Related
Every time I try to install visual studio community version I run into an issue with missing setup packages. The installer particularly tells me that I am missing vcredist_x86.exe.
However, I have installed the visual c++ redistributable Packages for Visual Studio 2013 as well as the ones for visual studio 2015. I don't get why this message keeps coming up.
I can continue installation if I select "skip", but the message comes back not much later.
Try running the installer with administrator rights (right click on installer exe and select 'Run as administrator').
I've installed Visual Studio 2012 Release Preview, and it appears to be fine, but now when I try to use Visual Studio 2010 to compile C++ projects, I get the following error message:
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
I'm not 100% sure of this, but it seems to be related to projects that have .rc (resource) files in them.
I've tried repairing Visual Studio 2010 from Add/Remove programs and rebooting, but this has no effect.
I also get the same error if I use Visual Studio 2012 RC to compile the C++ projects when set to use the Visual Studio 2010 toolset. Upgrading to the Visual Studio 2011 toolset fixes the problem (but of course I don't want to do this for production code).
Update: I've uninstalled Visual Studio 2012, rebooted, and the problem still persists! Help!
This MSDN thread explains how to fix it.
To summarize:
Either disable incremental linking, by going to
Project Properties
-> Configuration Properties
-> Linker (General)
-> Enable Incremental Linking -> "No (/INCREMENTAL:NO)"
or install VS2010 SP1.
Edits (#CraigRinger): Note that installing VS 2010 SP1 will remove the 64-bit compilers. You need to install the VS 2010 SP1 compiler pack to get them back.
This affects Microsoft Windows SDK 7.1 for Windows 7 and .NET 4.0 as well as Visual Studio 2010.
If disabling incremental linking doesn't work for you, and turning off "Embed Manifest" doesn't work either, then search your path for multiple versions of CVTRES.exe.
By debugging with the /VERBOSE linker option I found the linker was writing that error message when it tried to invoke cvtres and it failed.
It turned out that I had two versions of this utility in my path. One at C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\BIN\cvtres.exe and one at C:\Windows\Microsoft.NET\Framework\v4.0.30319\cvtres.exe. After VS2012 install, the VS2010 version of cvtres.exe will no longer work. If that's the first one in your path, and the linker decides it needs to convert a .res file to COFF object format, the link will fail with LNK1123.
(Really annoying that the error message has nothing to do with the actual problem, but that's not unusual for a Microsoft product.)
Just delete/rename the older version of the utility, or re-arrange your PATH variable, so that the version that works comes first.
Be aware that for x64 tooling builds you may also have to check C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\amd64 where there is another cvtres.exe.
Check the version of cvtrs.exe:
dir "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe"
Wrong version:
date: 03/18/2010
time: 01:16 PM
size: 31,048 bytes
name: cvtres.exe
Correct version:
date: 02/21/2011
time: 06:03 PM
size: 31,056 bytes
name: cvtres.exe
If you have wrong version you should copy the correct version from:
C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\bin\cvtres.exe
and replace the one here:
C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe
i.e.
copy "C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\bin\cvtres.exe" "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe"
According to this thread in MSDN forums: VS2012 RC installation breaks VS2010 C++ projects, simply, take cvtres.exe from VS2010 SP1
C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe
or from VS2012
C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\bin\cvtres.exe
and copy it over the cvtres.exe in VS2010 RTM installation (the one without SP1)
C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe
This way, you will effectively use the corrected version of cvtres.exe which is 11.0.51106.1.
Repeat the same steps for 64-bit version of the tool in C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\amd64\cvtres.exe.
This solution is an alternative to installation of SP1 for VS2010 - in some cases you simply can't install SP1 (i.e. if you need to support pre-SP1 builds).
If you have installed Visual Studio 2012 RC, then it installed .NET 4.5 RC.
Uninstall .NET 4.5 RC, and install the version you need (4.0 for VS 2010). This should clear up any problems you are having.
This solved the same problem. There is no need to uninstall Visual Studio.
It's because of .NET Framework 4.5 is replacing .NET Framework 4.0.
I uninstalled Visual Studio 2010 several times with no luck. When I removed .NET Framework 4.5 and reinstalled Visual Studio 2010 it went fine.
See Uninstall Visual Studio 11 completely to do a fresh install.
For me, setting 'Generate Manifest' to 'No' fixed it. (Also fixed with /INCREMENTAL:NO)
If you're using x64, here's a resource will help:
This happens because Microsoft .NET 4.5 is incompatible with Visual C++ 10. The workaround is to ensure that you run the .NET version of cvtres.exe rather than the Visual C++ version. I did this by renaming the Visual C++ versions of those files and copying the .NET versions in their place.
