I'm trying to run the Microsoft Keyboard Layout Creator to create dll files for the Bépo keyboard.
In the bin directory is the kbdutool.exe which I'm meant to run at the command line (pictured)
The .c and .h files are generated as a preliminary step before I modify them and compile a dll from these sources. I can't complete the compilation though. The output is:
KbdTool v3.40 - convert keyboard text file to C file or a keyboard layout DLL
Compiling layout information from 'bepo.klc' for wow64.
bepo.H : can't open for write.
bepo.C : can't open for write.
bepo.c
c1 : fatal error C1083: Cannot open source file: 'bepo.c': No such file or directory
CL:EXE returned 2
Microsoft (R) Windows (R) Resource Compiler Version 6.0.5724.0
Copyright (C) Microsoft Corporation. All rights reserved.
fatal error RC1110: could not open bepo.rc
RC.EXE returned 1
LINK : fatal error LNK1181: cannot open input file 'bepo.res'
LINK.EXE returned 1181
2
The warnings about not being able to open the files for writing are expected, I was following a guide here (in French).
I added this folder to the system path, so I'm not sure what the problem is. If it's of any relevance, cl.exe reports itself to be a 32-bit C/C++ compiler for 80x86. I am using Windows 7 x64. The keyboard tool supports building DLLs for 64-bit targets. It doesn't matter if I change the case of bepo.C to bepo.c, the same problems occur. You can see I moved the folder from its installation location, suspicious that it might have something to do with spaces in the path. I have all aspects of .NET 3.5 enabled.
Related
I'm working with Houdini HDK (API), when I include
#include<OP/OP_OperatorTable.h> or some other preprocessor i get the error message
the visual studio gives me this error, C++ cannot open source file "hboost/predef/os/cygwin.h
the full error message is: Severity Code Description Project File Line Suppression State
Error (active) E1696 cannot open source file "hboost/predef/os/cygwin.h" NodeCreation C:\Program Files\Side Effects Software\Houdini 17.5.467\toolkit\include\hboost\predef\os.h
After I see this message for the first time I thought I should install Cygwin for windows, and I install the Cygwin but I get the error again
there's no cygwin.h file in this path, visual studio is searching for this file in this path
what's the problem and what should I do?
If you dont have cygwin.h that means you miss something when you install the Houdini API. I try a FULL installation by checking ALL the buttons below:
At the end, you will have this in your installation folder :
I am unable to tell you which one is responsible for installing "cygwin.h" but that should solve your problem.
I'm trying to deploy my Django website, which is written using Python 2.7, on a windows 64 bit machine (Windows Server 2008 R2). I installed the pre-compiled version of Apache (Apache 2.4.16 x64) from https://www.apachehaus.com/cgi-bin/download.plx (due to lack of option provided by Apache Lounge***), and have checked that Python 2.7 runs on 64 bit and compiles with VC9. I wasn't able to find a pre-built binary for mod_wsgi (for Windows 64 bit and compiled with VC9), so I downloaded the source code for mod_wsgi from https://github.com/GrahamDumpleton/mod_wsgi/releases/tag/4.4.13 and followed the direction from https://github.com/GrahamDumpleton/mod_wsgi/blob/develop/win32/README.rst, changing the ap24py27-win64-VC9.mk file to point at the right directories for APACHE_ROOTDIR and PYTHON_ROOTDIR, and using C++ 2008 64-bit Command Prompt to run the command nmake -f ap24py27-win64-VC9.mk clean. However, this gave me the error:
wsgi_memory.obj : error LNK2019: unresolved external symbol GetProcessMemoryInfo referenced
in function getPeakRSS
mod_wsgi.so : fatal error LINK1120: 1 unresolved externals
NMAKE : fatal error U1077: `"...\Visual C++ for Python\9.0\VC\Bin\amd64\c1.EXE"` :
return code `0x2`
Stop.
I have read the installation and configuration documents for mod_wsgi multiple times and have searched the web including SO for the past few hours to no avail. What am I doing wrong here and how could I fix it?
