I know why and how virtual methods work, and most of the time people tell me I should always mark a method virtual, but, I don't understand why if I'm not going to override it. And I also know there's a tiny memory issue.
Please explain me why I should mark all methods virtual and what's the trade-off.
Code example:
class Point
{
int x, y;
public:
virtual void setX(int i);
virtual void setY(int i);
};
(That question is not equal to Should I mark all methods virtual? because I want to know the trade-off and because the programming language in the case is C++, not C#)
OBS: I'm sorry if there's any grammar error, English is not my native language.
No, you should not "mark all methods as virtual".
If you want the method to be virtual, then mark it as such. If not, leave the keyword out.
There is an overhead for virtual methods compared to regular ones. If you want to read more about this, check out the Wikipedia side about VTables.
The real reason to make member functions non-virtual is to enforce class invariants.
Advice to make all member functions virtual generally means that either:
The people giving the advice don't understand the class, or
the people giving the advice don't understand OO design.
Yes, there are a few cases (e.g., some abstract base classes, where the only class invariant is the existence of specific functions) in which all the functions should be virtual. Those are the exception though. In most classes, virtual functions should be restricted to those that you really intend to allow derived classes to provide new/different behavior.
As for the discussion of things like vtables and the overhead of virtual function calls, I'd say they're correct as far as they go, but they miss the really big point. Whether a particular function should or shouldn't be virtual is primarily a question of class design and only secondarily a question of function call overhead. The two don't do the same thing, so trying to compare overhead rarely makes sense.
That is not the case, ie, if you dont need a virtual function then dont use it. Also as per Bjarne Stroustrup Pay per use
In C++: --
Virtual functions have a slight performance penalty. Normally it is too small to make any difference but in a tight loop it might be
significant.
A virtual function increases the size of each object by one pointer. Again this is typically insignificant, but if you create
millions of small objects it could be a factor.
Classes with virtual functions are generally meant to be inherited from. The derived classes may replace some, all or none of the
virtual functions. This can create additional complexity and
complexity is the programmers mortal enemy. For example, a derived
class may poorly implement a virtual function. This may break a part
of the base class that relies on the virtual function.
One of C++'s basic principles is that you don't pay for what you don't need. virtual functions cost more than normal member functions in both time and space. Therefore you shouldn't always use them irregardless of whether or not you'll actually ever need them or not.
Making methods virtual has slight costs (more code, more complexity, larger binaries, slower method calls), and if the class is not inherited from it brings no benefit. Classes need to be designed for inheritance, otherwise inheriting from them is just begging to shoot yourself in the foot. So no, you should not always make every method virtual. The people who tell you this are probably just too inheritance-happy.
It is not true that all functions should be marked as virtual.
Indeed, there's a pattern for enforcing pre/postconditions which explicitly requires that public members are not virtual. It works as follows:
class Whatever
{
public:
int frobnicate(int);
protected:
virtual int do_frobnicate(int);
};
int Whatever::frobnicate(int x)
{
check_preconditions(x);
int result = do_frobnicate(x);
check_postconditions(x, result);
return result;
}
Since derived classes cannot override the public function, they cannot remove the pre/postcondition checks. They can, however, override the protected do_frobnicate which does the actual work.
(Edit - I got to this question by way of a duplicate C# question, but the answer is still useful, I think! Edited to reflect that:)
Actually, C# has a good "official" reason: https://learn.microsoft.com/en-us/dotnet/csharp/programming-guide/classes-and-structs/versioning-with-the-override-and-new-keywords
The first sentence there is:
The C# language is designed so that versioning between base and derived classes in different libraries can evolve and maintain backward compatibility.
So if you're writing a class and it's possible end-users will make derived classes, and it's possible different versions will get out of sync...all of a sudden it starts to be important. If you have carefully protected core aspects of your code, then if you update things, people can still use the old derived class (hopefully).
On the other hand, if you are okay with no one being able to used derived classes until their authors have updated to your newest version, everything can be virtual. I have seen this scenario in several "early access" games that allow modding - when the game version increases, all of a sudden a lot of mods are broken because they relied on things working one way...and they changed. (Okay, not all changes are related to this, but some are.)
It really depends on your usage scenario. If people can keep using your old version, maybe they don't care if you've updated it and are happy to keep using it with their derived classes. In a large business scenario, making everything virtual may very well be a recipe for breaking many things at once when someone updates something.
