Project has been build successfully, but I got following error message while debugging in "Error in Workspace" pop-up window.
Error in Workspace:
Errors exist in active configuration of project "<project_name>". Proceed with launch?
I am using following version of Eclipse.
Eclipse IDE for C/C++ Developers
Version: Helios Service Release 2
I've imported this project as "C/C++ > Existing Code as Makefile Project".
Is anyone have any idea how to get rid of this error ?
Please let me know if I've missed something to mention here..
I meet the problem too, and now it is fixed simply by deleting the "Debug" or "Release" folder.These two folders ware build after compiling,but they seem not to refesh automaticaly.So I delete them and compile again,and fixed.
My environment is :eclipse neno 4.6.0,JDK 1.8.0_92 64 bit,c++ prject.
Just delete the Debug Folder and run it. This might allow the program to execute.
I had the same annoying problem, and I think I just found the solution:
go to the Problems tab
Right-click on Errors
Delete the errors
I had cppcheck errors that prevented me from running my programs without this warning. Removing them solved the problem. And building again does not make the popup come back.
Related
I use VSCode(code editor, not IDE) for C++ with only Microsoft's C++ extension and today I have encountered a problem here. When I write the wrong syntax, the "PROBLEMS" panel does not show errors. It only shows errors on building the code. Earlier that wasn't the case. How do I fix this ?
Before building:
After building:
I got that error by Disable error squiggles. If you don't reach that error in my case, don't read anymore.
After ignoring, I got your problem:
To fix this, open settings.json file:
Scroll to the end, then set "C_Cpp.errorSquiggles": from Disabled to Enabled.
After reading the question, and the comments, my understanding is that you want Visual Studio Code to tell you when you make a mistake on the sintax, without having to compile the project.
What could be wrong is your C++ IntelliSense, which is odd because it comes in bundle with the C/C++ extension from Microsoft. The extension itself might be disabled, corrupted during an aborted update, or uninstalled.
Have you tried the good old and helpful uninstall and reinstall the extension? That normally fixes my problems with extensions in Visual Studio and VS Code
Note: You have to install the extension first: C/C++ IntelliSense, debugging, and code browsing extension
This is because the C/C++ IntelliSense, debugging, and code browsing extension does not know about the current project.
Navigate to View | Command Palette, enter and select C/C++ Build and debug active file: Select
Project, and then select the correct project that you want to work with.
This will help you see the problems as you create your code without requiring you to run it.
The extension has to know that it is allowed to continuously check your code.
I hope this helps you in the future with other extensions too...
Try and close your current folder and open a different folder. Then come back to your original folder. This worked for me.
I'm having issues with setting up Eclipse for C++ editing. I am using Cygwin and Eclipse (obviously), and I've gotten to the point of making the example project Hello World. However, when I try to create a new project I always get the message "Launch Failed. Binary Not Found". I know this is a common issue, but why would the default hello world project work and not mine?
Thanks for any help.
First Build the project ( project menu in navigation bar)
then, A new folder named Binaries will appear now in project explorer. (refresh if needed)
Now you can try running your project, and no errors will appear.
more info here
Good afternoon,
There is an error that has been occasionally occurring right after my project successfully builds. This error states "Errors exist int he active configuration, proceed with Launch?" This error usually occurs after I get some errors in the build previously, fix/clean them, and rebuild again. It occurs between the build and launching the debugger, because if I am disconnected from the remote system, it pops up before it attempts connecting to GDB.
The project builds without issues, and if I restart eclipse, I am able to build and debug without a problem. The issue is that I end up losing all of my undo states and the general discomfort of having to restart eclipse all the time.
This seems like strictly an eclipse issue,
Things I've tried that have made no difference: Cleaning the project, deleting files, etc. This seems to be a bug in eclispe,
If anyone has any knowledge on how to get rid of this prompts, please advise,
Thank you,
I'm writing a C++ application using VS2010 on two dev computers - both are Win7 64bit SP1. I use git to sync the repositories.
On one of the machines the compiled executable (and also the test exec) stopped working with the following error, while on the other machine it works fine and I'm able to continue development.
The application was unable to start correctly (0xc000000d). Click OK to close the application.
