Issue on TextFragment.Margin with justify - aspose

I have an requirement to apply the indent and justify the paragraph text, so I have applied the margin for the TextFragment and applied the justify property. But the right side text was went to out of the page and showed like a trimmed some text on right side.
If I used table cell and apply the margin for cell and justify the cell text it is working but page size was increased and performance was decreased so we are not recommended for table approach.
Below is my code snippet.
Document pdfDoc = new Document();
pdfDoc.PageInfo.Width = 612.0;
pdfDoc.PageInfo.Height = 792.0;
pdfDoc.PageInfo.Margin = new MarginInfo();
pdfDoc.PageInfo.Margin.Left = 72;
pdfDoc.PageInfo.Margin.Right = 72;
pdfDoc.PageInfo.Margin.Top = 72;
pdfDoc.PageInfo.Margin.Bottom = 72;
Page pdfPage = pdfDoc.Pages.Add();
pdfPage.PageInfo.Width = 612.0;
pdfPage.PageInfo.Height = 792.0;
pdfPage.PageInfo.Margin = new MarginInfo();
pdfPage.PageInfo.Margin.Left = 72;
pdfPage.PageInfo.Margin.Right = 72;
pdfPage.PageInfo.Margin.Top = 72;
pdfPage.PageInfo.Margin.Bottom = 72;
TextFragment textfragment = new TextFragment("This line for verify the indent");
textfragment.TextState.FontSize = 12;
textfragment.TextState.Font = Aspose.Pdf.Text.FontRepository.FindFont("Arial");
textfragment.TextState.LineSpacing = 15;
pdfPage.Paragraphs.Add(textfragment);
textfragment = new TextFragment("TextFragment with Justify : This AGREEMENT AND PLAN OF MERGER (this \"Agreement\") is made and entered into as of ______ __, ____, by and among ___________________, a Delaware corporation (\"Parent\"),___________________, a Delaware corporation and a wholly owned subsidiary of Parent (\"MergerSub\"), and ___________________, a Delaware corporation (the \"Company\").");
textfragment.TextState.HorizontalAlignment = HorizontalAlignment.Justify;
textfragment.TextState.FontSize = 12;
textfragment.TextState.Font = Aspose.Pdf.Text.FontRepository.FindFont("Arial");
textfragment.TextState.LineSpacing = 15;
//for ss_indent I have given 10f left indent into text fragment.
textfragment.Margin = new MarginInfo(10f, 0f, 0f, 0f);
pdfPage.Paragraphs.Add(textfragment);
textfragment = new TextFragment("TextFragment without Justify : This AGREEMENT AND PLAN OF MERGER (this \"Agreement\") is made and entered into as of ______ __, ____, by and among ___________________, a Delaware corporation (\"Parent\"),___________________, a Delaware corporation and a wholly owned subsidiary of Parent (\"MergerSub\"), and ___________________, a Delaware corporation (the \"Company\").");
textfragment.TextState.FontSize = 12;
textfragment.TextState.Font = Aspose.Pdf.Text.FontRepository.FindFont("Arial");
textfragment.TextState.LineSpacing = 15;
//for ss_indent I have given 10f left indent into text fragment.
textfragment.Margin = new MarginInfo(10f, 0f, 0f, 0f);
pdfPage.Paragraphs.Add(textfragment);
Please suggest me if it have any other way to do this requirement.

Related

How can I apply conditional formatting in C++ MFC?

https://learn.microsoft.com/en-us/previous-versions/office/developer/office-2007/bb404903(v=office.12)?redirectedfrom=MSDN
Microsoft provides example codes in C# and Visual Basic.
For example C# code as follows.
ApplicationClass excelApplication = null;
Workbook newWorkbook = null;
Worksheet targetSheet = null;
ColorScale cfColorScale = null;
IconSetCondition cfIconSet = null;
string paramWorkbookPath = #"C:\Temp\Test.xlsx";
object paramMissing = Type.Missing;
excelApplication = new ApplicationClass();
newWorkbook = excelApplication.Workbooks.Add(XlWBATemplate.xlWBATWorksheet);
targetSheet = (Worksheet)(newWorkbook.Worksheets[1]);
targetSheet.Name = "Conditional Formatting";
// Fill cells A1:A10 with sample data.
targetSheet.get_Range("A1", paramMissing).set_Value(XlRangeValueDataType.xlRangeValueDefault, 1);
targetSheet.get_Range("A2", paramMissing).set_Value(XlRangeValueDataType.xlRangeValueDefault, 2);
targetSheet.get_Range("A1:A2",
paramMissing).AutoFill(targetSheet.get_Range("A1:A10", paramMissing), XlAutoFillType.xlFillSeries);
// Create a two-color ColorScale object for the created sample data
// range.
cfColorScale = (ColorScale)(targetSheet.get_Range("A1:A10",
Type.Missing).FormatConditions.AddColorScale(2));
// Set the minimum threshold to red (0x000000FF) and maximum threshold
// to blue (0x00FF0000).
cfColorScale.ColorScaleCriteria[1].FormatColor.Color = 0x000000FF;
cfColorScale.ColorScaleCriteria[2].FormatColor.Color = 0x00FF0000;
How can we apply conditional formatting in C++ MFC?
range = ws.get_Range(COleVariant(_T("A1"), COleVariant(_T("A10")));
CFormatCondition fc;
fc = range.get_FormatConditions();

