I am trying to deploy a Django app on to Heroku but when I type git push heroku master, I get this output:
Counting objects: 1213, done.
Compressing objects: 100% (1184/1184), done.
Writing objects: 100% (1213/1213), 4.36 MiB | 504.00 KiB/s, done.
Total 1213 (delta 449), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote:
remote: ! Push rejected, no Cedar-supported app detected
remote:
remote: Verifying deploy...
remote:
remote: ! Push rejected to article-django.
remote:
To https://git.heroku.com/article-django.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/article-django.git'
I created a requirements.txt file, as advised in Heroku push rejected, no Cedar-supported app detected and I then typed in pip install -r requirements.txt before typing in git push heroku master again but I got the same output and so I need to know how to let Heroku know requirements.txt exists so I don't get this same error again.
I typed in git commit -m 'another commit' and I got this output:
Your branch is up-to-date with 'django/master'.
Untracked files:
procfile
requirements.txt
I then typed in these commands:
git add procfile
git add requirements.txt
I typed in git commit -m 'another commit' and then git push heroku master, which worked.
I'm not really sure, but maybe you miss to add a [Procfile].(https://devcenter.heroku.com/articles/procfile) This file is neccesary to declare which server/process is going to run the dyno.
Related
So I try to make a very simple test app to run with Heroku. Its my 3rd attempt from complete scratch. I have a single python file with very minimal content
from flask import Flask
app = Flask(__name__)
#app.route("/")
def test():
return "test"
if __name__ == '__main__':
app.run()
the file is named test.py, my directory also includes Procfile
web: gunicorn app:test
and requirments.txt
click==7.1.2
Flask==1.1.2
gunicorn==20.1.0
itsdangerous==1.1.0
Jinja2==2.11.3
MarkupSafe==1.1.1
Werkzeug==1.0.1
to top it off I have gitignore to ensure IDE files do not interfere,
.idea
.Heroku.iml
and runtime.txt
python-3.6.0
I then try to create an app using
heroku create <appname>
I then use second URL it returns in the command
git remote add heroku <url>
. Afterwards I do
git add .
git commit -m "some message"
git push heroku main
and get the following error.
To https://git.heroku.com/forgotten-fox.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/forgotten-fox.git'
I then try to do it using
git push heroku master
instead but no changes occur.
I also try to force it to use python build pack with
heroku buildpack:set heroku/python --app <appname>
as above the error it states that
Building on the Heroku-20 stack
remote: -----> Using buildpack: heroku/python
remote: -----> App not compatible with buildpack: https://buildpack-registry.s3.amazonaws.com/buildpacks/heroku/python.tgz
remote: More info: https://devcenter.heroku.com/articles/buildpacks#detection-failure
I don't know how to use git mostly, but my friend advised me to create remote repository and attach it to Heroku but I was not able to find how to do the attachment.
If anyone knows what causes that and / or how to solve it i would really appreciate if you share the knowledge.
Update:
Thanks for pointing out wrong name for requirements file, I've renamed it. I`ve also changed my Procfile to
web: gunicorn test:app
.
Sadly it doesn't resolve the issue (yes I did commit and push the changes made).
Here is the error messages:
for git push heroku master :
Enumerating objects: 11, done.
Counting objects: 100% (11/11), done.
Delta compression using up to 6 threads
Compressing objects: 100% (9/9), done.
Writing objects: 100% (11/11), 1.66 KiB | 1.66 MiB/s, done.
Total 11 (delta 0), reused 0 (delta 0), pack-reused 0
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Building on the Heroku-20 stack
remote: -----> Using buildpack: heroku/python
remote: -----> App not compatible with buildpack: https://buildpack-registry.s3.amazonaws.com/buildpacks/heroku/python.tgz
remote: More info: https://devcenter.heroku.com/articles/buildpacks#detection-failure
remote:
remote: ! Push failed
remote: !
remote: ! ## Warning - The same version of this code has already been built: 36fb38193ecf8aa8d27f79682de049be81cb8807
remote: !
remote: ! We have detected that you have triggered a build from source code with version 36fb38193ecf8aa8d27f79682de049be81cb8807
remote: ! at least twice. One common cause of this behavior is attempting to deploy code from a different branch.
