GraphLab Create "ImportError: No module named graphlab" - python-2.7

I followed these instructions to set up GraphLab on my Ubuntu machine. At the end, I opened Python 2.7.6 and ran the first of the test lines import graphlab as gl. This gave me
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named graphlab
How can I begin to diagnose this?
Details:
I ran python -V from a terminal, and it returned me Python 2.7.6.
In /usr/bin I find the following pyth* entries ... I wonder if something somewhere pointed at the wrong version:
python python2.7-config python3.4 python-config
python2 python2-config python3.4m pythontex
python2.7 python3 python3m pythontex3

The Dato Graphlab Create installer did not actually install graphlab on my Mac (El Capitan). I did the following (Anaconda is installed) in a terminal window:
% pip install graphlab-create
That subsequently installed Graphlab Create. You can then easily verify:
% python
Python 2.7.10 |Continuum Analytics, Inc.| (default, Sep 15 2015, 14:29:08)
[GCC 4.2.1 (Apple Inc. build 5577)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
Anaconda is brought to you by Continuum Analytics.
Please check out: http://continuum.io/thanks and https://anaconda.org
>>> import graphlab
>>>
I've noticed that occasionally, Python will forget that Graphlab Create is installed. A repeat of the above 'pip' command will cause it to remember.
python anaconda graphlab

Another option is to use virtualenvwrapper for the easy creation and application of virtual environments. For example, following this documentation, start with installation:
sudo pip install virtualenvwrapper
Open your .bashrc settings file, for example run gedit .bashrc and append the following lines to the bottom of it:
export WORKON_HOME=$HOME/.virtualenvs
export PROJECT_HOME=$HOME/Devel
source /usr/local/bin/virtualenvwrapper.sh
Restart your terminal window, and then you can make your virtual environment, say call it "test":
mkvirtualenv test
Now test is a virtual environment, and your are in it (i.e., test is "activated" currently). To put GraphLab in test,
pip install graphlab-create
Similarly, you can install other python toolkits in test by using pip, and any python program you run from within test will be able to see only the python toolkits that are installed here.

Maybe you should install graphlab in virtualenv.
1.Ensure your system has virtualenv installed. To verify, execute pip freeze. To install, execute sudo pip install virtualenv in your terminal before proceeding
2.Copy and execute the following commands in your terminal. This will create a virtual environment called 'graphlab' and install graphlab create version 0.9.1
virtualenv graphlab
. graphlab/bin/activate
pip install graphlab-create==0.9.1

You may need to activate the conda env by running
source activate dato-env
inside the terminal

Check your system path
import sys
print sys.path
It should contain graphlab-0.9.1. If not, then something was odd with our installation. I recommend using a virtual environment in python.

I had the same problem on ubuntu 16 desktop. The solution for me was pretty simple. After you start the notebook using
(gl-env) davis#smeagol:~/progs/ml-foundations$ jupyter notebook
Click the file navigator to locate your notebook where you do the import graphlab which causes the error. When it starts the notebook I imagine you see |Python [Root] in the top right. To fix this, click the title bar Kernel->Change kernel->gl-env. Now the top right label should say |Python [gl-env]. Afterwards when you run the notebook import graphlab will work.
There is a tab on the intial landing page of the Jupyter UI which has Conda. In that you can see two env's named root and gl-env. I've tried to delete the root one and even though its not the default all my notebooks start up with that environment and deleting it causes an internal error.

Graphlab is not supported on python3. Install Python 2.7 as mentioned in
https://conda.io/docs/user-guide/tasks/manage-python.html

If you don't see graphlab, simply the path of the environment is not set on "dato-env" (rather it may be set on "root")
If you use "Launcher" application, on top left set "Environment" to "dato-env".

Well,I guess the thread is dead.
After tinkering w/ un/reinstallations a couple times, the only way I can get "import graphlab" to work reliably is to manually activate dato-env.
Open your terminal and type below command
source activate dato-env
Prior to this close all the jupyter notebook. I ascertain that dato-env is in effect when my bash prompt changes to: (dato-env) pydev#smruti:~$
Now on your Jupyter notebook try to do import graphlab,this will execute without showing import error.
Hope this helps!!

