Related
My regex pattern looks something like
<xxxx location="file path/level1/level2" xxxx some="xxx">
I am only interested in the part in quotes assigned to location. Shouldn't it be as easy as below without the greedy switch?
/.*location="(.*)".*/
Does not seem to work.
You need to make your regular expression lazy/non-greedy, because by default, "(.*)" will match all of "file path/level1/level2" xxx some="xxx".
Instead you can make your dot-star non-greedy, which will make it match as few characters as possible:
/location="(.*?)"/
Adding a ? on a quantifier (?, * or +) makes it non-greedy.
Note: this is only available in regex engines which implement the Perl 5 extensions (Java, Ruby, Python, etc) but not in "traditional" regex engines (including Awk, sed, grep without -P, etc.).
location="(.*)" will match from the " after location= until the " after some="xxx unless you make it non-greedy.
So you either need .*? (i.e. make it non-greedy by adding ?) or better replace .* with [^"]*.
[^"] Matches any character except for a " <quotation-mark>
More generic: [^abc] - Matches any character except for an a, b or c
How about
.*location="([^"]*)".*
This avoids the unlimited search with .* and will match exactly to the first quote.
Use non-greedy matching, if your engine supports it. Add the ? inside the capture.
/location="(.*?)"/
Use of Lazy quantifiers ? with no global flag is the answer.
Eg,
If you had global flag /g then, it would have matched all the lowest length matches as below.
Here's another way.
Here's the one you want. This is lazy [\s\S]*?
The first item:
[\s\S]*?(?:location="[^"]*")[\s\S]* Replace with: $1
Explaination: https://regex101.com/r/ZcqcUm/2
For completeness, this gets the last one. This is greedy [\s\S]*
The last item:[\s\S]*(?:location="([^"]*)")[\s\S]*
Replace with: $1
Explaination: https://regex101.com/r/LXSPDp/3
There's only 1 difference between these two regular expressions and that is the ?
The other answers here fail to spell out a full solution for regex versions which don't support non-greedy matching. The greedy quantifiers (.*?, .+? etc) are a Perl 5 extension which isn't supported in traditional regular expressions.
If your stopping condition is a single character, the solution is easy; instead of
a(.*?)b
you can match
a[^ab]*b
i.e specify a character class which excludes the starting and ending delimiiters.
In the more general case, you can painstakingly construct an expression like
start(|[^e]|e(|[^n]|n(|[^d])))end
to capture a match between start and the first occurrence of end. Notice how the subexpression with nested parentheses spells out a number of alternatives which between them allow e only if it isn't followed by nd and so forth, and also take care to cover the empty string as one alternative which doesn't match whatever is disallowed at that particular point.
Of course, the correct approach in most cases is to use a proper parser for the format you are trying to parse, but sometimes, maybe one isn't available, or maybe the specialized tool you are using is insisting on a regular expression and nothing else.
Because you are using quantified subpattern and as descried in Perl Doc,
By default, a quantified subpattern is "greedy", that is, it will
match as many times as possible (given a particular starting location)
while still allowing the rest of the pattern to match. If you want it
to match the minimum number of times possible, follow the quantifier
with a "?" . Note that the meanings don't change, just the
"greediness":
*? //Match 0 or more times, not greedily (minimum matches)
+? //Match 1 or more times, not greedily
Thus, to allow your quantified pattern to make minimum match, follow it by ? :
/location="(.*?)"/
import regex
text = 'ask her to call Mary back when she comes back'
p = r'(?i)(?s)call(.*?)back'
for match in regex.finditer(p, str(text)):
print (match.group(1))
Output:
Mary
My regex pattern looks something like
<xxxx location="file path/level1/level2" xxxx some="xxx">
I am only interested in the part in quotes assigned to location. Shouldn't it be as easy as below without the greedy switch?
/.*location="(.*)".*/
Does not seem to work.
You need to make your regular expression lazy/non-greedy, because by default, "(.*)" will match all of "file path/level1/level2" xxx some="xxx".
