Repetead string, replaceallin scala [duplicate] - regex

I would like to find a regex that will pick out all commas that fall outside quote sets.
For example:
'foo' => 'bar',
'foofoo' => 'bar,bar'
This would pick out the single comma on line 1, after 'bar',
I don't really care about single vs double quotes.
Has anyone got any thoughts? I feel like this should be possible with readaheads, but my regex fu is too weak.

This will match any string up to and including the first non-quoted ",". Is that what you are wanting?
/^([^"]|"[^"]*")*?(,)/
If you want all of them (and as a counter-example to the guy who said it wasn't possible) you could write:
/(,)(?=(?:[^"]|"[^"]*")*$)/
which will match all of them. Thus
'test, a "comma,", bob, ",sam,",here'.gsub(/(,)(?=(?:[^"]|"[^"]*")*$)/,';')
replaces all the commas not inside quotes with semicolons, and produces:
'test; a "comma,"; bob; ",sam,";here'
If you need it to work across line breaks just add the m (multiline) flag.

The below regexes would match all the comma's which are present outside the double quotes,
,(?=(?:[^"]*"[^"]*")*[^"]*$)
DEMO
OR(PCRE only)
"[^"]*"(*SKIP)(*F)|,
"[^"]*" matches all the double quoted block. That is, in this buz,"bar,foo" input, this regex would match "bar,foo" only. Now the following (*SKIP)(*F) makes the match to fail. Then it moves on to the pattern which was next to | symbol and tries to match characters from the remaining string. That is, in our output , next to pattern | will match only the comma which was just after to buz . Note that this won't match the comma which was present inside double quotes, because we already make the double quoted part to skip.
DEMO
The below regex would match all the comma's which are present inside the double quotes,
,(?!(?:[^"]*"[^"]*")*[^"]*$)
DEMO

While it's possible to hack it with a regex (and I enjoy abusing regexes as much as the next guy), you'll get in trouble sooner or later trying to handle substrings without a more advanced parser. Possible ways to get in trouble include mixed quotes, and escaped quotes.
This function will split a string on commas, but not those commas that are within a single- or double-quoted string. It can be easily extended with additional characters to use as quotes (though character pairs like « » would need a few more lines of code) and will even tell you if you forgot to close a quote in your data:
function splitNotStrings(str){
var parse=[], inString=false, escape=0, end=0
for(var i=0, c; c=str[i]; i++){ // looping over the characters in str
if(c==='\\'){ escape^=1; continue} // 1 when odd number of consecutive \
if(c===','){
if(!inString){
parse.push(str.slice(end, i))
end=i+1
}
}
else if(splitNotStrings.quotes.indexOf(c)>-1 && !escape){
if(c===inString) inString=false
else if(!inString) inString=c
}
escape=0
}
// now we finished parsing, strings should be closed
if(inString) throw SyntaxError('expected matching '+inString)
if(end<i) parse.push(str.slice(end, i))
return parse
}
splitNotStrings.quotes="'\"" // add other (symmetrical) quotes here

Try this regular expression:
(?:"(?:[^\\"]+|\\(?:\\\\)*[\\"])*"|'(?:[^\\']+|\\(?:\\\\)*[\\'])*')\s*=>\s*(?:"(?:[^\\"]+|\\(?:\\\\)*[\\"])*"|'(?:[^\\']+|\\(?:\\\\)*[\\'])*')\s*,
This does also allow strings like “'foo\'bar' => 'bar\\',”.