remote: !
remote: ! If you are developing on a branch and deploying via git you must run:
remote: !
remote: ! git push heroku <branchname>:main
remote: !
remote: ! This article goes into details on the behavior:
remote: ! https://devcenter.heroku.com/articles/duplicate-build-version
remote:
remote: Verifying deploy...
remote:
remote: ! Push rejected to forgotten-fox.
remote:
To https://git.heroku.com/forgotten-fox.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/forgotten-fox.git'
and here for git heroku push main:
error: src refspec main does not match any
error: failed to push some refs to 'https://git.heroku.com/forgotten-fox.git'
.
Update
Ok, sorry everyone, I'm generally retarded. I missed the obvious part of error about build back, here it states the final fix I needed for my app to work.
the issue is that you have to use
web: gunicorn test:app
instead of
web: gunicorn app:test
the correct format is
gunicorn <filename>:<app object>
When I'm trying to deploy a Django app to Heroku, encounter the identical problem as python - Collectstatic error while deploying Django app to Heroku - Stack Overflow
it starts to build, download and installs everything, but that's what I get when it comes to collecting static files:
$ git push heroku master
Counting objects: 5375, done.
Total 5375 (delta 1092), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Python app detected
remote: -----> Installing requirements with pip
remote:
...
remote:
remote: ! Error while running '$ python manage.py collectstatic --noinput'.
remote: See traceback above for details.
remote:
remote: You may need to update application code to resolve this error.
remote: Or, you can disable collectstatic for this application:
remote:
remote: $ heroku config:set DISABLE_COLLECTSTATIC=1
remote:
remote: https://devcenter.heroku.com/articles/django-assets
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy....
remote:
remote: ! Push rejected to fierce-cove-94300.
remote:
To https://git.heroku.com/fierce-cove-94300.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/fierce-cove-94300.git'
I tried all its answers, but not helps.
Additional I tried Django and Static Assets | Heroku Dev Center to configure the setting and install whitenoise and commit changes.
The problem is not solved.
Disable auto collectstatic:
heroku config:set DISABLE_COLLECTSTATIC=1
Then push your project to heroku. After the deploy is done, manually collectstatic as below:
heroku run python manage.py collectstatic
If you still get errors, your static files config is probably the reason. Try making it simple, remove whitenoise and use a s3 bucket for example.
I'm trying to deploy a large django project to heroku. I installed Heroku CLI, logged in, created an app and ran:
git push heroku master
I have a Pipfile and requirements.txt already set up. I added a runtime.txt to specify that I need python 2.7. This is also in the Pipfile. This is what I get from pushing to heroku:
Counting objects: 12159, done.
Delta compression using up to 2 threads.
Compressing objects: 100% (4853/4853), done.
Writing objects: 100% (12159/12159), 20.94 MiB | 1.82 MiB/s, done.
Total 12159 (delta 6859), reused 12036 (delta 6751)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Python app detected
remote: -----> Installing python-3.6.4
remote: -----> Installing pip
remote: -----> Installing dependencies with Pipenv 11.8.2…
remote: Your Pipfile.lock (3b2ba9) is out of date. Expected: (83a5b4).
remote: Aborting deploy.
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy....
remote:
remote: ! Push rejected to camp-infinity.
remote:
To https://git.heroku.com/camp-infinity.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/camp-infinity.git'
I'm not sure why it tries to install python 3, and it also doesn't like my Pipfile.lock file. I've tried deleting it and generating it again with pipenv install but that didn't change anything.
Make sure you have initialised your environment in Python 2.X with pipenv --two, then - given your code runs locally and all dependencies are specified in your Pipfile - run pipenv install and commit all changes including the Pipfile.lock to your local git repo (git add * && git commit -m "your message"). Finally push to heroku. Hope it now builds correctly.