Instead you can make your dot-star non-greedy, which will make it match as few characters as possible:
/location="(.*?)"/
Adding a ? on a quantifier (?, * or +) makes it non-greedy.
Note: this is only available in regex engines which implement the Perl 5 extensions (Java, Ruby, Python, etc) but not in "traditional" regex engines (including Awk, sed, grep without -P, etc.).
location="(.*)" will match from the " after location= until the " after some="xxx unless you make it non-greedy.
So you either need .*? (i.e. make it non-greedy by adding ?) or better replace .* with [^"]*.
[^"] Matches any character except for a " <quotation-mark>
More generic: [^abc] - Matches any character except for an a, b or c
How about
.*location="([^"]*)".*
This avoids the unlimited search with .* and will match exactly to the first quote.
Use non-greedy matching, if your engine supports it. Add the ? inside the capture.
/location="(.*?)"/
Use of Lazy quantifiers ? with no global flag is the answer.
Eg,
If you had global flag /g then, it would have matched all the lowest length matches as below.
Here's another way.
Here's the one you want. This is lazy [\s\S]*?
The first item:
[\s\S]*?(?:location="[^"]*")[\s\S]* Replace with: $1
Explaination: https://regex101.com/r/ZcqcUm/2
For completeness, this gets the last one. This is greedy [\s\S]*
The last item:[\s\S]*(?:location="([^"]*)")[\s\S]*
Replace with: $1
Explaination: https://regex101.com/r/LXSPDp/3
There's only 1 difference between these two regular expressions and that is the ?
The other answers here fail to spell out a full solution for regex versions which don't support non-greedy matching. The greedy quantifiers (.*?, .+? etc) are a Perl 5 extension which isn't supported in traditional regular expressions.
If your stopping condition is a single character, the solution is easy; instead of
a(.*?)b
you can match
a[^ab]*b
i.e specify a character class which excludes the starting and ending delimiiters.
In the more general case, you can painstakingly construct an expression like
start(|[^e]|e(|[^n]|n(|[^d])))end
to capture a match between start and the first occurrence of end. Notice how the subexpression with nested parentheses spells out a number of alternatives which between them allow e only if it isn't followed by nd and so forth, and also take care to cover the empty string as one alternative which doesn't match whatever is disallowed at that particular point.
Of course, the correct approach in most cases is to use a proper parser for the format you are trying to parse, but sometimes, maybe one isn't available, or maybe the specialized tool you are using is insisting on a regular expression and nothing else.
Because you are using quantified subpattern and as descried in Perl Doc,
By default, a quantified subpattern is "greedy", that is, it will
match as many times as possible (given a particular starting location)
while still allowing the rest of the pattern to match. If you want it
to match the minimum number of times possible, follow the quantifier
with a "?" . Note that the meanings don't change, just the
"greediness":
*? //Match 0 or more times, not greedily (minimum matches)
+? //Match 1 or more times, not greedily
Thus, to allow your quantified pattern to make minimum match, follow it by ? :
/location="(.*?)"/
import regex
text = 'ask her to call Mary back when she comes back'
p = r'(?i)(?s)call(.*?)back'
for match in regex.finditer(p, str(text)):
print (match.group(1))
Output:
Mary
My regex pattern looks something like
<xxxx location="file path/level1/level2" xxxx some="xxx">
I am only interested in the part in quotes assigned to location. Shouldn't it be as easy as below without the greedy switch?
/.*location="(.*)".*/
Does not seem to work.
You need to make your regular expression lazy/non-greedy, because by default, "(.*)" will match all of "file path/level1/level2" xxx some="xxx".
Instead you can make your dot-star non-greedy, which will make it match as few characters as possible:
/location="(.*?)"/
Adding a ? on a quantifier (?, * or +) makes it non-greedy.
Note: this is only available in regex engines which implement the Perl 5 extensions (Java, Ruby, Python, etc) but not in "traditional" regex engines (including Awk, sed, grep without -P, etc.).
location="(.*)" will match from the " after location= until the " after some="xxx unless you make it non-greedy.
So you either need .*? (i.e. make it non-greedy by adding ?) or better replace .* with [^"]*.