1. C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe
2. C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\amd64\cvtres.exe
1. C:\windows\Microsoft.NET\Framework\v4.0.30319\cvtres.exe
2. C:\windows\Microsoft.NET\Framework64\v4.0.30319\cvtres.exe
I solved this problem eventually by doing a full uninstall of VS2012 RC, followed by a full uninstall of VS2010, then a reinstall from scratch of VS2010.
It took forever, but I'm now able to compile C++ projects in VS2010 again.
The issue was magically resolved for me by removing .NET 4.5, and replacing it with .NET 4.0. I then had to repair Visual Studio 2010 - it being corrupted along the way somehow.
I had previously installed, and then un-installed, Visual Studio 2012 - which may be related to the issue.
I have not installed Visual Studio 2012, but I still got this error in Visual Studio 2010. I got this resolved after installing Visual Studio 2010 SP1.
I had the same problem with Microsoft Visual Studio 2010 Ultimate and it was solved by the method described in this youtube video
The video suggests to rename the file cvtres.exe in C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin (in my Win7X64 matchine) to cvtres-old.exe
It didn't work for me after Enable Incremental Linking -> "No (/INCREMENTAL:NO)", but it works for me after I deleted the rc file.
+1 to user Short for an answer that worked for me!
I tried to do some debugging of this with msbuild /v:diag, and I'm seeing that MSBuild is trying to embed a manifest in the executable, with <somename>.dll.embed.manifest.res on the linker command line, where that is a resource file built from <somename>.dll.embed.manifest. But the manifest file is an empty Unicode text file. (That is, a two-byte file with the Unicode 0xFEFF prefix)
So the root problem seems to have something to do with that manifest file not being generated, or it being used when <somename>.dll.intermediate.manifest should have been used.
An alternate solution seems to be to turn off the "Embed Manifest" option under Properties, Manifest Tool, Input and Output.
To summarize:
Step1
Project Properties
-> Configuration Properties
-> Linker (General)
-> Enable Incremental Linking -> "No (/INCREMENTAL:NO)"
if step1 not work, do Step2
Project Properties
-> Configuration Properties
-> Manifest Tool (Input and Output)
-> Enable Incremental Linking -> "No"
if step2 not work, do Step3
Copy file one of:
C:\Program Files (x86)\Microsoft Visual Studio
11.0\VC\bin\cvtres.exe
C:\Program Files (x86)\Microsoft Visual Studio
12.0\VC\bin\cvtres.exe
C:\Program Files (x86)\Microsoft Visual Studio
13.0\VC\bin\cvtres.exe
Then, replace to C:\Program Files (x86)\Microsoft Visual Studio
10.0\VC\bin\cvtres.exe
With me, do 3 step it work
As of January 2014, for some reasons I got installed .NET Framework 4.5.1, I don't know if due to a third party software installation or to an automatic update.
On January 29th, I got installed one component and I started receiving the
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
message. At that time, I solved by avoiding the incremental link.
On Jan. 31st, I got installed another component of .NET Framework 4.5.1 and the incremental link trick did not work anymore. I then installed the Visual Studio 2010 SP1, but afterwards the problem became:
Error 6 error LNK1104: cannot open file 'msvcrtd.lib'.
I think the SP1 messed up my Visual Studio 2010 installation.
So I uninstalled .NET Framework 4.5.1, installed .NET Framework 4.0 and uninstalled and then reinstalled Visual Studio 2010. That worked for me.
Even inspite of installing Service pack you are getting the error then try removing/renaming the cvtres.exe in the C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin folder. This has worked for me.
I set Enable Incremental Linking to "No (/INCREMENTAL:NO)" and it doesn't work for me.
Next I've changed:
Project Properties
-> Configuration Properties
-> General
-> Platform Toolset -> "Visual Studio 2012 (v110)"
and it works for me :)
Reinstalling CMake worked for me. The new copy of CMake figured out that it should use Visual Studio 11 instead of 10.
I was using the Windows SDK for core Win32 programming and had .NET 4.5 installed for "unknown" reasons. I have uninstalled that and installed 4.0 like previous answers and yeah, it worked for me too.
Just am flabbergasted that I had to use the useless .NET framework for building Win32 apps using the SDK.
I solved this by doing the following:
In a command prompt, type msconfig and press enter.
Click services tab.
Look for "Application Experience" and put tick mark (that is, select this to enable).
Click OK. And restart if necessary.