***I know the official document for installing mod_wsgi warns against using binaries from other sources than Apache Lounge but I don't seem to be able to find the right compiled version (for VC9 and Windows 64 bit) from the site. Could this be a problem and if so, how could I fix it?
Update: following Adelin's suggestion, I was able to get namke -f ap24py27-win64-VC9.mk clean to run. However, when I try running namke -f ap24py27-win64-VC9.mk or namke -f ap24py27-win64-VC9.mk install, I get pages of warnings that say: warning C4820: '...' : '...' bytes padding added after data member '...' until the compiler quits with
fatal error C1083: Cannot open include file: 'Python.h': No such file or directory
...\mod_wsgi-4.4.13\src\server\wsgi_memory.c<124> : warning C4711: function 'getCurrentRSS' selected for automatic inline expansion
NMAKE: fatal error U1077: '"C:\...\Microsoft\Visual C++ for Python\9.0\VC\Bin\amd64\c1.EXE"' : return code '0x2'
Stop.
Does anyone have any idea why this might be and how I should go about fixing it?
I had this same error.
The problem is that the cl.exe doesn't find the psapi.lib. This lib includes the function referenced in wsgi_memory.c - GetProcessMemoryInfo.
To fix this, you should follow these steps:
Locate psapi.lib (run a search on C:\)
Open the ap24py27-win64-VC9.mk file you are using to compile, with
any text editor
See what other .mk file it includes. Most probably common-VC9.mk
Open that file (common-VC9.mk) with any text editor
Under LDFLAGS, append yet another line of /LIBPATH:"PATH_FOUND_AT_STEP_1"\
Save changes and retry
What a pain in the ass this was for me too :)
P.S. If you don't find psapi.lib anywhere, it's because you don't have the Windows SDK. I installed both Windows 7 and Windows 8 SDKs and eventually had the psapi.lib located here C:\Program Files (x86)\Windows Kits\8.1\Lib\winv6.3\um\x64
Edit:
To give you a solution for your newest errors in a somewhat general way, whenever nmake throws "No such file" errors, the location for the file is not properly referenced in common-VC9.mk file.
There are two types of files nmake will look for: .h or .lib.
If a .h is not found, the corresponding path should be properly referenced under the CPPFLAGS variable of common-VC9.mk file.
If a .lib is not found, you need to update LDFLAGS path accordingly.
How? The same way you included the path for psapi.lib: locate the file and append the corresponding path to the proper variable: CPPFLAGS or LDFLAGS.
I would appreciate if i can get some help in solving this issue for which i have been looking for information for over 2 days through various forums. Crying or Very sad Crying or Very sad
I have installed Infosphere Datastage v8.5 on windows environment for testing and have run a couple of jobs, but when i run a job containing a transformer i get compilation error.
Job: Row generator -> Tfx -> Sequential File
Based on my search through various forums i find that Similar issue has been faced by others as well.But i am unable to find a concrete answer regarding the following:
1. A Compiler that i need to install and the related SDK that needs to be installed along with it
2. or A combined pack that has both compiler+SDK
The Installation Guide talks about Microsoft Visual Studio .NET 2008 Express Edition C++: but does not mention which is the associated SDK that needs to be installed ?