I had the same problems, but then I found that in the files that come along with the Machine Learning specialization (https://www.coursera.org/learn/ml-foundations/notebook/lGQH5/open-your-notebook-workspace-to-follow-along) there are some additional codes after which you don't get any errors:
import graphlab
Set product key on this computer. After running this cell, you will not need to re-enter your product key.
graphlab.product_key.set_product_key('your product key here')
Limit number of worker processes. This preserves system memory, which prevents hosted notebooks from crashing.
graphlab.set_runtime_config('GRAPHLAB_DEFAULT_NUM_PYLAMBDA_WORKERS', 4)
Output active product key.
graphlab.product_key.get_product_key()

I had the same problem. I follow these steps.
1.Install Anaconda 2.7 version. Then I created vitual environment and selected python 2.7 version.
2.After create virtual environment open terminal in and run pip install notebook.
3.Then I registered https://turi.com/ because Graphlab Create requires an academic license to use.Run the following command that is given by after registration in terminal.
pip install --upgrade --no-cache-dir https://get.graphlab.com/GraphLab-Create/2.1/your registered email address here/your product key here/GraphLab-Create-License.tar.gz
4.Run jupyter notebook.
5.import graphlab
6.Then I got an error.So i run graphlab.get_dependancies() command. After that restarted the kernel.
7.After above all steps I typed import graphlab again.
8.It executed without errors.

Related

ImportError: No module named 'django' despite having it installed running apache2 server

I know that many have posted similar question however I tried most solution without success.
I'm trying to host a webpage with apache2 and django in python3.
In the error log I found ImportError: No module named 'django' when accessing the wsgi.pyfile, where I also added import sys, sys.version to confirm which python version is used and from the error log I can see that I'm running following python version 3.5.2 (default, Nov 23 2017, 16:37:01) [GCC 5.4.0 20160609].
When I run python3.5 I see that I uses the same python version and here I can run import django without any error!
EDIT: I checked django.__file__and saw that it was located in /home/USERNAME/.local/lib/python3.5/site-packages/django/init.py and that path /home/USERNAME/.local/lib/python3.5/site-packages wasn't in the sys.path that tried to run django. But adding it with sys.path.append(path) didn't help :(
Any thoughts what I might have messed up?
If you have Setup the whole configuration in VirtualEnv then , i suggest you to activate it by,
source /location to /env/bin activate
pip3 install django=version_id
or pip install django=version id
if you want to pass version id then its good or it will install the latest django from your repo.
Now test Django Version there.
Hope you will no get the error.
Location - means the path where env will be located in project directory, if you have followed the standard installation process of django or else you don't need, and version id- vesion of django framework.
I finally understood how to solve it! first I had to run pip3 uninstall django then run sudo pip3 install django.

