I've try to create AMI using ansible-playbook, i've already export aws secret key & access into path and ansible version is 2.0.0.
- hosts: localhost
tasks:
- name: create ami
ec2_ami:
region: "ap-southeast-1"
instance_id: "i-c2xxxx"
name: "jmicro"
wait: yes
register: ami
but when i run command : ansible-playbook create_ami.yml, i get this error :
ERROR: Syntax Error while loading YAML script, create_ami.yml
Note: The error may actually appear before this position: line 5, column 1
ec2_ami:
region: "ap-southeast-1"
is there something wrong with my yaml script ? but when i run :
# ansible localhost -m ec2_ami -a "instance_id=i-c2xxxx region=ap-southeast-1 wait=yes name=jmicro"
it's success !!
There are some strange characters in front of tasks. Don't know what that is but when I copy your code block and paste it into my editor, then try to remove the whitespaces with Backspace, it actually deletes the characters on the right side of the curser.
YAML only allows whitespaces for indenting lines. I think that is the issue here. And tasks needs to be on the same level as hosts. Other than that your definition looks OK to me.
- hosts: localhost
tasks:
- name: create ami
ec2_ami:
region: "ap-southeast-1"
instance_id: "i-c2xxxx"
name: "jmicro"
wait: yes
register: ami
Related
I am working on an Ansible project in which I would like to add to my Auto-scaling group an existing EC2 instance found by tag-Name. I was able to find it with an AMI or terminating the old instances. But I am simply looking for a way to add them to auto-scaling group like in web management console. Where I just right click on instance, select settings, attach it to auto-scaling group. Below code is all in 1 file.
Find EC2 instances:
- hosts: localhost
connection: local
gather_facts: no
tasks:
- ec2_remote_facts:
region: eu-central-1
filters:
"tag:Name": Ubuntu_From_AMI
register: ec2found
- name: Add found instances to group
add_host: hostname="{{ item.public_ip_address }}" groups=ec2instances
with_items: "{{ ec2found.instances }}"
Here is how I am adding the auto-scaling group :
- hosts: localhost
connection: local
gather_facts: no
tasks:
- name: Add auto-scaling groups.
ec2_asg:
name: magento_scaling_group
load_balancers: 'LB_NAME'
availability_zones: [ 'eu-central-1a', 'eu-central-1b', 'eu-central-1c' ]
launch_config_name: "{{ lc.name }}"
min_size: 0
max_size: 5
desired_capacity: 0
vpc_zone_identifier: [ 'subnet-e712ad8c', 'subnet-e12e8dac', 'subnet-28e91a55' ]
tags:
- environment: production
propagate_at_launch: no
Is it possible? Thank you.
Based on the current list of modules, it appears there is no such functionality. You'll need to create a new module or just cheat and use the aws cli in a normal command: invocation. If you go the route of creating a new module, please do consider submitting it as a PR to the Ansible project so others will benefit from your work.
I have used Ansible to create 1 AWS EC2 instance using the examples in the Ansible ec2 documentation. I can successfully create the instance with a tag. Then I temporarily add it to my local inventory group using add_host.
After doing this, I am having trouble when I try to configure the newly created instance. In my Ansible play, I would like to specify the instance by its tag name. eg. hosts: <tag_name_here>, but I am getting an error.