Does this apply to C++ as well? I don't see why not - C++ is also used for massive projects and would also face the dangers of multiple simultaneous versions.
Related
Is there any real reason not to make a member function virtual in C++? Of course, there's always the performance argument, but that doesn't seem to stick in most situations since the overhead of virtual functions is fairly low.
On the other hand, I've been bitten a couple of times with forgetting to make a function virtual that should be virtual. And that seems to be a bigger argument than the performance one. So is there any reason not to make member functions virtual by default?
One way to read your questions is "Why doesn't C++ make every function virtual by default, unless the programmer overrides that default." Without consulting my copy of "Design and Evolution of C++": this would add extra storage to every class unless every member function is made non-virtual. Seems to me this would have required more effort in the compiler implementation, and slowed down the adoption of C++ by providing fodder to the performance obsessed (I count myself in that group.)
Another way to read your questions is "Why do C++ programmers do not make every function virtual unless they have very good reasons not to?" The performance excuse is probably the reason. Depending on your application and domain, this might be a good reason or not. For example, part of my team works in market data ticker plants. At 100,000+ messages/second on a single stream, the virtual function overhead would be unacceptable. Other parts of my team work in complex trading infrastructure. Making most functions virtual is probably a good idea in that context, as the extra flexibility beats the micro-optimization.
Stroustrup, the designer of the language, says:
Because many classes are not designed to be used as base classes. For example, see class complex.
Also, objects of a class with a virtual function require space needed by the virtual function call mechanism - typically one word per object. This overhead can be significant, and can get in the way of layout compatibility with data from other languages (e.g. C and Fortran).
See The Design and Evolution of C++ for more design rationale.
There are several reasons.
First, performance: Yes, the overhead of a virtual function is relatively low seen in isolation. But it also prevents the compiler from inlining, and that is a huge source of optimization in C++. The C++ standard library performs as well as it does because it can inline the dozens and dozens of small one-liners it consists of. Additionally, a class with virtual methods is not a POD datatype, and so a lot of restrictions apply to it. It can't be copied just by memcpy'ing, it becomes more expensive to construct, and takes up more space. There are a lot of things that suddenly become illegal or less efficient once a non-POD type is involved.
And second, good OOP practice. The point in a class is that it makes some kind of abstraction, hides its internal details, and provides a guarantee that "this class will behave so and so, and will always maintain these invariants. It will never end up in an invalid state".
That is pretty hard to live up to if you allow others to override any member function. The member functions you defined in the class are there to ensure that the invariant is maintained. If we didn't care about that, we could just make the internal data members public, and let people manipulate them at will. But we want our class to be consistent. And that means we have to specify the behavior of its public interface. That may involve specific customizability points, by making individual functions virtual, but it almost always also involves making most methods non-virtual, so that they can do the job of ensuring that the invariant is maintained. The non-virtual interface idiom is a good example of this:
http://www.gotw.ca/publications/mill18.htm
Third, inheritance isn't often needed, especially not in C++. Templates and generic programming (static polymorphism) can in many cases do a better job than inheritance (runtime polymorphism). Yes, you sometimes still need virtual methods and inheritance, but it is certainly not the default. If it is, you're Doing It Wrong. Work with the language, rather than try to pretend it was something else. It's not Java, and unlike Java, in C++ inheritance is the exception, not the rule.
I'll ignore performance and memory cost, because I have no way to measure them for the "in general" case...
Classes with virtual member functions are non-POD. So if you want to use your class in low-level code which relies on it being POD, then (among other restrictions) any member functions must be non-virtual.
Examples of things you can portably do with an instance of a POD class:
copy it with memcpy (provided the target address has sufficient alignment).
access fields with offsetof()
in general, treat it as a sequence of char
... um
that's about it. I'm sure I've forgotten something.
Other things people have mentioned that I agree with:
Many classes are not designed for inheritance. Making their methods virtual would be misleading, since it implies child classes might want to override the method, and there shouldn't be any child classes.
Many methods are not designed to be overridden: same thing.
Also, even when things are intended to be subclassed / overridden, they aren't necessarily intended for run-time polymorphism. Very occasionally, despite what OO best practice says, what you want inheritance for is code reuse. For example if you're using CRTP for simulated dynamic binding. So again you don't want to imply your class will play nicely with runtime polymorphism by making its methods virtual, when they should never be called that way.
