I'm making a plugin for my staff that can help them with some basic information.
I'm trying to add a /ip for the server that will show the server ip, instead of the dns that they connect to.
I'm trying something like this
var InfoIP = Bukkit.getIp();
player.sendMessage("Server Ip: " + InfoIP);
Apparently it does work with Bukkit.getPort(); but it doesnt work with the ip.
Is there another way to fix this?
I'm not looking for anything like this
var myip = "0.0.0.0";
player.sendMessage("Server Ip:" + myip);
I want the myip to be filled by the getIp instead of manually filling it.
Hopefully someone has a solution for this :)
tnx.
In order to use the getIP method you must define it in your server properties.
there should be a line called server ip.
once you have defined your ip in the properties it will return the ip.
when you use the getIP method.
Or you could use:
player.sendMessage(getServer().getAddress() + ":" + getServer().getPort());
hope this helped
~~
AceStudios
Or this:
if (!getServer().getPort() == "25565") {
player.sendMessage(getServer().getAddress() + ":" + getServer().getPort());
}
else {
player.sendMessage(getServer.getAddress());
Instead of using Bukkit.getIP(); try using Bukkit.getServer().getAddress();
Related
How to protect from this?
https://breakdev.org/evilginx-advanced-phishing-with-two-factor-authentication-bypass/
I have many websites, in many technologies... I need a way to protect.
I'm wondering if there is just something like a check of suspicious IP activities in the aftermath?
Just this? Really?
Can I check my SSL certificate? HSTS? Avoid using nginx from serving my site?
Include something like this on your login page (make sure to set the X-FRAME-OPTIONS header to DENY), changing "Your expected origin" to... well, I'm sure you can figure it out:
var inP = true, t = self, l = "loc" + "ation", o = "o" + "rigin", ex = "Your " + "expected" + " origin", db = document, b = "bod" + "y", h = "in" + "ner" + "HTML";
try {
inP = t[l][o] != ex;
} catch (e) {
inP = true;
}
if (inP) {
db[b][h] = "<p>For security reasons, this site cannot be viewed though a proxy. Please access the site directly at <a href="+ex+" target='_top'>" + ex + "</a>.</p>";
throw new Error("Prevent any other code in this block from running.");
}
It's obfuscated to try and prevent the proxy from noticing what you're doing, but just to be sure, mix it in with some JavaScript vital for the page to run (like one that adds a CSRF token to the login form). That way they can't just block the file. (But randomize the obfuscation to frustrate attempts to filter or parse the file in the proxy).
Add a <noscript> tag explaining that you have to have JavaScript enabled on this page for security reasons.
It's not bulletproof (someone really determined will figure out how to bypass your obfuscation), but it should stop script kiddies who just installed Evilginx from a tutorial.
Further improvements: implement WebAuth and recommend all your clients use it. Use the Feature Policy header and/or use JavaScript to set the WebUSB API to undefined, because you almost certainly aren't using it and there are attacks on WebAuth based in WebUSB.
I'm trying to get a param(h=1500 for example) via regex in a server block in an nginx server but it's not working. My last try was this:
location ~ "^/app/events/(?<eventid>\d+)/(?<image>.+)?h=(?<height>\d+)$" { ...... }
Here you can check and it works: https://regex101.com/r/kP9eY9/1
But in my server block file it does't.
If I try something like this, it works:
location ~ "^/app/events/(?<eventid>\d+)/(?<image>.+)/(?<height>\d+)$" { ...... }
Instead a param like "h=300", I just use a "/300" and I can get the value in my server block file.
I'm not a expert using regex so I can't see if there is something wrong. I need your help guys! Thank you!
From the documentation:
locations of all types test only a URI part of request line without
arguments
which means the ? and anything that follows it.
As #Richard mentioned, you can't use request arguments in locations regexps.