Thus the problem will go forever. Do build randomly and debug your C++ projects without any disturbance.
For those of you looking for a solution for this problem with the OpenGL SuperBible 6th source code samples, the solution is building in Release instead of Debug. All projects have disabled the incremental linking option in the Release version.
My problem was that I've had two paths on my PC that contained the same libraries. Both paths were added to the Additional Library Directories in Configuration Properties -> Linker -> General. Removing one of the paths solved the problem.
I had the same problem after updating of .NET:
I uninstalled the .NET framework first,
downloaded visual studio from visualstudio.com and selected "repair".
NET framework were installed automatically with visual studio -> and now it works fine!
I tried a few times and finally solved the problem by uninstalling several times the VS2010. I think I hadn't uninstalled all the files and that's why it didn't work for the first time.
In the installation of VS2012, it is said that if you have VS2010 SP1 you can't work on the same project in both programs. It is recommended to have only one program.
Thanks!
All my C++ Visual Studio 2012 projects cannot be upgraded by VS 2013 Professional Update 2, microsoft tells that you also need to have VS2012 installed in order to open VS 2012 projects.
The problem is that I have installed VS2012 and still get the same error.
after each project name in VS 2013 I have (Project incompatible), I want to convert the projects to VS2013 because I don't want to use VS2012 anymore.
Unsupported
This version of Visual Studio is unable to open the following projects. The project types may not be installed or this version of Visual Studio may not support them.
For more information on enabling these project types or otherwise migrating your assets, please see the details in the "Migration Report" displayed after clicking OK.
No changes required
These projects can be opened in Visual Studio 2013, Visual Studio 2012, and Visual Studio 2010 SP1 without changing them.
and this is the error in migration report
The application which this project type is based on was not found.
I found somewhere on a forum that if you install VS 2012 SDK it should work, but the VS2012 SDK cannot be installed because it cannot find Visual Studio 2012
I've installed Visual Studio 2012 Release Preview, and it appears to be fine, but now when I try to use Visual Studio 2010 to compile C++ projects, I get the following error message:
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
I'm not 100% sure of this, but it seems to be related to projects that have .rc (resource) files in them.
I've tried repairing Visual Studio 2010 from Add/Remove programs and rebooting, but this has no effect.
I also get the same error if I use Visual Studio 2012 RC to compile the C++ projects when set to use the Visual Studio 2010 toolset. Upgrading to the Visual Studio 2011 toolset fixes the problem (but of course I don't want to do this for production code).
Update: I've uninstalled Visual Studio 2012, rebooted, and the problem still persists! Help!
This MSDN thread explains how to fix it.
To summarize:
Either disable incremental linking, by going to
Project Properties
-> Configuration Properties
-> Linker (General)
-> Enable Incremental Linking -> "No (/INCREMENTAL:NO)"
or install VS2010 SP1.
Edits (#CraigRinger): Note that installing VS 2010 SP1 will remove the 64-bit compilers. You need to install the VS 2010 SP1 compiler pack to get them back.
This affects Microsoft Windows SDK 7.1 for Windows 7 and .NET 4.0 as well as Visual Studio 2010.
If disabling incremental linking doesn't work for you, and turning off "Embed Manifest" doesn't work either, then search your path for multiple versions of CVTRES.exe.
By debugging with the /VERBOSE linker option I found the linker was writing that error message when it tried to invoke cvtres and it failed.
It turned out that I had two versions of this utility in my path. One at C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\BIN\cvtres.exe and one at C:\Windows\Microsoft.NET\Framework\v4.0.30319\cvtres.exe. After VS2012 install, the VS2010 version of cvtres.exe will no longer work. If that's the first one in your path, and the linker decides it needs to convert a .res file to COFF object format, the link will fail with LNK1123.
(Really annoying that the error message has nothing to do with the actual problem, but that's not unusual for a Microsoft product.)
Just delete/rename the older version of the utility, or re-arrange your PATH variable, so that the version that works comes first.
Be aware that for x64 tooling builds you may also have to check C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\amd64 where there is another cvtres.exe.
Check the version of cvtrs.exe:
dir "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe"
Wrong version:
date: 03/18/2010
time: 01:16 PM
size: 31,048 bytes
name: cvtres.exe
Correct version:
date: 02/21/2011
time: 06:03 PM
size: 31,056 bytes
name: cvtres.exe
If you have wrong version you should copy the correct version from:
C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\bin\cvtres.exe
and replace the one here:
C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe
i.e.
copy "C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\bin\cvtres.exe" "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe"
According to this thread in MSDN forums: VS2012 RC installation breaks VS2010 C++ projects, simply, take cvtres.exe from VS2010 SP1
C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe
or from VS2012
C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\bin\cvtres.exe
and copy it over the cvtres.exe in VS2010 RTM installation (the one without SP1)
C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe
This way, you will effectively use the corrected version of cvtres.exe which is 11.0.51106.1.