In summary, things which are intended to be overridden for runtime polymorphism should be marked virtual, and things which don't, shouldn't. If you find that almost all your member functions are intended to be virtual, then mark them virtual unless there's a reason not to. If you find that most of your member functions are not intended to be virtual, then don't mark them virtual unless there's a reason to do so.
It's a tricky issue when designing a public API, because flipping a method from one to the other is a breaking change, so you have to get it right first time. But you don't necessarily know before you have any users, whether your users are going to want to "polymorph" your classes. Ho hum. The STL container approach, of defining abstract interfaces and banning inheritance entirely, is safe but sometimes requires users to do more typing.
The following post is mostly opinion, but here goes:
Object oriented design is three things, and encapsulation (information hiding) is the first of these things. If a class design is not solid on this, then the rest doesn't really matter very much.
It has been said before that "inheritance breaks encapsulation" (Alan Snyder '86) A good discussion of this is present in the group of four design pattern book. A class should be designed to support inheritance in a very specific manner. Otherwise, you open the possibility of misuse by inheritors.
I would make the analogy that making all of your methods virtual is akin to making all your members public. A bit of a stretch, I know, but that's why I used the word 'analogy'
As you are designing your class hierarchy, it may make sense to write a function that should not be overridden. One example is if you are doing the "template method" pattern, where you have a public method that calls several private virtual methods. You would not want derived classes to override that; everyone should use the base definition.
There is no "final" keyword, so the best way to communicate to other developers that a method should not be overridden is to make it non-virtual. (other than easily ignored comments)
At the class level, making the destructor non-virtual communicates that the class should not be used as a base class, such as the STL containers.
Making a method non-virtual communicates how it should be used.
The Non-Virtual Interface idiom makes use of non-virtual methods. For more information please refer to Herb Sutter "Virtuality" article.
http://www.gotw.ca/publications/mill18.htm
And comments on the NVI idiom:
http://www.parashift.com/c++-faq-lite/strange-inheritance.html#faq-23.3
http://accu.org/index.php/journals/269 [See sub-section]
I was interviewed by a financial company and was asked this question:
"List the case(s) when you prefer virtual functions over templates?"
It sounds weird for me, because usually we are aiming the opposite right?
All the books, articles, talks are there encouraging us to use static polymorphism instead of dynamic.
Are there any known cases I was not aware of when you should use virtual functions and avoid templates?
GUI / visualization widget toolkits are an obvious case. Re-implementing a draw method, for example, is certainly less cumbersome with virtual methods and dynamic dispatch. And since modern C++ tends to discourage raw pointer management, std::unique_ptr can manage the resource for you.
I'm sure there are plenty of other hierarchical examples you can come up with... a base enemy class for a game, with virtual methods handling the behaviour of various baddies:)
The whole 'overhead' argument for dynamic dispatch is completely without merit today. I'd argue that the vtable indirection implementation hasn't been a significant overhead for serious workloads in decades. There's the more interesting question that if C++ was designed today, would polymorphism be part of the language? But that's neither here nor there now.
I don't like the chances of this question remaining open, as it's not a direct programming problem and is probably too subject to opinions. It might be a better question for software engineering.
When the type of the object is not known at compile time, use virtual methods.
e.g.
void Accept (Fruit* pFruit) // supplied from external factors at runtime
{
pFruit->eat(); // `Fruit` can be anyone among `Apple/Blackberry/Chickoo/`...
}
Based on what user enters, a fruit will be supplied to the function. Hence, there is no way we can figure out that what is going to be eat(). So it's a candidate for runtime polymorphism:
class Fruit
{
public: virtual void eat () = 0;
}
In all the other cases, always prefer static polymorphism (includes templates). It's more deterministic and easy to maintain.
Interview question seems to asking for preference (& your reasoing).
I would prefer interfaces (virtual methods) for ease of creating mocks for unit testing. We can use template for these, but it is cumbersome (consumer has to be templated). If profiling shows no speed degradation with vtable lookups, prefer that over mocking/testing non-virtual methods.
Also, type erasure. I don't think it can be implemented at all using templates. Type erasure can be roughly thought of as void ptr and function pointers, which can be implemented easily using interfaces + virtual methods.
Templates need code implementation to be made available. I believe virtual methods of an interface can be invoked on a child ptr with just its binary (object) file.
Not sure if code bloat with template is an issue with modern compilers, but if executable size increases significantly, that could be an issue in embedded systems with limited memory and these would not prefer to use templates.
In C++, a coder doesn't know whether other coders will inherit his class. Should he make every function in that class virtual? Are there any drawbacks? Or is it just not acceptable at all?
