Good day,
I'm looking for a regular expression that would validate the following email addresses:
a#domain.com, b#domain.com
So far, I have this:
^([\w+-.%]+#domain\.com,?\s*)+$
It should not return anything in case of:
a#domain.comb#domain.com or
a#domain.com b#domain.com
It should also return a result if a ; is entered.
Also, is there a way to ensure a result will be returned only when
there is a single # in an address?
Any help would be appreciated.
The regex you are looking for is ^(?>\b[\w+-.%]+#domain\.com(?:[,;]\s*)?)+\b$.
I am using atomic grouping with (?>...) so that no backreferences are created.
Result is as you request: a#domain.com, b#domain.com
Also tested with Expresso.
Related
I am supposed to validate comma separated email addresses and avoid invalid patterns like
email..email#domain.com,
.email#domain.com,
email#domain.web,
email.#domain.com,
email#-domain.com,
email#domain.web,
email#111.222.333.44444
currently I am using following Regular expression
regex = /^((\w+([-+.']\w+)*#\w+([-.]\w+)*\.([a-zA-Z])+([-.]\w+)*)*([,])*)*$/
(custom regex rule as in validation-engine)
For which I can not use email#domain99.com which can be a valid email address in my case
Please suggest me suitable answer!
EDIT- regex = /^((\w+([-+.']\w+)*#\w+([-.]\w+)*\.([a-zA-Z])+([-.]\w+)*)* ([,])*)*$/ this expression miserably failed when I used ,, instead of , to separate the values. Suggest a way please.
I use a jmeter for REST testing.
I have made a HTTP Request, and this is the response data:
{"id":11,"name":"value","password":null,"status":"ACTIVE","lastIp":"0.0.0.0","lastLogin":null,"addedDate":1429090984000}
I need just the ID (which is 11) in
{"id":11,....
I use the REGEX below :
([0-9].+?)
It works perfectly but it will be a problem if my ID more than 2 digits. I need to change the REGEX to :
([0-9][0-9].+?)
Is there any dynamic REGEX for my problem. Thank you for your attention.
Regards,
Stefio
If you want any integer between {"id": and , use the following Regular Expression:
{"id":(\d+),
However the smarter way of dealing with JSON data could be JSON Path Extractor (available via JMeter Plugins), going forward this option can be much easier to use against complex JSON.
See Using the XPath Extractor in JMeter guide (scroll down to "Parsing JSON") to learn more on syntax and use cases.
I suggest using the following regular expression:
"id":([^,]*),
This will first find "id": and then look for anything that is not a comma until it finds a comma. Note the character grouping is only around the value of the ID.
This will work for ANY length ID.
Edit:
The same concept works for almost any JSON data, for example where the value is quoted:
"key":"([^"]*)"
That regular expression will extract the value from given key, as long as value is quoted and does not contain quotes. It first finds "key": and then matches anything that is not a quote until the next quote.
You can use the quantifier like this:
([0-9]{2,}.+?)
It will catch 2 or more digits, and then any symbol, 1 or more times. If you want to allow no other characters after the digits, use * instead of +:
([0-9]{2,}.*?)
Regex demo
I need a regular expression to match the following domains as follows:
http://www.cnn.com/fred = www.cnn.com
cnn.com = cnn.com
www.cnn.com:8080 = www.cnn.com
I have the following regular expression (using pcre):
([^/]+://)?([^:/]+)
The above works fine in case 2 and 3 however with 1 i still have the http:// appended to the matching string, is there a regular expression option which i can use to skip the http part?
many thanks in advance
This one should suit your needs:
^(?:(?:f|ht)tps?://)?([^/:]+)
The first group will contain what you're looking for.
this looks like the closest i could get to what i want not perfect but seems to gets the job done
www?([^/:]+)
I have a set of strings that I'd like to parse in MATLAB 2012 that all have the following format:
string-int-int-int-int-string
I'd like to pluck out the third integer (the rest are 'don't cares'), but I haven't used MATLAB in ages and need to refresh on regular expressions. I tried using the regular expression '(.*)-(.*)-(.*)-\d-(.*)' but no dice. I did check out the MATLAB regexp page, but wasn't able to figure out how to apply that information to this case.
