I'm trying to display text in my CListCtrl for the last several hours with no success.
I'm using std::ifstream to read from .txt file that uses utf-8 to populate the CListCtrl.
"Project properties->Character" set is "not set" and I can't change it to use Unicode, this is an old project originally not written by me.
Also conversion from UTF-8 to ANSI doesn't work, and I can't use boost libraries.
As I read the CListCtrl doesn't support UTF-8.
I will be glad to hear any solution that might work, Extended CListCtrl to replace the old one etc.. I am using VS2010, .NET4.
You need to use the Unicode version of list view APIs (e.g. LVM_SETITEMW). The MBCS version of MFC calls the ANSI versions of Windows APIs which may not be able to display some Unicode characters in your file.
This means you need to send a LVM_SETITEMW message with a LVITEMW structure if you want to change an item, for example. If you have many list controls to change, you can probably write a CListCtrlW class using MFC's code as reference. LVITEMW expects strings to be UTF-16, so you need to convert the string data to UTF-16. You can do this via MultiByteToWideChar or CA2W with the CP_UTF8 code page. Also if you are using a font that cannot handle some Unicode characters from your input, you need to change the font.
If a lot of places in the UI are required to handle Unicode input, you can try move the ANSI part of the business logic out to a DLL then change your main exe project to Unicode.
Related
I have an array of approximately 400 UTF-8 bytes. How can I display the corresponding text? It almost certainly contains several emojis, along with ASCII.
Platform is Windows with Visual C++, but I can switch to macOS or Linux if necessary. Happy to use a 3rd party library too.
Clarification: It's a console application, so I'd like to display the result in a console. I can use Windows Terminal instead. Looks like MultiByteToWideChar is what I need.
We have an MFC Windows Application, written originally in VC++ 6 and over the years updated for newer IDE, currently developed in VS2017.
The application is built with MBCS (not unicode). Trying to switch to Unicode causes 3806 compile errors, and that is probably just a tip of an iceberg.
However we want to be able to run the application with different code page, ie. 1250 (Central European).
I tried to build a small test application, and managed to get it to work with special characters (čćšđž). I did this by setting dialog font to Microsoft Sans Serif with code page 1250.
The same approach in our application does not work. Note: dialogs in our application are created dynamically, and font is set using SetFont.
There is a difference how the special characters are treated in these two applications.
In test application, the special characters are displayed in the edit control, and GetWindowsText retrieves the right bytes. However, trying to write some characters from other languages, renders them as "????".
In our application, all special characters are rendered properly, but GetWindowText (or WM_GETTEXT) convert the special characters to the similar ascii counterpart (čćđ -> ccd).
I believe that Edit control in our application displays Unicode text, but GetWindowText converts it to ascii.
Does anyone have any idea what is happening here, and how I might solve it?
Note: I know how to convert project to Unicode. We are choosing not to commit resources to it at the moment, as it would probably take weeks or months to implement. The question is how I might get it to work with MBSC and why is edit control converting Č to C.
I believe it is absolutely possible to port the application to other languages/codepages, you only need to modify the .rc (resource) files, basically having one resource file for each language, which you may rather want to do anyway, as strings in menus and/or string-tables would be in a different language. And this is actually the only change needed, as far as the application part is concerned.
The other part is the system you are running it on. A window can be unicode or non-unicode. You can see this with the Spyxx utility, it tells you whether a window (procedure) is unicode or not (Window properties, General tab). And while unicode windows do work properly, non-unicode ones have to change encoding from/to unicode and mbcs when getting or setting the text. The conversion is based on the system (default) code-page. This can only be set globally (for the whole machine), and not per application or window. And of course, setting the font's codepage is not enough (and imo it's not needed at all, if you are runnign the application on a machine with the "correct" codepage). That is, for non-unicode applications, only one codepage will be working properly, the others won't.