[^"] Matches any character except for a " <quotation-mark>
More generic: [^abc] - Matches any character except for an a, b or c
How about
.*location="([^"]*)".*
This avoids the unlimited search with .* and will match exactly to the first quote.
Use non-greedy matching, if your engine supports it. Add the ? inside the capture.
/location="(.*?)"/
Use of Lazy quantifiers ? with no global flag is the answer.
Eg,
If you had global flag /g then, it would have matched all the lowest length matches as below.
Here's another way.
Here's the one you want. This is lazy [\s\S]*?
The first item:
[\s\S]*?(?:location="[^"]*")[\s\S]* Replace with: $1
Explaination: https://regex101.com/r/ZcqcUm/2
For completeness, this gets the last one. This is greedy [\s\S]*
The last item:[\s\S]*(?:location="([^"]*)")[\s\S]*
Replace with: $1
Explaination: https://regex101.com/r/LXSPDp/3
There's only 1 difference between these two regular expressions and that is the ?
The other answers here fail to spell out a full solution for regex versions which don't support non-greedy matching. The greedy quantifiers (.*?, .+? etc) are a Perl 5 extension which isn't supported in traditional regular expressions.
If your stopping condition is a single character, the solution is easy; instead of
a(.*?)b
you can match
a[^ab]*b
i.e specify a character class which excludes the starting and ending delimiiters.
In the more general case, you can painstakingly construct an expression like
start(|[^e]|e(|[^n]|n(|[^d])))end
to capture a match between start and the first occurrence of end. Notice how the subexpression with nested parentheses spells out a number of alternatives which between them allow e only if it isn't followed by nd and so forth, and also take care to cover the empty string as one alternative which doesn't match whatever is disallowed at that particular point.
Of course, the correct approach in most cases is to use a proper parser for the format you are trying to parse, but sometimes, maybe one isn't available, or maybe the specialized tool you are using is insisting on a regular expression and nothing else.
Because you are using quantified subpattern and as descried in Perl Doc,
By default, a quantified subpattern is "greedy", that is, it will
match as many times as possible (given a particular starting location)
while still allowing the rest of the pattern to match. If you want it
to match the minimum number of times possible, follow the quantifier
with a "?" . Note that the meanings don't change, just the
"greediness":
*? //Match 0 or more times, not greedily (minimum matches)
+? //Match 1 or more times, not greedily
Thus, to allow your quantified pattern to make minimum match, follow it by ? :
/location="(.*?)"/
import regex
text = 'ask her to call Mary back when she comes back'
p = r'(?i)(?s)call(.*?)back'
for match in regex.finditer(p, str(text)):
print (match.group(1))
Output:
Mary
My regex pattern looks something like
<xxxx location="file path/level1/level2" xxxx some="xxx">
I am only interested in the part in quotes assigned to location. Shouldn't it be as easy as below without the greedy switch?
/.*location="(.*)".*/
Does not seem to work.
You need to make your regular expression lazy/non-greedy, because by default, "(.*)" will match all of "file path/level1/level2" xxx some="xxx".
Instead you can make your dot-star non-greedy, which will make it match as few characters as possible:
/location="(.*?)"/
Adding a ? on a quantifier (?, * or +) makes it non-greedy.
Note: this is only available in regex engines which implement the Perl 5 extensions (Java, Ruby, Python, etc) but not in "traditional" regex engines (including Awk, sed, grep without -P, etc.).
location="(.*)" will match from the " after location= until the " after some="xxx unless you make it non-greedy.
So you either need .*? (i.e. make it non-greedy by adding ?) or better replace .* with [^"]*.
[^"] Matches any character except for a " <quotation-mark>
More generic: [^abc] - Matches any character except for an a, b or c
How about
.*location="([^"]*)".*
This avoids the unlimited search with .* and will match exactly to the first quote.
Use non-greedy matching, if your engine supports it. Add the ? inside the capture.
/location="(.*?)"/
Use of Lazy quantifiers ? with no global flag is the answer.