Retraining a SsaForecast Model in ML.net

I hope you are doing well. I have trained my forecasting model via ML.net in VS 2022. The model is working very well for predicting the amount of income per day and number of patients. My problem is that I cannot train the model. To be Honest! I cannot extract the suitable parameters for ForecastSsa algorithm.
Here is the code:
string[] PersianDates = new string[5];
int[] PatientCounts = new int[5];
ModelOutput ML_Out = PatientPrediction_Consumption.Predict(null, horizon: 31);
float[] Number_TotalPrices = new float[5];
DateTime DateTimeNow = DateTime.Now;
for (int IndexDay = 0; IndexDay <= 4; IndexDay++)
{
DateTimeNow = DateTimeNow.AddDays(1);
PersianCalendar CDP = new PersianCalendar();
Number_TotalPrices[IndexDay] = ML_Out.TotalPrice_UB[CDP.GetDayOfMonth(DateTimeNow)]
- ML_Out.TotalPrice[CDP.GetDayOfMonth(DateTimeNow)];
PersianDates[IndexDay] = FarsiCalendar(DateTimeNow, false);
PatientCounts[IndexDay] = (int)Number_TotalPrices[IndexDay] / 120000;
PatientPrediction_Predicted =
PatientPrediction_Predicted + "\n" + "تاریخ:" + PersianDates[IndexDay] +
"- در آمد:" + Number_TotalPrices[IndexDay] +
" - تعداد مراجعین:" + PatientCounts[IndexDay] + "<br/f>";
}

How to show all tooltip Text where line series circle bullets intersect Amcharts 4?