Repeat the same steps for 64-bit version of the tool in C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\amd64\cvtres.exe.
This solution is an alternative to installation of SP1 for VS2010 - in some cases you simply can't install SP1 (i.e. if you need to support pre-SP1 builds).
If you have installed Visual Studio 2012 RC, then it installed .NET 4.5 RC.
Uninstall .NET 4.5 RC, and install the version you need (4.0 for VS 2010). This should clear up any problems you are having.
This solved the same problem. There is no need to uninstall Visual Studio.
It's because of .NET Framework 4.5 is replacing .NET Framework 4.0.
I uninstalled Visual Studio 2010 several times with no luck. When I removed .NET Framework 4.5 and reinstalled Visual Studio 2010 it went fine.
See Uninstall Visual Studio 11 completely to do a fresh install.
For me, setting 'Generate Manifest' to 'No' fixed it. (Also fixed with /INCREMENTAL:NO)
If you're using x64, here's a resource will help:
This happens because Microsoft .NET 4.5 is incompatible with Visual C++ 10. The workaround is to ensure that you run the .NET version of cvtres.exe rather than the Visual C++ version. I did this by renaming the Visual C++ versions of those files and copying the .NET versions in their place.
1. C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\cvtres.exe
2. C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\amd64\cvtres.exe
1. C:\windows\Microsoft.NET\Framework\v4.0.30319\cvtres.exe
2. C:\windows\Microsoft.NET\Framework64\v4.0.30319\cvtres.exe
I solved this problem eventually by doing a full uninstall of VS2012 RC, followed by a full uninstall of VS2010, then a reinstall from scratch of VS2010.
It took forever, but I'm now able to compile C++ projects in VS2010 again.
The issue was magically resolved for me by removing .NET 4.5, and replacing it with .NET 4.0. I then had to repair Visual Studio 2010 - it being corrupted along the way somehow.
I had previously installed, and then un-installed, Visual Studio 2012 - which may be related to the issue.
I have not installed Visual Studio 2012, but I still got this error in Visual Studio 2010. I got this resolved after installing Visual Studio 2010 SP1.
I had the same problem with Microsoft Visual Studio 2010 Ultimate and it was solved by the method described in this youtube video
The video suggests to rename the file cvtres.exe in C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin (in my Win7X64 matchine) to cvtres-old.exe
It didn't work for me after Enable Incremental Linking -> "No (/INCREMENTAL:NO)", but it works for me after I deleted the rc file.
+1 to user Short for an answer that worked for me!
I tried to do some debugging of this with msbuild /v:diag, and I'm seeing that MSBuild is trying to embed a manifest in the executable, with <somename>.dll.embed.manifest.res on the linker command line, where that is a resource file built from <somename>.dll.embed.manifest. But the manifest file is an empty Unicode text file. (That is, a two-byte file with the Unicode 0xFEFF prefix)
So the root problem seems to have something to do with that manifest file not being generated, or it being used when <somename>.dll.intermediate.manifest should have been used.
An alternate solution seems to be to turn off the "Embed Manifest" option under Properties, Manifest Tool, Input and Output.
To summarize:
Step1
Project Properties
-> Configuration Properties
-> Linker (General)
-> Enable Incremental Linking -> "No (/INCREMENTAL:NO)"
if step1 not work, do Step2
Project Properties
-> Configuration Properties
-> Manifest Tool (Input and Output)
-> Enable Incremental Linking -> "No"
if step2 not work, do Step3
Copy file one of:
C:\Program Files (x86)\Microsoft Visual Studio
11.0\VC\bin\cvtres.exe
C:\Program Files (x86)\Microsoft Visual Studio
12.0\VC\bin\cvtres.exe
C:\Program Files (x86)\Microsoft Visual Studio
13.0\VC\bin\cvtres.exe
Then, replace to C:\Program Files (x86)\Microsoft Visual Studio
10.0\VC\bin\cvtres.exe
With me, do 3 step it work
As of January 2014, for some reasons I got installed .NET Framework 4.5.1, I don't know if due to a third party software installation or to an automatic update.
On January 29th, I got installed one component and I started receiving the
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
message. At that time, I solved by avoiding the incremental link.