Here is what I have done so far:
My directory layout is
inventory/
staging/
hosts
group_vars/
all/
all.yml
site.yml
My inventory/staging/hosts file is
[local]
localhost ansible_connection=local ansible_python_interpreter=/home/localuser/ansible_ec2/.venv/bin/python
My inventory/staging/group_vars/all/all.yml file is
---
ami_image: xxxxx
subnet_id: xxxx
region: xxxxx
launched_tag: tag_Name_NginxDemo
Here is my Ansible playbook site.yml
- name: Launch instance
hosts: localhost
gather_facts: no
tasks:
- ec2:
key_name: key-nginx
group: web_sg
instance_type: t2.micro
image: "{{ ami_image }}"
wait: true
region: "{{ region }}"
vpc_subnet_id: "{{ subnet_id }}"
assign_public_ip: yes
instance_tags:
Name: NginxDemo
exact_count: 1
count_tag:
Name: NginxDemo
exact_count: 1
register: ec2
- name: Add EC2 instance to inventory group
add_host:
hostname: "{{ item.public_ip }}"
groupname: tag_Name_NginxDemo
ansible_user: centos_user
ansible_become: yes
with_items: "{{ ec2.instances }}"
- name: Configure EC2 instance in launched group
hosts: tag_Name_NginxDemo
become: True
gather_facts: no
tasks:
- ping:
I run this playbook with
$ cd /home/localuser/ansible_ec2
$ source .venv/bin/activate
$ ansible-playbook -i inventory/staging site.yml -vvv`
and this creates the EC2 instance - the 1st play works correctly. However, the 2nd play gives the following error
TASK [.....] ******************************************************************
The authenticity of host 'xx.xxx.xxx.xx (xx.xxx.xxx.xx)' can't be established.
ECDSA key fingerprint is XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.
Are you sure you want to continue connecting (yes/no)? yes
fatal: [xx.xxx.xxx.xx]: FAILED! => {"changed": false, "module_stderr":
"Shared connection to xx.xxx.xxx.xx closed.\r\n", "module_stdout": "/bin/sh:
1: /usr/bin/python: not found\r\n", "msg": "MODULE FAILURE", "rc": 127}
I followed the instructions from
this SO question to create the task with add_hosts
here to set gather_facts: False, but this still does not allow the play to run correctly.
How can I target the EC2 host using the tag name?
EDIT:
Additional info
This is the only playbook I have run to this point. I see this message requires Python but I cannot install Python on the instance as I cannot connect to it in my play Configure EC2 instance in launched group...if I could make that connection, then I could install Python (if this is the problem). Though, I'm not sure how to connect to the instance.
EDIT 2:
Here is my Python info on the localhost where I am running Ansible
I am running Ansible inside a Python venv.
Here is my python inside the venv
$ python --version
Python 2.7.15rc1
$ which python
~/ansible_ec2/.venv/bin/python
Here are my details about Ansible that I installed inside the Python venv
ansible 2.6.2
config file = /home/localuser/ansible_ec2/ansible.cfg
configured module search path = [u'/home/localuser/.ansible/plugins/modules', u'/usr/share/ansible/plugins/modules']
ansible python module location = /home/localuser/ansible_ec2/.venv/local/lib/python2.7/site-packages/ansible
executable location = /home/localuser/ansible_ec2/.venv/bin/ansible
python version = 2.7.15rc1 (default, xxxx, xxxx) [GCC 7.3.0]
Ok, so after a lot of searching, I found 1 possible workaround here. Basically, this workaround uses the lineinfile module and adds the new EC2 instance details to the hosts file permanently....not just for the in-memory plays following the add_host task. I followed this suggestion very closely and this approach worked for me. I did not need to use the add_host module.
EDIT:
The line I added in the lineinfile module was
- name: Add EC2 instance to inventory group
- lineinfile: line="{{ item.public_ip }} ansible_python_interpreter=/usr/bin/python3" insertafter=EOF dest=./inventory/staging/hosts
with_items: "{{ ec2.instances }}"
This is my yml script which I want to run to create an ec2 instance. But i'm getting error in the first line no matter what I put in there.
SYNTAX CHECKED AND IS FINE.
error:
"ERROR! A malformed block was encountered.
