I first thought that this answer will totaly solve my issue, but it did not.
I have a string url like this one:
http://www.someurl.com/some-text-1-0-1-0-some-other-text.htm#id_76
I would like to extract some-other-text so basically, I come with the following regex:
/0-(.*)\.htm/
Unfortunately, this matches 1-0-some-other-text because regex are greedy. I can not succeed make it nongreedy using .*?, it just does not change anything as you can see here.
I also tried with the U modifier but it did not help.
Why the "nongreedy" tip does not work?
In case you need to get the closest match, you can make use of a tempered greedy token.
0-((?:(?!0-).)*)\.htm
See demo
The lazy version of your regex does not work because regex engine analyzes the string from left to right. It always gets leftmost position and checks if it can match. So, in your case, it found the first 0-and was happy with it. The laziness applies to the rightmost position. In your case, there is 1 possible rightmost position, so, lazy matching could not help achieve expected results.
You also can use
0-((?!.*?0-).*)\.htm
It will work if you have individual strings to extract the values from.
You want to exclude the 1-0? If so, you can use a non capturing group:
(?:1-0-)+(.*?)\.htm
Demo
Related
I've been looking around and could not make this happen. I am not totally noob.
I need to get text delimited by (including) START and END that doesn't contain START. Basically I can't find a way to negate a whole word without using advanced stuff.
Example string:
abcSTARTabcSTARTabcENDabc
The expected result:
STARTabcEND
Not good:
STARTabcSTARTabcEND
I can't use backward search stuff. I am testing my regex here: www.regextester.com
Thanks for any advice.
Try this
START(?!.*START).*?END
See it here online on Regexr
(?!.*START) is a negative lookahead. It ensures that the word "START" is not following
.*? is a non greedy match of all characters till the next "END". Its needed, because the negative lookahead is just looking ahead and not capturing anything (zero length assertion)
Update:
I thought a bit more, the solution above is matching till the first "END". If this is not wanted (because you are excluding START from the content) then use the greedy version
START(?!.*START).*END
this will match till the last "END".
START(?:(?!START).)*END
will work with any number of START...END pairs. To demonstrate in Python:
>>> import re
>>> a = "abcSTARTdefENDghiSTARTjlkENDopqSTARTrstSTARTuvwENDxyz"
>>> re.findall(r"START(?:(?!START).)*END", a)
['STARTdefEND', 'STARTjlkEND', 'STARTuvwEND']
If you only care for the content between START and END, use this:
(?<=START)(?:(?!START).)*(?=END)
See it here:
>>> re.findall(r"(?<=START)(?:(?!START).)*(?=END)", a)
['def', 'jlk', 'uvw']
The really pedestrian solution would be START(([^S]|S*S[^ST]|ST[^A]|STA[^R]|STAR[^T])*(S(T(AR?)?)?)?)END. Modern regex flavors have negative assertions which do this more elegantly, but I interpret your comment about "backwards search" to perhaps mean you cannot or don't want to use this feature.
Update: Just for completeness, note that the above is greedy with respect to the end delimiter. To only capture the shortest possible string, extend the negation to also cover the end delimiter -- START(([^ES]|E*E[^ENS]|EN[^DS]|S*S[^STE]|ST[^AE]|STA[^RE]|STAR[^TE])*(S(T(AR?)?)?|EN?)?)END. This risks to exceed the torture threshold in most cultures, though.
Bug fix: A previous version of this answer had a bug, in that SSTART could be part of the match (the second S would match [^T], etc). I fixed this but by the addition of S in [^ST] and adding S* before the non-optional S to allow for arbitrary repetitions of S otherwise.
May I suggest a possible improvement on the solution of Tim Pietzcker?
It seems to me that START(?:(?!START).)*?END is better in order to only catch a START immediately followed by an END without any START or END in between. I am using .NET and Tim's solution would match also something like START END END. At least in my personal case this is not wanted.
[EDIT: I have left this post for the information on capture groups but the main solution I gave was not correct.
(?:START)((?:[^S]|S[^T]|ST[^A]|STA[^R]|STAR[^T])*)(?:END)
as pointed out in the comments would not work; I was forgetting that the ignored characters could not be dropped and thus you would need something such as ...|STA(?![^R])| to still allow that character to be part of END, thus failing on something such as STARTSTAEND; so it's clearly a better choice; the following should show the proper way to use the capture groups...]
The answer given using the 'zero-width negative lookahead' operator "?!", with capture groups, is: (?:START)((?!.*START).*)(?:END) which captures the inner text using $1 for the replace. If you want to have the START and END tags captured you could do (START)((?!.*START).*)(END) which gives $1=START $2=text and $3=END or various other permutations by adding/removing ()s or ?:s.
