I have a corportative environment and make changes in axis2.xml and carbon.xml can generate impacts.
My problem is that WSO2 is responding the message in binary as an example:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<axis2ns1073:binary xmlns:axis2ns1073="http://ws.apache.org/commons/ns/payload">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</axis2ns1073:binary>
</soapenv:Body>
</soapenv:Envelope>
Is there any way or mediator I can resolve this without much impact on other projects within the ESB?
Looks like you have enabled the binary message builder/formatter..Is there any need to use them?
If you use ESB 4.7.0/4.8.X , all those versions are using Pass thru transport..
What is the ESB version you use? Try disable binary message builder and use default message builders/formatters.
If you use binary builders for any specific requirement then use builder mediator to build message if you want to process the message when it passing through the system.
Related
I am trying to use the Tsoap component within Talend to consume the API. I have tried the Soap UI Client (separate application) and was able to get the response.
However within the Tsoap component within the Soap Message, I have pasted the sample request and I get an error eery single time. Can anyone help!
" <soapenv:Envelope xmlns:soapenv=\"http://schemas.xmlsoap.org/soap/envelope/\"
xmlns=\"http://clients.mindbodyonline.com/api/0_5\">
<soapenv:Header/>
<soapenv:Body>
<GetSites>
<Request>
<SourceCredentials>
<SourceName>Test235</SourceName>
<Password>3IERKOFDNFEOFMKDFOEMFD=</Password>
<SiteIDs>
<int>-99</int>
</SiteIDs>
</SourceCredentials>
<XMLDetail>Full</XMLDetail>
<PageSize>0</PageSize>
<CurrentPageIndex>0</CurrentPageIndex>
</Request>
</GetSites>
</soapenv:Body>
</soapenv:Envelope>"
What am I doing wrong?? Can anyone help please.
Can you send the error what you are getting?
Try this if you haven't done (just a guess)
--> If you are using and HTTPS web service then make sure to setup the authentication( I used Trust serve with SLL and provided the keystore file path and password)
I know this might sound like a duplicate but despite the number of result for this research, I couldn't manage to find a working answer..
I'm using a Java Web service built with Axis (the first one), running on Tomcat v5.5 and a .Net client with some Web reference (not the service reference).
What I want to do is to have a look on the outgoing request from my client, the soap enveloppe.
So far, I tried to use soapUI, great tool, helped me a lot for other thing, but the structure of my web service is quite complexe (array of complexe datatypes) so I have no idea on how I could give him some parameters, here is an exemple of the generated request :
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.main.gimaweb.itrec.com" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">
<soapenv:Header/>
<soapenv:Body>
<web:televerserDocument soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<wsi xsi:type="urn:DocumentWSI" xmlns:urn="urn:DocumentWS">
<version xsi:type="xsd:string">?</version>
<documents xsi:type="doc:ArrayOf_tns1_DocumentWVO" soapenc:arrayType="urn:DocumentWVO[]" xmlns:doc="adress"/>
</wsi>
</web:televerserDocument>
</soapenv:Body>
</soapenv:Envelope>
But what i need is an array with data, so there is a lot of xml tag missing for that purpose. Maybe there is a way to generate a more complete sample request? (I don't know if I'm clear enough).
I also tried to use Fiddler, also a great tool but I never managed to get the soap enveloppe, I just got the WSDL from when I update the web reference.
I tried different kind of adresses like :
localhost:port
localhost.:port
ipv4.fiddler:port
hostname:port
But I guess the adress isn't the origin of the problem, I also used ISS Express instead of Visual Studio development server.
Finally, I tried to use some software named Membrane Moniter, but no way to get it, it's becoming quite old, maybe someone knows an alternative
Does someone have a clue on how to do this?
EDIT: And I also tried to use the TCP/IP Monitor on server side, but onece again, I only get the WSDL from the update on VS's side.. I do not really understand why.
EDIT: My Java Webservices are running on Tomcat v5.5, my ASP.Net client is a web application running on IIS Express
From doing some testing on SOAP requests to a webservice I created in Salesforce I note the response returned is of the following format.
Note my request function I called is GetMsgRQ
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns="http://soap.sforce.com/schemas/class/MyIntegrationServices">
<soapenv:Body>
<GetMsgRQResponse>
<result>
<acctId>001J000000leVpEIAU</acctId>
<acctName>MyTest</acctName>
</result>
</lGetMsgRQResponse>
</soapenv:Body>
</soapenv:Envelope>
Relating to this I wonder is it possible to add a SOAP:Header?
