I have tried to create envelope on my linux pop os system using miniconda. When I activate it, I can install packages using pip, but when I run my django instance it doesn't find the modules.
If I type which python is shows the miniconda path correctly. I can look in the site-packages folder and see the packages installed.
I've tried installing django-anymail and corsheaders and they are both not being found. It does find my locally installed apps.
If I use the command line and open python and then import, it does not recognize my modules installed in the virtual envelope either. I thought it was a problem with conda, so I also created an envelope using python's native method: python3 -m venv
I have the same problem with it finding pip install site-packages.
Is there a command I can run to show all available packages?
I hadn't realized I had aliased my python. Now it is working.
I've been following a Django tutorial and initially created virtualenv and a requirements file in it. Project was halfway and in working state. Today I activated virtualenv successfully and tried python manage.py runserver to get error
ImportError: Couldn't import Django. Are you sure it's installed and available on your PYTHONPATH environment variable? Did you forget to activate a virtual environment?
I realized it's not finding Django and just to be sure checked my requirements.txt file (which confirmed right Django version). Tried to reinstall it from the file using pip3 install -r requirements.txt (tried using just pip too) to get another error --
ModuleNotFoundError: No module named 'pip'
It seems the environment is unable to find any of the modules. I tried to reinstall pip also just to be sure, but then it couldn't find apt-get command.
OS: Mac OSX El Capitan 10.11.6
Python: 3.6.2
Django: 1.10.3 (in requirements file)
Try running python -m ensurepip (or python3 -m ensurepip) to see if pip is already installed:
In most cases, end users of Python shouldn’t need to invoke this module directly (as pip should be bootstrapped by default), but it may be needed if installing pip was skipped when installing Python (or when creating a virtual environment) or after explicitly uninstalling pip.
Whenever I am trying to compile the following code to get a line graph shows some errors. But I don't know how to fix it. Here is my code :
import plotly.plotly as py
import plotly.graph_objs as go
# Create random data with numpy
import numpy as np
N = 500
random_x = np.linspace(0, 1, N)
random_y = np.random.randn(N)
# Create a trace
trace = go.Scatter(
x = random_x,
y = random_y
)
data = [trace]
py.iplot(data, filename='basic-line')
Shows the following error :
mks#mks-H81M-S /media/mks/KUTUBUDDIN1/test $ python datdaPlot.py
Traceback (most recent call last):
File "datdaPlot.py", line 1, in <module>
import plotly.plotly as py
ImportError: No module named plotly.plotly
mks#mks-H81M-S /media/mks/KUTUBUDDIN1/test $
How can this be fixed?
Added:
According to Spandan Brahmbhatt, I have installed pip by sudo pip install plotly. But still shows the following error:
You will need to install them first.
pip install plotly
pip install cufflinks
In my case I wanted to use in a Jupyter Notebook in Windows 10 but was getting the same error
ModuleNotFoundError Traceback (most recent call last)
in
----> 1 import plotly.express as px
ModuleNotFoundError: No module named 'plotly'
Considering you can also install Anaconda in Linux Mint and these came with Anaconda (in my case), if you decide to go with Anaconda you'll have at least two options to install plotly
Anaconda Prompt
Anaconda Navigator
Once installed, you'll be able to use it without any problem
1. Anaconda Prompt
Open Anaconda Prompt
Run the following command
conda install -c plotly plotly=4.8.1
2. Anaconda Navigator
Open Anaconda Navigator
Inside of it, go to Environment, select All in the dropdown and search for plotly.
Then select plotly from that list and click Apply.
I had the same problem. I accidentally was using a file in my working directory named ploylt.py. I removed that file form the directory and it works fine now.
First make sure that you have installed plotly
pip install plotly
(Test) Open an empty file, type
import plotly
and save it with a .py extension. Then run it. If this works, then your installation was ok. Move any other file named plotly (with any extension) in a different directory
It will hopefully work.
Based on ImportError: No module named plotly.plotly, I assume you have not installed plotly module.
You can install it using pip
$ pip install plotly
or
$ sudo pip install plotly
Use this:
conda install -c https://conda.anaconda.org/plotly plotly
Firstly, I'm new to plotly 2, and I am not sure I can make you understand since I'm a Chinese.
Anyway, you can try this, for me, it works:
import plotly
plotly.offline.init_notebook_mode(connected=True)
import plotly.offline as py
import plotly.plotly as py: this command will communicate with a Plotly Cloud or Plotly Enterprise. get_figure downloads a figure from plot.ly or Plotly Enterprise. You need to provide credentials to download figures: Getting Started with Plotly for Python
Refer:
Why Python line plot shows : Don't have an account? plot.ly
If you are using jupyter notebook in windows, then open the Anaconda Powershell Prompt(better to open in admin mode) and use the below command.
pip install plotly
pip install cufflinks
If you are using python from command prompt or which is set in the Environment variable then open the command prompt and use the same command mentioned above.
Both use different instance of python. So, if you use the above mentioned pip command in Anaconda PowerShell than it will install the libraries(plotly and cufflinks) in the python folder that comes with anaconda package but not in the python folder that you are using form the command prompt or which is set in the Environment variable.
I had the same problem. I found the solution by going through the directories.
pip install is installing in default python lib folder, all you have to do is copy the plotly folder from python lib to jupyter notebook lib folder. Since I am using windows the directories were as following :
c:\python34\lib\site-packages
c:\Anacoda3\Lib\site-packages
In case you searched around like I did until I found the link below, but looked here first, hopefully this will save you some frustration.
