I am trying to run Eclipse with the Clang compiler without success. First I went here http://clang.llvm.org/get_started.html and followed the instructions 1 through 8 successfully. I also installed the llvm toolchain via Eclipse marketplace.
What do I do next to successfully compile with Clang? From the installation I have two folders, llvm and build, where do I put them? How do I connect this to Eclipse?
I also downloaded lld in case I needed it since the llvm-ld doesn't work anymore. Below is my error message. I'll be so grateful if someone can help me figure this out! I've wasted a lot of hours on this.
20:09:47 **** Incremental Build of configuration Debug for project recursion ****
Info: Internal Builder is used for build
clang -O0 -emit-llvm -g3 -Wall -c -fmessage-length=0 -o recursiveprint.bc ../recursiveprint.c
lld -v -native -o recursion recursiveprint.bc
Cannot run program "lld": Unknown reason
Error: Program "lld" not found in PATH
PATH=[/usr/bin:/bin:/usr/sbin:/sbin]
20:09:47 Build Finished (took 74ms)
Related
I struggle with Caffe compilation. Unfortunately I failed to compile it.
Steps I followed:
git clone https://github.com/BVLC/caffe.git
cd caffe
mkdir build
cd build
cmake ..
make all
Running make all fails with the following error message:
[ 2%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile.dir/util/cuda_compile_generated_im2col.cu.o
In file included from /usr/include/cuda_runtime.h:59:0,
from <command-line>:0:
/usr/include/host_config.h:82:2: error: #error -- unsupported GNU version! gcc 4.9 and up are not supported!
#error -- unsupported GNU version! gcc 4.9 and up are not supported!
^
CMake Error at cuda_compile_generated_im2col.cu.o.cmake:207 (message):
Error generating /mydir/caffe/build/src/caffe/CMakeFiles/cuda_compile.dir/util/./cuda_compile_generated_im2col.cu.o
Software version:
OS: Debian.
gcc version: 5.3.1.
nvcc version: 6.5.12.
cat /proc/driver/nvidia/version result:
NVRM version: NVIDIA UNIX x86_64 Kernel Module 352.63 Sat Nov 7 21:25:42 PST 2015
GCC version: gcc version 4.8.5 (Debian 4.8.5-3)
Attempts to solve the problem
1st try
Simple solutions are often best ones, so (as suggested here) I tried to comment out macro checking gcc version from /usr/include/host_config.h (line 82). Unfortunately it doesn't work and compilation fails badly:
1 catastrophic error detected in the compilation of "/tmp/tmpxft_000069c2_00000000-4_im2col.cpp4.ii".
2nd try
I tried to run:
cmake -D CMAKE_CXX_COMPILER=g++-4.8 ..
make
but it fails with exactly the same error message (even though g++-4.8 should be accepted).
3rd try
I've found similar problem (though not related to Caffe) and I tried to solve it as suggested in the accepted answer.
What I did:
I've ran grep -iR "find_package(CUDA" caffe command and found Cuda.cmake file which has find_package(CUDA 5.5 QUIET) in line 225.
I added set(CUDA_HOST_COMPILER /usr/bin/gcc-4.8) to Cuda.cmake, line before line: find_package(CUDA 5.5 QUIET).
I removed everything from build directory and ran cmake and make again - with and without -D CMAKE_CXX_COMPILER=g++-4.8.
Unfortunately result is exactly the same. Caffe probably overwrites it somehow - I didn't figure it out how.
make VERBOSE=1 2>&1 | grep -i compiler-bindir returns nothing.
What's interesting, make VERBOSE=1 prints command that fails, which is:
/usr/bin/nvcc -M -D__CUDACC__ /mydir/caffe/src/caffe/util/im2col.cu -o /mydir/caffe/build/src/caffe/CMakeFiles/cuda_compile.dir/util/cuda_compile_generated_im2col.cu.o.NVCC-depend -ccbin /usr/bin/cc -m64 -DUSE_LMDB -DUSE_LEVELDB -DUSE_OPENCV -DWITH_PYTHON_LAYER -DGTEST_USE_OWN_TR1_TUPLE -Xcompiler ,\"-fPIC\",\"-Wall\",\"-Wno-sign-compare\",\"-Wno-uninitialized\",\"-O3\",\"-DNDEBUG\" -gencode arch=compute_20,code=sm_21 -Xcudafe --diag_suppress=cc_clobber_ignored -Xcudafe --diag_suppress=integer_sign_change -Xcudafe --diag_suppress=useless_using_declaration -Xcudafe --diag_suppress=set_but_not_used -Xcompiler -fPIC -DNVCC -I/usr/include -I/mydir/caffe/src -I/usr/include -I/mydir/caffe/build/include -I/usr/include/hdf5/serial -I/usr/include/opencv -I/usr/include/atlas -I/usr/include/python2.7 -I/usr/lib/python2.7/dist-packages/numpy/core/include -I/mydir/caffe/include -I/mydir/caffe/build
when I add --compiler-bindir /usr/bin/gcc-4.8 flag manually, it prints error:
nvcc fatal : redefinition of argument 'compiler-bindir'
which may be related to this bug report.
