ะก++, Embarcadero RAD Studio XE2
I need connect to a ::6100 with TIdTCPClient through http-proxy. So I wrote this code:
m_pClient = new TIdTCPClient( NULL );
m_pClient->Host = m_sServerAddress.c_str();
m_pClient->Port = StrToInt( m_sServerPort.c_str() );
m_pClient->ConnectTimeout = 5000;
m_pClient->ReadTimeout = 5000;
if ( m_bUseProxy == true )
{
m_pIdIOHandlerStack = new TIdIOHandlerStack( NULL );
m_pIdIOHandlerStack->TransparentProxy = new TIdConnectThroughHttpProxy( m_pIdIOHandlerStack );
m_pIdIOHandlerStack->TransparentProxy->Host = m_sProxyHost;
m_pIdIOHandlerStack->TransparentProxy->Port = m_iProxyPort;
m_pIdIOHandlerStack->TransparentProxy->Enabled = True;
m_pClient->IOHandler = m_pIdIOHandlerStack;
}
else
{
m_pClient->IOHandler = NULL;
}
<other code>
m_pClient->Connect();
I got an exeption "403 forbidden" on "Connect"
proxy: 5.196.0.118::3128
I can connect to this server without proxy or ping it.
I used this proxy server successfully with my browser, but I can't use it for my code.
How can I resolve this problem?
Related
My script is working so far to open a remote FTP connection, change directory, and download a file. My last two steps would be to delete the remove file once it's fully downloaded and then close the connection. ACF documentation (and cfdocs) seems to have very little information on this. Here's what I have so far:
ftpConnection = ftpService.open(
action = 'open',
connection = variables.ftpConnectionName,
server = variables.ftpServerName,
username = '***************',
password = '***************',
secure='true');
if( ftpConnection.getPrefix().succeeded ){
fileList = ftpService.listdir(directory = variables.ftpPath, connection= variables.ftpConnectionName, name='pendingFiles', stopOnError='true').getResult();
if( fileList.recordCount ){
changeFtpConnectionDir = ftpService.changeDir(
connection = variables.ftpConnectionName,
directory = variables.ftpPath);
getFtpConnection = ftpService.getFile(
connection = variables.ftpConnectionName,
remoteFile = fileList.name,
localFile = local.localPath & fileList.name,
failIfExists = false,
timeout = 3000
);
deleteRemoteFile = ftpService.remove(
connection = variables.ftpConnectionName,
remoteFile = fileList.name
};
closeFtp = ftpService.close(
connection = variables.ftpConnectionName
);
};
};
Error is thrown on the remoteFile = fileList.name. Since I already changed directory I don't think I need to put the full path here.
I put the entire script up since there doesn't seem to be many resources out there about using the newer ftpServer() functions.
D'oh - my issue was a typo:
deleteRemoteFile = ftpService.remove(
connection = variables.ftpConnectionName,
remoteFile = fileList.name
);// had } instead of )
I'll still leave this up as a resource for ftpService()
IdConnectionInterceptOpenSSL->SSLOptions->Method = sslvSSLv23;
IdConnectionInterceptOpenSSL->SSLOptions->Mode = sslmClient;
IdConnectionInterceptOpenSSL->SSLOptions->VerifyDepth = 0;
//....
TCHAR* SIR = SIRX[ix].c_str();
AnsiString rtf;
TStringStream * Send = new TStringStream(rtf) ;
Send->Write(SIR, (SIRX[ix]).Length()); // <-- new
Send->Position = 0;
TMemoryStream *Receive = new TMemoryStream() ;
AnsiString ADRESA = "https://webservicesp.anaf.ro:443/PlatitorTvaRest/api/v1/ws/tva";
IdHTTP->Request->Accept = "application/json";
IdHTTP->Request->ContentType = "application/json";
IdHTTP->Request->Connection = "Keep-Alive";
IdHTTP->Post(ADRESA, Send, Receive);
If I use a direct Internet connection, it works fine.
My problem appear when I use a proxy server for Internet connection.