Also I note the response has created an element "GetMsgRQResponse" (adding "Response" to "GetMsgRQ". Is it possible to create/specify the SOAP:Body without this occuring? Can I just set what the whole SOAP body response will be or will Salesforce always add such additional elements as the "GetMsgRQResponse" here and "result"?
Thanks in advance for any help on this. I know I can use a HTTP Request to send a full SOAP envelope but for my requirement I need to just provide a response instead of doing so.
I don't believe you can directly add any kind SOAP headers in an Apex defined WebService methods.
If you have absolutely no other option you could construct your own custom SOAP response via a REST web service (via #RestResource annotation) but that is a pretty ugly solution.
Using Synapse 2.1, I am trying to transform an XML message with no header into a SOAP message with a header containing credentials to consume a web service. Something like this:
Synapse incoming message:
<SOAP-ENV:Envelope>
<SOAP-ENV:Body>
...TAGS...
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Synapse outgoing message:
<SOAP-ENV:Envelope>
<SOAP-ENV:Header>
<yta:Authentication>
<yta:UserName>srnm</yta:UserName>
<yta:Password>psswrd</yta:Password>
</yta:Authentication>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
...TAGS...
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
How could I configure Synapse to do it? I am successfully using a transform file to update the body of the message, but not to add a header to the output.
I tried using the header and property mediators in the configuration file, but I am not sure what is the way to go. Reading about the header mediator it says "At the moment set header only supports simple valued headers". Could this be the case?
Thanks
For the record, I ended up using a script mediator with an inline javascript script in the configuration file using the addHeader method. See below:
<script language="js">
<![CDATA[
var user = mc.getPayloadXML()..*::UserName.toString();
var psswd = mc.getPayloadXML()..*::Password.toString();
mc.addHeader(false, <yta:Authentication xmlns:yta="yta:namespace url"><yta:UserName>{user}</yta:UserName><yta:Password>{psswd}</yta:Password></yta:Authentication>);
]]>
</script>
You can use XSLT mediator to manipulate it. So add an XSLT transformation with required headers and it would add required headers. Or use Script mediator / Class mediator where you can manipulate message.
Please refer followings which will be useful.
http://wso2.org/forum/thread/10794
http://wso2.org/forum/thread/10843
If this xml structure is not needed.
you can use Http Headers you can use properties as below.
http://blog.thilinamb.com/2011/04/how-to-access-web-service-using-http.html
Looks like you want to secure the service. The easiest then, is to use username-token security. Go to the services dashboard in WSO2 ESB for your proxy service and secure it, using UT. Also see http://docs.wso2.org/wiki/display/ESB460/Sample+200%3A+Using+WS-Security+with+policy+attachments+for+proxy+services for a security sample
I have the WSDL file of the remote web service I need to call from a proxy service in the WSO2 ESB and would like to know if I need to construct the soap:Body's elements manually through XSLT/Enrich or there is a way to generate the soapenv:Body's contains from the WSDL and maybe replace '?' for the values.
For example, if you've used soapUI before you'll know that when you import a WSDL file in a project a soapenv:Envelope gets generated automatically with all the XML elements and question marks for their values. Same goes for the TryIt tool in the WSO2 ESB.
Here is an example of an auto-generated soapenv:Envelope in soapUI after importing WSDL:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:abc="http://abc.com/">
<soapenv:Header/>
<soapenv:Body>
<abc:RegisterCandidate>
<abc:NameFirst>?</abc:NameFirst>
<abc:NameMiddle>?</abc:NameMiddle>
<abc:NameLast>?</abc:NameLast>
<abc:PhoneHome>?</abc:PhoneHome>
<abc:EmailAddress>?</abc:EmailAddress>
<abc:Address1>?</abc:Address1>
<abc:Address2>?</abc:Address2>
<abc:City>?</abc:City>
<abc:State>?</abc:State>
<abc:ZipCode>?</abc:ZipCode>
<abc:Country>?</abc:Country>
</abc:RegisterCandidate>
</soapenv:Body>
</soapenv:Envelope>
Is this possible in the Proxy Service through any of the mediators available to read a WSDL and generate soapenv:Body with its XML tags (in the code above it would be abc:RegisterCandidate with its children)? I've done it with the use of the XSL templates, but it's manual and not very elegant.
I've found a few articles/blogs online about writing proxy services in the WSO2 ESB that call remote web services and what the developers were doing in there was to insert the XML elements needed in the soapenv:Body with the use of XSL templates to have the correct/full SOAP message that is then sent (send mediator) to the remote web service server.
Thank you.
There is no way to generate the soap body from the remote service's wsdl as in your requirement. But there is an easier way than using xslt. That is to use the payload factory mediator. You can define the payload and assign values using xpath as shown in the sample.