I just started learning regex and I'm trying to understand how it possible to do the following:
If I have:
helmut_rankl:20Suzuki12
helmut1195:wasserfall1974
helmut1951:roller11
Get:
helmut_rankl:20Suzuki1
helmut1195:wasserfall197
helmut1951:roller1
I tried using .$ which actually match the last character of a string, but it doesn't match letters and numbers.
How do I get these results from the input?
You could match the whole line, and assert a single char to the right if you want to match at least a single character.
.+(?=.)
Regex demo
If you also want to match empty strings:
.*(?=.)
This will do what you want with regex's match function.
^(.*).$
Broken down:
^ matches the start of the string
( and ) denote a capturing group. The matches which fall within it are returned.
.* matches everything, as much as it can.
The final . matches any single character (i.e. the last character of the line)
$ matches the end of the line/input
I want to design an expression for not allowing whitespace at the beginning and at the end of a string, but allowing in the middle of the string.
The regex I've tried is this:
\^[^\s][a-z\sA-Z\s0-9\s-()][^\s$]\
This should work:
^[^\s]+(\s+[^\s]+)*$
If you want to include character restrictions:
^[-a-zA-Z0-9-()]+(\s+[-a-zA-Z0-9-()]+)*$
Explanation:
the starting ^ and ending $ denotes the string.
considering the first regex I gave, [^\s]+ means at least one not whitespace and \s+ means at least one white space. Note also that parentheses () groups together the second and third fragments and * at the end means zero or more of this group.
So, if you take a look, the expression is: begins with at least one non whitespace and ends with any number of groups of at least one whitespace followed by at least one non whitespace.
For example if the input is 'A' then it matches, because it matches with the begins with at least one non whitespace condition. The input 'AA' matches for the same reason. The input 'A A' matches also because the first A matches for the at least one not whitespace condition, then the ' A' matches for the any number of groups of at least one whitespace followed by at least one non whitespace.
' A' does not match because the begins with at least one non whitespace condition is not satisfied. 'A ' does not matches because the ends with any number of groups of at least one whitespace followed by at least one non whitespace condition is not satisfied.
If you want to restrict which characters to accept at the beginning and end, see the second regex. I have allowed a-z, A-Z, 0-9 and () at beginning and end. Only these are allowed.
Regex playground: http://www.regexr.com/
This RegEx will allow neither white-space at the beginning nor at the end of your string/word.
^[^\s].+[^\s]$
Any string that doesn't begin or end with a white-space will be matched.
Explanation:
^ denotes the beginning of the string.
\s denotes white-spaces and so [^\s] denotes NOT white-space. You could alternatively use \S to denote the same.
. denotes any character expect line break.
+ is a quantifier which denote - one or more times. That means, the character which + follows can be repeated on or more times.
You can use this as RegEx cheat sheet.
In cases when you have a specific pattern, say, ^[a-zA-Z0-9\s()-]+$, that you want to adjust so that spaces at the start and end were not allowed, you may use lookaheads anchored at the pattern start:
^(?!\s)(?![\s\S]*\s$)[a-zA-Z0-9\s()-]+$
^^^^^^^^^^^^^^^^^^^^
Here,
(?!\s) - a negative lookahead that fails the match if (since it is after ^) immediately at the start of string there is a whitespace char
(?![\s\S]*\s$) - a negative lookahead that fails the match if, (since it is also executed after ^, the previous pattern is a lookaround that is not a consuming pattern) immediately at the start of string, there are any 0+ chars as many as possible ([\s\S]*, equal to [^]*) followed with a whitespace char at the end of string ($).
In JS, you may use the following equivalent regex declarations:
var regex = /^(?!\s)(?![\s\S]*\s$)[a-zA-Z0-9\s()-]+$/
var regex = /^(?!\s)(?![^]*\s$)[a-zA-Z0-9\s()-]+$/
var regex = new RegExp("^(?!\\s)(?![^]*\\s$)[a-zA-Z0-9\\s()-]+$")
var regex = new RegExp(String.raw`^(?!\s)(?![^]*\s$)[a-zA-Z0-9\s()-]+$`)
If you know there are no linebreaks, [\s\S] and [^] may be replaced with .:
var regex = /^(?!\s)(?!.*\s$)[a-zA-Z0-9\s()-]+$/
See the regex demo.
JS demo:
var strs = ['a b c', ' a b b', 'a b c '];
var regex = /^(?!\s)(?![\s\S]*\s$)[a-zA-Z0-9\s()-]+$/;
for (var i=0; i<strs.length; i++){
console.log('"',strs[i], '"=>', regex.test(strs[i]))
}
if the string must be at least 1 character long, if newlines are allowed in the middle together with any other characters and the first+last character can really be anyhing except whitespace (including ##$!...), then you are looking for:
^\S$|^\S[\s\S]*\S$
explanation and unit tests: https://regex101.com/r/uT8zU0
This worked for me:
^[^\s].+[a-zA-Z]+[a-zA-Z]+$
Hope it helps.
