Does anyone could provide me the command line for install valgrind and gdb on manjaro(archlinux) ?
Kind Regards
You can install both packages at once with:
sudo pacman -S gdb valgrind
Related
I'm having xcode issues when I try to use brew and git:
xcrun: error: active developer path ("/Applications/Xcode.app/Contents/Developer") does not exist, use xcode-select --switch path/to/Xcode.app to specify the Xcode that you wish to use for command line developer tools (or see man xcode-select)
I can type xcode-select and it shows that the command exists. When I type xcode-select -p it shows:
/Applications/Xcode.app/Contents/Developer
but when I do which xcode-select, it gives me:
/usr/bin/xcode-select
I've tried to use the command switch and install again via Apple Developer site but none of these options have work so far... How can I fix this?
I tried that and it didn't work but I found the answer. I just had to reset the developer's path:
$ sudo xcode-select --reset
Now everything is normal
Mostly this error occurs when you have installed a newer version of xcode. And the command line tools are yet to be initialized.
To resolve this:
Go under Xcode Preferences > Locations (tab) > And the bottom options is Command Line Tools. Please select the Xcode version for tools.
Example (For Xcode 10.0 (10A255) ):
Go under Xcode Preferences > Locations (tab) > And the bottom options is Command Line Tools. Select Xcode 10.0 (10A255).
For more details please see this image:
In my case, I had uninstalled Xcode and then issues with git cli started. I solved the problem running the following commands:
$ sudo xcode-select -r
$ sudo xcode-select --switch /Library/Developer/CommandLineTools
and then validating new path with:
$ sudo xcode-select -p
I have faced the same issue as I have uninstalled the XCode abruptly, running the below command (from Terminal) helped me to resolve this.
sudo xcode-select -switch /
This error coming because xcode get deleted, corrupt or moved.
In my case i removed xcode from my Mac and faced the same issue.
I fixed it by simple two steps
Open Terminal
Simply run following command
sudo xcode-select -r
And now error has resolved. Hope it will helpful.
Use this:
sudo xcode-select -switch /
This should solve the problem.
How about what the error suggests? Did you try that?
xcode-select --switch /Applications/Xcode.app
That should do the trick.
For me it helps to install Xcode CLI
xcode-select --install
after uninstalling XCode (I don't develop for the OSx or iOS)
Then I could successfully build downloaded source with make
Try error suggestion :
sudo xcode-select --switch /Applications/Xcode.app
And Then test Git Executable Path.
I had the same problem and had to remove completely Developer tools, and reinstall:
$ rm -rf /Library/Developer/CommandLineTools
$ xcode-select --install
Tip: because Xcode had been improperly uninstalled, I had to manually (re)move the Xcode app, too:
$ mv /Applications/Xcode.app/ /Applications/Xcode.app.bak
In my case such error occurred after I has tried to symbolicate crash report, and according to a manual, entered command export DEVELOPER_DIR=”/Applications/Xcode.app/Contents/Developer”
I tried some proposed here solutions but nothing helped.
Then I realized that I have added an environment variable DEVELOPER_DIR to my terminal and this led to error: "xcrun: error: missing DEVELOPER_DIR path:"
Then I've just reboot my terminal, that cleaned the environment variable and the error disappeared.
(FYI: environment variables may be checked with printenv command in terminal)
for my mbp m1 apple sillicon for the case alr tried all the above answer and not solved.
i have solved by here discussion https://developer.apple.com/forums/thread/660641
there is have 2 option to solve, my case...
i have uninstalled xcode because i don't need again
install standalone mode, doesnt work. can't install the software
solved by try download manual command line tools check on the discussion thread for the link file ( 741.5 MB ) .
I try to debug a trivial helloworld cpp project with qtcreator.
When I start debugging the project, I obtain an error saying:
The selected build of GDB does not support Python scripting.
It cannot be used in Qt Creator.
My system is debian9
My QT version is 5.14.2Here is my .pro file:
QT += widgets
TEMPLATE = app
SOURCES = main.cpp
Can anyone show me how I should configure GDB with QT to avoid this error?