I put
IdHTTP->Request->ProxyServer = PROXY_SERVER;
IdHTTP->Request->ProxyPort = StrToInt(PROXY_PORT);
if(PROXY_USER.IsEmpty() == false)
IdHTTP->Request->ProxyUsername = PROXY_USER;
if(PROXY_PASSW.IsEmpty() == false)
IdHTTP->Request->ProxyPassword = PROXY_PASSW;
But the error appears like this : connection closed gracefully to the first interrogation, and after, the same interrogation give 501 Not Implemented.
Where is the problem? Are there any solutions?
I am using soap service to authenticate request by sabre as in the document https://developer.sabre.com/docs/read/soap_basics/Authentication.
I generate the proxy classes using wsdl. i put authentication credential in the code. This is my Code for test purpose:
using ConsoleApplication1.SessionReference1;
using System;
using System.Collections.Generic;
using System.Diagnostics;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace ConsoleApplication1
{
class Program
{
[STAThread]
static void Main(string[] args)
{
try
{
// Set user information, including security credentials and the IPCC.
string username = "my-username";
string password = "my-password";
string ipcc = "not-understand";
string domain = "EXT";
string temp = Environment.GetEnvironmentVariable("tmp"); // Get temp directory
string PropsFileName = temp + "/session.properties"; // Define dir and file name
DateTime dt = DateTime.UtcNow;
string tstamp = dt.ToString("s") + "Z";
//Create the message header and provide the conversation ID.
MessageHeader msgHeader = new MessageHeader();
msgHeader.ConversationId = "TestSession"; // Set the ConversationId
From from = new From();
PartyId fromPartyId = new PartyId();
PartyId[] fromPartyIdArr = new PartyId[1];
fromPartyId.Value = "WebServiceClient";
fromPartyIdArr[0] = fromPartyId;
from.PartyId = fromPartyIdArr;
msgHeader.From = from;
To to = new To();
PartyId toPartyId = new PartyId();
PartyId[] toPartyIdArr = new PartyId[1];
toPartyId.Value = "WebServiceSupplier";
toPartyIdArr[0] = toPartyId;
to.PartyId = toPartyIdArr;
msgHeader.To = to;
//Add the value for eb:CPAId, which is the IPCC.
//Add the value for the action code of this Web service, SessionCreateRQ.
msgHeader.CPAId = ipcc;
msgHeader.Action = "SessionCreateRQ";
Service service = new Service();
service.Value = "SessionCreate";
msgHeader.Service = service;
MessageData msgData = new MessageData();
msgData.MessageId = "mid:20001209-133003-2333#clientofsabre.com1";
msgData.Timestamp = tstamp;
msgHeader.MessageData = msgData;
Security security = new Security();
SecurityUsernameToken securityUserToken = new SecurityUsernameToken();
securityUserToken.Username = username;
securityUserToken.Password = password;
securityUserToken.Organization = ipcc;
securityUserToken.Domain = domain;
security.UsernameToken = securityUserToken;
SessionCreateRQ req = new SessionCreateRQ();
SessionCreateRQPOS pos = new SessionCreateRQPOS();
SessionCreateRQPOSSource source = new SessionCreateRQPOSSource();
source.PseudoCityCode = ipcc;
pos.Source = source;
req.POS = pos;
SessionCreatePortTypeClient s = new SessionCreatePortTypeClient();
SessionCreateRS resp = s.SessionCreateRQ(ref msgHeader, ref security, req);
//SessionCreateRQService serviceObj = new SessionCreateRQService();
//serviceObj.MessageHeaderValue = msgHeader;
//serviceObj.SecurityValue = security;
//SessionCreateRS rs = new SessionCreateRS();
//SessionCreateRS = serviceObj.SessionCreateRQ(req); // Send the request
if (resp.Errors != null && resp.Errors.Error != null)
{
Console.WriteLine("Error : " + resp.Errors.Error.ErrorInfo.Message);
}
else
{
// msgHeader = serviceObj.MessageHeaderValue;
// security = serviceObj.SecurityValue;
Console.WriteLine("**********************************************");
Console.WriteLine("Response of SessionCreateRQ service");
Console.WriteLine("BinarySecurityToken returned : " + security.BinarySecurityToken);
Console.WriteLine("**********************************************");
string ConvIdLine = "convid=" + msgHeader.ConversationId; // ConversationId to a string
string TokenLine = "securitytoken=" + security.BinarySecurityToken; // BinarySecurityToken to a string
string ipccLine = "ipcc=" + ipcc; // IPCC to a string
// File.Delete(PropsFileName); // Clean up
// TextWriter tw = new StreamWriter(PropsFileName); // Create & open the file
// tw.WriteLine(DateTime.Now); // Write the date for reference
// tw.WriteLine(TokenLine); // Write the BinarySecurityToken
// tw.WriteLine(ConvIdLine); // Write the ConversationId
// tw.WriteLine(ipccLine); // Write the IPCC
// tw.Close();
//Console.Read();
}
}
catch (Exception e)
{
Console.WriteLine("Exception Message : " + e.Message);
Console.WriteLine("Exception Stack Trace : " + e.StackTrace);
Console.Read();
}
}
}
}
Please Help me
I didn't check the sequence of the code in detail, but checking the values you set for organization and domain:
string ipcc = "not-understand";
string domain = "EXT";
Unless you did it intentionally to mask the values, you should have received your ipcc value from Sabre after getting a SOAP webservices account.