MarkusQ's answer worked great for me for about a year, until it didn't. I just got a stack overflow error on a line with about 120 commas and 3682 characters total. In Java, like this:
String[] cells = line.split("[\t,](?=(?:[^\"]|\"[^\"]*\")*$)", -1);
Here's my extremely inelegant replacement that doesn't stack overflow:
private String[] extractCellsFromLine(String line) {
List<String> cellList = new ArrayList<String>();
while (true) {
String[] firstCellAndRest;
if (line.startsWith("\"")) {
firstCellAndRest = line.split("([\t,])(?=(?:[^\"]|\"[^\"]*\")*$)", 2);
}
else {
firstCellAndRest = line.split("[\t,]", 2);
}
cellList.add(firstCellAndRest[0]);
if (firstCellAndRest.length == 1) {
break;
}
line = firstCellAndRest[1];
}
return cellList.toArray(new String[cellList.size()]);
}

#SocialCensus, The example you gave in the comment to MarkusQ, where you throw in ' alongside the ", doesn't work with the example MarkusQ gave right above that if we change sam to sam's: (test, a "comma,", bob, ",sam's,",here) has no match against (,)(?=(?:[^"']|["|'][^"']")$). In fact, the problem itself, "I don't really care about single vs double quotes", is ambiguous. You have to be clear what you mean by quoting either with " or with '. For example, is nesting allowed or not? If so, to how many levels? If only 1 nested level, what happens to a comma outside the inner nested quotation but inside the outer nesting quotation? You should also consider that single quotes happen by themselves as apostrophes (ie, like the counter-example I gave earlier with sam's). Finally, the regex you made doesn't really treat single quotes on par with double quotes since it assumes the last type of quotation mark is necessarily a double quote -- and replacing that last double quote with ['|"] also has a problem if the text doesn't come with correct quoting (or if apostrophes are used), though, I suppose we probably could assume all quotes are correctly delineated.
MarkusQ's regexp answers the question: find all commas that have an even number of double quotes after it (ie, are outside double quotes) and disregard all commas that have an odd number of double quotes after it (ie, are inside double quotes). This is generally the same solution as what you probably want, but let's look at a few anomalies. First, if someone leaves off a quotation mark at the end, then this regexp finds all the wrong commas rather than finding the desired ones or failing to match any. Of course, if a double quote is missing, all bets are off since it might not be clear if the missing one belongs at the end or instead belongs at the beginning; however, there is a case that is legitimate and where the regex could conceivably fail (this is the second "anomaly"). If you adjust the regexp to go across text lines, then you should be aware that quoting multiple consecutive paragraphs requires that you place a single double quote at the beginning of each paragraph and leave out the quote at the end of each paragraph except for at the end of the very last paragraph. This means that over the space of those paragraphs, the regex will fail in some places and succeed in others.
Examples and brief discussions of paragraph quoting and of nested quoting can be found here http://en.wikipedia.org/wiki/Quotation_mark .

Related

Regex to find pattern NOT enclosed in quotes [duplicate]