ImportError: Couldn't import Django

I've already configured virtualenv in pycharm, when using the python manage.py command, this is error shown:
E:\video course\Python\code\web_worker\MxOnline>python manage.py runserver
Traceback (most recent call last):
File "manage.py", line 17, in <module>
"Couldn't import Django. Are you sure it's installed and "
ImportError: Couldn't import Django. Are you sure it's installed and available on your PYTHONPATH environment variable? Did you forget to activate a virtual environment?
How should I fix it, I've installed django.
I think the best way to use django is with virtualenv it's safe and you can install many apps in virtualenv which does not affect any outer space of the system
vitualenv uses the default version of python which is same as in your system
to install virtualenv
sudo pip install virtualenv
or for python3
sudo pip3 install virtualenv
and then in your dir
mkdir ~/newproject
cd ~/newproject
Now, create a virtual environment within the project directory by typing
virtualenv newenv
To install packages into the isolated environment, you must activate it by typing:
source newenv/bin/activate
now install here with
pip install django
You can verify the installation by typing:
django-admin --version
To leave your virtual environment, you need to issue the deactivate command from anywhere on the system:
deactivate
When you install Django on your computer all things go fine but when you install a Virtual environment it gets separated from all things. You will know it's importance when you will make a final project and deploy it to any cloud or hosting.
Just reinstall Django in the virtual environment and baam:
pip install Django
and then just run the command for testing:
python manage.py runsever
and you are all done.
You need to install Django, this error is giving because django is not installed.
pip install django
You need to use both commands:
pip install django and pip3 install django
that worked for me
Check that you have installed Django; by executing import django in python.
you mustn't see ModuleNotFoundError if everything's ok.
Check that you have installed virtualenv; by executing virtualenv --version.
you must see the version number if everything's ok.
Check that you have enabled virtualenv; there's got to be the name of your virtualenv in your command prompt starting line. enable it by
source bin/activate. also, remember to deactivate it every time your job is
finished with the virtualenv.
Check that your virtualenv includes django. a virtualenv by default
has no modules installed. you either have to install django in your
virtualenv (even if you have it in your machine already) or use
virtualenv --system-site-packages when creating a virtualenv to
include system site packages in the virtualenv.
Add django to your path. open python, import django, then run
django to see django's path. then add it to your ~/.bashrc (or
~/.zshrc if you're using zsh). more info in here
Install django-admin by running pip install django-admin
find your django parent dir path and add it to PYTHONPATH
In my case, my django parent dir path is /Library/Python/3.7/site-packages,add this line into ~/.bash_profile
export PYTHONPATH=/Library/Python/3.7/site-packages
else if you have PYTHONPATH already, just append it like this
export PYTHONPATH=${PYTHONPATH}:/Library/Python/3.7/site-packages
then
source ~/.bash_profile
I was having great difficulties with this but I have solved my issue. I am on Windows 10 using Vagrant ssh in my virtualenv environment, the box I have installed is ubuntu/xenial64, Django version 2.1, python==3.6.
When I was installing packages I was using pip3 but most importantly I was using sudo and the -H flag to install these packages. When I ran sudo pip3 freeze my packages would come up, but when I ran a plain pip3 freeze there would be no packages.
Then I tried the python3 manage.py startapp <YOUR APP NAME> and it did not work same error as you.
I finally thought to try sudo python3 manage.py startapp <YOUR APP NAME> it finally worked!
Hope this was help :)
I faced the same issue, and in my case it was because I had multiple python versions on my machine, in addition to the Anaconda ones.
In my case django didn't worked well with my anaconda python.
I knew that when I run import django on each python terminal for all versions I have.
As a summary here are the steps I made to get this solved:
Run the CMD as Admin
Create a project folder.
Create a new ENV for this new project INSIDE THE PROJECT Folder...
pip install virtualenv >> virtualenv new_env`
Activate it:
.\new_env\Scripts\activate`
After the env activation ⇒ Install Django:
python -m pip install Django
The python version you used here in step 5 will determine which python will to work with this installed Django.
If you are working on a machine where it doesn't have permissions to all the files and moreover you have two versions such as default 2.7 & latest 3.6 then while running the command use the python version with the command. If the latest python is installed with sudo then run the command with sudo.
exp:
sudo python3.6 manage.py runserver
after activating virtual env that error raises up on ubuntu.
and I solve this issue just by typing again :
pip3 install Django
inside the directory which is I want to create a new app.
You can use python3 to run file, if you don't want to use virtualenv.python3 manage.py runserver
To install python3 look at this page
Make sure you have Django installed by writing this command :
python -m django --version
if it's not installed you can install it by writing this command :
pip install django
I solved this problem in a completely different way.
Package installer = Conda (Miniconda)
List of available envs = base, djenv(Django environment created for keeping project related modules).
When I was using the command line to activate the djenv using conda activate djenv, the base environment was already activated. I did not notice that and when djenv was activated, (djenv) was being displayed at the beginning of the prompt on the command line. When i tired executing , python manage.py migrate, this happened.
ImportError: Couldn't import Django. Are you sure it's installed and available on your PYTHONPATH environment variable? Did you forget to activate a virtual environment?
I deactivated the current environment, i.e conda deactivate. This deactivated djenv. Then, i deactivated the base environment.