In C++, you should only make a class inheritable from if you intend for it to be used polymorphically. The way that you treat polymorphic objects in C++ is very different from how you treat other objects. You don't tend to put polymorphic classes on the stack, or pass them by or return them from functions by value, since this can lead to slicing. Polymorphic objects tend to be heap-allocated, be passed around and returns by pointer or by reference, etc.
If you design a class to not be inherited from and then inherit from it, you cause all sorts of problems. If the destructor isn't marked virtual, you can't delete the object through a base class pointer without causing undefined behavior. Without the member functions marked virtual, they can't be overridden in a derived class.
As a general rule in C++, when you design the class, determine whether you want it be inherited from. If you do, mark the appropriate functions virtual and give it a virtual destructor. You might also disable the copy assignment operator to avoid slicing. Similarly, if you want the class not to be inheritable, don't give it any of these functions. In most cases it's a logic error to inherit from a class that wasn't designed to be inherited from, and most of the times you'd want to do this you can often use composition instead of inheritance to achieve this effect.
No, not usually.
A non-virtual function enforces class-invariant behavior. A virtual function doesn't. As such, the person writing the base class should think about whether the behavior of a particular function is/should be class invariant or not.
While it's possible for a design to allow all behaviors to vary in derived classes, it's fairly unusual. It's usually a pretty good clue that the person who wrote the class either didn't think much about its design, lacked the resolve to make a decision.
In C++ you design your class to be used either as a value type or a polymorphic type. See, for example, C++ FAQ.
If you are making a class to be used by other people, you should put a lot of thought into your interface and try to work out how your class will be used. Then make the decisions like which functions should be virtual.
Or better yet write a test case for your class, using it how you expect it to be used, and then make the interface work for that. You might be surprised what you find out doing it. Things you thought were absolutely necessary might turn out to be rarely needed and things that you thought were not going to be used might turn out to be the most useful methods. Doing it this way around will save you time not doing unnecessary work in the long run and end up with solid designs.
Jerry Coffin and Dominic McDonnell have already covered the most important points.
I'll just add an observation, that in the time of MFC (middle 1990s) I was very annoyed with the lack of ways hook into things. For example, the documentation suggested copying MFC's source code for printing and modifying, instead of overriding behavior. Because nothing was virtual there.
There are of course a zillion+1 ways to provide "hooks", but virtual methods are one easy way. They're needed in badly designed classes, so that the client code can fix things, but in those badly designed classes the methods are not virtual. For classes with better design there is not so much need to override behavior, and so for those classes making methods virtual by default (and non-virtual only as active choice) can be counter-productive; as Jerry remarked, virtuals provide opportunites for derived classes to screw up.
There are design patterns that can be employed to minimize the possibilities of screw-ups.
For example, wrapping internal virtuals in exposed non-virtual methods with sanity checks, and, for example, using decoupled event handling (where appropriate) instead of virtuals.
Cheers & hth.,
When you create a class, and you want that class to be used polymorphically you have to consider that the class has two different interfaces. The user interface is defined by the set of public functions that are available in your base class, and that should pretty much cover all operations that users want to perform on objects of your class. This interface is defined by the access qualifiers, and in particular the public qualifier.
There is a second interface, that defines how your class is to be extended. At that level you have to think on what behavior you want to be overridden by extending classes, and what elements of your object you want to provide to extending classes. You offer access to derived classes by means of the protected qualifier, and you offer extension points by means of virtual functions.
You should try to follow the Non-Virtual Interface idiom whenever possible. That idiom (google for it) basically tries to fully separate the two interfaces by not having public virtual functions. Users call non-virtual functions, and those in turn call on configurable functionalities by means of protected/private virtual functions. This clearly separates extension points from the class interface.
There is a single case, where virtual has to be part of the user interface: the destructor. If you want to offer your users the ability to destroy derived objects through pointers to the base, then you have to provide a virtual destructor. Else you just provide a protected non-virtual one.
He should code the functions as it is, he shouldn't make them virtual at all, as in the circumstances specified by you.
The reasons being
1> The CLASS CODER would obviously have certain use of functions he is using.
2> The inherited class may or may not make use of these functions as per requirement.
3> Any function may be overwritten in derived class without any errors.
I need to finish others developer work but problem is that he started in different way...
So now I found in situation to use existing code where he chooses to inherit a non-abstract class (very big class, without any virtual functions) that already implements bunch of interfaces or to dismiss that code (which shouldn't be to much work) and to write another class that implements interfaces I need.