I would like to find a regex that will pick out all commas that fall outside quote sets.
For example:
'foo' => 'bar',
'foofoo' => 'bar,bar'
This would pick out the single comma on line 1, after 'bar',
I don't really care about single vs double quotes.
Has anyone got any thoughts? I feel like this should be possible with readaheads, but my regex fu is too weak.
This will match any string up to and including the first non-quoted ",". Is that what you are wanting?
/^([^"]|"[^"]*")*?(,)/
If you want all of them (and as a counter-example to the guy who said it wasn't possible) you could write:
/(,)(?=(?:[^"]|"[^"]*")*$)/
which will match all of them. Thus
'test, a "comma,", bob, ",sam,",here'.gsub(/(,)(?=(?:[^"]|"[^"]*")*$)/,';')
replaces all the commas not inside quotes with semicolons, and produces:
'test; a "comma,"; bob; ",sam,";here'
If you need it to work across line breaks just add the m (multiline) flag.
The below regexes would match all the comma's which are present outside the double quotes,
,(?=(?:[^"]*"[^"]*")*[^"]*$)
DEMO
OR(PCRE only)
"[^"]*"(*SKIP)(*F)|,
"[^"]*" matches all the double quoted block. That is, in this buz,"bar,foo" input, this regex would match "bar,foo" only. Now the following (*SKIP)(*F) makes the match to fail. Then it moves on to the pattern which was next to | symbol and tries to match characters from the remaining string. That is, in our output , next to pattern | will match only the comma which was just after to buz . Note that this won't match the comma which was present inside double quotes, because we already make the double quoted part to skip.
DEMO
The below regex would match all the comma's which are present inside the double quotes,
,(?!(?:[^"]*"[^"]*")*[^"]*$)
DEMO
While it's possible to hack it with a regex (and I enjoy abusing regexes as much as the next guy), you'll get in trouble sooner or later trying to handle substrings without a more advanced parser. Possible ways to get in trouble include mixed quotes, and escaped quotes.
This function will split a string on commas, but not those commas that are within a single- or double-quoted string. It can be easily extended with additional characters to use as quotes (though character pairs like « » would need a few more lines of code) and will even tell you if you forgot to close a quote in your data:
function splitNotStrings(str){
var parse=[], inString=false, escape=0, end=0
for(var i=0, c; c=str[i]; i++){ // looping over the characters in str
if(c==='\\'){ escape^=1; continue} // 1 when odd number of consecutive \
if(c===','){
if(!inString){
parse.push(str.slice(end, i))
end=i+1
}
}
else if(splitNotStrings.quotes.indexOf(c)>-1 && !escape){
if(c===inString) inString=false
else if(!inString) inString=c
}
escape=0
}
// now we finished parsing, strings should be closed
if(inString) throw SyntaxError('expected matching '+inString)
if(end<i) parse.push(str.slice(end, i))
return parse
}
splitNotStrings.quotes="'\"" // add other (symmetrical) quotes here
Try this regular expression:
(?:"(?:[^\\"]+|\\(?:\\\\)*[\\"])*"|'(?:[^\\']+|\\(?:\\\\)*[\\'])*')\s*=>\s*(?:"(?:[^\\"]+|\\(?:\\\\)*[\\"])*"|'(?:[^\\']+|\\(?:\\\\)*[\\'])*')\s*,
This does also allow strings like “'foo\'bar' => 'bar\\',”.
MarkusQ's answer worked great for me for about a year, until it didn't. I just got a stack overflow error on a line with about 120 commas and 3682 characters total. In Java, like this:
String[] cells = line.split("[\t,](?=(?:[^\"]|\"[^\"]*\")*$)", -1);
Here's my extremely inelegant replacement that doesn't stack overflow:
private String[] extractCellsFromLine(String line) {
List<String> cellList = new ArrayList<String>();
while (true) {
String[] firstCellAndRest;
if (line.startsWith("\"")) {
firstCellAndRest = line.split("([\t,])(?=(?:[^\"]|\"[^\"]*\")*$)", 2);
}
else {
firstCellAndRest = line.split("[\t,]", 2);
}
cellList.add(firstCellAndRest[0]);
if (firstCellAndRest.length == 1) {
break;
}
line = firstCellAndRest[1];
}
return cellList.toArray(new String[cellList.size()]);
}
#SocialCensus, The example you gave in the comment to MarkusQ, where you throw in ' alongside the ", doesn't work with the example MarkusQ gave right above that if we change sam to sam's: (test, a "comma,", bob, ",sam's,",here) has no match against (,)(?=(?:[^"']|["|'][^"']")$). In fact, the problem itself, "I don't really care about single vs double quotes", is ambiguous. You have to be clear what you mean by quoting either with " or with '. For example, is nesting allowed or not? If so, to how many levels? If only 1 nested level, what happens to a comma outside the inner nested quotation but inside the outer nesting quotation? You should also consider that single quotes happen by themselves as apostrophes (ie, like the counter-example I gave earlier with sam's). Finally, the regex you made doesn't really treat single quotes on par with double quotes since it assumes the last type of quotation mark is necessarily a double quote -- and replacing that last double quote with ['|"] also has a problem if the text doesn't come with correct quoting (or if apostrophes are used), though, I suppose we probably could assume all quotes are correctly delineated.
MarkusQ's regexp answers the question: find all commas that have an even number of double quotes after it (ie, are outside double quotes) and disregard all commas that have an odd number of double quotes after it (ie, are inside double quotes). This is generally the same solution as what you probably want, but let's look at a few anomalies. First, if someone leaves off a quotation mark at the end, then this regexp finds all the wrong commas rather than finding the desired ones or failing to match any. Of course, if a double quote is missing, all bets are off since it might not be clear if the missing one belongs at the end or instead belongs at the beginning; however, there is a case that is legitimate and where the regex could conceivably fail (this is the second "anomaly"). If you adjust the regexp to go across text lines, then you should be aware that quoting multiple consecutive paragraphs requires that you place a single double quote at the beginning of each paragraph and leave out the quote at the end of each paragraph except for at the end of the very last paragraph. This means that over the space of those paragraphs, the regex will fail in some places and succeed in others.
Examples and brief discussions of paragraph quoting and of nested quoting can be found here http://en.wikipedia.org/wiki/Quotation_mark .