Eg,
If you had global flag /g then, it would have matched all the lowest length matches as below.
Here's another way.
Here's the one you want. This is lazy [\s\S]*?
The first item:
[\s\S]*?(?:location="[^"]*")[\s\S]* Replace with: $1
Explaination: https://regex101.com/r/ZcqcUm/2
For completeness, this gets the last one. This is greedy [\s\S]*
The last item:[\s\S]*(?:location="([^"]*)")[\s\S]*
Replace with: $1
Explaination: https://regex101.com/r/LXSPDp/3
There's only 1 difference between these two regular expressions and that is the ?
The other answers here fail to spell out a full solution for regex versions which don't support non-greedy matching. The greedy quantifiers (.*?, .+? etc) are a Perl 5 extension which isn't supported in traditional regular expressions.
If your stopping condition is a single character, the solution is easy; instead of
a(.*?)b
you can match
a[^ab]*b
i.e specify a character class which excludes the starting and ending delimiiters.
In the more general case, you can painstakingly construct an expression like
start(|[^e]|e(|[^n]|n(|[^d])))end
to capture a match between start and the first occurrence of end. Notice how the subexpression with nested parentheses spells out a number of alternatives which between them allow e only if it isn't followed by nd and so forth, and also take care to cover the empty string as one alternative which doesn't match whatever is disallowed at that particular point.
Of course, the correct approach in most cases is to use a proper parser for the format you are trying to parse, but sometimes, maybe one isn't available, or maybe the specialized tool you are using is insisting on a regular expression and nothing else.
Because you are using quantified subpattern and as descried in Perl Doc,
By default, a quantified subpattern is "greedy", that is, it will
match as many times as possible (given a particular starting location)
while still allowing the rest of the pattern to match. If you want it
to match the minimum number of times possible, follow the quantifier
with a "?" . Note that the meanings don't change, just the
"greediness":
*? //Match 0 or more times, not greedily (minimum matches)
+? //Match 1 or more times, not greedily
Thus, to allow your quantified pattern to make minimum match, follow it by ? :
/location="(.*?)"/
import regex
text = 'ask her to call Mary back when she comes back'
p = r'(?i)(?s)call(.*?)back'
for match in regex.finditer(p, str(text)):
print (match.group(1))
Output:
Mary
Why the regular expression:
changes\s*=\s*[^A].*
matches
changes = AssignDictionary(out
What I want to find is no words starting with character "A" ([^A]) following the spaces (\s*), and it supposes not to match that line...what am I doing wrong?
The [^A] does not work because of backtracking. \s* matches zero or more whitespaces, and then the engine backtracks to accommodate for a non-A. Since there are two spaces after =, the second space is matched with [^A] -> there is a match.
See Step 12 & 13 (regex demo):
If you want to fail the match when there is an A after =, you need a negative lookahead:
changes\s*=(?!\s*A)\s*.*
^^^^^^^^
See another demo
Or another PCRE variation: changes\s*=\s*+(?!A).* (check if the character is not A after all whitespaces after =).
If your regex engine supports atomic groups or possessive quantifiers, you can make your regex work by preventing backtracking into the \s* construct:
changes\s*=\s*+[^A].*
^^ (possessive quantifier)
changes\s*=(?>\s*)[^A]\s*.*
^^ ^ - atomic group
And in case your engine does not support atomic groups, nor possessive quantifiers, you can disable backtracking with a capture group/backreference combination (to emulate an atomic group):
changes\s*=(?=(\s*))\1[^A].*
See this demo.
Still, the first solution with a lookahead is preferable since it seems the most universal one. The fastest looks to be the one with the possessive quantifier.
It is also possible to get that with plain regex. Just indicate what is not a valid character following the arbitrary number of spaces before the "not A". As you indicated this is: not A, but of course also "not a space".
Otherwise backtracking would allow a space preceeding an A in tat position to
be matched for the "not-A" and defeat your intentions.
Using changes\s*=\s*[^A\s].* will match anything that does not have an A or a white space after the spaces following the equals sign (and extend the match to end-of-line/end-of-input.