That way if you are using it to do search and replace, you can do, something like BEGIN$1FINISH. So, if you started with:
abcSTARTdefSTARTghiENDjkl
you would get ghi as capture group 1, and replacing with BEGIN$1FINISH would give you the following:
abcSTARTdefBEGINghiFINISHjkl
which would allow you to change your START/END tokens only when paired properly.
Each (x) is a group, but I have put (?:x) for each of the ones except the middle which marks it as a non-capturing group; the only one I left without a ?: was the middle; however, you could also conceivably capture the BEGIN/END tokens as well if you wanted to move them around or what-have-you.
See the Java regex documentation for full details on Java regexes.
I want to find a string that is between two specific words. See in the picture the pattern I made. The problem is that "INICIO" is appearing twice, I just want it to match it last appearance until the word "FIM". In this case, I wanted the first pattern to be INICIOBBBBBBBBBBBFIM. I need match all occurrence in the string.
Link to Regex
My Regex
What you are looking for sounds like what Rexegg terms a tempered greedy token.
INICIO(?:(?!INICIO).)*?FIM
See your updated demo at regex101
The negative lookahead "tempers" the dot to not jump over another start. This practice is rather costly as before each position the lookahead looks ahead if there is no INICIO ahead before proceeding.
If interested, there is a nice answer on SO explaining it in more detail.
Maybe,
.*(INICIO.*?FIM)
or
INICIO(?!.*\BINICIO\B)\B.*?\BFIM
might be OK to start with.
If you wish to simplify/modify/explore the expression, it's been explained on the top right panel of regex101.com. If you'd like, you can also watch in this link, how it would match against some sample inputs.
Demo 2
Reverse the string, and search for
MIF.*?OICINI
Then reverse the match
"JJJJJJJJJJJJJJJINICIOAAAAAAAAAAAAINICIOBBBBBBBBBBBBFIMJJJJJJJJJJJJJJINICIOJJJJJJJJJJJJJJFIM"
.split("")
.reverse()
.join("")
.match(/MIF.*?OICINI/g)[1]
.split("")
.reverse()
.join("");
(Notice, I'm actually grabbing the second match here. This is because the matches are in reverse order as well)
A bit contrived but this could work:
(?<=INICIO).*?(INICIO.*?FIM)|(?<=FIM).*?(INICIO.*?FIM)
Your result will be in $2
https://regex101.com/r/qUf4kE/1
I am new to using regex. I am trying to use the regex find and replace option in Notepad++.
I have used the following regex:
((?:)|(\+)|(-))(\d)((?:)|(\+)|(-))(/)((?:)|(\+)|(-))(\d)((?:)|(\+)|(-))
For the following text:
2/2
+2/+2
-2/-2
2+/2+
2-/2-
But I am able to get matches only for the first three. The last two, it only gives partial matches, excluding the last "+" and the "-". I am wondering if there is any upper limit for the number of groups (which i doubt is unlikely) that can be used or any upper limit for the maximum length of the regex. I am not sure why my regex is failing. Or if there is anything wrong with my regex, please correct it.
This is not an issue with Notepad++'s regex engine. The problem is that when you have alternations like (?:)|(\+)|(-), the regex engine will attempt to match the different options in the order they are specified. Since you specified an empty group first, it will attempt to match an empty string first, only matching the + or - if it needs to backtrack. This essentially makes the alternation lazy—it will never match any character unless it has to.
vks's answer works perfectly well, but just in case you actually needed those capturing groups separated out, you can do the same thing just by rewriting your alternations like this:
((\+)|(-)|(?:))(\d)((\+)|(-)|(?:))(/)((\+)|(-)|(?:))(\d)((\+)|(-)|(?:))
or even more simply, like this:
((\+)|(-)|)(\d)((\+)|(-)|)(/)((\+)|(-)|)(\d)((\+)|(-)|)
([-+]?)(\d)([-+]?)(/)([-+]?)(\d)([-+]?)
You can use this simple regex to match all cases.See here.
https://www.regex101.com/r/fG5pZ8/19
I've been looking around and could not make this happen. I am not totally noob.
I need to get text delimited by (including) START and END that doesn't contain START. Basically I can't find a way to negate a whole word without using advanced stuff.
Example string:
abcSTARTabcSTARTabcENDabc
The expected result:
STARTabcEND
Not good:
STARTabcSTARTabcEND
I can't use backward search stuff. I am testing my regex here: www.regextester.com
Thanks for any advice.
Try this
START(?!.*START).*?END
See it here online on Regexr
(?!.*START) is a negative lookahead. It ensures that the word "START" is not following
.*? is a non greedy match of all characters till the next "END". Its needed, because the negative lookahead is just looking ahead and not capturing anything (zero length assertion)
Update:
I thought a bit more, the solution above is matching till the first "END". If this is not wanted (because you are excluding START from the content) then use the greedy version
START(?!.*START).*END
this will match till the last "END".
