one of my fellow developers checked out from master and created new models for our website. He ran makemigrations, then ran migrate which obviously created the tables we wanted.
However, he never committed his changes to github and he altered the production database. So when I went in to add a table today, when I ran makemigrations it the terminal listed several tables that I knew already existed...I was like "YOLO!" and ran the migrate command anyways and it puked.
So, since the migrations file isn't in my migrate folder, django thinks it needs to create those tables...then it goes to create them and pukes because they're already there.
The other developer is out of town visiting family and can't commit the file.
How do I get this set straight? I think I need to run ./manage.py migrate my_app --fake
But I don't completely understand what that does so I don't want to take the YOLO route and really mess things up...
OK, I promise everybody out there that I have been working on this problem for 9.5 hours today. Turns out this was the answer:
Django migrations : relation already exists
However, there were some spelling/syntax errors that made it difficult to understand that this other person had the same problem as me.
to reiterate the solution:
type: ./manage.py makemigrations your_app
Navigate to the my_app/migrations folder and open the migrations file that was just created (usually looks like '0005_modelsandstuff_blablabla.py"
Delete the models that DON'T ALREADY EXIST. Save the file and close
type: ./manage.py migrate your_app --fake
this will then sync what is in the database now with your models schema without altering any of the actual database
type: ./manage.py makemigrations your_app
type: ./manage.py migrate your_app
And that's it! Everything is all synced up again. Just as a quick jab I would like to say JavaScript sucks. Thanks.
Following these steps should solve your problem.
Backup your database
Stash your changes (so that only the missing schema changes are picked up)
Create the migrations (this creates the already applied schema changes)
Run migrate with --fake (this will fake apply the already done schema changes)
Apply your changes
Create the migrations
Run migrate
I have trouble with django model migrations.
I have some models in my app, and I already have some data inside.
When I added some models in my application, and I run makemigrations, the app report that there is no change.
I know that sometimes some errors came when migrate, so I delete django_migrations table in my database and run makemigrations again, and now program found my new fields.
The problem now is that if I run migrate system tell me that some tables already exist. (Which is ok and correct, because they do). I don't want to delete those tables, because I have data already inside.
I can't run migrate --fake, because program will think that I already have all the tables, which is not true.
So, I am looking for a way to tell the program : run migration, if table exist skip it. (--fake it)
Another question is why is this happening to me, that makemigrations don't recognise my changes (some cache problems,...)?
How about doing this way ?
python manage.py makemigrations
(Skip this step if you have already have migration file ready)
It will create migrations for that package lets say with a name like 0001_initial.py
Edit the file manually so that you delete all models there except that was already created in database.
Now you do a fake migration. This will sync your database with models.
python manage.py migrate --fake
Then run makemigrations again to have rest of the tables created along with a new migration file.
python manage.py makemigrations
Regarding your other question, Why makemigrations didn't recogonize your models can be because of reasons like:
Migrations for those changes are already there in some migration file.
You missed it to mention package_name in INSTALLED_APPS but i believe you did it here.
every time you make changes to your models, try these steps :
python manage.py makemigrations [your app name]
then:
python manage.py migrate
it should work fine. but remember if you have already data(rows) in your tables you should specify the default value for each one the queries.
if not, Django prompt you to specify the default value for them
or you can just try to use blank=True or null=True in your fields like below :
website = models.URLField(blank=True)
the possible cause or this is that you have another migration in the same folder starts with the same prefix... maybe you make another migration on the same table on another branch or commit so it's saved to the db with the same prefix ie: 00010_migration_from_commit_#10, 00010_migration_from_commit_#11
the solution for this is to rename the migration file like this 00011_migration_from_commit_#11
I tried to edit the related migration file and commented the part where it creates that specific column, then ran python manage.py migrate
The main problem is the existing tables that are disabling the migration of the new tables, so the solution is straight-forward:
** Try to add managed = False to the existing dB so it won't be detected by migrate
** Redo it for all existing old tables :
class Meta:
managed=False
It sometimes gets boring when we have a lot of tables in the same application but it works perfectly!
I run python manage.py makemigrations and I get:
No changes detected
Then, python manage.py migrate and I get:
No migrations to apply.
Then, I try to push the changes to production:
git push heroku master
Everything up-to-date
Then, in production, I repeat the command:
heroku run python manage.py migrate
No migrations to apply.
Just in case, I run makemigrations in production:
heroku run python manage.py makemigrations
No changes detected
WHY then I get a
ProgrammingError at ....
column .... does not exist
"No changes detected" means the database is coherent with the code.
How can I debug this?¡?
I got the same problem (column not exist) but when I try to run migrate not with makemigrations (it is the same issue I believe)
Cause: I removed the migration files and replaced them with single pretending intial migration file 0001 before running the migration for the last change
Solution:
Drop tables involved in that migration of that app (consider a backup workaround if any)
Delete the rows responsible of the migration of that app from the table django_migrations in which migrations are recorded, This is how Django knows which migrations have been applied and which still need to be applied.