The error appears to have been in '/root/aws-create/ec2c.yml': line 2, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
-
name: Stage instance(s)
^ here"
-
name: Stage instance(s)
hosts: aws
connection: ssh
remote_user: ec2-user
become: yes
gather_facts: false
vars:
keypair: newrhel_2
instance_type: t2.micro
security_group: default
image: ami-b55a51cc
aws_region: us-west-2
aws_access_key: xxxxxxxxxxxxxxxxxxxxxxxx
aws_secret_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
tasks:
ec2:
aws_access_key={{aws_access_key}}
aws_secret_key={{aws_secret_key}}
keypair={{keypair}}
group={{security_group}}
instance_type={{instance_type}}
image={{image}}
region={{aws_region}}
wait=true
count=1
tasks should contain a list, not a dictionary (and because you use Ansible notation, ec2 is not valid as a YAML dictionary). You need to add a hyphen before ec2:
tasks:
- ec2:
I am attempting to install Apache on an EC2 instance through Ansible. My playbook looks like this:
# Configure and deploy Apache
- hosts: localhost
connection: local
remote_user: ec2-user
gather_facts: false
roles:
- ec2_apache
- apache
The 'ec2_apache' role provisions an EC2 instance and the first task within the apache/main.yml looks like this:
- name: confirm using the latest Apache server
become: yes
become_method: sudo
yum:
name: httpd
state: latest
However, I am getting the following error:
"module_stderr": "sudo: a password is required\n"
I did take a look at: How to switch a user per task or set of tasks? but it did not seem to resolve my problem.
Because the configuration of the Ec2 instance is in one role and the installation of Apache is in another, did I hork up the security in some way?
The issue you've got is that your playbook that runs both roles is targeting localhost so your Apache role is trying to run sudo yum install httpd locally rather than on the target EC2 instance.
As the ec2 module docs example shows you need to use the add_host module to add your new EC2 instance(s) to a group that you can then target with a further play.
So your playbook might look something like this:
# Configure and deploy Apache
- name: provision instance for Apache
hosts: localhost
connection: local
remote_user: ec2-user
gather_facts: false
roles:
- ec2_apache
- name: install Apache
hosts: launched
remote_user: ec2-user
roles:
- apache
And then, as per the example in the ec2 module docs, just do something like this in your ec2_apache role:
- name: Launch instance
ec2:
key_name: "{{ keypair }}"
group: "{{ security_group }}"
instance_type: "{{ instance_type }}"
image: "{{ image }}"
wait: true
region: "{{ region }}"
vpc_subnet_id: subnet-29e63245
assign_public_ip: yes
register: ec2
- name: Add new instance to host group
add_host: hostname={{ item.public_ip }} groupname=launched
with_items: ec2.instances
- name: Wait for SSH to come up
wait_for: host={{ item.public_dns_name }} port=22 delay=60 timeout=320 state=started
with_items: ec2.instances
As an aside you can see quickly that your ec2_apache role is actually pretty generic and you could turn this into a generic ec2_provision role that all sorts of other things could use, helping you re-use your code.
This is what I did to install apache.
Based on #ydaetskcoR suggestion, all I added was connection: local to fix the following problems.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive).", "unreachable": true}
See code below
---
- name: Install Apache and other packages
hosts: localhost
become: yes
connection: local
gather_facts: false
tasks:
- name: Install a list of packages with a list variable
yum:
name: "{{ packages }}"
state: latest
vars:
packages:
- httpd
- httpd-tools
- nginx
register: result
you also have to run your code as follows: -K stands for --ask-become-pass
ansible-playbook -i hosts.ini startapache.yml -K -vvv
Are you sure you are using ansible correctly and are you provindig a password for sudo on the remote host?
Just use --ask-become-pass when you execute the playbook. You should be prompted for the password.
I am using ec2.py dynamic inventory for provisioning with ansible.
I have placed the ec2.py in /etc/ansible/hosts file and marked it executable.
I also have the ec2.ini file in /etc/ansible/hosts.