Edit: I didn't notice that --compiler-bindir and -ccbin are the same options, and the latter is already set in above command that failed. When I changed -ccbin /usr/bin/cc to -ccbin /usr/bin/gcc-4.8 in above command that failed, it completes successfully. Now I need to find option in Caffe's CMake file that overwrite -ccbin in all subsequent Caffe's CMakes. Looking at cmake/Cuda.cmake:252:list(APPEND CUDA_NVCC_FLAGS ${NVCC_FLAGS_EXTRA} seems to be good way to go.
How can I successfully complete my compilation? Any help is appreciated.
Related SO questions:
host_config.h:unsupported GNU version! gcc versions later than 4.9 are not supported.
CUDA 6.5 complains about not supporting gcc 4.9 - what to do?.
cmake -D CUDA_NVCC_FLAGS="-ccbin gcc-4.8" .. && make causes successful compilation.
Now another problem showed up: linking Google's libgflags or libprotobuf fails probably due to fact that it was compiled with newer gcc version but it's not related to asked question.
My machine runs Ubuntu 15.10, and my default compiler version is gcc 5.2.1 .
Commenting out the #error directive in line 115 of file
/usr/local/cuda-7.5/include/host_config.h
(or whatever the path on your system is) did the trick for me. Caffe compiled fine, all tests ran smoothly.
On the other hand, if one chooses to ignore this and proceed to compile part of the project with one compiler version, part of the project with another (for me it was gcc-4.8 and gcc-5.2.1), linking problems will arise. The linking problems of protobuf and libgflags another answer mentions are not unrelated to this.
I want to install xgboost using anaconda python. In this process, I am trying to install xgboost. While trying to "make" the xgboost i am getting the below error:
C:\GitRepository\xgboost>
g++ -m64 -c -Wall -O3 -msse2 -Wno-unknown-pragmas -funroll-loops -fopenmp -fPIC
-o updater.o src/tree/updater.cpp
src/tree/updater.cpp:1:0: warning: -fPIC ignored for target (all code is positio
n independent)
// Copyright 2014 by Contributors
^
src/tree/updater.cpp:1:0: sorry, unimplemented: 64-bit mode not compiled in
make: *** [updater.o] Error 1
I understood from the other Stack overflow posts that 32 bit gcc cannot go with the 64bit anaconda that i am using. However when i installed mingw-w64 i could see that it has g++ only for mingw32 and not for mingw-w64. Under the mingw-w64 package, g++ and other applications+folders are present only for mingw32 and not for 64. For mingw-64 only a batch file and a internet short cut is present.
Could you please guide me what is going wrong or guide me to an appropriate place from where i can download for mingw-64.
Thanks in advance.
If you are really using MSYS2, then you should not be downloading separate compilers. You should install 64-bit g++ using MSYS2's package manager, by running pacman -S mingw-w64-x86_64-toolchain. Then make sure that you start the MSYS2 shell using the shortcut that is named something like "MSYS2 Win64 Shell" in your start menu. Type which g++ in Bash and make sure it outputs /mingw64/bin/g++. Then you should be able to compile code for 64-bit Windows.
I'm not sure that this answer is complete. If you need more help with MSYS2, it would be good to post the exact commands you are running to download/extract the source code and build so that others can reproduce the error.
Installed cygwin64, including Python 2.7, on my new computer running Windows10.
Python runs fine, adding modules like matplotlib or bitstream goes fine, but when trying to add scipy the build eventually, after about an hour, having successfully compiled lots of fortran and C/C++ files, fails with:
error: Setup script exited with error: Command "g++ -fno-strict-aliasing -ggdb -O2 -pipe -Wimplicit-function-declaration -fdebug-prefix-map=/usr/src/ports/python/python-2.7.10-1.x86_64/build=/usr/src/debug/python-2.7.10-1 -fdebug-prefix-map=/usr/src/ports/python/python-2.7.10-1.x86_64/src/Python-2.7.10=/usr/src/debug/python-2.7.10-1 -DNDEBUG -g -fwrapv -O3 -Wall -I/usr/include/python2.7 -I/usr/lib/python2.7/site-packages/numpy/core/include -Iscipy/spatial/ckdtree/src -I/usr/lib/python2.7/site-packages/numpy/core/include -I/usr/include/python2.7 -c scipy/spatial/ckdtree/src/ckdtree_query.cxx -o build/temp.cygwin-2.2.1-x86_64-2.7/scipy/spatial/ckdtree/src/ckdtree_query.o" failed with exit status 1
I've tried both pip install and easy_install, both result in the same error.
