I am building a frontend client for Jira and am running into some conflicting authentication methods I think.
I have setup the OAuth2 authentication method for logging in and hitting the Jira API. I have a button on a login page that redirects to Jira, you log in, hit "allow" and are redirected to my app. This step completes fine, I have a token and a secret and can make api calls just fine.
Next, I make an api call to get the user data, which returns fine. One of the pieces of data is a set of avatar urls. I put one of the urls into my site's markup. Here is where the problem begins.
If my browser session that I used to login is still active, I get an avatar. BUT if not, I get an "anonymous" avatar from Jira.
All the while, my OAuth token/api calls all seem to return fine.
This makes sense as Jira is using cookie based auth and I am not. So if that cookie dies in my browser, the call to the image will fail.
My ultimate question is how to handle this? Is this my responsibility to put an expiration on the token? What happens if they select "Stay logged in"? I don't think I get that knowledge on the OAuth side.
I kind of feel like I am missing something but I cannot figure out what. This seems like a problem that has been fixed or isn't even really a problem.
One solution would be just to switch to a cookie based authentication but OAuth seems more secure.
I've also tried directly hitting it from my server but that also yields an anon avatar. As does a curl with the access token. Maybe I didn't provide it in the correct way?
Any thoughts or ideas on this would be greatly appreciated. Thanks in advance.
I'm very novice when it comes to web applications and ASP.
Recently, I've been experimenting with the Microsoft Sync Toolkit to synchronize databases over a OData web service.
The obvious question here is: Once the service is set up and published - so it is open for anyone knowing the URL - how to prevent unauthorized users from accessing this service.
Please note: Basic authentication of forms authentication - as far my little web development knowledge reaches - doesn't seem to be appropriate for this task, as it's not a web page that the client is trying to reach - where the page can display / or re-direct a logon request - it's a service that we are accessing here.
To make things more difficult, for the client-side syncing I'm using a 3rd party library/sync-provider that only accepts a URL for the service. So, there's no way (I think) I can experiment with incorporating login credentials inside a request header etc.
I assume the best bet would be embedding the login credentials inside the URL and use that for the 3rd party library.
Can somebody please direct me how to to set up such thing on the server? I would prefer to have somehow somewhere in the server-side code a place where I can check for the credentials and based upon it to proceed or abort (return 401) the service request.
I could not find any place where to hook such code into the sync service. Although somebody in MSDN suggested to handle the _OnBeginSyncRequest event, there is no way to access the web-request header from within that method.
Is there by-any-chance a global object accessible from everywhere from which I can access the request header? Could anyone please help with this?
And last, I would prefer a plain User / Password string pair. It should not necessarily (or rather not) have anything to do with windows or directory accounts. I would prefer in my code to simple check against plain strings, such if(userStr == "Authenticated user" && passwordStr == "Correct Password").
if you are using SOAP web service, you can use WS-Security usernametoken which adds your user name and password to the request header, otherwise you can add username and password as parameters in your webservice and then simply validate it on the server side. i.e.
instead of
bool SyncData(datatable)
it becomes
bool SyncData(datatable, username, password)
note for web service you will authenticate per call, if you want to do it per session, you need first login with username password, retrieves a token than on each subsequent call your service with the token.
You would also use SSL to secure the channel so username and password aren't transmitted as plain text.
This is a similar situation to the one raised in this question:
Javascript Calling a Rest API with App Name and App Password - How Can i Secure it
Here is the architecture overview:
The site is Html5/jquerymobile
It contacts what I call a "Wrapper" service.... This is a REST API I wrote in C#, to contact another 3rd party REST API. I do this because there are credentials in the Header and the API uses Basic Authentication. Credentials are therefore not publicized as they are only known server-side.
My "Wrapper" service does not currently implement any additional security. It is currently accessible from anywhere. The easiest and quickest way to lock it down is to restrict by IP, so no other IP anywhere except the server can actually contact my wrapper service.
The questions:
Is the locking by IP the only way to ensure that the API won't get hammered if it was otherwise accessible from anywhere?
If I convert this using Phonegap (which I have... and deployed successfully on Android), obviously the native app won't work if the web service is restricted.
Is there a way around this so I can allow traffic only from the mobile app, and not from any other source? I'm thinking along the lines of MD5 hash or something that could be sent to the wrapper API.. but unfortunately I'm thinking that info can easily be "sniffed".
Is my only viable option here to release the app as a web app, forcing browser use, thereby removing any concerns about allowing my web service to be hammered??
I believe the answer to this is a combination of a user token and encrypting the message through SSL.
The server can issue a valid user a token so we can identify him in future requests.
Encrypting it via SSL will ensure that this token cannot be sniffed.
https://security.stackexchange.com/questions/12531/ssl-with-get-and-post
frontend dev here with no experience with SSO so bear with me. Keen for a high-level recommendation on the following as I can appreciate it may vary.
We've got a client setting up SSO to login to our site, and Im trying to understanding how I can safely call their webservices for user info from our domain via AJAX. Looking at their services they're asking for a User ID and Password which I dont think is usable/feasible as I assume our system would need to expose the password to the frontend which doesnt seem secure... They mentioned they could pass these via http but that doesnt seem secure either!
Is there some sort of way we can validate the webservice all via SSO or is there some other way?