After that, I again activated djenv. And the command worked like a charm!!
If someone is facing a similar issue, I hope you should consider trying this as well. Maybe it helps.
Instead of creating a new virtual environment, you just have to access to your initially created virtual environment when you started the project.
You just have to do the following in your command line:
1)pipenv shell to access the backend virtual environment that you have initially created.
2) Then, python manage.py runserver
Let me know if it works for you or not.
To create a virtual environment for your project, open a new command prompt, navigate to the folder where you want to create your project and then enter the following:
py -m venv project-name
This will create a folder called ‘project-name’ if it does not already exist and setup the virtual environment. To activate the environment, run:
project-name\Scripts\activate.bat**
The virtual environment will be activated and you’ll see “(project-name)” next to the command prompt to designate that. Each time you start a new command prompt, you’ll need to activate the environment again.
Install Django
Django can be installed easily using pip within your virtual environment.
In the command prompt, ensure your virtual environment is active, and execute the following command:
py -m pip install Django
In case you have virtual env activated, django installed, django-admin --version prints the valid version - check if there is no circular import in the file you are executing.
I faced the same problem when I was doing it on windows 10. The problem could be that the path is not defined for manage.py in the environment variables. I did the following steps and it worked out for me!
Go to Start menu and search for manage.py.
Right click on it and select "copy full path".
Go to your "My Computer" or "This PC".
Right click and select "Properties".
Select Advanced settings.
Select "Environment Variables."
In the lower window, find "Path", click on it and click edit.
Finally, click on "Add New".
Paste the copied path with CTRL-V.
Click OK and then restart you CMD with Administrator privileges.
I really hope it works!
Looks like you have not activated your virtualenv when using the runserver command.
Windows: <virtualenv dir>\Scripts\activate.bat
Linux: source <virtualenv dir>\bin\activate
You should see (name of virtualenv) as a prefix to your current directory:
(virtualenv) E:\video course\Python\code\web_worker\MxOnline>python manage.py runserver
windows :
(virtualenv dir)\Scripts\activate # this step to activate virtualenv
you should be in the dir of (project name)
python manage.py runserver
you need to go to the root directory
and run the below command
source bin/activate
Once the above command is executed, you will be able to create custom apps
I also face the same problem in windows 10 with anaconda
For me anaconda3\Scripts>activate
it's working good. What you have to do you just need to go to anaconda home
AppData\Local\Continuum\anaconda3\Scripts
and you need to open a cmd prompt and type activate.
It will activate the venv for you.
if you don't want to deactivate or activate the already installed venv just ensure you have set the pythonpath set
set pythonpath=C:\software\venv\include;C:\software\venv\lib;C:\software\venv\scripts;C:\software\venv\tcl;C:\software\venv\Lib\site-packages;
and then execute
"%pythonpath%" %venvpath%Scripts\mytestsite\manage.py runserver "%ipaddress%":8000
The problem is related to this error: Execution Policy Change
Start virtualenv by running the following command:
Command Line
C: \ Users \ Name \ yourdjangofilesname > myvenv \ Scripts \ activate
NOTE: On Windows 10, you may receive an error by Windows PowerShell that the implementation of these scenarios is disabled on this system. In this case, open another Windows PowerShell with the "Run as Administrator" option. After that, try typing the following commands before starting your virtual environment:
C:\WINDOWS\system32> set-executionpolicy remotesigned
Execution Policy Change:
The execution policy helps protect you from scripts that you do not trust. Changing the execution policy might expose you to the security risks described in the about_Execution_Policies help topic at http://go.microsoft.com/fwlink/?LinkID=135170.
Do you want to change the execution policy? [Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "N"): A
After selection Y(es), close the Powershell admin window, and then go back to the Powershell Window(where you got the error) and run the command again.
> myenv\Scripts\activate and then python manage.py runserver 8085 ,
(8085 or any number if you want to change its default port to work on otherwise you dont need to point out anything. )
I had same problem, I installed all dependencies with root access :
In your case:
sudo pip install django
In my case, I had all dependencies in requirements.txt, So:
sudo pip3 install -r requirements.txt
Just sync your pipenv environment with:
pipenv sync
I had this problem with Django 3.
On manage.py detail the execute_from_command_line import.
You should have:
from django.core.management import execute_from_command_line
Instead of
from django import execute_from_command_line
I had the same problem and my solution was not posted here:
How I got the error
My error came whenever I was installation the requirements.txt file with pip (let's say from cloning a git repository).
Solution
I manually installed each of the modules in the requirements.txt + any other module needed for the installation of those modules (e.g: I got errors and some modules where missing to install other modules so I had to add them too).
If there is anyone who faced with the same problem when using virtual environment and running on MacOS, just try
sudo python manage.py startapp <project_name>
instead of
python manage.py startapp <project_name>
It will solve the problem suprisingly!
I had to install django using the virtual environment pip3 executable directly:
cd [virtual environment folder]/bin
sudo ./pip3 install django
If you already installed Django / configured virtualenv and you still having the error:
ImportError: Couldn't import Django. Are you sure it's installed and
available on your PYTHONPATH environment variable?
Try to run the command pipenv shell before start the server with py manage.py runserver