or is there a newer version of C++ compiler+SDK that will work on my environment
My Environment Details:
OS - Windows Server 2008 R2(Standard) SP1 - 64 bit
IIS - Infosphere Information Server v8.5 64bit Multilingual
--================
.Net framework
--================
Microsoft .Net framework 1.1
Microsoft .Net framework 4 Client Profile
Microsoft .Net framework 4 Extended
--=====
SDK
--=====
Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
This SDK created 2 directories path , which are as follows:
C:\Program Files\Microsoft SDKs
C:\Program Files (x86)\Microsoft Visual Studio 9.0
Windows Environment Variables:
INCLUDE - C:\IBM\SQLLIB\INCLUDE;C:\IBM\SQLLIB\LIB;C:\Program Files\Microsoft SDKs\Windows\v7.0\Include
LIB - C:\Program Files\Microsoft SDKs\Windows\v7.0\Lib;C:\IBM\SQLLIB\LIB
CLASSPATH - .;C:\IBM\SQLLIB\java\db2java.zip;C:\IBM\SQLLIB\java\db2jcc.jar;C:\IBM\SQLLIB\java\sqlj.zip;
C:\IBM\SQLLIB\java\db2jcc_license_cu.jar;C:\IBM\SQLLIB\bin;C:\IBM\SQLLIB\java\common.jar
Path - C:\IBM\InformationServer\Server\DSComponents\bin;C:\Program Files (x86)\MKS Toolkit\mksnt;C:\PROGRA~2\MKSTOO~1\bin64;C:\PROGRA~2\MKSTOO~1\bin;
C:\PROGRA~2\MKSTOO~1\bin\X11;C:\PROGRA~2\MKSTOO~1\mksnt;C:\IBM\InformationServer\ASBNode\apps\jre\bin\classic;C:\IBM\InformationServer\ASBNode\lib\cpp;
C:\IBM\InformationServer\ASBNode\apps\proxy\cpp\vc60\MT_dll\bin;%systemroot%\system32;%systemroot%;
%systemroot%\system32\wbem;%systemroot%\system32\windowspowershell\v1.0\;c:\program files (x86)\microsoft visual studio 9.0\vc\bin;
c:\program files (x86)\microsoft visual studio 9.0\common7\ide;c:\program files\ibm\gsk8\lib64;C:\IBM\SQLLIB\BIN;C:\IBM\SQLLIB\FUNCTION;
C:\IBM\SQLLIB\SAMPLES\REPL;C:\Windows/SysWOW64
Compiler information from windows command prompt:
c:\Users\skh>cl.exe
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 15.00.30729.01 for 80x86
Copyright (C) Microsoft Corporation. All rights reserved.
usage: cl [ option... ] filename... [ /link linkoption... ]
Datastage Environment Variables:
APT_COMPILEOPT (old): -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c -W/Zc:wchar_t-
APT_COMPILEOPT (new): -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c
APT_LINKOPT(old): -s -W/dll -W/base:0x50000000 -W/Zc:wchar_t-
APT_LINKOPT(new): -s -W/dll -W/base:0x50000000
The (old) represent the default values that DS Environment variables had. I ran my job which had a transformer but i got the compilation error.
I changed the Environment variable values to what is stated in (new), still i get the compilation error mentioned below
Output from transformer compilation follows:
I IIS-DSEE-TFCN-00001 12:55:36(000)
IBM WebSphere DataStage Enterprise Edition 8.5.0.5746
Copyright (c) 2001, 2005-2008 IBM Corporation. All rights reserved
##I IIS-DSEE-TFCN-00006 12:55:36(001) <main_program> conductor uname: -s=Windows_NT; -r=1; -v=6; -n=IN-MUM-IBMQLT; -m=Pentium
##I IIS-DSEE-TOSH-00002 12:55:36(002) <main_program> orchgeneral: loaded
##I IIS-DSEE-TOSH-00002 12:55:36(003) <main_program> orchsort: loaded
##I IIS-DSEE-TOSH-00002 12:55:36(004) <main_program> orchstats: loaded
##W IIS-DSEE-TOSH-00049 12:55:36(007) <main_program> Parameter specified but not used in flow: DSPXWorkingDir
##E IIS-DSEE-TBLD-00076 12:55:39(000) <main_program> Error when checking composite operator: Subprocess command failed with exit status 256.
##E IIS-DSEE-TFSR-00019 12:55:39(001) <main_program> Could not check all operators because of previous error(s)
##W IIS-DSEE-TFTM-00012 12:55:39(002) <transform> Error when checking composite operator: The number of reject datasets "0" is less than the number of input datasets "1".
##I IIS-DSEE-TBLD-00000 12:55:39(003) <main_program> Error when checking composite operator: Output from subprocess: cl : Command line warning D9035 : option 'GX' has been deprecated and will be removed in a future release
cl : Command line warning D9036 : use 'EHsc' instead of 'GX'
cl : Command line warning D9025 : overriding '/GX' with '/EHa'
##I IIS-DSEE-TBLD-00000 12:55:39(004) <main_program> Error when checking composite operator: Output from subprocess: C:\IBM\InformationServer\Server\PXEngine\include\apt_util/ints.h(83) : fatal error C1083: Cannot open include file: 'strstream': No such file or directory
##W IIS-DSEE-TFEV-00025 12:55:39(005) <transform> Error when checking composite operator: Converting string to number.