Replace double quoted strings by single quoted except for GStrings

My OCD has gotten the better of me and I'm going through my groovy codebase replacing simple strings with double quotes around them into single quoted strings.
However, I want to avoid GStrings that actually contain dollar symbols and variables.
I'm using IntelliJ to do the substitution, and the following almost works:
From: "([^$\"\n\r]+)"
To: '$1'
It captures strings without any dollars in, but only partially skips any strings that contain them.
For example it matches the quotes between two double quoted strings in this case:
foo("${var}": "bar")
^^^^
Is it possible to create a regex that would skip a whole string that contained dollars, so in the above case it skips "${var}" and selects "bar", instead of erroneously selecting ": "?
EDIT: Here's a section of code to try against
table.columns.elements.each{ columnName, column ->
def columnText = "${columnName} : ${column.dataType}"
cols += "${columnText}\n"
if (columnText.length() > width) {
width = columnText.length()
}
height++
}
builder."node"("id": table.elementName) {
builder."data"("key": "d0") {
builder."y:ShapeNode"()
}
}
def foo() {
def string = """
a multiline quote using triple quotes with ${var} gstring vars in.
"""
}
Do single and triple quote replacements separately.
Single quotes:
Use a look ahead for an even number of quotes after your hit. A negative look behind stops it matching the inner quotes of triple quoted strings.
Find: (?<!")"([^"$]*)"(?=(?:(?:[^"\r\n]*"){2})*[^"]*$)
Replace: '$1'
See live demo.
Triple quotes:
Use a simpler match for triple quoted strings, since they are on their own lines.
Find: """([^"$]*?)"""
Replace: '''$1'''
See live demo, which includes a triple-quoted string that contains a variable.
You need to make sure the first quote comes after even number of quotes:
^[^\n\r"]*(?:(?:"[^"\n\r]*){2})*"([^$\"\n\r]+)"
Here you can play with it.
Explanation:
^[^"\n\r]* - some non-quotes at the beginning
"[^"\n\r]* - a quote, then some more non-quotes
(?:"[^"\n\r]*){2} - let's have two of this
(?:(?:...)) - actually, let's have 0, 2, 4, 6, ... whatever amount of this
Then your regex comes to match the right string: "([^$\"\n\r]+)"
If intellij supports that, then you can make it faster by replacing the non-capturing groups (?:...) with atomic groups (?>...).
This regex finds the last string in the line so you'll have to run the replace several times.
Update
Updated the negated character classes with the newline characters. Now it works well for multi-line texts too. Still, you'll have to run it several times because it finds only one string per line.