START(?:(?!START).)*END
will work with any number of START...END pairs. To demonstrate in Python:
>>> import re
>>> a = "abcSTARTdefENDghiSTARTjlkENDopqSTARTrstSTARTuvwENDxyz"
>>> re.findall(r"START(?:(?!START).)*END", a)
['STARTdefEND', 'STARTjlkEND', 'STARTuvwEND']
If you only care for the content between START and END, use this:
(?<=START)(?:(?!START).)*(?=END)
See it here:
>>> re.findall(r"(?<=START)(?:(?!START).)*(?=END)", a)
['def', 'jlk', 'uvw']
The really pedestrian solution would be START(([^S]|S*S[^ST]|ST[^A]|STA[^R]|STAR[^T])*(S(T(AR?)?)?)?)END. Modern regex flavors have negative assertions which do this more elegantly, but I interpret your comment about "backwards search" to perhaps mean you cannot or don't want to use this feature.
Update: Just for completeness, note that the above is greedy with respect to the end delimiter. To only capture the shortest possible string, extend the negation to also cover the end delimiter -- START(([^ES]|E*E[^ENS]|EN[^DS]|S*S[^STE]|ST[^AE]|STA[^RE]|STAR[^TE])*(S(T(AR?)?)?|EN?)?)END. This risks to exceed the torture threshold in most cultures, though.
Bug fix: A previous version of this answer had a bug, in that SSTART could be part of the match (the second S would match [^T], etc). I fixed this but by the addition of S in [^ST] and adding S* before the non-optional S to allow for arbitrary repetitions of S otherwise.
May I suggest a possible improvement on the solution of Tim Pietzcker?
It seems to me that START(?:(?!START).)*?END is better in order to only catch a START immediately followed by an END without any START or END in between. I am using .NET and Tim's solution would match also something like START END END. At least in my personal case this is not wanted.
[EDIT: I have left this post for the information on capture groups but the main solution I gave was not correct.
(?:START)((?:[^S]|S[^T]|ST[^A]|STA[^R]|STAR[^T])*)(?:END)
as pointed out in the comments would not work; I was forgetting that the ignored characters could not be dropped and thus you would need something such as ...|STA(?![^R])| to still allow that character to be part of END, thus failing on something such as STARTSTAEND; so it's clearly a better choice; the following should show the proper way to use the capture groups...]
The answer given using the 'zero-width negative lookahead' operator "?!", with capture groups, is: (?:START)((?!.*START).*)(?:END) which captures the inner text using $1 for the replace. If you want to have the START and END tags captured you could do (START)((?!.*START).*)(END) which gives $1=START $2=text and $3=END or various other permutations by adding/removing ()s or ?:s.
That way if you are using it to do search and replace, you can do, something like BEGIN$1FINISH. So, if you started with:
abcSTARTdefSTARTghiENDjkl
you would get ghi as capture group 1, and replacing with BEGIN$1FINISH would give you the following:
abcSTARTdefBEGINghiFINISHjkl
which would allow you to change your START/END tokens only when paired properly.
Each (x) is a group, but I have put (?:x) for each of the ones except the middle which marks it as a non-capturing group; the only one I left without a ?: was the middle; however, you could also conceivably capture the BEGIN/END tokens as well if you wanted to move them around or what-have-you.
See the Java regex documentation for full details on Java regexes.
Well, here I am back at regex and my poor understanding of it. Spent more time learning it and this is what I came up with:
/(.*)
I basically want the number in this string:
510973
My regex is almost good? my original was:
"/<a href=\"travis.php?theTaco(.*)\">(.*)<\/a>/";
But sometimes it returned me huge strings. So, I just want to get numbers only.
I searched through other posts but there is such a large amount of unrelated material, please give an example, resource, or a link directing to a very related question.
Thank you.
Try using a HTML parser provided by the language you are using.
Reason why your first regex fails:
[0-9999999] is not what you think. It is same as [0-9] which matches one digit. To match a number you need [0-9]+. Also .* is greedy and will try to match as much as it can. You can use .*? to make it non-greedy. Since you are trying to match a number again, use [0-9]+ again instead of .*. Also if the two number you are capturing will be the same, you can just match the first and use a back reference \1 for 2nd one.
And there are a few regex meta-characters which you need to escape like ., ?.
Try:
<a href=\"travis\.php\?theTaco=([0-9]+)\">\1<\/a>
To capture a number, you don't use a range like [0-99999], you capture by digit. Something like [0-9]+ is more like what you want for that section. Also, escaping is important like codaddict said.
Others have already mentioned some issues regarding your regex, so I won't bother repeating them.
There are also issues regarding how you specified what it is you want. You can simply match via
/theTaco=(\d+)/
and take the first capturing group. You have not given us enough information to know whether this suits your needs.