##W IIS-DSEE-TFEV-00023 12:55:39(006) <transform> Error when checking composite operator: Implicit conversion from source type "String" to result type "DFloat".
##W IIS-DSEE-TFEV-00025 12:55:39(007) <transform> Error when checking composite operator: Converting number to string.
##W IIS-DSEE-TFEV-00023 12:55:39(008) <transform> Error when checking composite operator: Implicit conversion from source type "DFloat" to result type "String".
##W IIS-DSEE-TBLD-00000 12:55:39(009) <main_program> Error when checking composite operator: Output from subprocess: ld: script execution error in file 'C:/PROGRA~2/MKSTOO~1/etc/nutccg/ld.ccg' on line 1119
>>> execv: could not run 'link32': The system cannot find the file specified.
##I IIS-DSEE-TBLD-00079 12:55:39(010) <transform> Error when checking composite operator: cxx -LC:/IBM/InformationServer/Server/Projects/PRJ_QSPOC/RT_BP2.O/ -LC:/IBM/InformationServer/Server/PXEngine/lib -LC:/IBM/InformationServer/Server/PXEngine/user_lib -s -W/dll -W/base:0x50000000 -lliborchnt -lliborchcorent -lliborchbuildopnt C:/IBM/InformationServer/Server/Projects/PRJ_QSPOC/RT_BP2.O/V0S3_TestJob_Tfx_Transformer.tmp.o -o C:/IBM/InformationServer/Server/Projects/PRJ_QSPOC/RT_BP2.O/V0S3_TestJob_Tfx_Transformer.dll.
##E IIS-DSEE-TCOS-00029 12:55:39(011) <main_program> Creation of a step finished with status = FAILED. (TestJob_Tfx.Transformer)
*** Internal Generated Transformer Code follows:
0001: //
0002: // Generated file to implement the V0S3_TestJob_Tfx_Transformer transform operator.
0003: //
0004:
0005: // define our input/output link names
0006: inputname 0 DSLink2;
0007: outputname 0 DSLink5;
0008:
0009: initialize {
0010: // define our control variables
0011: int8 RowRejected0;
0012: int8 NullSetVar0;
0013:
0014: }
0015:
0016: mainloop {
0017:
0018: // declare our intermediate variables for this section
0019: dfloat InterVar0_0;
0020:
0021: // initialise the rejected row variable
0022: RowRejected0 = 1;
0023:
0024: // evaluate columns (no constraints) for link: DSLink5
0025: InterVar0_0 = DSLink2.Dummy1;
0026: DSLink5.Dummy1 = (InterVar0_0 + 5);
0027: writerecord 0;
0028: RowRejected0 = 0;
0029: }
0030:
0031: finish {
0032: }
0033:
*** End of Internal Generated Transformer Code
This is how i went about fixing it. I hope this helps people facing similar problems and saves some time and effort.
so , here it goes :
I installed Visual Studio C++ 2008 Express Edition.
I then worked around vcvarsall.bat file .if you are wondering why , please check
(
http://msdn.microsoft.com/en-us/library/x4d2c09s(v=vs.80).aspx )
and
Errors while building/installing C module for Python 2.7
)
I executed the following from the cmd window, to set the 64 bit compiler:
vcvarsall.bat amd64
NOTE: my environment has a X64 AMD chipset windows server;I used echo %PROCESSOR_ARCHITECTURE% , from cmd window to determine this.
