I tried to setup sandbox for django development
I have forwarded the port in provision like this
config.vm.network:forwarded_port, host: 4567, guest: 8000
The server on guest started with
System check identified no issues (0 silenced).
March 19, 2015 - 20:50:37
Django version 1.7.7, using settings 'my_site.settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CONTROL-C.
then I open the web browser on host machine and type in
http://127.0.0.1:4567/
Failed to connect to server.
Start the dev server with
python manage.py runserver 0.0.0.0:8000
so that it listens to every interface of port 8000.
You don't need to forward the port on Vagrant for accessing Django server from the host machine. What I usually do is start the server on the guest using
python manage.py runserver 0.0.0.0:8000
and then access it from the host using
"IP_address_of_guest_machine":8000
Related
I have used the same code as the tutorial on the
drf website
When i run
python manage.py runserver
it gives me this in the terminal
Watching for file changes with StatReloader
Performing system checks...
System check identified no issues (0 silenced).
July 10, 2021 - 07:12:08
Django version 3.2.5, using settings 'drftut.settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CONTROL-C.
Firefox gives me this error:
The connection has timed out
The server at 127.0.0.1 is taking too long to respond.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer’s network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
I'm also using wsl1 and vscode remote desktop for wsl and im running this inside a python enviroment
kill $(lsof -t -i:8000)
Use this command in terminal or cmd to kill the process which is already running on PORT 8000.
If this is also not worked for you, then try to runserver on another PORT like so python manage.py runserver 5000 or any other free port
I'm following this tutorial online https://simpleisbetterthancomplex.com/tutorial/2016/10/14/how-to-deploy-to-digital-ocean.html
I get to an intermediary step where I want to check if I can access the app on the IP address. I run python manage.py runserver 0.0.0.0:8000 which returns the following:
System check identified no issues (0 silenced).
November 22, 2018 - 17:41:08
Django version 2.1.3, using settings 'mysite.settings'
Starting development server at http://0.0.0.0:8000/
Quit the server with CONTROL-C.
So no errors. Then I navigate to my_droplet_ip:8000 and I get a timeout. "took to long to respond."
I am running the runserver command from a user rather than root. Don't know if that matters...
Any idea what's going on here?
I had to expose the port 8000 by running the command sudo ufw allow 8080. Wasn't mentioned anywhere in the tutorial...
This is probably a very basic question. I SSH to my virtual Ubuntu server and start a django webserver running on localhost:
Downloading/unpacking django
Downloading Django-1.9.5-py2.py3-none-any.whl (6.6MB): 6.6MB downloaded
Installing collected packages: django
Successfully installed django
Cleaning up...
Performing system checks...
System check identified no issues (0 silenced).
You have unapplied migrations; your app may not work properly until they are applied.
Run 'python manage.py migrate' to apply them.
April 13, 2016 - 14:16:19
Django version 1.9.5, using settings 'mysite.settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CONTROL-C.
The Ubuntu server has a static IP [x.xxx.xxx.xxx] so from another machine on another network I try to access the above website in a browser using that static IP address:
x.xxx.xxx.xxx:8000
But I get:
This site can’t be reached
x.xxx.xxx.xxx refused to connect.
ERR_CONNECTION_REFUSED
So I assume that I cannot access the website like this and that is only available on the host it self even though the host has an external/static IP address?
Edit:
The answer is also in:
https://docs.djangoproject.com/en/1.9/intro/tutorial01/#the-development-server
python manage.py runserver 0.0.0.0:8000
You need to run your web server on 0.0.0.0:8000, then externally you would use either ip or host name to access. Using 0.0.0.0 means the django service would listen to all configured network interfaces.
Check wikipedia on details about 0.0.0.0.
Another answer on serverfault could be helpful.
I'm following the django tutorial: version 1.8, Ubuntu 10.04, python 3.4 in a virtual environment. I seem to create a django project (yatest) on my Ubuntu server just fine and I start the development server:
(v1)cj#drop1:~/www/yatest$ python manage.py runserver
Performing system checks...
System check identified no issues (0 silenced).
August 09, 2015 - 04:37:33
Django version 1.8.3, using settings 'yatest.settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CONTROL-C.
but when I browse to http://myserver:8000 all I get in response is 'ERR_EMPTY_RESPONSE'.
This is the first part of the tutorial before an app is even created. At this early stage in the tutorial it doesn't mention any error log I can check. My telnet client doesn't say anything crashed, and 'ctl-c' will shutdown the server process with no complaints.
Using netstat -lntp I verified no other processes are using port 8000. I do not have Apache installed. I do have gunicorn and nginx installed but both are stopped and not in use yet in the tutorial.
I'm rather new to linux; I could use some help finding an error log or other debugging tools to solve this. I don't doubt I've missed some basic OS setting or something to enable TCP access, etc..
Thanks
Clark
Found my mistake. When starting a dev django server on dedicated server one MUST include the dedicated server's address in the command. This is not needed when launching a dev server on the same machine as your browser. So instead of
$python manage.py runserver
you have to run
$python manage.py runserver <server ip>:8000.
So this is my inglorious start on stack exchange. You saw nothing! :P
If you're running natively in an virtual envrionment, then you need to specify a port and address:
python manage.py runserver 127.0.0.1:8000
For containers, it's easiest to listen to all addresses:
python manage.py runserver 0.0.0.0:8000
For anybody using PyCharm in a docker environment, it's also worth knowing that PyCharm will override your docker-compose configuration to change the runserver command to bind to the port specified in the Host option in your Run/Debug Configurations window.
Make sure you set the Host to 0.0.0.0 and the port to 8000 if you want to use the debugger etc.
If you don't want the trouble to determine server ip (ie when you're using containers), you can listen to 0.0.0.0:8000
python manage.py runserver 0.0.0.0:8000
I am testing RTD to build our API docs implementation, so running a local installation of RTD in a virtualenv within a debian VM. The ./manage.py runserver command runs the RTD server successfully.
Validating models...
0 errors found
March 25, 2015 - 03:11:57
Django version 1.6.10, using settings 'settings.sqlite'
Starting development server at http://127.0.0.1:8000/
To access the RTD admin console from my laptop browser (outside the VM) I would like to change the localhost to the public IP. For that, I changed the IP references in:
/etc/hosts
settings/sqlite.py (section
Internal_ips, and a few other occurrences)
But, it continues to build the server at http://127.0.0.1:8000/
Where should I be configuring this? What else should I be doing?
RESOLVED
Run the RTD server as:
./manage.py runserver 0.0.0.0:8000
OR
./manage.py runserver [VM IP ADDRESS]:8000