The value for SOAP APIs domain is normally "DEFAULT".
Registering on dev studio only gives you REST test credentials (not SOAP), so you can use this form to request SOAP test credentials:
https://developer.sabre.com/contact
Finally, I don't quite see the environment/target url you're using to test the SessionCreate service...CERT one is: https://sws3-crt.cert.sabre.com/
I'm trying to write an application that would work with the EWS proxy classes. To generate proxy classes I used gsoap (compiled OpenSSL).
I have implemented a library that works with EWS, but. Net.
The problem is this: I have no idea how to implement a connection to the server.
Doing the following:
ExchangeServiceBindingProxy *proxy = new ExchangeServiceBindingProxy("https://192.168.0.49/EWS/exchange.asmx");
soap *pSoap = proxy->soap;
pSoap->userid = "user1";
pSoap->passwd = "password1";
pSoap->recv_timeout = 300;
pSoap->send_timeout = 300;
SOAP_ENV__Header *header = new SOAP_ENV__Header();
header->ns3__RequestServerVersion = new _ns3__RequestServerVersion();
header->ns3__RequestServerVersion->soap = pSoap;
header->ns3__RequestServerVersion->Version = ns3__ExchangeVersionType__Exchange2010;
pSoap->header = header;
//get root folder ID
ns3__DistinguishedFolderIdType *dfit = new ns3__DistinguishedFolderIdType();
dfit->Id = ns3__DistinguishedFolderIdNameType__inbox;
//set the props that we want to retrieve
ns3__FolderResponseShapeType *frst = new ns3__FolderResponseShapeType();
frst->BaseShape = ns3__DefaultShapeNamesType__AllProperties;
//get folder
ns1__GetFolderType *gftRoot = new ns1__GetFolderType();
gftRoot->FolderIds = new ns3__NonEmptyArrayOfBaseFolderIdsType();
gftRoot->FolderIds->__union_NonEmptyArrayOfBaseFolderIdsType = new __ns3__union_NonEmptyArrayOfBaseFolderIdsType();
gftRoot->FolderIds->__union_NonEmptyArrayOfBaseFolderIdsType->union_NonEmptyArrayOfBaseFolderIdsType.DistinguishedFolderId = dfit;
gftRoot->FolderShape = frst;
__ns1__GetFolderResponse response;
int error = proxy->GetFolder(gftRoot, response);
As a result, getting the error: SLL_ERROR.
I know, that i`m doing something wrong. But what? What i should to do, to use proxy classes functions?
I resolved it by myself:
Added to project LibNTLM and added to preprocessor WITH_NTLM.