As #Mark Plotnik (Thank you Mark) suggested, you have a gdb-minimal installed.
Running dpkg --get-selections | grep gdb, you should have an ouput like the following:
gdb-minimal install
gdbm-l10n install
libgdbm-compat4:amd64 install
libgdbm6:amd64 install
wireless-regdb install
Only gdb-minimal, there is no gdb.
Here is what I did to solve this problem on my debian 9 system:
sudo apt install gdb
to get the full gdb.
If you rerun the command after the installation dpkg --get-selections | grep gdb, you should have :
gdb install
gdb-minimal deinstall
gdbm-l10n install
libgdbm-compat4:amd64 install
libgdbm6:amd64 install
wireless-regdb install
You should have gdb installed and gdb-minimal uninstalled.
After this, I retested debugging on qtCreator and it works now.
I have found a page which has steps to instal cppcheck on Mac OSX, but it is not clear what are we doing with 2nd step
Press Command+Space and type Terminal and press enter/return key.
Run in Terminal app:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" < /dev/null 2> /dev/null
and press enter/return key. Wait for the command to finish.
brew install cppcheck
Homebrew helps you install packages (software).
You need to install it in order to use it; that is what step 2 is doing, installing Homebrew.
Then, you can use homebrew commands to install available packages, like the one you have in step 3 (cppcheck).
Whenever I try to debug any program (i.e. a welcome message), I get this prompt. Any ideas how to run the debugger for C++ program?
I am using Macbook Pro OS X El Capitan (10.11.3)
For Mac OSX 10.5 and above,
Install Homebrew (if you don't have it already)
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Install GDB
brew install gdb
Go to https://sourceware.org/gdb/wiki/BuildingOnDarwin and follow the instructions to code sign the gdb binary.
If you're on Sierra, run the following command in your terminal
echo "set startup-with-shell off" >> ~/.gdbinit
Finally, run the following comamnd in your terminal
which gdb
Copy the output path from that command, (mine was /usr/local/bin/gdb) into the Debugger Command box in Netbeans and start debugging!
On Linux systems derived from debian, you have to install gdb
sudo apt-get install gdb
Then in debbuger command type
/usr/bin/gdb
More information of gdb can be found in GDB: The GNU Project Debugger
Make sure gdb is installed in your machine. you can do this by following
C:\cygwin64>setup-x86_64.exe -q -P gdb
after this, select gdb as a debugger in netbeans
gdb location
Use Synaptic to install gdb. This debugger is required for Netbeans.
On a Mac, I installed HomeBrew first, then followed this exactly on the Sierra OS. Worked perfectly. After Homebrew is installed, you have to create then sign your gdb certificate. Then select it in your IDE debugger section.
The instructions show how to select gdb in Eclipse, but I got it working in NetBeans by pushing the debugger button and typing in the file path in the popup (as mentioned in this document).
https://www.ics.uci.edu/~pattis/common/handouts/macmingweclipse/allexperimental/mac-gdb-install.html
How to download and install GDB(GNU Debugger) on Fedora Linux Machine.. I have tried downloading from gnu website 7.1 package, but then it fails during
./configure and then make command...
Please share the source from where i can get information on the same.
Thanks..
I have found this tutorial which might be helpful to install gdb.
http://www.tutorialspoint.com/gnu_debugger/installing_gdb.htm
But for me the command:
yum install gdb
works.
You may need to install some development packages with header files needed to build gdb. The exact package list depends on error messages from ./configure and make. Here is installed package list on my system:
# rpm -qa "*devel"
kernel-devel-2.6.23.1-42.fc8
ncurses-devel-5.6-12.20070812.fc8
python-devel-2.5.1-15.fc8
expat-devel-2.0.1-2
libtirpc-devel-0.1.7-12.fc8
glibc-devel-2.7-2
libstdc++-devel-4.1.2-33
Try to install all of them with yum.