And here is how solve this problem:
log in as postgres user (my user is called posgres):
sudo -i -u postgres
Open an sql terminal and connect to your database:
psql -d database_name
List your table and spot the tables related to that app:
\dt
Drop them (consider drop order with relations):
DROP TABLE tablename ;
List migration record, you will see migrations applied classified like so:
id | app | name | applied
--+------+--------+---------+
SELECT * FROM django_migrations;
Delete rows of migrations of that app (you can delete by id or by app, with app don't forget 'quotes'):
DELETE FROM django_migrations WHERE app='yourapp';
log out and run your migrations merely (maybe run makemigrations in your case):
python manage.py migrate --settings=your.settings.module_if_any
Note: it is possible that in your case will not have to drop all the tables of that app and not all the migrations, just the ones of the models causing the problem.
I wish this can help.
Django migrations are recorded in your database under the 'django_migrations' table. This is how Django knows which migrations have been applied and which still need to be applied.
Have a look at django_migrations table in your DB. It may be that something went wrong when your migration was applied. So, delete the row in the table which has the migration file name that is related to that column that 'does not exist'. Then, try to re-run a migration.
Here's what i tried and it worked:
Go and add manually the column to your table
run python manage.py makemigrations
go back drop that column you added
run python manage.py migrate
I had a similar issue - the error message appeared when I clicked on the model on the django-admin site. I solved it by commenting out the field in models.py, then running migrations. Following this I uncommented the field and re ran the migrations. After that the error message disappeared.
My case might be a bit obscure, but if it helps someone, it is worth documenting here.
I was calling a function in one of my migrations, which imported a Model of said migration regularly, i.e.
from myApp.models import ModelX
The only way models should be imported in migrations would be using e.g. RunPython:
def myFunc(apps, schema_editor):
MyModel = apps.get_model('myApp 'MyModel')
and then calling that function like so:
class Migration(migrations.Migration):
operations = [
migrations.RunPython(initialize_mhs, reverse_code=migrations.RunPython.noop),
]
Additionally the original import worked until I modified the model in a later migration, making this error harder to locate.
So, I always run into this sort of problem, so today I decided to try and work it out at the database level. Thing is, I changed a model field name which Django didn't bother reflecting in a migration file. I only found out later when I ran into problems. I later looked at the migration files and discovered there was no migration for that change. But I didn't notice because I made other changes as well, so once I saw a migration file I was happy.
My advice. Create migration for each change one at a time. That way you get to see if it happened or not.
So here's my working through it in MySQL.
open mysql console.
show databases; # see all my dbs. I deleted a few
drop database <db-name>; # if needed
use <db-name>; # the database name for your django project
show tables; # see all tables in the database
DESCRIBE <table-name>; # shows columns in the database
SHOW COLUMNS FROM <db-name>; # same thing as above
ALTER TABLE <table-name> CHANGE <old-column-name> <new-column-name> <col-type>; # now I manually updated my column name
If you're using postgresql, just google the corresponding commands.
The issue was in the Models for me, for some reason Django was adding '_id' to the end of my Foreign Key column. I had to explicitly set the related named to the Foreign Key. Here 'Cards' is the parent table and 'Prices' is the child table.
class Cards(models.Model):
unique_id = models.CharField(primary_key=True, max_length=45)
name = models.CharField(max_length=225)
class Prices(models.Model):
unique_id = models.ForeignKey(Cards, models.DO_NOTHING)
Works after changing to:
class Cards(models.Model):
unique_id = models.CharField(primary_key=True, max_length=45)
name = models.CharField(max_length=225)
class Prices(models.Model):
unique_id = models.ForeignKey(Cards, models.DO_NOTHING, db_column='unique_id')
When I get this error, my extreme way to solve it is to reset my database:
Reset your database
For Postgresql on Heroku:
Heroku > your_app > Resources > database > add-ons > click on your database and open it
For postgresql
settings > Reset database
Delete all files in your_app > migrations > __pycache__ except __init.py__
Delete all files in your_app > migrations except __pycache__ folder and __init.py__
Then run:
python manage.py makemigrations
python manage.py migrate
python manage.py createsuperuser
type in to create your superuser, then run:
python manage.py makemigrations
python manage.py migrate
python manage.py
If you are able to inspect your models from your admin section, then it should be all okay now.
Just remove corresponding row migrations for that model in 'django_migrations' model in database.
And re run python manage.py migrate app_name
I tried all these answers with not much luck! What I did to have this problem solved with no harm was to go back through the migration files and find where the actual model was being created for the first time then manually add the field (in the column not being existed error message). Until if you run makemigrations --dry-run you get/see "No changes detected" and that worked. Basically, in my case, I had to carefully take my desired db changes back in time in proper migration file, rather creating a new migration now at the end of migration dependency chain.
Open the latest py file created after running the makemigrations command inside migrations folder of that particular app.