Not able to Install Gmplot in python Anaconda

I want to install gmplot on Anaconda ( I am user 64 bit Windows 10)
https://anaconda.org/mlgill/gmplot
run below command:
conda install -c mlgill gmplot=1.1.1
But I get this error message:
PackageNotFoundError: Package not found: '' Package missing in current
win-64 channels:
- gmplot 1.1.1*
Go to Python console in Anaconda .
Use
pip install gmplot
Hello Mayank Khandelwal,
As you send the link is of OSX, for windows you can use below github link.
https://github.com/vgm64/gmplot
Use setup.py to install.
#Zap, after installation, you need to import the library before you can use it. Here is a simple flow. Open an Anaconda Prompt then type following commands
pip install gmplot
once installation is finished. Then launch a python console and import the library,
import gmplot
now you can use it directly as you want. For example,
import gmplot
# Create the map plotter:
gmap = gmplot.GoogleMapPlotter(37.766956, -122.448481, 14, apikey=apikey)

ImportError: 'No module named plotly.plotly' in LinuxMint17.3

Whenever I am trying to compile the following code to get a line graph shows some errors. But I don't know how to fix it. Here is my code :
import plotly.plotly as py
import plotly.graph_objs as go
# Create random data with numpy
import numpy as np
N = 500
random_x = np.linspace(0, 1, N)
random_y = np.random.randn(N)
# Create a trace
trace = go.Scatter(
x = random_x,
y = random_y
)
data = [trace]
py.iplot(data, filename='basic-line')
Shows the following error :
mks#mks-H81M-S /media/mks/KUTUBUDDIN1/test $ python datdaPlot.py
Traceback (most recent call last):
File "datdaPlot.py", line 1, in <module>
import plotly.plotly as py
ImportError: No module named plotly.plotly
mks#mks-H81M-S /media/mks/KUTUBUDDIN1/test $
How can this be fixed?
Added:
According to Spandan Brahmbhatt, I have installed pip by sudo pip install plotly. But still shows the following error:
You will need to install them first.
pip install plotly
pip install cufflinks
In my case I wanted to use in a Jupyter Notebook in Windows 10 but was getting the same error
ModuleNotFoundError Traceback (most recent call last)
in
----> 1 import plotly.express as px
ModuleNotFoundError: No module named 'plotly'
Considering you can also install Anaconda in Linux Mint and these came with Anaconda (in my case), if you decide to go with Anaconda you'll have at least two options to install plotly
Anaconda Prompt
Anaconda Navigator
Once installed, you'll be able to use it without any problem
1. Anaconda Prompt
Open Anaconda Prompt
Run the following command
conda install -c plotly plotly=4.8.1
2. Anaconda Navigator
Open Anaconda Navigator
Inside of it, go to Environment, select All in the dropdown and search for plotly.
Then select plotly from that list and click Apply.
I had the same problem. I accidentally was using a file in my working directory named ploylt.py. I removed that file form the directory and it works fine now.
First make sure that you have installed plotly
pip install plotly
(Test) Open an empty file, type
import plotly
and save it with a .py extension. Then run it. If this works, then your installation was ok. Move any other file named plotly (with any extension) in a different directory
It will hopefully work.
Based on ImportError: No module named plotly.plotly, I assume you have not installed plotly module.
You can install it using pip
$ pip install plotly
or
$ sudo pip install plotly
Use this:
conda install -c https://conda.anaconda.org/plotly plotly
Firstly, I'm new to plotly 2, and I am not sure I can make you understand since I'm a Chinese.
Anyway, you can try this, for me, it works:
import plotly
plotly.offline.init_notebook_mode(connected=True)
import plotly.offline as py
import plotly.plotly as py: this command will communicate with a Plotly Cloud or Plotly Enterprise. get_figure downloads a figure from plot.ly or Plotly Enterprise. You need to provide credentials to download figures: Getting Started with Plotly for Python
Refer:
Why Python line plot shows : Don't have an account? plot.ly
If you are using jupyter notebook in windows, then open the Anaconda Powershell Prompt(better to open in admin mode) and use the below command.
pip install plotly
pip install cufflinks
If you are using python from command prompt or which is set in the Environment variable then open the command prompt and use the same command mentioned above.
Both use different instance of python. So, if you use the above mentioned pip command in Anaconda PowerShell than it will install the libraries(plotly and cufflinks) in the python folder that comes with anaconda package but not in the python folder that you are using form the command prompt or which is set in the Environment variable.
I had the same problem. I found the solution by going through the directories.
pip install is installing in default python lib folder, all you have to do is copy the plotly folder from python lib to jupyter notebook lib folder. Since I am using windows the directories were as following :
c:\python34\lib\site-packages
c:\Anacoda3\Lib\site-packages
In case you searched around like I did until I found the link below, but looked here first, hopefully this will save you some frustration.
Delete the plotly.py file in your root folder. The one you created to test the get started code.
After you do that you'll be searching for a while again unless you delete the .pyc file (and get the ImportError: bad magic number in 'plotly': b'\x03\xf3\r\n').
https://github.com/plotly/plotly.py/issues/723
I was also having the same issue, but then it was due to different versions of python.
You might want to try the following command as well: (assuming you have python3 installed)
sudo pip3 install plotly
pip3 install plotly --upgrade
python3 <filename.py>
Please ensure that all the packages that are being used are installed for one python version only. As in my case all packages were installed for python3 but then I was trying to run my code with "python filename.py" and somehow that did not work.
Moreover, I also setup the credentials by following the link: https://plot.ly/settings/api. Register yourself using the link https://plot.ly/settings/api. Then create a file ~/.plotly/.credentials with your username and authentication key.
Hi I ran into something similar on my PC and here is what I advise you to do because it worked for me:
Open your Anaconda Prompt and run pip install plotly==4.1.1 cufflinks
Note that the 4.1.1 here is the version of plotly.
Installation:
Terminal:
- You can find more information about both plotly and cufflinks here.
Anaconda, Jupyter Notebook and Visual Studio Code:
- I believe I ran into this error because I did not install plotly on my PC so you can find more information on various ways of installing plotly here.
Like #Ananada, I had named my test file "plotly.py", i.e. the one containing the import plotly.graph_objects as go statement. So Python was trying to import the module from the script file I was running. Doh! Renamed it and problem solved.
To install plotly:
conda install -c plotly plotly
To check whether the installation was successful:
python3 -m pip show plotly
This shows the version of plotly installed in case of successful installation.
This worked for me!
Activate your environment again after installing the package if you are using a virtual environment.
Do source bin/activate if using bash. See https://docs.python.org/3/tutorial/venv.html.
Check your folder ... If this a temporary/test folder, maybe just like me you are wasting your whole day trying to understand why you cannot import .... .. ..
Maybe, just like happened to me - you have ANOTHER plotly.py file in your folder. Yes, that one.
Actually the module plotly is not pre-installed and we need it to be installed on our machines before using. It can be installed by using pip command :
pip install plotly
Also, we can install cufflinks. Cufflinks are smart plots.
pip install cufflinks
When you will get an error using anaconda navigator plotly install.
Go to the particular environment in Anaconda Navigator.
Then open terminal for the environment.
Install the packages.
On my Laptop, I had to use this code
!pip install pip plotly
Installing the "!" is key for my installation
All the best