How about:
^\S.+\S$
This will match any string that doesn't begin or end with any kind of space.
^[^\s].+[^\s]$
That's it!!!! it allows any string that contains any caracter (a part from \n) without whitespace at the beginning or end; in case you want \n in the middle there is an option s that you have to replace .+ by [.\n]+
pattern="^[^\s]+[-a-zA-Z\s]+([-a-zA-Z]+)*$"
This will help you accept only characters and wont allow spaces at the start nor whitespaces.
This is the regex for no white space at the begining nor at the end but only one between. Also works without a 3 character limit :
\^([^\s]*[A-Za-z0-9]\s{0,1})[^\s]*$\ - just remove {0,1} and add * in order to have limitless space between.
As a modification of #Aprillion's answer, I prefer:
^\S$|^\S[ \S]*\S$
It will not match a space at the beginning, end, or both.
It matches any number of spaces between a non-whitespace character at the beginning and end of a string.
It also matches only a single non-whitespace character (unlike many of the answers here).
It will not match any newline (\n), \r, \t, \f, nor \v in the string (unlike Aprillion's answer). I realize this isn't explicit to the question, but it's a useful distinction.
Letters and numbers divided only by one space. Also, no spaces allowed at beginning and end.
/^[a-z0-9]+( [a-z0-9]+)*$/gi
I found a reliable way to do this is just to specify what you do want to allow for the first character and check the other characters as normal e.g. in JavaScript:
RegExp("^[a-zA-Z][a-zA-Z- ]*$")
So that expression accepts only a single letter at the start, and then any number of letters, hyphens or spaces thereafter.
use /^[^\s].([A-Za-z]+\s)*[A-Za-z]+$/. this one. it only accept one space between words and no more space at beginning and end
If we do not have to make a specific class of valid character set (Going to accept any language character), and we just going to prevent spaces from Start & End, The must simple can be this pattern:
/^(?! ).*[^ ]$/
Try on HTML Input:
input:invalid {box-shadow:0 0 0 4px red}
/* Note: ^ and $ removed from pattern. Because HTML Input already use the pattern from First to End by itself. */
<input pattern="(?! ).*[^ ]">
Explaination
^ Start of
(?!...) (Negative lookahead) Not equal to ... > for next set
Just Space / \s (Space & Tabs & Next line chars)
(?! ) Do not accept any space in first of next set (.*)
. Any character (Execpt \n\r linebreaks)
* Zero or more (Length of the set)
[^ ] Set/Class of Any character expect space
$ End of
Try it live: https://regexr.com/6e1o4
^[^0-9 ]{1}([a-zA-Z]+\s{1})+[a-zA-Z]+$
-for No more than one whitespaces in between , No spaces in first and last.
^[^0-9 ]{1}([a-zA-Z ])+[a-zA-Z]+$
-for more than one whitespaces in between , No spaces in first and last.
Other answers introduce a limit on the length of the match. This can be avoided using Negative lookaheads and lookbehinds:
^(?!\s)([a-zA-Z0-9\s])*?(?<!\s)$
This starts by checking that the first character is not whitespace ^(?!\s). It then captures the characters you want a-zA-Z0-9\s non greedily (*?), and ends by checking that the character before $ (end of string/line) is not \s.
Check that lookaheads/lookbehinds are supported in your platform/browser.
Here you go,
\b^[^\s][a-zA-Z0-9]*\s+[a-zA-Z0-9]*\b
\b refers to word boundary
\s+ means allowing white-space one or more at the middle.
(^(\s)+|(\s)+$)
This expression will match the first and last spaces of the article..
I came across single grouping concept in shell script.
cat employee.txt
101,John Doe,CEO
I was practising SED substitute command and came across with below example.
sed 's/\([^,]*\).*/\1/g' employee.txt
It was given that above expression matches the string up to the 1st comma.
I am unable to understand how this matches the 1st comma.
Below is my understanding
s - substitute command
/ delimiter
\ escape character for (
( opening braces for grouping
^ beginning of the line - anchor
[^,] - i am confused in this , is it negate of comma or mean something else?
why * and again .* is used to match the string up to 1st comma?
^ matches beginning of line outside of a character class []. At the beginning of a character class, it means negation.
So, it says: non-comma ([^,]) repeated zero or more times (*) followed by anything (.*). The matching part of the string is replaced by the part before the comma, so it removes everything from the first comma onward.