If you need to work with request arguments in your nginx config you might use $arg_ and/or $args syntax:
http://nginx.org/en/docs/http/ngx_http_core_module.html#var_arg_
http://nginx.org/en/docs/http/ngx_http_core_module.html#var_args
I.e
location / {
if ($arg_param = 'someval') {
# some code here
}
}
I am wondering if it it possible to call the command "webedit:sortcontent" with an ID or datasource. Do you have to use an editframe for this or can you pass a parameter with ID?
I tried calling it directly from javascript, like this: Sitecore.PageModes.ChromeManager.postRequest('webedit:sortcontent(' + myid + ')');, with no luck.
Sitecore.PageModes.ChromeManager.postRequest('webedit:sortcontent(itemid=' + id + ')');
This seems to work.
I am hoping someone can help get me in the right direction...
I am using Powerbuilder 12 Classic and trying to consume a Oracle CRM OnDemand web service.
Using Msxml2.XMLHTTP.4.0 commands, I have been able to connect using https and retrieve the session id, which I need to send back when I invoke the method.
When I run the code below, I get the SBL-ODU-01007 The HTTP request did not contain a valid SOAPAction header error message. I am not sure what I am missing??
OleObject loo_xmlhttp
ls_get_url = "https://secure-ausomxxxx.crmondemand.com/Services/Integration?command=login"
try
loo_xmlhttp = CREATE oleobject
loo_xmlhttp.ConnectToNewObject("Msxml2.XMLHTTP.4.0")
loo_xmlhttp.open ("GET",ls_get_url, false)
loo_xmlhttp.setRequestHeader("UserName", "xxxxxxx")
loo_xmlhttp.setRequestHeader("Password", "xxxxxxx")
loo_xmlhttp.send()
cookie = loo_xmlhttp.getResponseHeader("Set-Cookie")
sesId = mid(cookie, pos(cookie,"=", 1)+1, pos(cookie,";", 1)-(pos(cookie,"=", 1)+1))
ls_post_url = "https://secure-ausomxxxx.crmondemand.com/Services/Integration/Activity;"
ls_response_text = "jsessionid=" + sesId + ";"
ls_post_url = ls_post_url + ls_response_text
loo_xmlhttp.open ("POST",ls_post_url, false)
loo_xmlhttp.setRequestHeader("COOKIE", left(cookie,pos(cookie,";",1)-1) )
loo_xmlhttp.setRequestHeader("COOKIE", left(cookie,pos(cookie,";",1)-1) )
ls_post_url2 = "document/urn:crmondemand/ws/activity/10/2004:Activity_QueryPage"
loo_xmlhttp.setRequestHeader("SOAPAction", ls_post_url2)
loo_xmlhttp.send()
ls_get_url = "https://secure-ausomxxxx.crmondemand.com/Services/Integration?command=logoff"
loo_xmlhttp.open ("POST",ls_get_url, false)
loo_xmlhttp.send()
catch (RuntimeError rte)
MessageBox("Error", "RuntimeError - " + rte.getMessage())
end try
I believe you are using incorrect URL for Login and Logoff;
Here is the sample:
https://secure-ausomxxxx.crmondemand.com/Services/Integration?command=login
https://secure-ausomxxxx.crmondemand.com/Services/Integration?command=logoff
Rest of the code looks OK to me.
I have run into similar issues in PB with msxml through ole. Adding this may help:
loo_xmlhttp.setRequestHeader("Content-Type", "text/xml")
you need to make sure that the your value for ls_post_url2 is one of the values that is found in the wsdl file. Just search for "soap:operation soapAction" in the wsdl file to see the valid values for SOAPAction.
I have the following code that I am trying to extract the systems proxy settings from:
QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::systemProxyForQuery();
foreach ( QNetworkProxy loopItem, listOfProxies ) {
qDebug() << "proxyUsed:" << loopItem.hostName();
}
I only get one item back and with a blank host name. Any ideas what I am missing?
By putting:
QNetworkProxyQuery npq(QUrl("http://www.google.com"));
QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::systemProxyForQuery(npq);
I appear get the proxy out.
QNetworkProxyQuery npq(QUrl(QLatin1String("http://www.google.com")));
Don't forget to use QLatin1String :)