Greatful for any hints on what to try next.
I suffered for days with the same issue. My final solution was to install scipy0.15.1: pip install scipy==0.15.1. Hope it works for you too.
I found this while looking for a solution to the same problem but I could not downgrade to 0.15.1 as suggested because of 1.16 dependencies.
The problem is related to infinity having been defined twice in the official v0.16.1 but it only seems to cause issues for a couple platforms.
It was fixed in this commit. https://github.com/scipy/scipy/commit/832baa20f0b5
You should be able to download and compile the master branch from here on cygwin: https://github.com/scipy/scipy
I just finished installing numpy,scipy,scikit-learn,theano on cygwin.
Today i got the most generic compile error for Dev-C++ ever
Compiler: Default compiler
Building Makefile: "C:\projects\Makefile.win"
Executing make...
make.exe -f "C:\projects\Makefile.win" all
g++.exe -c test.cpp -o test.o -I"C:/Dev-Cpp/lib/gcc/mingw32/3.4.2/include" -I"C:/Dev-Cpp/include/c++/3.4.2/backward" -I"C:/Dev-Cpp/include/c++/3.4.2/mingw32" -I"C:/Dev-Cpp/include/c++/3.4.2" -I"C:/Dev-Cpp/include" -I"C:/SDL-1.2.15/include"
make.exe: *** [test.o] Error 255
Execution terminated
and that's it. I googled around online but usually you can see some other type of errors follow it within the compile log but no in my case. Anyone help. I am running this on window 8
Please update your IDE to the following version, which fixes an immense list of bugs, ships with GCC 4.6.1 or 4.7.0, and is fully portable: http://sourceforge.net/projects/orwelldevcpp/
That would be the number one fix to try and fix this problem regarding the automatically generated makefile. Chances are the updated version will fix your makefile problems.
You could also open up the auto generated makefile yourself and:
Go to Project >> Project Options >> Makefile and tick "use custom makefile".
Try to fix the makefile manually.
???
Rebuild.
Profit.
If this option was previously left unticked, you are sure either the old Dev-C++ made an error creating the makefile or the bundled compiler got broken for some reason.
I have cygwin installed, and I want to use Eclipse with CDT for development under Windows 7. However, I get following error:
**** Build of configuration Default for project hello_cpp ****
make all
g++ -O2 -g -Wall -fmessage-length=0 -c -o hello_cpp.o hello_cpp.cpp
process_begin: CreateProcess(C:\cygwin\bin\g++.exe, g++ -O2 -g -Wall -fmessage-length=0 -c -o hello_cpp.o hello_cpp.cpp, ...) failed.
make (e=5): Access denied.
make: *** [hello_cpp.o] Error 5
**** Build Finished ****
I'm able to use g++ as standalone compiler.
cygwin /bin folder is
added to path.
After googling I found out that C:\cygwin\bin\g++.exe is a cygwin symbolic link and Windows doesn't understand it and I need to point to the g++-3 location directly. How do I do it?
I think you've done something wrong and need to start over again. Just installed Cygwin and Eclipse CDT (Indigo) on my Windows 7 and all works fine and auto-magicaly for me.
Here's what I did and I think you need to do:
Get the latest Cygwin (yes, get it again! get rid of the old one just to be sure)
During the installation make sure to select gcc, gcc-g++ and make (I additionally installed couple of other things like gcc4, w32api but it's optional)
Start Cygwin terminal to init all configuration files, etc. See if g++ executes and close the terminal.
Add C:\cygwin\bin (or wherever else you installed it) to your Environment PATH variable
Get Eclipse CDT, extract it somewhere and start it up.
Go to File -> New Project -> C++ Project and select Hello World C++ Project. You should see the Cygwin GCC in the Toolchains list.
Create the Project, build and run it!
Done!
Build output:
**** Build of configuration Debug for project TestApp ****
make all
Building file: ../src/TestApp.cpp
Invoking: Cygwin C++ Compiler
g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"src/TestApp.d" -MT"src/TestApp.d" -o "src/TestApp.o" "../src/TestApp.cpp"
Finished building: ../src/TestApp.cpp
Building target: TestApp.exe
Invoking: Cygwin C++ Linker
g++ -o "TestApp.exe" ./src/TestApp.o
Finished building target: TestApp.exe
**** Build Finished ****
You can go to
Project Properties Page > C / C++ Build > Settings > Tool Settings
And change the command as you want. Documentation here.
Refer this link, it shows how to setup eclipse for native development with ease. everything is done in eclipse except setting environment variables.