[ec2]
regions = us-west-2
regions_exclude = us-gov-west-1,cn-north-1
destination_variable = public_dns_name
vpc_destination_variable = ip_address
route53 = False
all_instances = True
all_rds_instances = False
cache_path = ~/.ansible/tmp
cache_max_age = 0
nested_groups = False
group_by_instance_id = True
group_by_region = True
group_by_availability_zone = True
group_by_ami_id = True
group_by_instance_type = True
group_by_key_pair = True
group_by_vpc_id = True
group_by_security_group = True
group_by_tag_keys = True
group_by_tag_none = True
group_by_route53_names = True
group_by_rds_engine = True
group_by_rds_parameter_group = True
Above is my ec2.ini file
---
- hosts: localhost
connection: local
gather_facts: yes
vars_files:
- ../group_vars/dev_vpc
- ../group_vars/dev_sg
- ../hosts_vars/ec2_info
vars:
instance_type: t2.micro
tasks:
- name: Provisioning EC2 instance
local_action:
module: ec2
region: "{{ region }}"
key_name: "{{ key }}"
instance_type: "{{ instance_type }}"
image: "{{ ami_id }}"
wait: yes
group_id: ["{{ sg_npm }}", "{{sg_ssh}}"]
vpc_subnet_id: "{{ PublicSubnet }}"
source_dest_check: false
instance_tags: '{"Name": "EC2", "Environment": "Development"}'
register: ec2
- name: associate new EIP for the instance
local_action:
module: ec2_eip
region: "{{ region }}"
instance_id: "{{ item.id }}"
with_items: ec2.instances
- name: Waiting for NPM Server to come-up
local_action:
module: wait_for
host: "{{ ec2 }}"
state: started
delay: 5
timeout: 200
- include: ec2-configure.yml
Now the configuring script is as follows
- name: Configure EC2 server
hosts: tag_Name_EC2
user: ec2-user
sudo: True
gather_facts: True
tasks:
- name: Install nodejs related packages
yum: name={{ item }} enablerepo=epel state=present
with_items:
- nodejs
- npm
However when the configure script is called, the second script results into no hosts found.
If I execute the ec2-configure.yml just alone and if the EC2 server is up & running then it is able to find it and configure it.
I added the wait_for to make sure that the instance is in running state before the ec2-configure.yml is called.
Would appreciate if anyone can point my error. Thanks
After researching I came to know that the dynamic inventory doesnt refresh between playbook calls, it will only refresh if you are executing the playbook seprately.
However I was able to resolve the issue by using add_host command.
- name: Add Server to inventory
local_action: add_host hostname={{ item.public_ip }} groupname=webserver
with_items: webserver.instances
With ansible 2.0+, you refresh the dynamic inventory in the middle of the playbook as the task like this:
- meta: refresh_inventory
To extend this a bit, If you are getting problem with the cache in your playbook, then you can use it like this:
- name: Refresh the ec2.py cache
shell: "./inventory/ec2.py --refresh-cache"
changed_when: no
- name: Refresh inventory
meta: refresh_inventory
where ./inventory is the path to your dynamic inventory, please adjust it accordingly.
Hope this will help you.
Configure EC2 server play can't find any hosts from EC2 dynamic inventory because the new instance was added in the first play of the playbook - during the same execution. Group tag_Name_EC2 didn't exist in the inventory when the inventory was read and thus can't be found.
When you run the same playbook again Configure EC2 server should find the group.
We have used the following workaround to guide users in this kind of situations.
First, provision the instance:
tasks:
- name: Provisioning EC2 instance
local_action:
module: ec2
...
register: ec2
Then add a new play before ec2-configure.yml. The play uses ec2 variable that was registered in Provisioning EC2 instance and will fail and exit the playbook if any instances were launched:
- name: Stop and request a re-run if any instances were launched
hosts: localhost
gather_facts: no
tasks:
- name: Stop if instances were launched
fail: msg="Re-run the playbook to load group variables from EC2 dynamic inventory for the just launched instances!"
when: ec2.changed
- include: ec2-configure.yml
You can also refresh the cache:
ec2.py --refresh-cache
Or if your using as the Ansible host file:
/etc/ansible/hosts --refresh-cache