I am using a Amcharts4 Line series with valueX and valueY instead of categoryX.
Currently I am able to see the tooltip on a hover of bullet/bubble but I also want to see the tooltip of all bullets if they are intersecting and overlapping with each other.
It shows the tooltip if i hover on a single bullet/bubble but if you see the red and green line intersecting each other, it shows the tooltip of green bullet/bubble only, not the other which is hidden at its back.
Click here to see Line Series graph with ValueX and ValueY
This is my code where I am having 3 series and setup a tooltip for each bullet :
let series1 = chart.series.push(new am4charts.LineSeries());
series1.cursorTooltipEnabled = true;
series1.showTooltipOn = 'hover';
series1.dataFields.valueY = "compressorCap";
// series1.dataFields.categoryX = "evapDegC"; // If X-Axis is Category Axis
series1.dataFields.valueX = "evapDegC"; // If X-Axis is Value Axis
series1.name = "Compressor capacity";
let series1toolTip = series1.bullets.push(new am4charts.CircleBullet());
series1toolTip.tooltipText = "{name} in {valueX}°C => {valueY}";
series1.tooltip.getFillFromObject = false;
series1.tooltip.background.fill = am4core.color("#b9a9e6");
series1.legendSettings.valueText = "{valueY}";
series1.visible = false;
series1.stroke = am4core.color("#b9a9e6");
let series2 = chart.series.push(new am4charts.LineSeries());
series2.cursorTooltipEnabled = true;
series2.showTooltipOn = 'hover';
series2.dataFields.valueY = "evapCoilCap";
// series2.dataFields.categoryX = "evapDegC"; // If X-Axis is Category Axis
series2.dataFields.valueX = "evapDegC"; // If X-Axis is Value Axis
series2.name = 'Evaporator coil capacity';
let series2toolTip = series2.bullets.push(new am4charts.CircleBullet());
series2toolTip.tooltipText = "{name} in {valueX}°C => {valueY}";
series2.tooltip.getFillFromObject = false;
series2.tooltip.background.fill = am4core.color("red");
series2.legendSettings.valueText = "{valueY}";
series2.stroke = am4core.color("red");
let series3 = chart.series.push(new am4charts.LineSeries());
series3.cursorTooltipEnabled = true;
series3.showTooltipOn = 'hover';
series3.dataFields.valueY = "evapCoilSensibleCap";
// series3.dataFields.categoryX = "evapDegC"; // If X-Axis is Category Axis
series3.dataFields.valueX = "evapDegC"; // If X-Axis is Value Axis
series3.name = 'Evaporator sensible cooling capacity ';
let series3toolTip = series3.bullets.push(new am4charts.CircleBullet());
series3toolTip.tooltipText = "{name} in {valueX}°C => {valueY}";
series3.tooltip.getFillFromObject = false;
series3.tooltip.background.fill = am4core.color("#13bb37");
series3.legendSettings.valueText = "{valueY}";
series3.stroke = am4core.color("#13bb37");
// Add chart cursor
chart.cursor = new am4charts.XYCursor();
chart.cursor.behavior = "zoomY";
In order to display multiple tooltips, you need to set tooltipText directly on series, not on a bullet.
series.tooltipText = "{name} in {valueX}°C => {valueY}";
That's the first step, though. Since you are using all-ValueAxis scenario, you will also need to apply a workaround as stated in this tutorial.
am4charts.ValueAxis.prototype.getSeriesDataItem = function(series, position) {
var key = this.axisFieldName + this.axisLetter;
var value = this.positionToValue(position);
var dataItem = series.dataItems.getIndex(series.dataItems.findClosestIndex(value, function(x) {
return x[key] ? x[key] : undefined;
}, "any"));
return dataItem;
}
This will enable multi-cursors across all charts.
Or if you want to enable for just for a single axis:
valueAxisX.getSeriesDataItem = function(series, position) {
var key = this.axisFieldName + this.axisLetter;
var value = this.positionToValue(position);
var dataItem = series.dataItems.getIndex(series.dataItems.findClosestIndex(value, function(x) {
return x[key] ? x[key] : undefined;
}, "any"));
return dataItem;
}
If you don't want to show all tooltips for all the series all the time, you can set cursor's maxTooltipDistance to a small number so that multiple tooltips are shown only if target items are closely packged together, e.g.:
chart.cursor.maxTooltipDistance = 10;

