidate expects 2 arguments, 1 provided
make[2]: *** [lib/i2cdevs/CMakeFiles/i2cdevs.dir/max6956io.cpp.o] Error 1
make[1]: *** [lib/i2cdevs/CMakeFiles/i2cdevs.dir/all] Error 2
make: *** [all] Error 2
But when I added the default parameter in the header file of the base class:
int SetI2cSlaveAddress( UCHAR addr, bool force = false );
and removed it from the source file of the base class:
int CI2cHal::SetI2cSlaveAddress( UCHAR addr, bool force )
then the compiler was happy and all code worked as expected (I could give one or two parameters to the function SetI2cSlaveAddress())!
So, not only for the user of a class it's important to put the default value of a parameter in the header file, also compiling and functional wise it apparently seems to be a must!
If the functions are exposed - non-member, public or protected - then the caller should know about them, and the default values must be in the header.
If the functions are private and out-of-line, then it does make sense to put the defaults in the implementation file because that allows changes that don't trigger client recompilation (a sometimes serious issue for low-level libraries shared in enterprise scale development). That said, it is definitely potentially confusing, and there is documentation value in presenting the API in a more intuitive way in the header, so pick your compromise - though consistency's the main thing when there's no compelling reason either way.
One more point I haven't found anyone mentioned:
If you have virtual method, each declaration can have its own default value!
It depends on the interface you are calling which value will be used.
Example on ideone
struct iface
{
virtual void test(int a = 0) { std::cout << a; }
};
struct impl : public iface
{
virtual void test(int a = 5) override { std::cout << a; }
};
int main()
{
impl d;
d.test();
iface* a = &d;
a->test();
}
It prints 50
I strongly discourage you to use it like this
the declaration is generally the most 'useful', but that depends on how you want to use the class.
both is not valid.
Good question...
I find that coders typically use the declaration to declare defaults. I've been held to one way (or warned) or the other too based on the compiler
void testFunct(int nVal1, int nVal2=500);
void testFunct(int nVal1, int nVal2)
{
using namespace std;
cout << nVal1 << << nVal2 << endl;
}
You may do in either (according to standard), but remember, if your code is seeing the declaration without default argument(s) before the definition that contains default argument, then compilation error can come.
For example, if you include header containing function declaration without default argument list, thus compiler will look for that prototype as it is unaware of your default argument values and hence prototype won't match.
If you are putting function with default argument in definition, then include that file but I won't suggest that.
Adding one more point. Function declarations with default argument should be ordered from right to left and from top to bottom.
For example in the below function declaration if you change the declaration order then the compiler gives you a missing default parameter error. Reason the compiler allows you to separate the function declaration with default argument within the same scope but it should be in order from RIGHT to LEFT (default arguments) and from TOP to BOTTOM(order of function declaration default argument).
//declaration
void function(char const *msg, bool three, bool two, bool one = false);
void function(char const *msg, bool three = true, bool two, bool one); // Error
void function(char const *msg, bool three, bool two = true, bool one); // OK
//void function(char const *msg, bool three = true, bool two, bool one); // OK
int main() {
function("Using only one Default Argument", false, true);
function("Using Two Default Arguments", false);
function("Using Three Default Arguments");
return 0;
}
//definition
void function(char const *msg, bool three, bool two, bool one ) {
std::cout<<msg<<" "<<three<<" "<<two<<" "<<one<<std::endl;
}

error: no matching function for call to

i want to use a method of anothre class in another one,but i get error below,whats the problem?
TIA
error: no matching function for call to ‘PositionInfo::PositionInfo()’
here is my code:
PositionInfo Pos;
double metr=Pos.GetBallDistToTeammate(5);
and PositionInfo.h class is:
PositionInfo(WorldState *pWorldState, InfoState *pInfoState);
and PositionInfo.cpp class is:
const double & GetBallDistToTeammate(Unum unum) const { Assert(unum > 0); return GetBallDistToPlayer(unum); }
Default constructor PositionInfo::PositionInfo() { /* code */} is missing in your cpp file.
error: no matching function for call to ‘PositionInfo::PositionInfo()’
This seems like someone tries to call a default constructor for the class, but the compiler cannot find one.