I am trying to host my dango rest app on heroku. When i run
git push heroku master
I get the error log
remote: -----> Python app detected
remote: ! The latest version of Python 3 is python-3.6.4 (you
are using python-3.6.3, which is unsupported).
remote: ! We recommend upgrading by specifying the latest
version (python-3.6.4).
remote: Learn More:
https://devcenter.heroku.com/articles/python-runtimes
remote: -----> Installing requirements with pip
remote: Collecting pkg-resources==0.0.0 (from -r
/tmp/build_76cc8692e5f28e80c394427df6e4d58b/requirements.txt (line
9))
remote: Could not find a version that satisfies the
requirement pkg-resources==0.0.0 (from -r /
tmp/build_76cc8692e5f28e80c394427df6e4d58b/requirements.txt (line 9))
(from versions: )
remote: No matching distribution found for pkg-
resources==0.0.0 (from -r
/tmp/build_76cc8692e5f28e80c394427df6e4d58b/requirements.txt (line
9))
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to myapp.
remote:
To https://git.heroku.com/myapp.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to
'https://git.heroku.com/myapp.git'
The requirements.txt file is
dj-database-url==0.4.2
Django==1.11.2
django-rest-auth==0.9.2
djangorestframework==3.6.4
djangorestframework-jwt==1.11.0
gunicorn==19.7.1
olefile==0.44
Pillow==4.2.0
psycopg2==2.7.3
PyJWT==1.5.3
pytz==2017.2
six==1.11.0
whitenoise==3.3.1
push is rejected by heroku. please help.
Does your local requirements.txt match requirements.txt from master branch?
I had the same problem and finaly I realized that my master branch had that pkg-resources line in requirements.txt while my local copy hadn't. I deleted that line from requirements.txt, did git commit, git push and next time I tried to push my app to heroku I succeed.
I'm attempting to upgrade several Django apps on Heroku to Cedar-14 using the following commands from Heroku's documentation:
➜ project-name git:(master) ✗ heroku stack:set cedar-14
Stack set. Next release on project-name will use cedar-14.
Run `git push heroku master` to create a new release on cedar-14.
➜ project-name git:(master) ✗ git commit --allow-empty -m "Upgrading to Cedar-14"
[master 3710f78] Upgrading to Cedar-14
➜ project-name git:(master) ✗ git push heroku master
Counting objects: 1, done.
Writing objects: 100% (1/1), 191 bytes | 0 bytes/s, done.
Total 1 (delta 0), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Python app detected
remote: -----> Installing runtime (python-2.6.9)
remote: -----> Installing dependencies with pip
remote: /app/tmp/buildpacks/python/bin/steps/pip-install: line 7: /app/.heroku/python/bin/pip: No such file or directory
remote:
remote: ! Push rejected, failed to compile Python app
remote:
remote: Verifying deploy...
remote:
remote: ! Push rejected to project-name.
remote:
To https://git.heroku.com/project-name.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/project-name.git'
It appears that the failure has something to do with pip. I'm wondering if I'm missing some kind of requirement? Here is the contents of my requirements.txt:
Django==1.4.3
PyYAML==3.10
South==0.7.6
astroid==1.0.1
boto==2.27.0
coverage==3.6
dj-database-url==0.2.1
django-adminplus==0.1.7
django-fields==0.2.0
django-grappelli==2.4.0
django-jenkins==0.14.0
django-storages==1.1.5
-e git+https://github.com/toastdriven/django-tastypie.git#eee008f3eef0f756b32635e7b74c1c9732cf593c#egg=django_tastypie-dev
feedparser==5.1.2
gunicorn==0.14.6
logilab-astng==0.24.3
logilab-common==0.59.1
mimeparse==0.1.3
newrelic==2.8.0.7
psycopg2==2.4.5
pycrypto==2.6.1
pycurl==7.19.0
pylint==0.28.0
python-dateutil==1.5
raven==4.0.3
requests==1.0.4
six==1.6.1
stripe==1.7.7
wsgiref==0.1.2
(The answer to this actually comes form user Kenneth Reitz, which was answered on the Heroku support channel. Thanks!)
Since this didn't appear to be a problem related to the application code, the Heroku team suggested I purge the build cache, using this tool: https://github.com/heroku/heroku-repo
The commands I ran were:
heroku plugins:install heroku-repo
heroku repo:purge_cache -a project-name
That seemed to do the trick!