To cross check which compiler is set, execute the following and the output would indicate.
cl.exe
Next , set the following windows system variables:
INCLUDE - C:\IBM\SQLLIB\INCLUDE;C:\IBM\SQLLIB\LIB; C:\Program Files\Microsoft SDKs\Windows\v6.0A\Include
LIB - C:\Program Files\Microsoft SDKs\Windows\v6.0A\Lib ;C:\IBM\SQLLIB\LIB
Note:-
The folder path C:\Program Files\Microsoft SDKs\Windows\v6.0A is created by the Visual Studio C++ 2008 Express Edition. This should be the source for folder paths that are set for INCLUDE & LIB
There is a similar path that the SDK creates C:\Program Files\Microsoft SDKs\Windows\v7.0\ , but Include and Lib folder from this path should not be used to set the above mentioned Windows Environment variables , I made this mistake during my set up :(
for reference please check the Release Note of the SDK that is to be installed.
Set the following Datastage ENV variable,from the Administrator, to values below.
APT_COMPILEOPT : -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c -W/Zc:wchar_t-
APT_LINKOPT : -s -W/dll -W/base:0x50000000 -W/Zc:wchar_t-
I then restarted the Datastage services.
.. and the transformers started to work :)
PS : I did not uninstall Information Server nor the SDK (which i initially presumed was the problem)
I'm creating a kinect project in Visual Studio 2008 using OpenNi, NITE and OpenGL.
At random times dureing development I get the following error:
Error result 1 returned from 'C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin\rc.exe'.
I've searched the internet with no luck.
I am able to create a new project and copy all my code across and it works fine but this is not something I want to be doing multiple times each day.
If any more info is required I'd be happy to give it.
EDIT full output window reads
1>------ Build started: Project: PointViewer, Configuration: Debug Win32 ------
1>Compiling resources...
1>Microsoft (R) Windows (R) Resource Compiler Version 6.0.5724.0
1>Copyright (C) Microsoft Corporation. All rights reserved.
1>fatal error RC1110: could not open ..\Res\NITE.rc
1>Project : error PRJ0002 : Error result 1 returned from 'C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin\rc.exe'.
1>Build log was saved at "file://d:\Documents\Uni work\Year 4\Personal Project\Samples \PointViewer\Debug\BuildLog.htm"
1>PointViewer - 1 error(s), 0 warning(s)
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
You are referencing your RC file via a relative path (..).
It seems likely your current directory is changing, and hence .., and the path to your RC file changes, causing the error.
You will have to make sure that your RC file is referred to in a way that doesn't change.
Try removing it from the project, and re-adding it, taking care to refer to it only in absolute terms.
Check your project and build settings for the directory where the build is to start, and how the filename is preserved in the project settings. You're looking for something like "Persist Filenames As...".
I had the same error. Move your entire project folder into documents/visualstudio/projects. If that doesn't work, move it to your desktop. It is just a linking problem, it can't find the resources. Make sure you aren't moving your folders around as this can cause these issues.
A possible reason for the error described - .rc file was renamed.
Check the .rc file name in your .vcproj file and see that it actually exists on disk.
Edit 2 -
I don't have the application file qmake in the /bin folder and this is the error I am getting.
Path environment variable : C:\development\referencebuilds\qt\4.7.4\qt-everywhere-opensource-src-4.7.4\bin\
Command Prompt - visual studio 2005
Source folder - C:\development\referencebuilds\qt\4.7.4\qt-everywhere-opensource-src-4.7.4
Steps -
Downloaded src
Extracted the files to folder – qt-everywhere-opensource-src-4.7.4(C:\development\referencebuilds\qt\4.7.4)
configure.exe -opensource -fast -no-accessibility -no-qt3support -no-multimedia -no-audio-backend -no-phonon -no-phonon-backend -no-webkit -no-scripttools -platform win32-msvc2005 -D “_BIND_TO_CURRENT_VCLIBS_VERSION=1”
4.nmake
The error I get is
Microsoft (R) Program Maintenance Utility Version 8.00.50727.762
Copyright (C) Microsoft Corporation. All rights reserved.
C:\development\referencebuilds\qt\4.7.4\qt-everywhere-opensource-src-4.7
.4\bin\qmake C:/development/referencebuilds/qt/4.7.4/qt-everywhere-opensource-sr
c-4.7.4/\projects.pro -o Makefile -spec win32-msvc2005
'C:\development\referencebuilds\qt\4.7.4\qt-everywhere-opensource-src-4.7.4\bin\
qmake' is not recognized as an internal or external command,
operable program or batch file.