On Jan. 31st, I got installed another component of .NET Framework 4.5.1 and the incremental link trick did not work anymore. I then installed the Visual Studio 2010 SP1, but afterwards the problem became:
Error 6 error LNK1104: cannot open file 'msvcrtd.lib'.
I think the SP1 messed up my Visual Studio 2010 installation.
So I uninstalled .NET Framework 4.5.1, installed .NET Framework 4.0 and uninstalled and then reinstalled Visual Studio 2010. That worked for me.
Even inspite of installing Service pack you are getting the error then try removing/renaming the cvtres.exe in the C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin folder. This has worked for me.
I set Enable Incremental Linking to "No (/INCREMENTAL:NO)" and it doesn't work for me.
Next I've changed:
Project Properties
-> Configuration Properties
-> General
-> Platform Toolset -> "Visual Studio 2012 (v110)"
and it works for me :)
Reinstalling CMake worked for me. The new copy of CMake figured out that it should use Visual Studio 11 instead of 10.
I was using the Windows SDK for core Win32 programming and had .NET 4.5 installed for "unknown" reasons. I have uninstalled that and installed 4.0 like previous answers and yeah, it worked for me too.
Just am flabbergasted that I had to use the useless .NET framework for building Win32 apps using the SDK.
I solved this by doing the following:
In a command prompt, type msconfig and press enter.
Click services tab.
Look for "Application Experience" and put tick mark (that is, select this to enable).
Click OK. And restart if necessary.
Thus the problem will go forever. Do build randomly and debug your C++ projects without any disturbance.
For those of you looking for a solution for this problem with the OpenGL SuperBible 6th source code samples, the solution is building in Release instead of Debug. All projects have disabled the incremental linking option in the Release version.
My problem was that I've had two paths on my PC that contained the same libraries. Both paths were added to the Additional Library Directories in Configuration Properties -> Linker -> General. Removing one of the paths solved the problem.
I had the same problem after updating of .NET:
I uninstalled the .NET framework first,
downloaded visual studio from visualstudio.com and selected "repair".
NET framework were installed automatically with visual studio -> and now it works fine!
I tried a few times and finally solved the problem by uninstalling several times the VS2010. I think I hadn't uninstalled all the files and that's why it didn't work for the first time.
In the installation of VS2012, it is said that if you have VS2010 SP1 you can't work on the same project in both programs. It is recommended to have only one program.
Thanks!
i am developing a software using Visual C++ 2008 Express Edition. after build in release mode, i have made a setup file with latest redist 2008. the software is running in my PC fine. in my PC this redist are installed :
in my friends PC, the same redist are installed. but the software is crashing on my friends PC.
from the event log it shows:
as you can see, it is demanding 9.0.21022.8 version of redist whether there is previously installed latest version of redist(9.0.30729.17). so, i go for a google. from the internet, i edit my C:\Program Files\Microsoft Visual Studio 9.0\VC\include\crtassem.h
but it didn't help. then i check my project manifest. and i saw :
but i don't know how to edit manifest (i am new in VC++). and i also check C:\Program Files\Microsoft Visual Studio 9.0\VC\redist\x86\Microsoft.VC90.CRT\Microsoft.VC90.CRT.manifest. i shows:
i have tried to find out 9.0.21022.8 version of redist in the internet. but i have failed. from my VCExpress installer there is a file named vcredistmin_x86.exe :
as you can see the version of the file is 9.0.21022.8. i think this is the redist i need. but i cannot install it. it says "run the setup.exe file"
what can i do?
Edit(if i am asking two different answer from this question, please inform me. i will delete this edited part):
i am now wanting to deploy my project from Microsoft Visual studio 2008. i have uninstalled previous Microsoft Visual C++ 2008 express edition. but when i am trying to install Microsoft Visual studio 2008, it says
Installation Requirements:
A compatible version of Visual Studio 2008 was not detected on the
system. This update is designed for only the Microsoft Visual Studio
2008 (ENU) product family, and is not compatible with any Express
editions.
guys, have you any idea what to do?
From what I see this download is 9.0.21022.8: http://www.microsoft.com/en-us/download/details.aspx?id=29
I don't know about VS Express, in VS full version there are the vcredist_x86/x64/arm.exe available in the install directory (For VS2012: .../Microsoft Visual Studio 11.0\VC\redist\1033)
If it's acceptable for you, the simplest way to forget about this problems you can statically link with Runtime by changing your project properties: C/C++ -> Code Generation -> Runtime Library, select /MT or /MTd. Runtime library will be included into your executable so you won't have to install it on client machine.