Delete the plotly.py file in your root folder. The one you created to test the get started code.
After you do that you'll be searching for a while again unless you delete the .pyc file (and get the ImportError: bad magic number in 'plotly': b'\x03\xf3\r\n').
https://github.com/plotly/plotly.py/issues/723
I was also having the same issue, but then it was due to different versions of python.
You might want to try the following command as well: (assuming you have python3 installed)
sudo pip3 install plotly
pip3 install plotly --upgrade
python3 <filename.py>
Please ensure that all the packages that are being used are installed for one python version only. As in my case all packages were installed for python3 but then I was trying to run my code with "python filename.py" and somehow that did not work.
Moreover, I also setup the credentials by following the link: https://plot.ly/settings/api. Register yourself using the link https://plot.ly/settings/api. Then create a file ~/.plotly/.credentials with your username and authentication key.
Hi I ran into something similar on my PC and here is what I advise you to do because it worked for me:
Open your Anaconda Prompt and run pip install plotly==4.1.1 cufflinks
Note that the 4.1.1 here is the version of plotly.
Installation:
Terminal:
- You can find more information about both plotly and cufflinks here.
Anaconda, Jupyter Notebook and Visual Studio Code:
- I believe I ran into this error because I did not install plotly on my PC so you can find more information on various ways of installing plotly here.
Like #Ananada, I had named my test file "plotly.py", i.e. the one containing the import plotly.graph_objects as go statement. So Python was trying to import the module from the script file I was running. Doh! Renamed it and problem solved.
To install plotly:
conda install -c plotly plotly
To check whether the installation was successful:
python3 -m pip show plotly
This shows the version of plotly installed in case of successful installation.
This worked for me!
Activate your environment again after installing the package if you are using a virtual environment.
Do source bin/activate if using bash. See https://docs.python.org/3/tutorial/venv.html.
Check your folder ... If this a temporary/test folder, maybe just like me you are wasting your whole day trying to understand why you cannot import .... .. ..
Maybe, just like happened to me - you have ANOTHER plotly.py file in your folder. Yes, that one.
Actually the module plotly is not pre-installed and we need it to be installed on our machines before using. It can be installed by using pip command :
pip install plotly
Also, we can install cufflinks. Cufflinks are smart plots.
pip install cufflinks
When you will get an error using anaconda navigator plotly install.
Go to the particular environment in Anaconda Navigator.
Then open terminal for the environment.
Install the packages.
On my Laptop, I had to use this code
!pip install pip plotly
Installing the "!" is key for my installation
All the best
I'm working with Python 2.6.6 and have been trying to download tweepy, but whenever I import tweepy in the Python IDLE shell it comes back with a "No module named tweepy" error.
I've downloaded tweepy using
sudo pip install tweepy
And it goes right into /Library/Python/2.7/site-packages with no problems.
Then I cd from that path into tweepy and
python setup.py install
but this error message comes up
/Library/Frameworks/Python.framework/Versions/2.6/Resources/Python.app/Contents/MacOS/Python: can't open file 'python': [Errno 2] No such file or directory
I've gone through the path and everything is correct with Python at the end.
However, when I open up a Python IDLE shell and
import tweepy
the "No module named tweepy" error comes up.
I'd really appreciate any help!
pip is using Python 2.7, as you can tell from the site-packages path, while you are apparently trying to install for use with 2.6. Leaving aside the question of why you're using 2.6, the problem is easy enough to fix - install pip with Python 2.6.
Download get-pip.py, then (assuming your python command points to version 2.6) run:
sudo python get-pip.py
Once it's installed, you should be able to run
sudo pip2.6 install tweepy
and everything should work properly.
I have installed Django after activating my virtualenv but still I am getting following error
from django.core.management import execute_from_command_line
ImportError: No module named django.core.management
If you already activated your virtualenv (source /path/bin/activate) then check if you have installed Django.
pip install django
With next command you can see if Django was installed.
pip freeze | grep django
Another thing that you can try is to remove first line (#!/usr/bin/env python) in the manage.py file.
You should check if django is installed
Activate your environment, then run the following command to see which version is installed :
python -c "import django; print(django.get_version())"
I am using virtual environment so I added this line in manage.py:
sys.path.append('./myvenv/lib/python3.5/site-packages')
in which myvenv is the name of my virtual environment and version of my installed Python is 3.5.
This solved my issued.
I found that I had Python 3.4 and 2.7 installed concurrently, and the pip install django==1.7 command automagically decided the Python 3.4 /dist-packages was where it should live. I CD'd over to the Python 2.7 directory and re-piped it... and all is well.
sudo pip install django --upgrade
worked for me, i am not having virutal environment by the way.
I had the same problem when I was running Django from inside a virtual environment and then using another terminal window ran the command
python manage.py shell without first switching to the venv.
The problem was resolved after I switched back.
I found that I could import the django module from the python interpreter, but django-admin.py could not import it when run from the command line.
I confirmed that I was using the python interpreter in my virtual environment.
I was using a 64-bit version of python. Uninstalling, and installing the 32-bit version, then re-creating my venv solved this for me.
If you're using virtualenv, you can add it to your path using sys.path.append('./myvenv/lib/python3.5/site-packages').
Try closing and opening the terminal again. That worked for me too.