NMAKE : fatal error U1077: 'C:\development\referencebuilds\qt\4.7.4\qt-everywher
e-opensource-src-4.7.4\bin\qmake' : return code '0x1'
Stop.
I know I dont have the app files for qmake and many other appfiles in my \bin folder. How do I get them?
Edit 1
Well, after trying out all the answers, the situation still remains the same. I think i should add more details to what I am doing.
I am copying bin files(.dll , Appplication, Application Extension, Incremental Linker File, Program Debug Database, ) from another machine and the version of Qt was 4.7.2
My questions are -
1. Do you see that as the cause for all the issues here? If yes, how do I get all the above files? If I just congigure as above and then run nmake I get
Microsoft (R) Program Maintenance Utility Version 8.00.50727.762
Copyright (C) Microsoft Corporation. All rights reserved.
C:\development\referencebuilds\qt\4.7.4\bin\qmake
C:/development/referen cebuilds/qt/4.7.4/\projects.pro -o Makefile
-spec win32-msvc2008
'C:\development\referencebuilds\qt\4.7.4\bin\qmake' is not recognized
as an inte rnal or external command, operable program or batch file.
NMAKE : fatal error U1077:
'C:\development\referencebuilds\qt\4.7.4\bin\qmake' : return code
'0x1' Stop.
1, Downloaded the source file named
qt-everywhere-opensource-4.7.4 and saved it in folder c:\development\referencebuilds\qt\4.7.4\
2, uncompressed the zip file and the files extracted into folder
c:\development\referencebuilds\qt\4.7.4\qt-everywhere-opensource-4.7.4
3, Copied back all files from the folder
c:\development\referencebuilds\qt\4.7.4\qt-everywhere-opensource-4.7.4 to c:\development\referencebuilds\qt\4.7.4\
4, ran
configure.exe -opensource -fast -no-acce ssibility -no-qt3support
-no-multimedia -no-audio-backend -no-phonon -no-phonon- backend
-no-webkit -no-scripttools -platform win32-msvc2008 -D
"_BIND_TO_CURRENT
_VCLIBS_VERSION=1"
5, nmake and now I get the following errors.
C:\development\referencebuilds\qt\4.7.4\bin\qmake
C:/development/referen cebuilds/qt/4.7.4/\projects.pro -o Makefile
-spec win32-msvc2008 Could not find mkspecs for your
QMAKESPEC(win32-msvc2008) after trying:
C:\Qt\4.7.2\mkspecs Error processing project file:
C:/development/referencebuilds/qt/4.7.4//projects .pro NMAKE : fatal
error U1077: 'C:\development\referencebuilds\qt\4.7.4\bin\qmake.EX E'
: return code '0x3' Stop.
I have no clue as to why it is refering to C:\Qt\4.7.2\mkspecs . How do I get over this error? what is exactly happening. How do I prevent such issues in future?
Your install directory is:
c:\development\referencebuilds\qt\4.7.4\qt-everywhere-opensource-4.7.4
Let's call it $(QTDIR). Now:
Extend your PATH variable to include $(QTDIR)\bin
Specify the QMAKESPEC environment variable to be win32-msvc2005
Open a Visual Studio command prompt to get the Visual Studio environment variables
Run configure
Run nmake
This procedure usually gets the Qt build to work for me.
Make sure that you don't have any existing QT directories in your path before you call configure and nmake.
It looks like you have a previous version of Qt installed. "C:\Qt\4.7.2\". And it would seem you have it setup in your system variables. Look for a variable called QTDIR in your system environment variables. Which is why you are getting an error, basically your 4.7.2 Qt is trying to build the new version.
Two options:
Un-install your old Qt via add/remove software in the control panel.
or
Remove your QTDIR system variable for the time being (will require a re-login) so that when you try to build from source it will use the correct binaries from the source folder.
Then just follow this guide:
http://en.wikibooks.org/wiki/Opticks_Developer_Guide/Getting_Started/Building_Qt_From_Source