I can see two options:
If you only need to update a small number of controls, it may be possible to change only these controls to unicode, and use the "wide" versions of the get/set window-test functions or messages - you will have to convert the text between unicode and your desired codepage. It requires writing some code, but has the advantage of the conversion being independent from the system default codepage, eg you can have the codepage in some configuration file, in the registry, or as a command-line option (in the application's shortcut). Some control types can be changed to unicode, some others not, so pls check the documentation. Used this technique successfully for a mbcs application displaying/editing translated strings in many different languages, but I only had one control, a List-View, which btw offers the LVM_SETUNICODEFORMAT message, thus allowing for unicode texts, even in a mbcs application.
The easiest method is simply run the application as is, but it will only be working on machines with the proper default codepage, as most non-unicode applications do.
The system default codepage can be changed by setting the "Language for non-Unicode programs" option, available in the regional settings, Administrative tab, and requires a reboot. Changing the Windows UI language will change this option as well, but by setting this option you don't need to change the UI language, eg you can have English UI and East-European codepage.
See a very similar post here.
Late to the party:
In our application, all special characters are rendered properly, but GetWindowText (or WM_GETTEXT) convert the special characters to the similar ascii counterpart (čćđ -> ccd).
That sounds like the ES_OEMCONVERT flag has been set for the control:
Converts text entered in the edit control. The text is converted from the Windows character set to the OEM character set and then back to the Windows character set. This ensures proper character conversion when the application calls the CharToOem function to convert a Windows string in the edit control to OEM characters. This style is most useful for edit controls that contain file names that will be used on file systems that do not support Unicode.
To change this style after the control has been created, use SetWindowLong.
I'm developing an application in MinGW/C++ that uses Windows' common dialogs. The need has arisen to collect a file name that might have non-ASCII characters in it. Is there a flag or another option for retrieving a file name in Unicode, or preferably UTF-8?
Call GetOpenFileNameW. You can do this without converting your entire app to Unicode which may be the most expedient solution.
Windows API comes in 2 flavours, ANSI and Unicode. The former has functions with an A suffix. The latter have a W suffix. You are currently using the former.
I am building an MFC C++ application with "Use Unicode Character Set" selected in Visual Studio. I have UNICODE defined, my CStrings are 16-bit, I handle filenames with Japanese characters in them, etc. But, when I put Unicode strings containing Japanese characters in a CComboBox (using AddString), they show up as ?????.
I'm running Windows XP Professional x64 (in English). If I use Windows Control Panel Regional and Language Options, Advanced Tab, and set the Language for non-Unicode programs to Japanese, my combo box looks right.
So, I want my combo box to look right, and I want to understand why the "Language for non-Unicode programs" setting is changing the behavior of my Unicode program. Is there something else I should do to tell Windows my application is a Unicode application?
Thanks for any help!
Windows knows the difference between Unicode and non-Unicode programs by the functions they call. Most Windows API functions will come in two variants, one ending in A for non-Unicode and one ending in W for Unicode. The include files that define these functions will use the compiler settings to pick one or the other for you automatically.
The characters might not be coming out properly because you've selected a font that doesn't include them to be your default UI font.
Where do you get the strings from?
If they are hard-coded in your C sources, then at the time you call AddString they are (most likely) already damaged.
Nothing prevents one from taking some Unicode string, "squeeze" it in a std::string, for instance, and damage it. Even if the applications is compiled as Unicode.
I am using VC 9 and I want to support Russian language for my application. I even created Russian resource strings. But my system has Russian Language setting. If it is not there every character displays junk (its code page is 1251). I also made DLL from Russian resource file. If I run that DLL in application from installed location, it works fine.
But when I change computer setting to English and run that DLL from appilcation, dialog and message box shows junk character. But shouldn't application read from DLL, not from computer language setting? Here I am facing problem how to make a language independent DLL. Any code or setting for this?
By far the easiest solution is to stick to Unicode.
Windows is Unicode internally. (Almost) Every API function exists in two variants, FooA and FooW. THe FooA variant converts char's to wchar_t's before calling FooW. The exact conversion is defined by the code page.
Now, if you use Unicode, there is no such conversion, and no code page. If the user enters ж (U+0436, it is stored as wchar_t(0x0436) and never converted. If your resource contains ж in Unicode, it too is not converted.
If the strings you want to display cannot be represented in the system code page, the only solution is Unicode.