Regex parse a command line string but don't return spaces between quotes

I am using python to parse a string that is passed in by the optparse module.
I want to split the string on certain delimiters but not in between quote marks.
A sample string is:
--state-basedir /dir/dir/dir/ --cmd=\"param load $v2param\" --master=/dev/ttyUSB0 --console --map --out=udp:192.168.1.1:14550
This string is passed in as a single optparse argument, I am then going to pass it to another process.
I have been trying various things at http://pythex.org/
The closest I have gotten is:
`(?<!")[\s=](?![\s0-9a-zA-Z\$\\]*")`
The issue is that the = sign after --cmd and the space before --master are not matched.
In plain English, this is how I am reading my regex:
match either a space character or an equal character as long as it is not preceded by a quotation mark and as long as it is not proceeded by a combination of any other letter,numbers,punctuation and another quotation mark
I had a feeling that there was something else I was missing, like greediness, so I tried adding ? after my look-ahead and look-behind terms. If I put a ? after my look-behind one I can get the space before --master but if I put the ? after my look-ahead term I get the spaces in the quotation marks now, which I don't want.
The idea here is that I am going to use re.split to handle things.
Thanks for any explanations as to what I am doing wrong.
This is not a regex answer and it's also not pretty, but it is one line.
sum([[x] if '"' in x else re.split(' |=',x) for x in re.split('=(\".+?\" )',a)],[])
output:
['--state-basedir', '/dir/dir/dir/', '--cmd', '"param load $v2param" ', '--master', '/dev/ttyUSB0', '--console', '--map', '--out', 'udp:192.168.1.1:14550']
Starting from the re.split('=(\".+?\" )',a)] this splits out text surrounded by quotes (more specifically ="something another thing"). The split pieces are then split further with re.split(' |=',x) if they do not have a " in them, or are just returned as is [x] if they do. The last step is collapsing the resulting 2d list by overloading sum with sum(two_d_list,[]).
I hope this answer helps but I understand if it isn't what you're looking for

Regex to capture VBA comments

I'm trying to capture VBA comments. I have the following so far
'[^";]+\Z
Which captures anything that starts with a single quote but not contain any double quotes until end of string. i.e. it will not match single quotes within a double quote string.
dim s as string ' a string variable -- works
s = "the cat's hat" ' quote within string -- works
But fails if the comment contains a double quote string
i.e.
dim s as string ' string should be set to "ten"
How can I fix my regex to handle that too?
The pattern in #Jeff Wurz's comment (^\'[^\r\n]+$|''[^\r\n]+$) doesn't even match any of your test samples, and the linked question is useless, the regex in there will only match that specific comment in the OP's question, not "the VBA comment syntax".
The regex you have come up with works even better than what I had when I gave up the regex approach.
Well done!
The problem is that you can't parse VBA comments with a regex.
In Lexers vs Parsers, #SasQ's answer does a good job at explaining Chomsky's grammar levels:
Level 3: Regular grammars
They use regular expressions, that is, they can consist only of the
symbols of alphabet (a,b), their concatenations (ab,aba,bbb etd.), or
alternatives (e.g. a|b). They can be implemented as finite state
automata (FSA), like NFA (Nondeterministic Finite Automaton) or better
DFA (Deterministic Finite Automaton). Regular grammars can't handle