Anyone know how I might get the desired result? If so, could you explain what the expression you're using is doing to get that result so that others might be able to apply the answer to their unique situation?
Thanks in advance!
str = 'XyzStr-1-2-1000-56789-ILoveStackExchange.txt';
[tok] = regexp(str, '^.+?-.+?-.+?-(\d+?)-.+?-.+?', 'tokens');
tok{:}
ans =
'1000'
Update
Explanation, upon request.
^ - "Anchor", or match beginning of string.
.+? - Wildcard match, one or more, non-greedy.
- - Literal dash/hyphen.
(\d+?) - Digits match, one or more, non-greedy, captured into a token.
^.*?-.*?-.*?-(\d+)-.*?-.*?$
OR
^(?:[^-]*?-){3}(\d+)(?:.*?)$
Group1 now contains your required data
I was using a regular expression for email formats which I thought was ok but the customer is complaining that the expression is too strict. So they have come back with the following requirement:
The email must contain an "#" symbol and end with either .xx or .xxx ie.(.nl or .com). They are happy with this to pass validation. I have started the expression to see if the string contains an "#" symbol as below
^(?=.*[#])
this seems to work but how do I add the last requirement (must end with .xx or .xxx)?
A regex simply enforcing your two requirements is:
^.+#.+\.[a-zA-Z]{2,3}$
However, there are email validation libraries for most languages that will generally work better than a regex.
I always use this for emails
^([a-zA-Z0-9_\-\.]+)#((\[[0-9]{1,3}" +
#"\.[0-9]{1,3}\.[0-9]{1,3}\.)|(([a-zA-Z0-9\-]+\" +
#".)+))([a-zA-Z]{2,4}|[0-9]{1,3})(\]?)$
Try http://www.ultrapico.com/Expresso.htm as well!
It is not possible to validate every E-Mail Adress with RegEx but for your requirements this simple regex works. It is neither complete nor does it in any way check for errors but it exactly meets the specs:
[^#]+#.+\.\w{2,3}$
Explanation:
[^#]+: Match one or more characters that are not #
#: Match the #
.+: Match one or more of any character
\.: Match a .
\w{2,3}: Match 2 or 3 word-characters (a-zA-Z)
$: End of string
Try this :
([\w-\.]+)#((?:[\w]+\.)+)([a-zA-Z]{2,4})\be(\w*)s\b
A good tool to test our regular expression :
http://gskinner.com/RegExr/
You could use
[#].+\.[a-z0-9]{2,3}$
This should work:
^[^#\r\n\s]+[^.#]#[^.#][^#\r\n\s]+\.(\w){2,}$
I tested it against these invalid emails:
#exampleexample#domaincom.com
example#domaincom
exampledomain.com
exampledomain#.com
exampledomain.#com
example.domain#.#com
e.x+a.1m.5e#em.a.i.l.c.o
some-user#internal-email.company.c
some-user#internal-ema#il.company.co
some-user##internal-email.company.co
#test.com
test#asdaf
test#.com
test.#com.co
And these valid emails:
example#domain.com
e.x+a.1m.5e#em.a.i.l.c.om
some-user#internal-email.company.co
edit
This one appears to validate all of the addresses from that wikipedia page, though it probably allows some invalid emails as well. The parenthesis will split it into everything before and after the #:
^([^\r\n]+)#([^\r\n]+\.?\w{2,})$
niceandsimple#example.com
very.common#example.com
a.little.lengthy.but.fine#dept.example.com
disposable.style.email.with+symbol#example.com
other.email-with-dash#example.com
user#[IPv6:2001:db8:1ff::a0b:dbd0]
"much.more unusual"#example.com
"very.unusual.#.unusual.com"#example.com
"very.(),:;<>[]\".VERY.\"very#\\ \"very\".unusual"#strange.example.com
postbox#com
admin#mailserver1
!#$%&'*+-/=?^_`{}|~#example.org
"()<>[]:,;#\\\"!#$%&'*+-/=?^_`{}| ~.a"#example.org
" "#example.org
üñîçøðé#example.com
üñîçøðé#üñîçøðé.com