What are the pros and cons that would help me to choose the better approach.
p.s. please note that I don't have to much experience
Many Thanks
Although it is very tempting to say write it from scratch again, don't do it! The existing code may be ugly, but it looks like it does work. Since the class is big, I assume there is fair bit of history behind it as well. It might have solutions for some very obscure cases which you might not have imagined till now. What I suggest is, if possible first talk to the person who developed that class, understand how it works, then derive from it (after making its destructor virtual of course) and complete your work. Then as and when time permits slowly refactor the parts of the class into smaller more manageable classes. Also, don't forget to write a good unit-tester before you start so that you can validate the new behavior against the existing class's behavior. One more thing, there is nothing wrong in inheriting from a non-abstract base class as long as it makes sense and the base class destructor is virtual.
If the other developer has written a base-class with no virtual functions, then those functions do not need to be overridden, and it is correct to define them in a non-abstract base class.
If those functions define functionality that all the child-classes require then it would be a mistake to get rid of the base class, as you would then need to implement those functions individually in each of the child classes.
I've seen a lot of developers go 'interface-mad' in the last couple of years, but base classes still serve a function over interfaces - to provide a concrete implementation that is common to all child classes. It would be a mistake to get rid of the base class and have seperate implementations of these functions in each of the child classes.
HOWEVER, if the child classes are inheriting functionality that they do not require, or require a separate implementation of, then the Base class is a mistake and interfaces would seem like the better option to divide the functionality between the child classes.
Despite this, I would agree with Naveen that its probably not worth the extra work this will give you, it may seem simple, but if this is a big class with a lot of inheritors then it could turn out to be a nightmare. Quite often in Software Engineering you have to deal with another developer's code that you might have implemented differently. If you re-implemented it ever time you will be a very unproductive developer. I say work with what you've got and get the project finished on time.
Is there anything at all you want to use from the base class or would you end up overriding everything?
Does it define some sort of type that you want to use for an "is-a" relationship?
(for example, base class is "animal" and you want to make "cat", but if it doesn't add any behavior to its interface, that doesn't seem likely)
Is the base class used in other interfaces you need to use? (like if someone is passing objects through a reference/pointer to the base class)
If not, I'd say there's no advantage in inheriting from that class over implementing the interface(s) yourself.
What are the pros and cons that would help me to choose the better approach.
It's legal to derive from a class with no virtual functions, but that doesn't make it a good idea. When you derive from a class with virtual functions, you often use that class through pointers (eg., a class Derived that inherits from Base is often manipulated through Base*s). That doesn't work when you don't use virtual functions. Also, if you have a pointer to the base class, delete-ing it can lead to a memory leak.
However, it sounds more like these classes aren't being used through pointers-to-the-base. Instead the base class is simply used to get a lot of built in functionality, although the classes aren't related in the normal sense. Inversion of control (and has-a relationships) is a more common way to do that nowadays (split the functionality of the base class into a number of interfaces -- pure virtual base classes -- and then have the objects that currently derive from the base class instead have member variables of those interfaces).
At the very least, you'll want to split the big base class into well-defined smaller classes and use those (like mixins), which sounds like your second option.
However, that doesn't mean rewrite all the other code that uses the blob base class all in one go. That's a big undertaking and you're likely to make small typos and similar mistakes. Instead, buy yourself copies of Working Effectively With Legacy Code and Large-Scale C++ Software Design, and do the work piecemeal.
From you question it is not too clear what the problem is - looking at the title (Using non-abstract class as base) I can tell you that using an abstract class (non pure virtual - when you talk about interfaces in C++ I am assuming pure virtual abstract classes) as base makes sense only if there is common functionality you can share between subclasses - meaning that a number of classes extend the same abstract class inheriting the common implementation. If that's not the case (and you're pretty confident it's never gonna happen) then it doesn't make sense to use an abstract class.
If you can extract out some of the functionality in you big class in such a way that leads to (even potential) code reuse then it could make sense - otherwise I wouldn't see the point.
Should be a newbie question...
I have existing code in an existing class, A, that I want to extend in order to override an existing method, A::f().
So now I want to create class B to override f(), since I don't want to just change A::f() because other code depends on it.
To do this, I need to change A::f() to a virtual method, I believe.