with nested syntax, e.g. properly nested/matched parentheses
(()()(()())), nested HTML/BBcode tags, nested blocks etc. It's because
state automata to deal with it should have to have infinitely many
states to handle infinitely many nesting levels.
Level 2: Context-free grammars
They can have nested, recursive, self-similar branches in their syntax
trees, so they can handle with nested structures well. They can be
implemented as state automaton with stack. This stack is used to
represent the nesting level of the syntax. In practice, they're
usually implemented as a top-down, recursive-descent parser which uses
machine's procedure call stack to track the nesting level, and use
recursively called procedures/functions for every non-terminal symbol
in their syntax. But they can't handle with a context-sensitive
syntax. E.g. when you have an expression x+3 and in one context this x
could be a name of a variable, and in other context it could be a name
of a function etc.
Level 1: Context-sensitive grammars
Regular Expressions simply aren't the appropriate tool for solving this problem, because whenever there's more than a single quote (/apostrophe), or when double quotes are involved, you need to figure out whether the left-most apostrophe in the code line is inside double quotes, and if it is, then you need to match the double quotes and find the left-most apostrophe after the closing double quote - actually, the left-most apostrophe that isn't part of a string literal, is your comment marker.
My understanding is that VBA comment syntax is a context-sensitive grammar (level 1), because the apostrophe is only your marker if it's not part of a string literal, and to figure out whether an apostrophe is part of a string literal, the easiest is probably to walk your string left to right and to toggle some IsInsideQuote flag as you encounter double-quotes... but only if they're not escaped (doubled-up). Actually you don't even check to see if there's an apostrophe inside the string litereal: you just keep walking until open quotes are closed, and only when the "in-quotes flag" is False you found a comment marker if you encounter a single quote.
Good luck!
Here's a test case you're missing:
s = "abc'def ""xyz""'nutz!" 'string with apostrophes and escaped double quotes
If you don't care about capturing the string literals, you can simply ignore the escaped double quotes and see 3 string literals here: "abc'def ", "xyz" and "'nutz!".
This C# code outputs 'string with apostrophes and escaped double quotes (all in-string double quotes are escaped with a backslash in the code), and works with all the test strings I gave it:
static void Main(string[] args)
{
var instruction = "s = \"abc'def \"\"xyz\"\"'nutz!\" 'string with apostrophes and escaped double quotes";
// var instruction = "s = \"the cat's hat\" ' quote within string -- works";
// var instruction = "dim s as string ' string should be set to \"ten\"";
int? commentStart = null;
var isInsideQuotes = false;
for (var i = 0; i < instruction.Length; i++)
{
if (instruction[i] == '"')
{
isInsideQuotes = !isInsideQuotes;
}
if (!isInsideQuotes && instruction[i] == '\'')
{
commentStart = i;
break;
}
}
if (commentStart.HasValue)
{
Console.WriteLine(instruction.Substring(commentStart.Value));
}
Console.ReadLine();
}
Then if you want to capture all legal comments, you need to handle the legacy Rem keyword, and consider line continuations:
Rem this is a legal comment
' this _
is also _
a legal comment
In other words, \r\n in itself isn't enough to correctly identify all end-of-statement tokens.
A proper lexer+parser seems the only way to capture all comments.