I tried deleting the repository and cloning it again. I also made sure I have the same versions of Boost, git, Visual Studio. Also, I tried debugging (stepping in) but the error occurs before any line of code is reached.
Notice as far as I understand I'm tracking Visual Studio's solution\project configuration files as detailed here.
I'm at a loss, how would you debug this?
UPDATE 1:
Only the Debug version fails to run. The Release version runs fine
UPDATE 2: The executable that doesn't work does work on the other computer!
UPDATE 3: I've reinstalled VS2010 (exactly the same version) - didn't help. Surprisingly the compiled files are not the same size between the two machines.
I got the same problem as you mentioned.
My solution:
Clean the manifest file and rebuild
In the property page-> Manifest tool -> make sure "Additional Options" is set to nothing.
(I set it as "/validate_manifest" before).
Or you can try "Embed Manifest -> NO", rebuild and then set back to Yes. It sounds to be ridiculous, but it really works sometimes. I don't know why.
I got the same phenomenon suddenly without a warning on Win7 / VS2010 / C++. Debug App couldn't be launched, got 0xC000000D at initializing and loading multiple dlls. Found one base dll of my own responsible, played around with linker settings. Modifying settings, incremential rebuild -> app starts, rebuild all -> app crashes again. After setting "generate manifest" to "no" in the linker settings the sample app works, but the main app still crashes. After setting "generate manifest" to "no" for the most of my dlls -> the app starts in debug mode again. The stuff is very spurious, because some dlls need the modified settings others do not.
Have a look at the top two answers to this question
Program crashes with 0xC000000D and no exceptions - how do I debug it?
On the machine where it fails, try running the debug executable NOT under the debugger, and update your question to say what happens. If it crashes, are you able to then attach the debugger whilst the message box is still there and get a stack trace that tells you what function it is crashing in?
This is the weirdest thing....
Try deleting the "ipch" directory and then rebuilding.
Hope it works for you, I have wasted hours on this.
disabling/enabling precompiled headers fixed the issue for me.
I was facing crash on Debug x64 only - I guess it was related to an upgrade from boost 1.50 to 1.52, while keeping pch files.
in my case i got it working again by setting generate manifest to NO on all projects
I have changed "Embed manifest" setting to NO and then back to YES but it didn't help.
For me setting General->Platform Toolset to Windows SDK 7.1 for my program and all dependent libraries compiled with it helped.
It's the ipch just delete the entire folder and it will clear it up. I was confused for a while too.
I saw the error while using OpenCV library compiled with MSVC2010 in a project running on MSVC2015. Changing project configuration properties->General->Platform toolset from Visual Studio 2015(v140) to Visual studio 2010(v100) resolved the error.
I have downloaded the latest Eclipse CDT release (Helios) and wanted to try my luck with some C++ programming (haven't done that in ages).
I tried to do the "Hello World" project, but I got stuck quite fast.
First thing - the #include <stdio.h> and #include <stdlib.h> got marked with an 'Unresolved Symbol' warning. So I found the place where I can add include paths and pointed it to these headers from the Visual Studio installation I have.
After that, it looked fine but:
I don't see compilation errors/warnings in the Problems tab.
I cannot run the code - I get 'Launch failed. Binary not found' error
My question is simple - what are the steps I really need to do to get my code compiled, linked and executed?
I tried looking for it on Eclipse's site, but didn't find any reference to that.
I'm making a guess here, that your are running on Windows, because that particular error seems to be a windows related one.
You seem to be missing the basic toolchain needed by the CDT to actually build the project. You need some files Before You Get Started. I suggest the mingw installer, as it is simple, and lets you actually build Windows compatible binaries.
Check out the link above, and then make sure your project links to the toolchain. Hope that helps.
A starting point could be:
File -> New -> c++ project
Type a name for the project, select Hello World c++ Project under Project Type and click Finish.
Right click on the project -> Run As -> Local C++ application (or just click the Run button on the toolbar).
I was getting the same error until I ran the "Build All" command. That command created two new folders, Debug and Release. Then when I clicked the "Debug" button, it asked me which one I wanted to run and I selected "Debug" and it ran perfectly.
It seems like the binary it couldn't find was created from the "Build All" command.