Also changed code, a little bit:
ExchangeServiceBindingProxy *proxy = new ExchangeServiceBindingProxy(endpoint.c_str());
soap *pSoap = proxy->soap;
pSoap->userid = "Ivan1";
pSoap->passwd = "1";
pSoap->ntlm_challenge = "";
pSoap->authrealm = "Ursa-Minor";
pSoap->ssl_flags = SOAP_SSL_NO_AUTHENTICATION;
//pSoap->keep_alive = true;
pSoap->mode = SOAP_IO_KEEPALIVE;
//get root folder ID
ns3__DistinguishedFolderIdType *dfit = new ns3__DistinguishedFolderIdType();
dfit->Id = ns3__DistinguishedFolderIdNameType__inbox;
//set the props that we want to retrieve
ns3__FolderResponseShapeType *frst = new ns3__FolderResponseShapeType();
frst->BaseShape = ns3__DefaultShapeNamesType__AllProperties;
//get folder
ns1__GetFolderType *gftRoot = new ns1__GetFolderType();
gftRoot->FolderIds = new ns3__NonEmptyArrayOfBaseFolderIdsType();
gftRoot->FolderIds->__size_NonEmptyArrayOfBaseFolderIdsType = 1;
gftRoot->FolderIds->__union_NonEmptyArrayOfBaseFolderIdsType = new __ns3__union_NonEmptyArrayOfBaseFolderIdsType();
gftRoot->FolderIds->__union_NonEmptyArrayOfBaseFolderIdsType->union_NonEmptyArrayOfBaseFolderIdsType.DistinguishedFolderId = dfit;
gftRoot->FolderIds = (ns3__NonEmptyArrayOfBaseFolderIdsType*)dfit;
gftRoot->FolderShape = frst;
__ns1__GetFolderResponse response;
int qq = proxy->GetFolder(gftRoot, response);
return true;
But now i have enother problems: Error 500: Internal Server Error
I am trying to send push notification in blackberry by using C# Web
service but i am facing problem is it return exception "The remote
server returned an error: (404) Not Found.". all info is correct as
per RIM Standard so please Help me ASAP.
[WebMethod]
public bool push(string notification)
{
bool success = true;
byte[] bytes = Encoding.ASCII.GetBytes("Hello");
Stream requestStream = null;
HttpWebResponse HttpWRes = null;
HttpWebRequest HttpWReq = null;
String BESName = "cp****.pushapi.eval.blackberry.com";
try
{
//http://<BESName>:<BESPort>/push?DESTINATTION=<PIN/EMAIL>&PORT=<PushPort>&REQUESTURI=/
// Build the URL to define our connection to the BES.
string httpURL = "https://" + BESName + "/push?DESTINATION=2B838E45&PORT=32721&REQUESTURI=/";
//make the connection
HttpWReq = (HttpWebRequest)WebRequest.Create(httpURL);
HttpWReq.Method = ("POST");
//add the headers nessecary for the push
HttpWReq.ContentType = "text/plain";
HttpWReq.ContentLength = bytes.Length;
// ******* Test this *******
HttpWReq.Headers.Add("X-Rim-Push-Id", "2B838E45" + "~" + DateTime.Now); //"~" +pushedMessage +
HttpWReq.Headers.Add("X-Rim-Push-Reliability", "application-preferred");
HttpWReq.Headers.Add("X-Rim-Push-NotifyURL", ("http://" + BESName + "2B838E45~Hello~" + DateTime.Now).Replace(" ", ""));
// *************************
HttpWReq.Credentials = new NetworkCredential("Username", "Password");
requestStream = HttpWReq.GetRequestStream();
//Write the data from the source
requestStream.Write(bytes, 0, bytes.Length);
//get the response
HttpWRes = (HttpWebResponse)HttpWReq.GetResponse();
var pushStatus = HttpWRes.Headers["X-RIM-Push-Status"];
//if the MDS received the push parameters correctly it will either respond with okay or accepted
if (HttpWRes.StatusCode == HttpStatusCode.OK || HttpWRes.StatusCode == HttpStatusCode.Accepted)
{
success = true;
}
else
{
success = false;
}
//Close the streams
HttpWRes.Close();
requestStream.Close();
}
catch (System.Exception)
{
success = false;
}
return success;
}
I got the same error when I tried your code above. Replace
String BESName = "cp****.pushapi.eval.blackberry.com";
With
String BESName = "cpxxx.pushapi.eval.blackberry.com/mss/PD_pushRequest";
and make sure you provide the right username and password here:
HttpWReq.Credentials = new NetworkCredential("username", "password");
I got success = true;
However, even though the above code executed successfully, I still do not see the push message on the BlackBerry device.