Inside class Migration there is a list attribute called 'operations'.
Remove the particular elements migrations.RemoveField(...).
Save and run python manage.py migrate.
A easier solution to the problem is to make your models exactly like it is in the migration first. and run python manage.py migrate.
Then revert those changes
Run
python manage.py makemigrations
python manage.py migrate
To check for which migrations are applied and which are not, use -:
python manage.py showmigrations
I solved a similar problem by deleting all migrations files (Don't forget to make a backup) and python manage.py makemigrations all of them into one clean file in development and pulling new files on the server. Before then I had dropped existing tables on the PostgreSQL.
I was getting this error for some reason when Django was looking for a column of type ForeignKey named category_id when the actual name in the database was category. I tried every Django solution I could imagine (renaming field, explicitly setting column name, etc.). I didn't want to drop tables or rows as this was a production database. The solution was simply to rename the column manually using SQL. In my case:
ALTER TABLE table_name
RENAME COLUMN category TO category_id;
Make sure you backup your database, ensure this won't break any other applications consuming that particular table, and consider having a fallback column if necessary.
What helped me in the end was simply dropping the database and creating it again as well as deleting all migrations files (including cache). (only removing migrations file didn't work for me at all)
sudo su - postgres
psql
DROP DATABASE 'yourdatabase';
CREATE DATABASE 'yourdatabase';
GRANT ALL PRIVILEGES ON DATABASE 'yourdatabase' to 'yourdjangouser';
then just
python manage.py makemigrations
python manage.py migrate
python manage.py runserver
If you're in development and you make some examples of data that's not important, this step is beneficial for me: just flush your data, make migrations, and migrate:
python manage.py flush
python manage.py makemigrations
python manage.py migrate
After that, you may create a new database from scratch, I hope this information was helpful.
Solved this issue by running
python manage.py migrate
in Heroku Bash shell
I made a change to my models, and I cannot for the life of me figure out how to get my database to reflect my models. So far I have tried the following:
python manage.py shelldb
SELECT * FROM sqlite_master WHERE type='table';
DROP TABLE appname_modelname;
When I tried that I got: "unknown command: shelldb".
I also tried:
python manage.py dbshell
DROP TABLE accounts_userreview;
No error, but my db still doesn't reflect my models.
Finally, I just altogether deleted my database by dragging it into the trash and then doing syncdb, it then made me create a new superuser, but STILL the database that was created does not reflect the changes to my models.
I'm at a loss here, What else can I do here? Also, I'm new to learning Django, is there some kind of layer in between the models and my database? I would assume there is since deleting and then rebuilding the database didn't work.
Would appreciate any advice here.
if you are on Django < 1.7 , you have to use some migration tool i.e. - South . Django 1.7 has inbuilt migration.
For more info migrations
Run these commands in terminal to make migrations for Django 1.7
python manage.py makemigrations
python manage.py syncdb
for Django < 1.7
use South
I'm using sqlite3 and pycharm to learn more about django, and googled to find that south is recommended to make it easier to modify models after they have been created.
I'm trying to follow the advice on http://south.aeracode.org/docs/tutorial/part1.html#starting-off.
The most success I've had so far is to create a simple model and run syncdb before adding south to installed_apps. That way the intial tables are created and I get a chance to create a super user. (Django admin seems to fret if there are no users).
Then I add south to installed_apps, and run django_manage.py schemamigration bookmarks --initial
It seems to work fine. A new directory is created called migrations with a couple of files in it in my app folder and an encouraging message.
"Created 0001_initial.py. You can now apply this migration with: ./manage.py migrate bookmarks"
The next step - django_manage.py" migrate bookmarks generates the following error message
django.db.utils.DatabaseError: no such table: south_migrationhistory.
I thought that table would be created in the first schememigration step. What am I missing? Can anyone help?
Marg
South uses a table if its own to keep track of which migrations have been applied. Before you can apply any migrations, this must have been created, using python ./manage.py syncdb.
As well as for setting up south, you will find syncdb sometimes necessary for non-south apps in your project, such as the very common django.contrib.auth.
Note that as a convenience, you can run both in one go like this
python ./manage.py syncdb --migrate
My latest (unsuccessful) effort was the following
Create application – synch db – superuser created
Test run –admin screen shows basic tables
Add south, and syncdb from command line with manage.py syncdb – south_migrationhistory table created. Add basic vanilla model
Tried various combinations of manage.py syncdb –manage, and
schemamigration from Pycharm (if run from within pycharm a
migrations directory is created within the app
– if run from the command line the directory does not seem to be
created.)
Django admin screen shows table – but if I try to edit
the table it says that it doesn’t exist
Check database structure
using SQLite browser - table for newly created model doesn’t exist
I’m starting to think that the whole thing is not worth the time wasting hassle – maybe I’m better off just modifying the tables in SQLite browser
Answer in the similar question:
Run syncdb to add the Django and South tables to the database.