How to Add Image/Shape with chart data label in ASPOSE Slide

Can we add any shape/image with chart data labels in ASPOSE .I need to show one arrow with different colors according to certain values with each data labels in the chart. i am using ASPOSE to generate my ppt. Or there is any way to find the data label positions in ASPOSE.
I have observed your requirements and like to share that MS PowerPoint supports LineWithMarker chart that can display different predefined or custom marker symbols(in the form of image) for different series data points. Please try using following sample code for possible options using Aspose.Slides and MSO charts.
public static void TestScatter()
{
var location = System.Reflection.Assembly.GetExecutingAssembly().Location;
//Open a presentation
Presentation pres = new Presentation();
IChart chart = pres.Slides[0].Shapes.AddChart(ChartType.StackedLineWithMarkers, 10, 10, 400, 400);
//populating cycle
var serie = chart.ChartData.Series[0];
var wbk = chart.ChartData.ChartDataWorkbook;
chart.ChartData.Series.RemoveAt(1);
chart.ChartData.Series.RemoveAt(1);
serie.Marker.Format.Fill.FillType = FillType.Picture;
serie.Marker.Size = 20;
// Set the picture
System.Drawing.Image img = (System.Drawing.Image)new Bitmap(#"C:\Users\Public\Pictures\Sample Pictures\Tulips.jpg");
IPPImage imgx = pres.Images.AddImage(img);
serie.Marker.Format.Fill.PictureFillFormat.Picture.Image = imgx;
//For individual data point
serie.DataPoints[0].Marker.Format.Fill.FillType = FillType.Solid;
serie.DataPoints[0].Marker.Format.Fill.SolidFillColor.Color = Color.Red;
serie.DataPoints[0].Marker.Size = 20;
serie.DataPoints[0].Marker.Symbol = MarkerStyleType.Triangle;
serie.DataPoints[0].Label.DataLabelFormat.ShowValue = true;
serie.DataPoints[1].Label.DataLabelFormat.ShowValue = true;
serie.DataPoints[2].Label.DataLabelFormat.ShowValue = true;
serie.DataPoints[3].Label.DataLabelFormat.ShowValue = true;
pres.Save(Path.Combine(Path.GetDirectoryName(location), "Result2.pptx"), SaveFormat.Pptx);
}
I am working as Support developer/ Evangelist at Aspose.
Many Thanks,
I have further observed your requirements and have observed that you have also posted the similar requirements in Aspose.Slides official support forum as well. Please try using following sample code on your end to serve the purpose.
public static void TestLineChart()
{
var location = System.Reflection.Assembly.GetExecutingAssembly().Location;
//Open a presentation
Presentation pres = new Presentation();
IChart chart = pres.Slides[0].Shapes.AddChart(ChartType.StackedLineWithMarkers, 10, 10, 400, 400);
//populating cycle
var serie = chart.ChartData.Series[0];
var wbk = chart.ChartData.ChartDataWorkbook;
chart.ChartData.Series.RemoveAt(1);
chart.ChartData.Series.RemoveAt(1);
serie.Marker.Format.Fill.FillType = FillType.Picture;
serie.Marker.Size = 20;
serie.Marker.Symbol = MarkerStyleType.Diamond;
serie.Marker.Format.Fill.FillType = FillType.Solid;
serie.Marker.Format.Fill.SolidFillColor.Color=Color.Orange;
serie.Marker.Format.Line.FillFormat.FillType = FillType.Solid;
serie.Marker.Format.Line.FillFormat.SolidFillColor.Color=Color.Red;
serie.Marker.Format.Line.Width=1.0F;
serie.Format.Line.Width = 3.0f;
serie.Format.Line.FillFormat.FillType=FillType.Solid;
serie.Format.Line.FillFormat.SolidFillColor.Color = Color.FromArgb(209,225,91) ;
for(int i=0;i<serie.DataPoints.Count;i++)
{
serie.DataPoints[i].Label.DataLabelFormat.ShowValue = true;
IDataLabel label=serie.Labels[i];
chart.ValidateChartLayout();
IAutoShape ashp=chart.UserShapes.Shapes.AddAutoShape(ShapeType.Triangle,chart.X + label.ActualX + 5, chart.Y + label.ActualY + 5, 20,20);
ashp.FillFormat.FillType = FillType.Solid;
ashp.LineFormat.FillFormat.FillType = FillType.NoFill;
if (i % 2 == 0)//even data points
{
ashp.FillFormat.SolidFillColor.Color = Color.Green;
}
else
{
ashp.Rotation = 180;
ashp.FillFormat.SolidFillColor.Color = Color.Red;
}
}
pres.Save(Path.Combine(Path.GetDirectoryName(location), "Result2.pptx"), Aspose.Slides.Export.SaveFormat.Pptx);
}
I am working as Support developer/ Evangelist at Aspose.
Many Thanks,

changing sprite frame depending on random value

I have a list of buttons(currently images) and i want to change the image color depending on the value that is taken from the list
buttons = {"btn1","btn2","btn3","btn4"}
local buttonSheetData = {
width = 150,
height = 150,
numFrames = 2,
sheetContentWidth = 300,
sheetcontentheight = 150,
}
local buttonSheet = graphics.newImageSheet("image/buttonSS.png", buttonSheetData)
local sequenceData = {
{name = "black", start = 1, count = 1},
{name = "red", start = 2, count = 1}
}
local btn1 = display.newSprite(buttonSheet, sequenceData)
btn1.x = 100
btn1.y = 90
local btn2 = display.newSprite(buttonSheet, sequenceData)
btn2.x = 200
btn2.y = 230
local btn3 = display.newSprite(buttonSheet, sequenceData)
btn3.x = 300
btn3.y = 90
local btn4 = display.newSprite(buttonSheet, sequenceData)
btn4.x = 400
btn4.y = 230
x = buttons[math.random(#buttons)]
x:setFrame(2)
The circles are currently black. every time i run the code i want it to take a random value from the list and change the color to red. so there is a different red circle when i run the code
I keep getting the error:
"Attemp to call method 'setSequence' (a nill value)"
You're code is treating strings and variable names as if they are interchangeable. The first line:
buttons = {"btn1","btn2","btn3","btn4"}
creates a table of strings, so the line:
x = buttons[math.random(#buttons)]
will set x to be a random entry of buttons which are strings so the next line (x:setFrame(2)) is calling a method that doesn't exist on a string.
Instead, create a table of your buttons:
buttons = {btn1,btn2,btn3,btn4} -- creates a table of buttons
x = buttons[math.random(#buttons)] -- x is a random entry of buttons (a button)