I know 'link only' answers are to be avoided - Choroba has correctly pointed out that this is:
non-comma ([^,]) repeated zero or more times () followed by anything (.). The matching part of the string is replaced by the part before the comma, so it removes everything from the first comma onward.
However I'd like to add that for this sort of thing, I find regulex quite a useful tool for visualising what's going on with a regular expression.
The image representation of your regular expression is:
Given the string "foo, bar", s/\([^,]*\).*/\1/g, and more specifically \([^,]\)*) means, "match any character that is not a comma" (zero or more times). Since "f" is not a comma, it matches "f" and "remembers" it. Because it is "zero or more times", it tries again. The next character is not a comma either (it is o), then, the regex engine adds that o to the group as well. The same thing happens for the 2nd o.
The next character is indeed a comma, but [^,] forbids it, as #choroba affirmed. What is in the group now is "foo". Then, the regex uses .* outside the group which causes zero or more characters to be matched but not remembered.
In the replacement part of the regex, \1 is used to place the contents of the remembered text ("foo"). The rest of the matched text is lost and that is how you remain with only the text up to the first comma.
I have some large number of strings which starts like DD_filename.
How can I extract the characters before _ using regular expression.
I tried learning using from here and in that it is given a.b will retrieve characters starting from a and ending on b
I tried similarly ^._ but it is not working for me.
^._ will only match one character before _. Try this pattern:
^.*?(?=_)
Starting from the beginning of the string, capture all non-underscore characters:
"^[^_]*"
The first ^ (caret) character means that the match starts from the beginning of the string. The brackets allow you to define a set of possible characters (character class). The second ^ character means "not". So the character class is "not underscore". The star means "zero or more". So in plain English: "match from the start of the string zero or more non underscore characters".
You can try something like
.*?(?=_)
. matches any character and *? is a reluctant quantifier. (?=_) is a positive lookahead to ensure our match is followed by an _.
If you want to only extract characters that occur at the beginning of a string you can add the ^ anchor: ^.*?(?=_). ^ matches the position before the first character in the string.
Just capture all characters that are not an underscore:
"[^_]*"
Regular Expression to get all characters before "-"
Check out #stema's answer. He gives four ways to do this, but the first is probably the best.
Match result = Regex.Match(text, #"^.*?(?=-)");
Console.WriteLine(result);
I have this regex:
(?:\S)\++(?:\S)
Which is supposed to catch all the pluses in a query string like this:
?busca=tenis+nike+categoria:"Tenis+e+Squash"&pagina=4&operador=or
It should have been 4 matches, but there are only 3:
s+n
e+c
s+e
It is missing the last one:
e+S
And it seems to happen because the "e" character has participated in a previous match (s+e), because the "e" character is right in the middle of two pluses (Teni s+e+S quash).
If you test the regex with the following input, it matches the last "+":
?busca=tenis+nike+categoria:"Tenis_e+Squash"&pagina=4&operador=or
(changed "s+e" for "s_e" in order not to cause the "e" character to participate in the match).
Would someone please shed a light on that?
Thanks in advance!
In a consecutive match the search for the next match starts at the position of the end of the previous match. And since the the non-whitespace character after the + is matched too, the search for the next match will start after that non-whitespace character. So a sequence like s+e+S you will only find one match:
s+e+S
\_/
You can fix that by using look-around assertions that don’t match the characters of the assumption like:
\S\++(?=\S)
This will match any non-whitespace character followed by one or more + only if it is followed by another non-whitespace character.
But tince whitespace is not allowed in a URI query, you don’t need the surrounding \S at all as every character is non-whitespace. So the following will already match every sequence of one or more + characters:
\++
You are correct: The fourth match doesn't happen because the surrounding character has already participated in the previous match. The solution is to use lookaround (if your regex implementation supports it - JavaScript doesn't support lookbehind, for example).
Try
(?<!\s)\++(?!\s)
This matches one or more + unless they are surrounded by whitespace. This also works if the plus is at the start or the end of the string.
Explanation:
(?<!\s) # assert that there is no space before the current position
# (but don't make that character a part of the match itself)
\++ # match one or more pluses
(?!\s) # assert that there is no space after the current position
If your regex implementation doesn't support lookbehind, you could also use
\S\++(?!\s)
That way, your match would contain the character before the plus, but not after it, and therefore there will be no overlapping matches (Thanks Gumbo!). This will fail to match a plus at the start of the string, though (because the \S does need to match a character). But this is probably not a problem.
You can use the regex:
(?<=\S)\++(?=\S)
To match only the +'s that are surrounded by non-whitespace.