import unicodecsv fails in jupyter

I tried to run
import unicodecsv
within jupyter by running a .ipynb file.
It failed.
Then I installed the unicodecsv file through the python install command and found it within c\python27 dir. But still the import did not happen.
How should it be installed. Does it need to be placed within the anaconda installation
Edit :
Error displayed -
---------------------------------------------------------------------------
ImportError Traceback (most recent call last)
<ipython-input-1-9c1521d8df38> in <module>()
2 # 1 #
3 #####################################
----> 4 import unicodecsv
5 ## Read in the data from daily_engagement.csv and project_submissions.csv
6 ## and store the results in the below variables.
ImportError: No module named unicodecsv
Pip (Package Installer for Python) package manager also comes with Python3, you can try this variant without installing Conda (Windows):
python -m pip install unicodecsv
I had the same problem for the same file at Udacity.
Try changing the Kernel from Python2 to Python3 in the Kernel -> Change Kernel menu.
Hope that helps :)
You should install it (from the command prompt) using:
conda install unicodecsv
Install unicodecsv using:
sudo pip install unicodecsv
Restart/run your notebook again.
I had the same issue. Switching to Python 3 requires you to learn the new syntax and the rest of the nanodegree uses Python 2.
Make sure you are running the notebook in the same environment you are installing the the unicodecsv package in. Then:
conda install unicodecsv
should work. It did for me.