Thanks
Further my comment, we're pushing ahead with using the shared encryption method used for our SSO (TripleDES in ECB mode) to encrypt the token in the webservice request
I am building a web application with a services layer. The services layer is going to be built using a RESTful design. The thinking is that some time in the future we may build other applications (iPhone, Android, etc.) that use the same services layer as the web application. My question is this - how do I implement login? I think I am having trouble moving from a more traditional verb based design to a resource based design. If I was building this with SOAP I would probably have a method called Login. In REST I should have a resource. I am having difficulty understanding how I should construct my URI for a login. Should it be something like this:
http://myservice/{username}?p={password}
EDIT: The front end web application uses the traditional ASP.NET framework for authentication. However at some point in the authentication process I need to validate the supplied credentials. In a traditional web application I would do a database lookup. But in this scenario I am calling a service instead of doing a database lookup. So I need something in the service that will validate the supplied credentials. And in addition to validating the supplied credentials I probably also need some sort of information about the user after they have successfully authenticated - things like their full name, their ID, etc. I hope this makes the question clearer.
Or am I not thinking about this the right way? I feel like I am having difficulty describing my question correctly.
Corey
As S.Lott pointed out already, we have a two folded things here: Login and authentication
Authentication is out-of-scope here, as this is widely discussed and there is common agreement. However, what do we actually need for a client successfully authenticate itself against a RESTful web service? Right, some kind of token, let's call it access-token.
Client) So, all I need is an access-token, but how to get such RESTfully?
Server) Why not simply creating it?
Client) How comes?
Server) For me an access-token is nothing else than a resource. Thus, I'll create one for you in exchange for your username and password.
Thus, the server could offer the resource URL "/accesstokens", for POSTing the username and password to, returning the link to the newly created resource "/accesstokens/{accesstoken}".
Alternatively, you return a document containing the access-token and a href with the resource's link:
<access-token
id="{access token id goes here; e.g. GUID}"
href="/accesstokens/{id}"
/>
Most probably, you don't actually create the access-token as a subresource and thus, won't include its href in the response.
However, if you do so, the client could generate the link on its behalf or not? No!
Remember, truly RESTful web services link resources together in a way that the client can navigate itself without the need for generating any resource links.
The final question you probably have is if you should POST the username and password as a HTML form or as a document, e.g. XML or JSON - it depends... :-)
You don't "login". You "authenticate". World of difference.
You have lots of authentication alternatives.
HTTP Basic, Digest, NTLM and AWS S3 Authentication
HTTP Basic and Digest authentication. This uses the HTTP_AUTHORIZATION header. This is very nice, very simple. But can lead to a lot of traffic.
Username/Signature authentication. Sometimes called "ID and KEY" authentication. This can use a query string.
?username=this&signature=some-big-hex-digest
This is what places like Amazon use. The username is the "id". The "key" is a digest, similar to the one used for HTTP Digest authentication. Both sides have to agree on the digest to proceed.
Some kind of cookie-based authentication. OpenAM, for example, can be configured as an agent to authenticate and provide a cookie that your RESTful web server can then use. The client would authenticate first, and then provide the cookie with each RESTful request.
Great question, well posed. I really like Patrick's answer. I use something like
-/users/{username}/loginsession
With POST and GET being handled. So I post a new login session with credentials and I can then view the current session as a resource via the GET.
The resource is a login session, and that may have an access token or auth code, expiry, etc.
Oddly enough, my MVC caller must itself present a key/bearer token via a header to prove that it has the right to try and create new login sessions since the MVC site is a client of the API.
Edit
I think some other answers and comments here are solving the issue with an out-of-band shared secret and just authenticating with a header. That's fine in many situations or for service-to-service calls.
The other solution is to flow a token, OAuth or JWT or otherwise, which means the "login" has already taken place by another process, probably a normal login UI in a browser which is based around a form POST.
My answer is for the service that sits behind that UI, assuming you want login and auth and user management placed in a REST service and not in the site MVC code. It IS the user login service.
It also allows other services to "login" and get an expiring token, instead of using a pre-shared key, as well as test scripts in a CLI or Postman.
Since quite a bit has changed since 2011...
If you're open to using a 3rd party tool, and slightly deviating from REST slightly for the web UI, consider http://shiro.apache.org.
Shiro basically gives you a servlet filter purposed for authentication as well as authorization. You can utilize all of the login methods listed by #S.Lott, including a simple form based authentication.
Filter the rest URLs that require authentication, and Shiro will do the rest.
I'm currently using this in my own project and it has worked pretty well for me thus far.
Here's something else people may be interested in.
https://github.com/PE-INTERNATIONAL/shiro-jersey#readme
The first thing to understand about REST is that its a Token based resource access.Unlike traditional ways, access is granted based on token validation. In simple words if you have right token, you can access resources.Now there is lot of whole other stuff for token creation and manipulation.
For your first question, you can design a Restfull API. Credentials(Username and password) will be passed to your service layer.Service layer then validates these credentials and grant a token.Credentials can be either simple username/password or can be SSL certificates. SSL certificates uses the OAUTH protocol and are more secure.
You can design your URI like this-
URI for token request-> http://myservice/some-directory/token?
(You can pass Credentilals in this URI for Token)
To use this token for resource access you can add this [Authorization:Bearer (token)] to your http header.
This token can be utilized by the customer to access different component of your service layer. You can also change the expiry period of this token to prevent misuse.
For your second question one thing you can do is that you grant different token to access different resource components of your service layer. For this you can specify resource parameter in your token, and grand permission based on this field.
You can also follow these links for more information-
http://www.codeproject.com/Articles/687647/Detailed-Tutorial-for-Building-ASP-NET-WebAPI-REST
http://www.vinaysahni.com/best-practices-for-a-pragmatic-restful-api
I have faced the same problem before. Login does not translate nicely to resource based design.
The way I usually handle it is by having Login resource and passing username and password on the parameter string, basically doing
GET on http://myservice/login?u={username}&p={password}
The response is some kind of session or auth string that can then be passed to other APIs for validation.
An alternative to doing GET on the login resource is doing a POST, REST purists will probably not like me now :), and passing in the creds in the body. The response would be the same.