Regex to pick characters outside of pair of quotes

I would like to find a regex that will pick out all commas that fall outside quote sets.
For example:
'foo' => 'bar',
'foofoo' => 'bar,bar'
This would pick out the single comma on line 1, after 'bar',
I don't really care about single vs double quotes.
Has anyone got any thoughts? I feel like this should be possible with readaheads, but my regex fu is too weak.
This will match any string up to and including the first non-quoted ",". Is that what you are wanting?
/^([^"]|"[^"]*")*?(,)/
If you want all of them (and as a counter-example to the guy who said it wasn't possible) you could write:
/(,)(?=(?:[^"]|"[^"]*")*$)/
which will match all of them. Thus
'test, a "comma,", bob, ",sam,",here'.gsub(/(,)(?=(?:[^"]|"[^"]*")*$)/,';')
replaces all the commas not inside quotes with semicolons, and produces:
'test; a "comma,"; bob; ",sam,";here'
If you need it to work across line breaks just add the m (multiline) flag.
The below regexes would match all the comma's which are present outside the double quotes,
,(?=(?:[^"]*"[^"]*")*[^"]*$)
DEMO
OR(PCRE only)
"[^"]*"(*SKIP)(*F)|,
"[^"]*" matches all the double quoted block. That is, in this buz,"bar,foo" input, this regex would match "bar,foo" only. Now the following (*SKIP)(*F) makes the match to fail. Then it moves on to the pattern which was next to | symbol and tries to match characters from the remaining string. That is, in our output , next to pattern | will match only the comma which was just after to buz . Note that this won't match the comma which was present inside double quotes, because we already make the double quoted part to skip.
DEMO
The below regex would match all the comma's which are present inside the double quotes,
,(?!(?:[^"]*"[^"]*")*[^"]*$)
DEMO
While it's possible to hack it with a regex (and I enjoy abusing regexes as much as the next guy), you'll get in trouble sooner or later trying to handle substrings without a more advanced parser. Possible ways to get in trouble include mixed quotes, and escaped quotes.
This function will split a string on commas, but not those commas that are within a single- or double-quoted string. It can be easily extended with additional characters to use as quotes (though character pairs like « » would need a few more lines of code) and will even tell you if you forgot to close a quote in your data:
function splitNotStrings(str){
var parse=[], inString=false, escape=0, end=0
for(var i=0, c; c=str[i]; i++){ // looping over the characters in str
if(c==='\\'){ escape^=1; continue} // 1 when odd number of consecutive \
if(c===','){
if(!inString){
parse.push(str.slice(end, i))
end=i+1
}
}
else if(splitNotStrings.quotes.indexOf(c)>-1 && !escape){
if(c===inString) inString=false
else if(!inString) inString=c
}
escape=0
}
// now we finished parsing, strings should be closed
if(inString) throw SyntaxError('expected matching '+inString)
if(end<i) parse.push(str.slice(end, i))
return parse
}
splitNotStrings.quotes="'\"" // add other (symmetrical) quotes here
Try this regular expression:
(?:"(?:[^\\"]+|\\(?:\\\\)*[\\"])*"|'(?:[^\\']+|\\(?:\\\\)*[\\'])*')\s*=>\s*(?:"(?:[^\\"]+|\\(?:\\\\)*[\\"])*"|'(?:[^\\']+|\\(?:\\\\)*[\\'])*')\s*,
This does also allow strings like “'foo\'bar' => 'bar\\',”.
MarkusQ's answer worked great for me for about a year, until it didn't. I just got a stack overflow error on a line with about 120 commas and 3682 characters total. In Java, like this:
String[] cells = line.split("[\t,](?=(?:[^\"]|\"[^\"]*\")*$)", -1);
Here's my extremely inelegant replacement that doesn't stack overflow:
private String[] extractCellsFromLine(String line) {
List<String> cellList = new ArrayList<String>();
while (true) {
String[] firstCellAndRest;
if (line.startsWith("\"")) {
firstCellAndRest = line.split("([\t,])(?=(?:[^\"]|\"[^\"]*\")*$)", 2);
}
else {
firstCellAndRest = line.split("[\t,]", 2);
}
cellList.add(firstCellAndRest[0]);
if (firstCellAndRest.length == 1) {
break;
}
line = firstCellAndRest[1];
}
return cellList.toArray(new String[cellList.size()]);
}
#SocialCensus, The example you gave in the comment to MarkusQ, where you throw in ' alongside the ", doesn't work with the example MarkusQ gave right above that if we change sam to sam's: (test, a "comma,", bob, ",sam's,",here) has no match against (,)(?=(?:[^"']|["|'][^"']")$). In fact, the problem itself, "I don't really care about single vs double quotes", is ambiguous. You have to be clear what you mean by quoting either with " or with '. For example, is nesting allowed or not? If so, to how many levels? If only 1 nested level, what happens to a comma outside the inner nested quotation but inside the outer nesting quotation? You should also consider that single quotes happen by themselves as apostrophes (ie, like the counter-example I gave earlier with sam's). Finally, the regex you made doesn't really treat single quotes on par with double quotes since it assumes the last type of quotation mark is necessarily a double quote -- and replacing that last double quote with ['|"] also has a problem if the text doesn't come with correct quoting (or if apostrophes are used), though, I suppose we probably could assume all quotes are correctly delineated.
MarkusQ's regexp answers the question: find all commas that have an even number of double quotes after it (ie, are outside double quotes) and disregard all commas that have an odd number of double quotes after it (ie, are inside double quotes). This is generally the same solution as what you probably want, but let's look at a few anomalies. First, if someone leaves off a quotation mark at the end, then this regexp finds all the wrong commas rather than finding the desired ones or failing to match any. Of course, if a double quote is missing, all bets are off since it might not be clear if the missing one belongs at the end or instead belongs at the beginning; however, there is a case that is legitimate and where the regex could conceivably fail (this is the second "anomaly"). If you adjust the regexp to go across text lines, then you should be aware that quoting multiple consecutive paragraphs requires that you place a single double quote at the beginning of each paragraph and leave out the quote at the end of each paragraph except for at the end of the very last paragraph. This means that over the space of those paragraphs, the regex will fail in some places and succeed in others.
Examples and brief discussions of paragraph quoting and of nested quoting can be found here http://en.wikipedia.org/wiki/Quotation_mark .