My question is besides allowing a method to be dynamically invoked (to use B's implementation and not A's) are there any other implications to making a method virtual? Am I breaking some kind of good programming practice? Will this affect any other code trying to use A::f()?
Please let me know.
Thanks,
jbu
edit: my question was more along the lines of is there anything wrong with making someone else's method virtual? even though you're not changing someone else's implementation, you're still having to go into someone's existing code and make changes to the declaration.
If you make the function virtual inside of the base class, anything that derives from it will also have it virtual.
Once virtual, if you create an instance of A, then it will still call A::f.
If you create an instance of B and store it in a pointer of type A*. And then you call A*::->f, then it will call B's B::f.
As for side effects, there probably won't be any side effects, other than a slight (unnoticeable) performance loss.
There is a very small side effect as well, there could be a class C that also derives from A, and it may implement C::f, and expect that if A*::->f was called, then it expects A::f to be called. But this is not very common.
But more than likely, if C exists, then it does not implement C::f at all, and in which case everything is fine.
Be careful though, if you are using an already compiled library and you are modifying it's header files, what you are expecting to work probably will not. You will need to recompile the header and source files.
You could consider doing the following to avoid side effects:
Create a type A2 that derives from A and make it's f virtual
Use pointers of type A2 instead of A
Derive B from type A2.
In this way anything that used A will work in the same way guaranteed
Depending on what you need you may also be able to use a has-a relationship instead of a is-a.
There is a small implied performance penalty of a vtable lookup every time a virtual function is called. If it were not virtual, function calls are direct, since the code location is known at compile time. Wheras at runtime, a virtual function address must be referenced from the vtable of the object you're calling upon.
To do this, I need to change A::f() to
a virtual method, I believe.
Nope, you do not need to change it to a virtual method in order to override it. However, if you are using polymorphism you need to, i.e. if you have a lot of different classes deriving from A but stored as pointers to A.
There's also a memory overhead for virtual functions because of the vtable (apart from what spoulson mentioned)
There are other ways of accomplishing your goal. Does it make sense for B to be an A? For example, it makes sense for a Cat to be an Animal, but not for a Cat to be a Dog. Perhaps both A and B should derive from a base class, if they are related.
Is there just common functionality you can factor out? It sounds to me like you'll never be using these classes polymorphically, and just want the functionality. I would suggest you take that common functionality out and then make your two separate classes.
As for cost, if you're using A ad B directly, the compile will by-pass any virtual dispatching and just go straight to the functions calls, as if they were never virtual. If you pass a B into a place expecting `A1 (as a reference or pointer), then it will have to dispatch.
There are 2 performance hits when speaking about virtual methods.
vtable dispatching, its nothing to really worry about
virtual functions are never inlined, this can be much worse than the previous one, function inlining is something that can really speed things in some situations, it can never happen with a virtual function.
How kosher it is to change somebody else's code depends entirely on the local mores and customs. It isn't something we can answer for you.
The next question is whether the class was designed to be inherited from. In many cases, classes are not, and changing them to be useful base classes, without changing other aspects, can be tricky. A non-base class is likely to have everything private except the public functions, so if you need to access more of the internals in B you'll have to make more modifications to A.
If you're going to use class B instead of class A, then you can just override the function without making it virtual. If you're going to create objects of class B and refer to them as pointers to A, then you do need to make f() virtual. You also should make the destructor virtual.
It is good programming practise to use virtual methods where they are deserved. Virtual methods have many implications as to how sensible your C++ Class is.
Without virtual functions you cannot create interfaces in C++. A interface is a class with all undefined virtual functions.
However sometimes using virtual methods is not good. It doesn't always make sense to use a virtual methods to change the functionality of an object, since it implies sub-classing. Often you can just change the functionality using function objects or function pointers.
As mentioned a virtual function creates a table which a running program will reference to check what function to use.
C++ has many gotchas which is why one needs to be very aware of what they want to do and what the best way of doing it is. There aren't as many ways of doing something as it seems when compared to runtime dynamic OO programming languages such as Java or C#. Some ways will be either outright wrong, or will eventually lead to undefined behavior as your code evolves.
Since you have asked a very good question :D, I suggest you buy Scott Myer's Book: Effective C++, and Bjarne Stroustrup's book: The C++ Programming Language. These will teach you the subtleties of OO in C++ particularly when to use what feature.
If thats the first virtual method the class is going to have, you're making it no longer a POD. This can break things, although the chances for that are slim.
POD: http://en.wikipedia.org/wiki/Plain_old_data_structures